How to resolve the "finisher cannot be used" message
Resolution
1, Enable the folder unit by selecting: User interface |
Settings/Registration | Login
2. Select Management Settings | Device M: ent | Limited Function Mode.
= Finisher Tray ,
> Off
» Finisher Saddl
> Off
= Folding Unit
> Off
= Finisher Punck
> Off
3. Select Folder Unit.
4, Select OFF.
5. Select Reset,
6. Tum the main power switch (right hand side of the engine) OFF and ON.
Question: How to resolve the “finisher cannot be used” message
What does the message “fisher cannot be used” mean on the bottom of the displayProblem: The machine control panel displays the message: Finisher cannot be used at the bottom
ofthe screen.
The machine control panel displays Functions Limited next to "Ready to Copy"
Environment : Canon imageRUNNER ADVANCE C9065 PRO
‘Canon imageRUNNER ADVANCE C3075 PRO
Canon imageRUNNER 3525
‘Canon imageRUNNER 3235
‘Canon imageRUNNER 3245
‘Canon imageRUNNER ADVANCE C5030
‘Canon imageRUNNER ADVANCE C5035
‘Canon imageRUNNER ADVANCE C5045
‘Canon imageRUNNER ADVANCE C5051
‘Canon imageRUNNER ADVANCE C7055
‘Canon imageRUNNER ADVANCE C7065
‘Canon imageRUNNER ADVANCE 6055
‘Canon imageRUNNER ADVANGE 6065
Note: The system may have a hardware problem if an error message is displayed at the
machine panel after disabling Limited Function. Please contact the
Océ Service Department for further assistance
< »