Professional Documents
Culture Documents
00DF1BA3
00DF1BA3
00DF1BA3
Issued to:
Applicant: Licensee:
WAGO Kontakttechnik GmbH & Co. KG WAGO Kontakttechnik GmbH & Co. KG
Hansastraße 27 Hansastraße 27
32423 Minden/westfalen, Germany 32423 Minden/westfalen, Germany
The product and any acceptable variation thereto is specified in the Annex to this certificate and the
documents therein referred to.
DEKRA hereby declares that the above-mentioned product has been certified on the basis of:
- a type test according to the standard EN 60838-2-2:2006, EN 60838-2-2:2006/A1:2012,
EN 60838-1:2017 and EN 60838-1:2017/A1:2017
- an inspection of the production location according to CENELEC Operational Document CIG 021
- a certification agreement with the number 900220
DEKRA hereby grants the right to use the KEMA-KEUR certification mark.
The KEMA-KEUR certification mark may be applied to the product as specified in this certificate for the
duration of the KEMA-KEUR certification agreement and under the conditions of the KEMA-KEUR
certification agreement.
This certificate is issued on 4 December 2018 and expires upon withdrawal of one of the above mentioned
standards.
j
B.T.M. Holtus
<
H.R.M. Barends
Managing Director Certification Manager
ACCREDITED BY THE
DUTCH ACCREDITATION
COUNCIL
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The Netherlands
T +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
ANNEX TO KEMA-KEUR CERTIFICATE 71-106226 page 1 of 2
Product data
Product : 1 – 3 pole(s) PCB terminal block for LED module
Trade name(s) : WAGO
Type(s)/model(s) : 2059-090..., 2059-301..., 2059-302..., 2059-303..., 2059-321...,
2059-322... and 2059-323...
Rated current : 3A
Nature of supply : ac
Connecting capacity : 0,14...0,5 mm²
Temperature range : -60...+105 °C
Material : thermoplastic material
Description : terminal for SMD technology
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The Netherlands
T +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
ANNEX TO KEMA-KEUR CERTIFICATE 71-106226 page 2 of 2
TESTS
Test requirements
EN 60838-2-2:2006
EN 60838-2-2:2006/A1:2012
EN 60838-1:2017
EN 60838-1:2017/A1:2017
Test result
The test results are laid down in DEKRA test file 222945200.
Additional information
Item numbers may be denoted with or without leading zeros.
e.g. 2059-301/998-403 or 2059-0301/0998-0403.
Conclusion
The examination proved that all requirements were met.
Factory locations
Wago Elwag
Innowacyjna 2
55-330 Wroblowice, Poland
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The Netherlands
T +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
Responsible CB:
OD ECS 040-1
ed. May 2013
E
Date of issue................................... : 2019-01-08
Tested by (name + signature).......... : A.P. van der Veen
Witnessed by (name + signature).... : -
Approved by (name + signature) ..... :
Supervised by (name + signature)... :
Testing Laboratory........................ :
T. Drost
- H
DEKRA Certification B.V.
Address .......................................... : Meander 1051, 6825 MJ Arnhem, The Netherlands
Testing procedure ........................... : CCA-TL IECEE-CBTL TMP WMT SMT
Testing location ............................ : DEKRA Certification B.V.
Address .......................................... : Meander 1051, 6825 MJ Arnhem, The Netherlands
Applicant ....................................... : Wago-Kontakttechnik GmbH & Co. KG
Address .......................................... : Hansastrasse 27, 32423 Minden/Westfalen, Germany
Manufacturer ................................. : Wago-Kontakttechnik GmbH & Co. KG
Address .......................................... : Hansastrasse 27, 32423 Minden/Westfalen, Germany
Product.......................................... : 1 - 3 pole(s) PCB terminal block for LED module
Model/Type reference ..................... : 2059-090…; 2059-301…; 2059-302…; 2059-303…
2059-321…; 2059-322…; 2059-323…
Trademark ...................................... : WAGO
Ratings ........................................... : for 1 pole: 250 V~; 3 A; PD3; OVC III (4 kV)
320 V~; 3 A; PD2; OVC III (4 kV)
630 V~; 3 A; PD2; OVC II (4 kV)
for 2 and 3 poles: 37 V~; 3 A; PD2; OVC III (800 V)
doc20190118155918273.doc page 1 of 1
Test Report issued under the responsibility of:
TEST REPORT
IEC 60838-2-2
Miscellaneous lampholders
Part 2-2: Particular requirements:
Connectors for LED-modules
Report Number. ............................ : 2229452.50
Date of issue ................................. : 2018-11-21
Total number of pages .................. 21 pages
Test item description...................... : 1 – 3 pole(s) PCB terminal block for LED module
Trade Mark ...................................... : WAGO
Manufacturer................................... : Wago-Kontakttechnik GmbH & Co. KG
Hansastrasse 27, 32423 Minden/Westfalen, Germany
Model/Type reference..................... : 2059 series
Ratings............................................ : for 1 pole:
250 V~; 3 A; PD3; OVC III (4 kV)
320 V~; 3 A; PD2; OVC III (4 kV)
630 V~; 3 A; PD2; OVC II (4 kV)
for 2 and 3 poles:
37 V~; 3 A; PD2; OVC III (800 V)
Responsible Testing Laboratory (as applicable), testing procedure and testing location(s):
E
H
Approved by (name, function, signature)...: T. Drost
Summary of testing:
WAGO
2059
General remarks:
"(See Enclosure #)" refers to additional information appended to the report.
