Professional Documents
Culture Documents
LEHM0004-00 Mesin Bantu
LEHM0004-00 Mesin Bantu
(1001&1135 bhp)
MARINE PROPULSION 747 & 847 bkW
SPECIFICATIONS
I-6, 4-Stroke-Cycle-Diesel
Emissions . . . . . . . . . . . . . . . . . . . . . . . . . EPA Tier 2, EU Stage IIIA
CCNR Stage II, IMO regulations
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.1 L (1106 in3)
Rated Engine Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2300
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 mm (5.7 in.)
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 mm (7.2 in.)
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged-Aftercooled
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic
Cooling System. . . . . . . . . . . . . . . . . . . . . . Heat-Exchanger Cooled
Weight, Net Dry (approx.) . . . . . . . . . . . . . . . . . . . 1860 kg (4102 lb)
Refill Capacity
Cooling System (engine and
Image may not reflect expansion tank) . . . . . . . . . . . . . . . . . . . . . . . . . 45 L (11.9 gal)
actual engine Lube Oil System . . . . . . . . . . . . . . . . . . . . . . . . . 49.2 L (13.0 gal)
Oil Change Interval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 hours
Rotation (from flywheel end) . . . . . . . . . . . . . . . . Counterclockwise
STANDARD EQUIPMENT
Air Inlet System Instrumentation
Corrosion-resistant sea water aftercooler, air cleaner/ fumes Instrument panel (24V): start/stop switch, emergency stop
disposal (closed system with service indicator), turbocharger air button, diagnostic light 15A and 3A breakers, start motor
cleaner/fumes disposal (closed system) magnetic switch
Control System Lube System
Electronic governing (A4 Electronic Control Unit), EUI fuel Crankcase breather, oil cooler, oil filter, spin-on, RH service on
system, cold mode start strategy, programmable low idle, port, LH service on starboard, center sump oil pan, oil filler,
electronic diagnostics and fault logging, engine and transmission dipstick, RH service on port, LH service on starboard, oil pump,
monitoring (speed temperature, pressure), fuel/air ratio control gear-driven
Cooling System Mounting System
Thermostat and housing, jacket water pump, gear-driven, sea Adjustable front support
water pump, rubber impeller, self-priming, heat exchanger —
titanium plate with integral expansion tank and thermostat Power Take-Offs
housing (fully open temp 92°C), integral fuel cooler, coolant Hydraulic pump drive, SAE A, 11 tooth spline, crankshaft pulley,
recovery system two groove
LEHM0004-00 Page 1 of 4
C18 ACERT® MARINE PROPULSION
1015 & 1150 mhp (1001 & 1135 bhp) 747 & 847 bkW
PERFORMANCE CURVES
Turbocharged-Aftercooled
E Rating — 1015 mhp (1001 bhp) 747 bkW @ 2300 rpm
EM0013-00
Engine Power
Engine Power
747 1002
508 682
kW
hp
270 362
31 42
4112 3033
Torque
Torque
2866 2114
N•m
lb-ft
1621 1195
375 277
250 .411
g/kW-hr
lb/hp-hr
237 .389
BSFC
BSFC
223 .367
210 .345
800 1000 1200 1400 1600 1800 2000 2200 2400 800 1000 1200 1400 1600 1800 2000 2200 2400
Engine Speed - rpm Engine Speed - rpm
Cubic prop demand curve with 3.0 exponent for displacement Power produced at the flywheel will be within standard
hulls only. tolerances up to 50°C (122°F) combustion air temperature
measured at the air cleaner inlet, and fuel temperature
up to 52°C (125°F) measured at the fuel filter base.
Power rated in accordance with NMMA procedure as
crankshaft power. Reduce crankshaft power by 3% for
propeller shaft power.
LEHM0004-00 Page 2 of 4
Marine Engine Performance
C18 DITA
847 kW (1136 hp) @ 2300 rpm
E-RATING - EM0012-03 EPA T2 CERTIFIED
Engine Power
Engine Power
847 1136
573 768
kW
hp
298 400
24 32
4082 3011
Torque
Torque
2830 2087
N•m
lb-ft
1578 1164
326 240
260 .427
g/kW-hr
lb/hp-hr
244 .400
BSFC
BSFC
227 .373
211 .346
800 1000 1200 1400 1600 1800 2000 2200 2400 800 1000 1200 1400 1600 1800 2000 2200 2400
Prop Prop
Demand 2300 847.0 3517 222.7 224.8 Demand 2300 1135.8 2594 .366 59.4
Data 2200 741.3 3217 221.9 196.0 Data 2200 994.1 2373 .365 51.8
2100 644.7 2932 226.2 173.9 2100 864.6 2162 .372 45.9
1900 477.5 2400 232.4 132.3 1900 640.3 1770 .382 34.9
1800 406.0 2154 223.9 108.4 1800 544.5 1589 .368 28.6
1600 285.1 1702 211.3 71.8 1600 382.3 1255 .347 19.0
1500 234.9 1496 212.6 59.5 1500 315.0 1103 .350 15.7
1200 120.3 957 220.0 31.5 1200 161.3 706 .362 8.3
1000 69.6 665 226.8 18.8 1000 93.3 490 .373 5.0
800 35.6 425 243.8 10.4 800 47.7 313 .401 2.7
700 23.9 326 259.9 7.4 700 32.1 240 .427 2.0
Cubic prop demand curve with 3.0 exponent for displacement Power produced at the flywheel will be within standard
hulls only. tolerances up to 50°C (122°F) combustion air temperature
measured at the air cleaner inlet, and fuel temperature
up to 52°C (125°F) measured at the fuel filter base.
Power rated in accordance with NMMA procedure as
crankshaft power. Reduce crankshaft power by 3% for
propeller shaft power.
LEHM0004-00
PD-EM0012-03.pdf Created on 03/24/2009 19:00 © 2009 Caterpillar All RightsPage 3 of 4
Reserved
C18 ACERT® MARINE PROPULSION
1015 & 1150 mhp (1001 & 1135 bhp) 747 & 847 bkW
ENGINE DIMENSIONS
1 2
Note: Do not use for installation design. See general dimension drawings for detail
(Drawing #2070024).
Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is only intended for purposes of
comparison with other manufacturers’ engines. Actual engine performance may vary according to the particular application of the engine and operating
conditions beyond Caterpillar’s control.
Power produced at the flywheel will be within standard tolerances up to 49°C (120°F) combustion air temperature measured at the air cleaner inlet, and fuel
temperature up to 52°C (125°F) measured at the fuel filter base. Power rated in accordance with NMMA procedure as crankshaft power. Reduce crankshaft
power by 3% for propeller shaft power.
CAT, CATERPILLAR, their respective logos, ACERT, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity
used herein, are trademarks of Caterpillar and may not be used without permission.