Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

FLUID CAPACITIES 92

ITEM QUANTITY FLUID AND LUBRIFICANTS REFILL VISCOSITY GRADE


AKCELA

Liters BRAND (international classification)

Cooling system 65 (17.2) Premium Anti-Freeze MS 1710 Mixture of water and antifreeze at
50%. The mixture provides oxi-
dation, foaming, corrosion, scal- –
ing and freezing protection prop-
erties down to - 35 °C (- 31 °F).

Fuel tank 495 (130.8) – Diesel fuel ASTM No. 2-D type –
TT of good quality and brand

Engine 18 (4.8) AKCELA NO. 1 API CH-4 ACEA E5 SAE 15W-40


Engine oil* SAE 10W-30
Bevel-gear, 82 (21.7) AKCELA NO. 1 API CH-4 SAE 10W-30
Steering clutches Engine oil ACEA E5
brakes

Converter/transmission 67 (17.7) AKCELA CNH MAT3505 MS1209 SAE 10W


HY-TRAN®ULTRA
Equipment hydraulic 100 (26.4) AKCELA ISO VG-46 DIN 51524 GRADE NT
system Hydraulic Excavator PART 2 HVI
Fluid - MS 1230
Side final Drives (each) 43 (11.3) HYPOIDE 90 API GL5 SAE 80W-90
AKCELA GEAR 135 HEP MIL-L-2105D
Track idlers and rollers 9 (2.4) CASE NO. 1 API CH-4 SAE 10W-30
Engine oil ACEA E5
Grease fittings – CASE Molydisulfuide Grease – Grade 251 H - EP
Spec B-27

Cab tipping pump 0.5 (0.1) CNH MS 1209, Hy-Tran®Ultra ATF Type A SUFFIX A SAE 10W

Study SAFETY RULES in the front of this manual thoroughly for the protection of machine and safety of personnel
ALLISON C4
If the content of sulfur of the fuel exceeds 0.5%, change the engine oil as follows:
Notes: - In case of a lower classification of CH4 engine oil, the change must
be done every 250 hours.
2550

as 0.5% sulfur Normal Service interval


- The change interval must be reduced when present sulfur in the fuel
exceed to 0,5% or the ambient temperature exceed to 38 °C. 0.5 to 1% Half normal interval
up to 1% One quarter normal interval

You might also like