Professional Documents
Culture Documents
TD31 Datasheet 12 4CC CW Protector Nose
TD31 Datasheet 12 4CC CW Protector Nose
TD31 Datasheet 12 4CC CW Protector Nose
: TD31-12 Revision : 01
Document Title : Utility Pigging Tools: Standard Multi Bolt
Cup Pigging Tools
Issue Date : 19/01/07
1 of 3
© Copyright Reserved Pipeline Engineering & Supply Co. Ltd 2007
Document No. : TD31-12 Revision : 01
Document Title : Utility Pigging Tools: Standard Multi Bolt
Cup Pigging Tools
Issue Date : 19/01/07
Overall Length
Sealing Length
Cup Ø
Table 1 Standard 4CC Pigging Tool c/w Protector Nose Dimensional Data
Note: Cup diameters and tool lengths are sized and toleranced in accordance with company guidelines
to suit specific pipeline geometry.
For sizes above 36”ns please contact the sales department for further information.
2 of 3
© Copyright Reserved Pipeline Engineering & Supply Co. Ltd 2007
Document No. : TD31-12 Revision : 01
Document Title : Utility Pigging Tools: Standard Multi Bolt
Cup Pigging Tools
Issue Date : 19/01/07
Construction /
Commissioning Phase : Cleaning / Filling / Dewatering
Note: The distances shown are approximate values only and should not be considered as absolutes.
Factors such as pipeline geometry and condition, pipeline medium, temperature, tool application
and configuration will all have an effect on the actual tool run distance.
Optional Ancillary Items : The tool can be fitted with optional ancillary items to suit specific
multi functional operational duties.
i.e. gauge plates, spring mounted brushes, bypass ports, etc.
Please note that not all options are available for all sizes.
Please contact the sales department for further information.
Return to Index
The information provided is given in good faith and is intended as a general guideline only.
We can assume no responsibility for its use as this is outside of the control of the company.
Please consult the Sales Department for project specific criteria.
3 of 3
© Copyright Reserved Pipeline Engineering & Supply Co. Ltd 2007