Electrical Inspection Checklist: Motors and Vehicles Run this Electrical Inspection Checklist: Motors and Vehicles when you perform your onsite inspection.
1. Intro to Motors and Vehicles: Yes No
2. Record inspection details
3. Run general inspection safety checklist 4. Check ampacities and sizing are based on tables not nameplates 5. Verify ampacities are +125% of table FLC 6. Check the conductors which supply multiple motors 7. Check the motor overload protection 8. Check the short-circuit and ground-fault protection 9. Verify there is proper overcurrent protection 10. Make sure the motor controllers are the proper type 11. Check MCCs for proper ratings 12. Check the motor disconnects 13. Inspect the controller disconnects 14. Inspect the motor disconnects 15. Write down overall notes regarding inspection 16. Send report via email to key stakeholders 17. Sources: 18. Related Checklists:
Remarks to each item If any:
Inspected by Electrician _______________ Date________________ Signature______________