Professional Documents
Culture Documents
Iwaki MD
Iwaki MD
GFRPP
IWAKI
MAGNETIC
DRIVE
PUMPS
MD
A worldwide best-seller, our high-quality
compact magnetic drive pumps
Our MD series leak-free compact magnetic pumps are a
worldwide best-seller and are used in medical equipment,
analyzers, constant-temperature baths and surface treat-
ment equipment for chemical feeding in more than thirty
countries worldwide.
MD-6·10 GFRPP
MD-15·20·30·40 GFRPP
1
IWAKI MAGNETIC DRIVE PUMPS MD
Driven magnet
Operating Principle
The centrifugal pump is driven by a pair of magnets which are incorporated in the impeller and
motor shaft. The sealless pump structure eliminates shaft seals such as conventional mechanical seals
because the pump chamber is shielded by the casings and the impeller is operated by the magnets.
The combined coupling torque of the drive magnet and impeller magnet gives sufficient driving
power against the motor torque.
Drive magnet
MD-55·70·100 GFRPP
2
Wide variation
Easy maintenance
The MD series has GFRPP wet ends. Hose connections and threaded
connections are available. A large selection of models offer a wide flow
range of 5.5-135L/min.
MD-40RZ 22 10 1.0
High head type
3
IWAKI MAGNETIC DRIVE PUMPS MD
Large
capacity
High-head type
type
Standard
type
Construction
Motor
Drive magnet
The 6- or 8-pole high power ferrite magnet
O ring drives the impeller through the rear casing.
Rear casing
GFRPP single-piece rear casing has the bearing mounted at the
bottom to support the spindle.
Spindle
Note: MD-6K, 6ZK and 10K models do not have the bearing.
Hose connection type Thread connection type Standard type High-head type RZ Large-capacity type RX
4
MD-6K·6ZK·10K GFRPP
6 MD-6K
10 MD-10K
Specifications (50Hz)
Hose connection Max. Capacity Max.Head S.G. Output Input Power source Mass
Model
Inlet (mm) Outlet (mm) L/min m W W kg
MD-6K 8.0 1.0 1.2 12
220 - 240V
MD-6ZK 14 14 5.5 2.1 5 14 0.9
1.1 Single phase
MD-10K 11 1.5 15
• Temperature range: 0 - 80˚C (Contact us for applications below zero.) • Limit of viscosity: 30 mPa·s (at 1 S.G.) • Ambient temperature: 0 - 40˚C
•Motor type: Capacitor-run induction motor • MD-6K, 6ZK and 10K do not have thread connection type.
Thrust ring
High density polyethylene
Dimensions (mm)
(82)
(82)
35
35
35
5
IWAKI MAGNETIC DRIVE PUMPS MD
2
Head (m)
6Z
K
1 10 K
6K
0
2 4 6 8 10 12 14
Capacity (L/min)
MD-6·MD-6Z·MD-10
Specifications (50Hz)
Hose connection Max. Capacity Max.Head S.G. Output Input Power Mass
Model
Inlet (mm) Outlet (mm) L/min m W W source Kg
MD-6 8.0 1.0 1.2 22 220 - 240V
3
MD-6Z 14 14 5.5 2.1 24 Single 0.9
1.1 phase
MD-10 11 1.5 6 35
• Temperature range: 0 - 80˚C (Contact us for applications below zero.) • Limit of viscosity: 30 mPa·s (at 1 S.G.)
MD-6 MD-10 • Ambient temperature: 0 - 40˚C • Motor type: Shaded pole motor • MD-6, 6Z and 10 do not have thread connection type.
(92)
(92)
45
45
6
MD-15·20·30·40 GFRPP
15 MD-15R
20 MD-20R
Specifications (50Hz)
Hose connection Threaded connection
Model R · RZ · RX R-M · RZ-M · RX-M Max. Capacity Max.Head S.G. Output Input Power source Mass
Inlet (mm) Outlet (mm) Inlet/Outlet Union (mm) (Note1) (L/min) (m) (W) (W) (kg)
MD-15R(M) 14 14 G3/4 13 16 2.4 1.3 10 26 1.6
MD-20R(M) 18 17 G3/4 16 27 3.1 1.1
MD-20RX(M) 26 26 G1 20 46 1.8 1.3 20 40 2.0
MD-20RZ(M) 17.5 17 G3/4 13 10 4.9 1.1
MD-30R(M) 20 20 G3/4 16 32 3.8 1.3 60
MD-30RX(M) 26 26 G1 20 62 2.9 1.1 45 70 220V - 240V Single phase 3.5
MD-30RZ(M) 17.5 17 G3/4 13 15 8.0 1.0 80
MD-40R(M) 20 20 G3/4 16 45 4.6 90
1.1
MD-40RX(M) 26 26 G1 20 75 3.3 65 85
3.9
MD-40RZ(M) 22 10 140
20 20 G3/4 16 1.0
MD-40RZ-5(M) 11 11.5 65 140
• Temperature range: 0 - 80˚C (Contact us for applications below zero.) • Limit of viscosity: 30 mPa·s (at 1 S.G.) • Ambient temperature: 0 - 40˚C
• Motor type: Capacitor-run induction motor
Note 1: The union size on above table shows the nominal diameter of the applicable PVC pipe. Heat resistance of the standard union is 0 - 55˚C and that of the heat resistant union is 0 - 80˚C.