"(See appended table)" refers to a table appended to the report.
When differences exist; they shall be identified in the General product information section.
2059-090: interconnection bridge with a pin length of 15,3 mm. Last digits in type designation correspond
with pole number 1-6. Additional suffix number /0018-0000 for pin length 17,5 mm. Additional suffix
number /0021-0000 for pin length 20,5 mm.
Ratings are outside the scope of IEC 60838-2-2 therefore also the IEC 60598-1 cl.15 was taken into
account to cover the higher ratings.
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
3 GENERAL REQUIREMENTS P
Connectors for LED-modules shall be so designed P
and constructed that in normal use they function
reliably and cause no danger to persons or
surroundings
Compliance is checked by the tests specified: P
5 STANDARD RATINGS P
5.1 Maximum rated voltage is 50 V a.c. see general product P
information for details
5.2 Rated current between 10 mA and 3 A 3A P
5.3 The rated operating temperature range is -30°C to -60…+105 °C P
+65°C
Indoor use is exempt from lower limit N/A
For relevant application notice and symbol see IEC N/A
60598-1.
6 CLASSIFICATION P
Unenclosed connectors for LED-modules P
Enclosed connectors for LED-modules N/A
Partly reinforced insulated connectors for LED- N/A
modules
Reinforced insulated connectors for LED-modules N/A
Non-polarized connector for LED-modules P
Polarized connector for LED-modules N/A
7 MARKING P
7.1 Connectors for LED-modules marked with: P
a) mark of origin P
b) unique catalogue number or identifying P
reference
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
7.2 The following information given on the connectors for LED-modules or available in P
manufacturer’s catalogue:
a) the rated voltage and the rated pulse voltage, if P
applicable
For polarized connectors: the rated voltage and the N/A
pair of rated pulse voltage
b) the rated current in amperes P
c) the rated operating temperature “T”, if greater -60…+105 °C P
than 65° C, in steps of 10° C
d) the conductor sizes for which the terminals are 0,14…0,5 mm2 P
designed
e) the high voltage arrow close to the relevant N/A
terminal for polarized lampholders, if applicable
Required symbol used: P
– for voltage P
– for current P
– for wattage N/A
For connectors for LED-modules in equipment P
where a higher degree of availability is expected,
distances for impulse withstand category III may be
applicable. This information has to be indicated in
the manufacturer’s catalogue or the like
Enclosed reinforced insulated connectors offer an N/A
adequate level of protection for use in luminaries
where they are accessible in normal use. This in-
formation shall be indicated in the manufacturer’s
catalogue or the like.
For parity reinforced insulated connectors, suffi-cient N/A
creepage distances and clearances to outer
accessible surfaces will require additional protec-
tion to some parts of the connector by the luminaire
design or by use of additional attachment(s) or
cover(s). This information has to be indicated in the
manufacturer’s catalogue or the like
The instructions supplied contain the information P
required to ensure correct mounting and operation
of the connectors for LED-modules
The marking according to 7.1 and 7.2 durable and legible: P
– after test with water, 15 s P
– after test with petroleum spirit, 15 s P
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
9 TERMINALS P
The Connectors for LED-modules provided with: P
– terminals with screw clamping N/A
– screwless terminals of spring or wedge type P
– tabs or pins for push-on connections N/A
– posts for wire wrapping N/A
– soldering lugs N/A
– connecting leads (tails) N/A
Terminal screws and nuts have a metric thread N/A
The screwless terminals satisfactory with both rigid P
conductors and flexible cables or cords
Other means of connection N/A
(Example: a lampholder for extra low voltage halo-
gen lamps providing electrical connection to a metal
part of the luminaire during lampholder assem-bly).
