Professional Documents
Culture Documents
G6-U10V100R001C900B146CUSTC408D004 - NAF - Channel - Software Upgrade Guideline - +Ý+ + +ÂÍ©Á+-Ú
G6-U10V100R001C900B146CUSTC408D004 - NAF - Channel - Software Upgrade Guideline - +Ý+ + +ÂÍ©Á+-Ú
HUAWEI
G6-U10
V100R001C900B146CUSTC408D004
软件升级指导书
Software Upgrade Guideline
Contents
1 版本介绍VERSION INTRODUCTION..........................................................................................3
2 升级准备UPGRADE PREPARATION.........................................................................................5
3 升级介绍UPGRADE INTRODUCTION......................................................................................5
4 升级操作UPGRADE OPERATIONS............................................................................................5
5 升级验证UPGRADE VALIDATE.................................................................................................9
6 备注NOTES...................................................................................................................................10
G6-U10 V100R001C900B146CUSTC408D003
G6-U10
手机需用MicroSD卡升级。The G6-U10
\\blrnas02a-rd\IT_VMP_HTIPL_Leela_04F\BL21406072_G6-U10
V100R001C900B146CUSTC408D004\Test\2.TestDoc\3.TestReleaseDocs
文件名 哈希校验值
value(SHA-256)
软件包 \\blrnas02a-rd\IT_VMP_HTIPL_Leela_04F\BL21406072_G6-U10
Software package V100R001C900B146CUSTC408D004\Software\dload\UPDATE.APP
\\blrnas02a-rd\IT_VMP_HTIPL_Leela_04F\BL21406072_G6-U10
V100R001C900B146CUSTC408D004\Software\dload\
UPDATE_CUST.APP
软件:vendor包 \\blrnas02a-rd\IT_VMP_HTIPL_Leela_04F\BL21406072_G6-U10
service ignore vendor package NOTE: In recent versions, the UPDATE.APP file will be
and corresponding operations) available inside “dload” folder. Upgrade steps given in
Update tools
正常升级需启动手机并进入设置模块。强制升级常用于手机无法启动或无法进入待机
界面的场景。Normal upgrade needs to start the handset and enter the Setting module.
Force upgrade is often used when the handset can’t boot up or can’t enter the idle
screen.
optional).
Step 3. 将 1.3.4节描述的大包目录下整个dload目录(包含UPDATE.APP)拷贝到MicroSD
卡根目录。Copy the entire dload folder from Software Main Package file path(refer to
the MICRO SD card into the handset and power on. After entering the home screen,
stop, the phone will restart, if not you need to remove the battery manually.
Delete the existing dload folder on SD card and then copy the entire dload folder at
Software Vendor Package file path (refer to section 1.3.4) to the root directory of the
production】
>Reset phone]
optional).
Step 3. 将 1.3.4节描述的大包目录下整个dload目录(包含UPDATE.APP)拷贝到
MicroSD卡根目录。Copy the entire dload folder from Software Main Package file
Step 4. 在手机关机状态下,插入MicroSD卡,同时按住音量上键+音量下键+电源键,
MICRO SD card into the handset. Press the VOLUME UP and VOLUME DOWN
key, and then press the POWER key to power on the phone and enter the
progress bar stop, the phone will restart, if not , you need to remove the battery
manually.
Step 6. (产线请忽略此操作)删除SD卡上的dload目录,将1.3.4节中的vendor包的
production】 Delete the existing dload folder on SD card and then copy the
entire dload folder at Software Vendor Package file path (refer to section 1.3.4)
to the root directory of the MICRO SD card. Then Execute Step 4 – Step 5
repeatedly.
production】
>Reset phone]
Build number
G6-U10 V100R001C900B146CUSTC408D004
备注 NOTES:
如果生产线没有打背贴(定制国家名,运营商名没有写入)或 一线没有升
级vendor/country小包定制版本可能不生效
If the production line/frontline does not write Vendor package (customer country name and
Operator name) information to the device the customized information will not take effect.
开机能正常进入待机界面,能正常拨号正常发起呼叫挂断,能正常关机。Switch on
the handset, enter the idle screen, input a dial number and make a voice call, then long
6 备注 Notes
6.1 备注 1 Notes 1
power of the battery is enough to run the upgrade process. Maybe you can connect the
handset with the charger or the USB data cable to provide power.
6.2 备注 2 Notes 2
the user data, so if there is something very important, recommend you to backup them.