O ring
FKM or EPDM MD - 30 RZ M - 220 E N
Impeller Spindle
Alumina ceramic Pump size
GFRPP
15, 20, 30, 40
Material of O ring
Front casing No mark: FKM (Standard)
GFRPP E: EPDM (Special order)
Type
R: Standard type
Motor
RZ-(5): High head type
No mark: single phase
RX: High capacity type
220: 220V - 240V single phase
Thrust ring
Alumina ceramic Bearing Connection
CFRPPS or PTFE No mark: Hose type
M: G thread connection
• GFRPP Glass fiber reinforced polypropylene
• CFRPPS Carbon fiber reinforced polyphenylene sulfide
• PTFE Polytetrafluoroethylene (“Teflon®,” etc.)
• FKM Fluorine rubber
• EPDM Ethylene propylene rubber
7
IWAKI MAGNETIC DRIVE PUMPS MD
30 MD-30R
40 MD-40R
10
40
RZ
8
30
Head (m)
RZ
20
RZ
4
40
R
2 30
20 R
15 R 30 R 4 0R
2 0R X X X
R
0
10 20 30 40 50 60 70
Capacity (L/min)
Dimensions (mm)
d
d
a c
a c a c
i i i
b g W b g W b g W
L L L
Model W H L a b c d e f g i Model W H L a b c d e f g i
MD-15R(M) 95 109
(114)
179.5
(179) - 50 68 55 39
(38.5) 21.5 92
(91.5) 2×ø5.6 MD-20RZ(M) 85 125 211 30 50 68 55 104 4×[5.7×8]
39.5 38.5
MD-20R(M) 85 115
(116.3)
208.5
(203) 30 50 68 55 38.5
(33) 28.5 101.5
(96) 4×[6×10] MD-30RZ(M) 130 230 120
MD-30R(M) 248 137 MD-40RZ(M) 120 40 64 100 60 4×ø9
120 130 40 64 100 60 48 31 4×ø9 150 235 38.5 44.5 128
MD-40R(M) 244 129 MD-40RZ-5(M)
119
Note1: Dimension of the ( ) inside are thread connection type. MD-20RX(M) 85 (122) 220 30 50 68 55 46.5 118 4×[5.7×8]
MD-30RX(M) 137 254 -
120 40 64 100 60 50 143 4×ø9
MD-40RX(M) (140) 250
Note1: Dimension of the ( ) inside are thread connection type.
Note2: RZ type (Hose connection) and RZM type (Thread connection type) are the same dimensions.
8
MD-55·70·100 GFRPP
55 MD-55R
7
Specifications (50Hz)
Hose connection Threaded connection
Power source
Model R · RZ R-M · RZ-M Max. Capacity Max.Head S.G. Output Input Mass
(Note1)
Inlet (mm) Outlet (mm) Inlet/Outlet Union (mm) (L/min) (m) (W) (W) Single phase Three phase (kg)
MD-55R(M) 60 5.6 90 130
26 26 G1 20 1.2 - 5.4
MD-55R-5(M) 70 8.2 90 170
MD-70R(M) 26 26 G1 20 86 6.7 150 235
1.0 220V - 240V 6.0
MD-70RZ(M) 20 20 G3/4 16 40 14.3 180 275
400V/440V
MD-100R(M) 120 8.6 1.2 260 245
26 26 G1 20 8.5
MD-100R-5(M) 135 11.7 1.1 260 365
• Temperature range: 0 - 80˚C (Contact us for applications below zero.) • Limit of viscosity: 30 mPa·s (at 1 S.G.) • Ambient temperature: 0 - 40˚C
• Motor type: Capacitor-run induction motor
Note 1: The union field shows the nominal diameter of the applicable VP vinyl chloride hose. Heat resistance of the standard union is 0 - 55˚C and that of the heat resistant union is 0 - 80˚C.
Connection
Thrust ring No mark: Hose type
Bearing M: G thread connection
Alumina ceramic
MD-55R-5M, MD-100R-5M
CFRPPS or PTFE
• Specify the pump model and power specification at an inquiry phase.
• GFRPP Glass fiber reinforced polypropylene
• CFRPPS Carbon fiber reinforced polyphenylene sulfide
• FKM Fluorine rubber
• EPDM Ethylene propylene rubber
9
IWAKI MAGNETIC DRIVE PUMPS MD
0
MD-70R
100 MD-100R
70 R Z
14
12
1 0 0R
-5
10
Head (m)
8
55R
-5
6 10
0R
4 70
R
55
R
2
0
10 20 30 40 50 60 70 80 90 100 110 120
Capacity (L/min)
Dimensions (mm)
( ): Thread connection type
61.5(60.8) 40 53 43 42 47.5
165
155
155
65
65
65
MD-100R(M)·100R-5(M)
Illustration shows MD-100R
64.8 43.5
175
75
70 110 4×[9×27]
100 146.8 156
321.8
10
IWAKI MAGNETIC DRIVE PUMPS MD
Special accessories
Specifications Specifications
Model 13A H13A 16A H16A 20A H20A Model SC-4V SC-4E SC-7V SC-7E
Material PVC HT-PVC PVC HT-PVC PVC HT-PVC Material of O ring FKM EPDM FKM EPDM
Range of temp. 0 - 55˚C 0 - 80˚C 0 - 55˚C 0 - 80˚C 0 - 55˚C 0 - 80˚C Connection G3/4 G1
Material of O ring FKM or EPDM Suction limit 0.8 m 1.2 m
Range of tank 0.8 L 1.3 L
Applicable pump MD-30RM-N, MD-40RM-N MD-70RM
Note: Self-priming height depends on liquid temperature and characteristics.
Our products and/or parts of products fall in the category of goods contained in control list of international regime for export control. The posting and copying from this catalogue
Legal attention related to export. Please be reminded that export license could be required when products are exported due to export control regulations of countries. without permission is not accepted firmly.