9.2 Terminals with screw clamping comply with the re- see annex 1 N/A
quirements of clause 14 of IEC 60598-1
Screwless terminals of spring or wedge type com- see annex 2 P
ply with the requirements of clause 15 of IEC 60598-
1
Tabs or pins for push-on connections comply with see annex 2 N/A
the requirements of clause 15 of IEC 60598-1
Posts for wire wrapping comply with the require- N/A
ment in IEC 60352-1
Soldering lugs comply with relevant requirements in N/A
IEC 60068-2-20
Connecting leads (tails) comply with the require- N/A
ments of 9.3
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
11 CONSTRUCTION P
11.1 Wood, cotton, silk, paper and similar materials not N/A
allowed as insulation unless suitably impregnated
Lacquer or enamel are not deemed to provide insu- N/A
lation
Minimum cross-sectional area for the connecting N/A
leads is 0.22 mm²
Minimum cross-sectional area for flat cables (rib-bon N/A
cables) is 0,09 mm²
11.2 Connectors for LED-modules dimensions comply N/A
with relevant IEC standard
11.4 Contacts and all other current-carrying parts are so P
constructed as to prevent excessive temperature
rise
Test for 1h with 1,25 times rated current. Tempera- Max. 24 K at 3,75 A P
ture rise does not exceed 45 K
11.5 Connectors designed with a barrel thread for shade N/A
holder rings and shade holder rings shall comply
with IEC 60399 (checked by gauges).
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
For connectors for LED-modules with a rated volt- Only for types 2059-302; P
age up to and including 50 V, the test voltage is 2059-322 (2 poles) and
500 V 2059-303; 2059-323 (3 poles)
Between the contacts of Connectors for LED- N/A
modules, the test voltage is twice the working volt-
age
For all other cases, the test voltage is 2U + 1000 V N/A
For enclosed and unenclosed reinforced insulated N/A
connectors, the test voltage shall be determined
from Table 10.2 of IEC 60598-1.
No flash-over or breakdown occurs P
Test for earth continuity according to 10.2 P
13 MECHANICAL STRENGTH P
Impact test, 4 blows applied by pendulum apparatus according to fig. D.1: P
- ceramic parts (100 mm) N/A
- other materials (150 mm) P
No serious damage P
Creepage distances and clearances not reduced P
below values of clause 15
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
— clearances N/A
For polarized connectors, creepage distances and N/A
clearances to external metal parts or the outer
surface of parts of insulating material may be
designed and shall be checked for each pole
separately.
Compliance is checked by tests with the rated P
pulse voltage of the holder.
Creepage distances are not less than the required P
minimum clearances
16 ENDURANCE P
Test by means of a commercial lamp cap, 10 cycles. 3,3 A P
The holder placed with a solid steel test cap in a
heating cabinet for 48 h at specified temperature
and loaded with 1,1 times the rated current. Cools
down for 24 h
For connectors for LED-modules which form an N/A
integral part of the luminaire, this temperature is
replaced by that measured according to the
operating conditions given in 12.4.2 of IEC 60598-1,
plus 10 K, with a tolerance of ± 5 °C
At the end of the test, the holder shows: P
- no reduction of protection against electric shock P
- no loosening of electrical contacts P
- no cracks, swelling or shrinking P
- compliance with the gauges of IEC 60061-3 as far N/A
as the exist
The resistance of contacts and connections does P
not exceed 0,045 Ω +(A*n)
Pull test for connecting leads with 20 N for 1 min N/A
according to 8.3
16.1 Connectors for LED-modules shall be capable of P
maintaining good electrical contact to the module
during rapid change of temperature
100 cycles temperature change test P
During the test, the connector for LED-modules shows: P
- no reduction of protection against electric shock P
- no loosening of electrical contacts P
- no cracks, swelling or shrinking P
16.2 Connectors for LED-modules with good electrical P
contact to the module
6 cycles damp heat test P
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
19 VIBRATIONS P
19.1 Connectors for LED modules shall be capable to P
satisfactorily maintain electrical contact to the
module when affected to vibration in normal use
Vibration test in accordance to IEC 60068-2-6 with 5 P
sweep cycles (10-500 Hz, 5 g, each axis) for 2 h
After vibration test contact making is still present P
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
IEC 60838-2-2
Clause Requirement + Test Result - Remark Verdict
terminal 1 2 3 4
terminal 1 2 3 4
Continued ageing: voltage drop after 10th alt. 25th cycle N/A
terminal 1 2 3 4
Continued ageing: voltage drop after 50th alt. 100th cycle N/A
terminal 1 2 3 4