Professional Documents
Culture Documents
BS en 22858-1993 (1999)
BS en 22858-1993 (1999)
22858:1993
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Apr 29 11:30:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
ISO 2858:1975
End-suction centrifugal
pumps (rating 16 bar) —
Designation, nominal
duty point and
dimensions
UDC 621.671
BS EN 22858:1993
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Apr 29 11:30:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
Cooperating organizations
Contents
Page
Cooperating organizations Inside front cover
National foreword ii
Foreword 2
Text of EN 22858 3
National annex NA (informative) Committees responsible Inside back cover
National annex NB (informative) Cross-references Inside back cover
© BSI 10-1999 i
BS EN 22858:1993
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Apr 29 11:30:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
National foreword
This British Standard has been prepared under the direction of the Machinery
and Components Standards Policy Committee and is the English language
version of EN 22858:1993 End-suction centrifugal pumps (rating 16 bar) —
Designation, nominal duty point and dimensions, published by the European
Committee for Standardization (CEN). It is identical with ISO 2858:1975,
published by the International Organization for Standardization (ISO).
EN 22858:1993 was produced as a result of international discussion in which the
UK took an active part.
A British Standard does not purport to include all the necessary provisions of a
contract. Users of British Standards are responsible for their correct application.
Compliance with a British Standard does not of itself confer immunity
from legal obligations.
Summary of pages
This document comprises a front cover, an inside front cover, pages i and ii,
the EN title page, pages 2 to 6, an inside back cover and a back cover.
This standard has been updated (see copyright date) and may have had
amendments incorporated. This will be indicated in the amendment table on the
inside front cover.
ii © BSI 10-1999
EUROPEAN STANDARD EN 22858
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Apr 29 11:30:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
NORME EUROPÉENNE
February 1993
EUROPÄISCHE NORM
UDC 621.671
English version
CEN
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
Central Secretariat: rue de Stassart 36, B-1050 Brussels
Foreword Contents
In 1991, the International Standard ISO 2858:1975 Page
(second edition) End-suction centrifugal pumps Foreword 2
(rating 16 bar) — Designation, nominal duty point
1 Scope and field of application 3
and dimensions was submitted to the CEN Primary
Questionnaire procedure. 2 References 3
Following the positive result of the CEN/CS 3 Designation 3
Proposal, ISO 2858:1975 (second edition) was 4 Nominal duty point and dimensions 3
submitted to the Formal Vote. 5 Static test pressure 3
The result of the Formal Vote was positive. Table — Nominal duty point and dimensions 5
This European Standard shall be given the status of
a national standard, either by publication of an
identical text or by endorsement, at the latest by
August 1993, and conflicting national standards
shall be withdrawn at the latest by August 1993.
According to the CEN/CENELEC Internal
Regulations, the following countries are bound to
implement this European Standard:
Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal,
Spain, Sweden, Switzerland and United Kingdom.
2 © BSI 10-1999
EN 22858:1993
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Apr 29 11:30:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
2 References
ISO/R 228, Pipe threads where pressure-tight joints are not made on the threads (1/8 inch to 6 inches).
ISO 496, Driving and driven machines — Shaft heights.
ISO/R 775, Cylindrical and 1/10 conical shaft ends.
ISO 3069, End-suction centrifugal pumps — Dimensions of cavities for mechanical seals and for soft
packing.
(Supplement to this International Standard.)
NOTE ISO 2084 can be used for the dimensions of flanges.
3 Designation
The pump designation comprises three numbers: the first corresponds to the inlet diameter, the second to
the outlet diameter and the third to the nominal diameter of the impeller.
Example of designation
A centrifugal pump with an inlet diameter of 80 mm, an outlet diameter of 50 mm and a nominal impeller
diameter of 250 mm is designated 80-50-250.
1)
The manufacturer shall be consulted about the temperature limitation.
2) 1 bar = 0,1 MPa.
© BSI 10-1999 3
EN 22858:1993
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Apr 29 11:30:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
4 © BSI 10-1999
EN 22858:1993
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Apr 29 11:30:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
125 80 160 8 32
180
225
65 125 95
320 250
M 12
optional
© BSI 10-1999 5
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Apr 29 11:30:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
6
blank
BS EN 22858:1993
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Apr 29 11:30:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
The following bodies were also represented in the drafting of the standard, through subcommittees and
panels:
© BSI 10-1999
BS EN
22858:1993
Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Apr 29 11:30:21 GMT+00:00 2007, Uncontrolled Copy, (c) BSI
Revisions
It is the constant aim of BSI to improve the quality of our products and services.
We would be grateful if anyone finding an inaccuracy or ambiguity while using
this British Standard would inform the Secretary of the technical committee
responsible, the identity of which can be found on the inside front cover.
Tel: 020 8996 9000. Fax: 020 8996 7400.
BSI offers members an individual updating service called PLUS which ensures
that subscribers automatically receive the latest editions of standards.
Buying standards
Orders for all BSI, international and foreign standards publications should be
addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001.
Information on standards
Copyright
Copyright subsists in all BSI publications. BSI also holds the copyright, in the
UK, of the publications of the international standardization bodies. Except as
permitted under the Copyright, Designs and Patents Act 1988 no extract may be
reproduced, stored in a retrieval system or transmitted in any form or by any
means – electronic, photocopying, recording or otherwise – without prior written
permission from BSI.
This does not preclude the free use, in the course of implementing the standard,
of necessary details such as symbols, and size, type or grade designations. If these
details are to be used for any other purpose than implementation then the prior
written permission of BSI must be obtained.