Professional Documents
Culture Documents
B Inggris
B Inggris
B Inggris
Nama kelompok:
1. Chairul Akmal Fauzan
2. Putra Dali Pratama
3. Muhammad Iqbal Al-Ghifar
4. Agus Priyanto
5. Muhammad Ibrahim Adnan
XII TBSM 2
SMK AN-NUR KLAPANUNGGAL
JL.Klapanunggal, Cikahuripan, Kec. Klapanunggal , Kabupaten
Bogor , Jawa barat 16710
TABLE OF CONTENT
CHAPTER I...................................................................................i
a.Background .......................................................................iii
b.Problems............................................................................iv
c.Purposose...........................................................................v
CHAPTER II
a.Basic Theory......................................................................i
CHAPTER III.
a.Tool name and function.....................................................i
CHAPTER IV
a.Conclusions.......................................................................i
b.References.........................................................................i
CHAPTER I
A. BACKGROUND
B. PROBLEM FORMULATION
1.Basic Theory
2.get to know workshop tools
C. PURPOSE
A. BASIC THEORY
In general, the function of the workshop is to serve the technical needs of its customers. This
means that vehicle repair is the job of a repair shop and only takes place if the customer
encounters difficulties with his vehicle. For this reason, the system and administration of the
workshop is directed to the organization and facilities that can facilitate technical work in the
internal workshop. (Anonymous, 2011).
Nowadays, workshops are required to have a different mindset and operational concept. A
shabby and dirty workshop will be visited by few customers and maybe even no customers. Very
limited facilities make the workshop not
Credible.
and customers are reluctant to come to him. The facilities in question are not only technical
facilities for workshops but also facilities that must be available to customers. Like it or not, as long
as the vehicle is being worked on, the customer will wait and certainly don't want to lose time.
CHAPTER III
A ring wrench is a combination wrench and a ring wrench, one side with a ring wrench, and the
other with a wrench. Each head is the same size. Its function is to remove and loosen bolts.
A wrench that is often referred to as a wrench that can be adjusted to adjust the size of the bolt
head / nut. This key has the shape of a wrench, and is indeed used when, unable to use a wrench, or
when there is no other key available. This wrench has a head with one jaw fixed and the other jaw
adjustable.
3. Screwdriver (Obeng)
Screwdrivers are automotive repair tools that function to open or tighten screws. The two most
common types of screwdrivers are the plus screwdriver (philip screwdriver) and the minus
screwdriver (slotte screwdriver).
combination pliers, these pliers have many uses because they are called combination pliers.
5. Offset Ring Spanner (Kunci Ring)
Ring wrench is a key used to remove bolts or nuts, whose heads are closed (circular) with a total of
12 teeth. The ring wrench has an offset of about 45 degrees, with an angle of this size it allows the
spanner to be attached exactly to the nut/bolt, with the correct position. difficult.
CHAPTER III
Conclusion
Automotive workshop equipment is equipment in the from of tools that are useful for repairing
motorcycles or cars, as well as matters related to automotive workshops.
So the function of automotive workshop tools is a tool used to carry out and facilitate in terms of
dismantling, repairing, to reassembling engine components. In other words, more specifically, it
functions to open and tighten (lock) a bolt against the nut or vice versa.