EMT- ELECTRICAL METALLIC TUBING
EMT is a steel raceway of circular cross section The interior is a smooth continuous raceway and
which is unthreaded. iscoated with zinc organiclubricants. Itisinstalled
The exterior is galvanized and protected by a_ either indoors or outdoors in all conditions and
clear zinc coating. produced trade size from %" to 4”.
EMT Pipes are manufactured in accordance with the latest edition of the following:
* American National Standard for Steel Electrical Metallic Tubing (ANSI C80.3)
* Underwriters Laboratories Standard for Electrical Metallic Tubing (UL 797). File No. 331698
Save with the length when purchasing the 6M EMT:
+ 6M (EMT) 20 feet
+ Fewer fittings
* Quick and Easy installation
* Listed to UL 797 Standard and ANSI C80.3
ELECTRICAL METALLIC TUBING — STEEL (WEIGHTS AND DIMENSIONS)
toe | Sees eee | nine
prea
mm ke.
¢-£00050 % 16 1.07 17.93 13.6
c-£00075 ce 24 1.24 23.42 20.9
¢-£00100 a 27 1.45 29.54 30.4
c£00125 | 1%" 35 1.65 38.35 45.8
c-£00150 | 1%” 41 1.65 44.20 52.6
¢-£00200 z 53 1.65 55.80 67.1
c-£00250 | 2%” 63 1.83 73.03 98.0
¢-£00300 a 78 1.83 88.90 119.3
c-£00350 | 3%” on 241 101.60 158.3
¢-£00400 ar 103 241 114.30 178.3
NOTES: Applicable tolerances Length: 10F. (3.05 m) 4M in (/- 6.35 mm)
(1)0urside Diameter: 2- 2¢/-10.015/in.(0.13-/+ 38-16 mm), 24/-10020- 2/1. -108+/-910.81 mm).
(0.015 +e 3 in (038 f+ 78 rm), 2-4 4f- 10.020. 3 in (103 +/-$10.51 mm)
coor svete I AFITTINGS FOR EM’
EMT Connectors and Couplings
Set Screw Type Connector - Zinc Die Cast
. Features Applications
= + Set screw type connector + Connectors; use to join EMT to box or enclosure
+ Conerete tight when taped + Couplings; use to join two lengths of EMT
+ Assembled witha die cast locknut Standard Material
+ Available with insulated throat + Zncdiecast
‘Dimensions in}
z 25 250 & 1339 0954 03s
z <0 2 1496 uaa osi2
= zs a 17 2555 siz
5 3 10 1968) are Osst
z = 2 10 2058 253 56
= 2 2 3307 355 988
2 10 a 34604460 1050
e = ® 5 300 ASS? 08?
® 6 a 30 _AS6T 06s
so 500 3 1s? 0728
3 250 25 imi os8s
200) 2 ee
es S zy urn
20 a sas
2 3 218
2 2 aa 3583
10 2 4504520a
EMT Straps
Snap-On Type - One Hole - Steel
GEsA075
SES 00
oasis,
SeS1150
(5.1250
es300
SEs350
csesaa00)
Snap-On Type - Two Hole - Steel
x
SES 2075,
Gsesans
wasn
SEs2200
es2250
(65.2300
ses2350
Ses2000)
FITTINGS FOR EMT
Features
‘+ Snap-on type EMT strap with one hole
+ Inverted rib for strength
Applications
‘= Suppart EMT conduit
Standard Material
= Steel
Standard Finish
+ Tine plated
Features
“= Snap-on type EMT strap with two holes
Applications |
+ Use to support EMT conduit where greater
load bearing s required
Standard Material
« Steel
Standard Finish
+ Zine platedELBOWS, COUPLINGS AND NIPPLES
EMT Elbows
90° - Galvanized Steel
L ®@
e915
e950
EMT Elbows
45° - Galvanized Steel
Laws
Features
* Low conducthity, high corrosion
resistance
‘= Smooth defect free interior and
exterior
Applications
‘For a secure connection to EMT
conduit; bend enables directional
changes in conduit
‘Standard Material
= Galvanized steel
Features
‘+ Low conductivity, high corrosion
resistance
“+ Smoath defect free interior and
exterior
‘Applications
«For a secure connection to EMT
conduit; bend enables directional
‘changes in conduit
‘Standard Material
«= Galvanized steel