Professional Documents
Culture Documents
Weg MVW3000 2019
Weg MVW3000 2019
MVW3000
Medium Voltage
Variable Speed Drive
www.weg.net
For new installations or retrofits, the MVW3000 is an efficient and robust solution to control the speed and streamline the
process, in addition to reducing energy consumption and maintenance costs.
The MVW3000 uses the multilevel technology of source voltage inverters through the Cascaded H-bridge (CHB) topology.
The output almost sinusoidal wave forms produced by the drive allow the application with new or existing synchronous
induction motors without requiring special insulation.
Technical Data
Characteristics
JJ Motor voltage: 1.15 kV to 13.8 kV1)
JJ Motor current: up to 340 A1)
JJ Fully integrated solution, reducing the system commissioning and start-up time
JJ Optimized input harmonics, without requiring filters (according to IEEE 519, IEC 61800-3, G5/4-1)
JJ The sinusoidal output voltage and current reduce the motor losses, vibration, torque pulsation and motor overheating
It includes all the parts of a medium-voltage speed variation system in a single cabinet.
2,415 mm
1,1 60 0 mm
00
m 1,50 0 mm
m
1,80 0 mm
60 0 mm
4,50 0 mm
up to eight channels
Input Disconnection2)
JJ Three-phase switch disconnector with fuses and vacuum Mechanical Characteristics
contactor - for input voltage of up to 6.9 kV
JJ Several cable arrangements with input and output through
JJ Mechanical interlock to prevent access to the MV the panel top or bottom
JJ Mechanical interlocks through KIRK switches between the
compartment with the switch in the ON position
JJ Cable input through the bottom or top
transformer, inverter and disconnection compartments
Notes: 1) Dimensions for the standard product with voltage up to 6.9 kV and current up to 200 A. For larger models, contact WEG.
2) You can use the existing cubicle or one separate from the inverter.
3) The input column is an optional item. Depending on the power, the cubicle can be positioned on the transformer.
Selection Guide
10,000 V 100
11 - Rectifier
11,000 V 110 Diode D
12,000 V 120
Notes: 1) Overload capacity: ND = Normal Duty: 115% for 13,200 V 132
60 seconds every 10 minutes.
2) Higher voltages and currents on request. 13,800 V 138
Waveforms
High quality of input current and voltage with extremely low harmonic levels and high power factor. Voltage and current output
wave forms close to the sinusoidal form, allowing the drive of motors with standard insulation.
Human-Machine Interface
P0100
100%
50%
Acceleration Time
180.0 s
0%
P0002= 1253 rpm P0003= 140.0A
1800
P0002:
200.0
Speed Refer: 1800 rpm
P0003: A Motor curre: 200.0 A
P0005: 60.0 Hz Inv. Status: Motor Rdy
Motor Frequ: 60.0 Hz
rpm Output Volt: 4160 V
Trend 13:38 Menu Trend 13:38 Menu Trend 13:38 Menu
Touch Keyboard
WEG team for SCADA (Supervisory Control and Data Acquisition) is able to add special functions to the MVW3000 by means of
software applications exclusively developed for the customer’s application, without requiring external PLCs for its automation, as
the MVW3000 itself can incorporate the PLC function.
WEG touch screen HMI provides the user with full access to graphic operating data in real time, allowing the control and
monitoring of the process variables, verification of the equipment status, generation of variable graphics in local mode (installed
on the front door of the MVW3000) or in remote mode (for example: installed on a command panel).
1780 55
500.8 3102
Technical Data
1,150 to 13,800 V
Input and output voltages
(±10%, -20% with output power derating)
Frequency 50 or 60 Hz (specify according to requirement) ±3%
Power supply Voltage unbalance between phases <3%
Cos Φ >0.95
Pollution grade 2
Microprocessor 32 bits
Control type Scalar (source voltage - V/F), Vector (with sensor and sensorless)
Control
Switching frequency 500 Hz
Communication Serial interface Fieldbus networks Modbus-RTU (incorporated software) via RS485 serial interface
Global Presence
With more than 30.000 employees worldwide, WEG is one of the largest electric motors, electronic equipments and systems
manufacturers. We are constantly expanding our portfolio of products and services with expertise and market knowledge. We
create integrated and customized solutions ranging from innovative products to complete after-sales service.
WEG’s know-how guarantees our Medium Voltage Variable Speed Drive is the right choice for your application and
business, assuring safety, efficiency and reliability.
Know More
High performance and reliable products to
improve your production process.
MV Cubicles
Soft-Starters
Transformers
For those countries where there is not a WEG own operation, find our local distributor at www.weg.net.
Cod: 50070340 | Rev: 02 | Date (m/y): 03/2018