Professional Documents
Culture Documents
VINGTOR Talk Back Intercom Systems 21.05.2013
VINGTOR Talk Back Intercom Systems 21.05.2013
VINGTOR Talk Back Intercom Systems 21.05.2013
ex proof EQUIPMENT 17
amplifiers 18
talk-back systems
FEATURES approvals
TALK TALK
Central unit ETB-10 CALL
1 2 3 4 5 Parallel station
Parallel station 6 7 8 9 10 SB-4
SB-4
SB-4 SB-4
MICROPHONE MICROPHONE
P-66
VOLUME
CALL
P-66
CALL
_ +
CALL
CALL
ALL DIM SIGN TALK
VINGTOR ETB-10
VML-1520 VML-1520
24V DC OUT
24V DC EMERGENCY
Power failure
Indication
CALL
CALL
CALL
CALL
CALL
VML-1520
Substation STB-5GN
Line 8
STB-5GN
Substation VH-10M
Signal unit
Line 5
CALL
CALL TALK
CALL
VML-1520 CD-2
P-MT7 Substation STB-3
Line 9
STB-2
P-66 CALL
CALL
10m cable
STB-3
MICROPHONE
1 CALL
CALL
10m cable
Substation Line 10
EX loudspeaker EX push button box STB-2
CALL
CALL
Ui 690V IN 16A
TALK TALK
1 2 3 4 5
Parallel station 6 7 8 9
Parallel station
10
SB-4 SB-4
SB-4 SB-4
P-66
CALL
CALL
VINGTOR ETB-100
VML-1520 VML-1520
100V POWER AMPLIFIER Sub-station STB-1 Sub-station STB-1
Line 1 Line 2
STB-1 STB-1
ON
OFF
VPA-120
POWER AMPLIFIER
SPS-4
POWER SUPPLY
230/115V AC MAIN DC ok
24V DC OUT
24V DC EMERGENCY
Powerfailure CALL
Indication
CALL
CALL
CALL
100V Loudspeaker line
CALL
Line 5
VML-1520
VML-15T P-MT7 Substation STB-3
P-66 Line 9
STB-3
MICROPHONE 100V Loudspeaker line
1 CALL
Line 6
CALL
10m cable
Signal unit
Substation line 10
100V Loudspeaker line
100V Ex-loudspeaker Ex-push button box Line 7
Ui 690V IN 16A
central
master station with 5 lines selection
all call facility
master station with 10 lines selection
all call facility
Units
monitor-speaker / microphone
connector for gooseneck or handheld
microphone
monitor-speaker / microphone
connector for gooseneck or handheld
microphone
Dimmable memory light Dimmable memory light
line buttons with memory light line buttons with memory light
buzzer indication of incoming calls buzzer indication of incoming calls
step volume control step volume control
call signal call signal
output for extra signal device all lines output for extra signal device all lines
24 VDc power supply 24 VDc power supply
size (WxHxD): 240 x 144 x 130mm size (WxHxD): 240 x 144 x 130mm
Weight: 1.6 kg Weight: 1.6 kg
additional information: ip-22 additional information: ip-22
size (WxHxD): 240 x 144 x 130mm size (WxHxD): 240 x 144 x 130mm size (WxHxD): 240 x 144 x 130mm
Weight: 1.8 kg Weight: 1.6 kg Weight: 1.8 kg
additional information: ip-22 additional information: ip-22 additional information: ip-22
talk-back systems
The CTB & CTB-100 Talk-Back system is a com- The CU central unit contains all electronic parts
mand communication system based on one op- including the optional output amplifier, as well as
erator unit/panel and a wide range of substations terminals for termination of all field equipment.
for marine environments. The CTB-100 system
supports public address using power amplifiers The CTB operator panels have foil protected push
and 100V loudspeakers. The systems is typically buttons. The physical dimensions are based on
used to coordinate activities in a work group – the Euro DIN standard and are integrated seam-
the main stations can hear all conversations. lessly into bridge solutions. Both handheld and
The CTB & CTB-100 systems are based on one gooseneck microphones can be used via settings
central unit, up to 4 main operator panels (the in the CU central unit.
CTB-100 Talk-Back system includes loud-hailing
and 100 V power amplifier in addition) and a
wide range of substations made for marine
environments. Operator panels are nominated
as master or sub-master by settings in the CU
central unit.
FEATURES approvals
Operator station with Direct Access Keys The CTB systems are tested
10 or 20 lines direct selection according to IEC 60945, and is type
Work group communication facility approved by DNV, RMRS, CCS, RRR
Extension buttons with memory light and buzzer & PRS
indication of incoming calls
Easy access volume control for operators
Dimmable panel background light
Easy integration with SPA-V2 for audio output and zone
selection
Integrated bridge solution with DIN norm for mounting
HP-8 Operation panel CTB-20W/V01 Operation panel CTB-20 MB-30G ETC-1-TB Operation panel CTB-20W/V01 HP-8
Line 2 Line 1 Line 3
CTB-20
Signal unit CTB-20
P-66 CTB-20
1 2 3 4 5 P-66 1 2 3 4 5
1 2 3 4 5
Signal unit
Signal unit 6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
11 12 13 14 15
11 12 13 14 15 11 12 13 14 15
16 17 18 19 20
16 17 18 19 20 VOLUME
16 17 18 19 20
VOLUME VOLUME
- + ALL B AUX DIM SIGN TALK
Foot-switch
11 12 13 14 15
16 17 18 19 20
VOLUME
SPS-4
POWER SUPPLY
230/115V AC MAIN DC ok
24V DC OUT
24V DC EMERGENCY Sub-station STB-1 Sub-station STB-1
Line 8 Line 9
STB-1 STB-1
Powerfailure
Indication CALL TALK CALL TALK
CALL
CALL
CALL CALL
24V DC
Substation STB-5GN
Line 18
Substation STB-2 Substation STB-2 Substation STB-2
Line 12 Line 13 Line 14
STB-5GN
CALL
CALL
CALL
CALL
CALL
CALL
CALL TALK
CALL
VML-1520
P-MT7 Substation STB-3
P-66 Line 19
STB-3
MICROPHONE
1 CALL
CALL
10m cable
Substation VH-10M
Substation VHM-10M CD-2 Line 16
Line 15
Signal unit
VML-1520
24V DC CALL
STB-2
Substation line 20
CALL
CALL
CALL
CALL
10m cable
Ui 690V IN 16A
HP-8 Operation panel CTB-20W/V01 Operation panel CTB-20 MB-30G ETC-1-TB Operation panel CTB-20W/V01 HP-8
Line 2 Line 1 Line 3
CTB-20
Signal unit CTB-20
P-66 CTB-20
1 2 3 4 5 P-66 1 2 3 4 5
1 2 3 4 5
Signal unit
Signal unit 6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
11 12 13 14 15
11 12 13 14 15 11 12 13 14 15
16 17 18 19 20
16 17 18 19 20 VOLUME
16 17 18 19 20
VOLUME VOLUME
- + ALL B AUX DIM SIGN TALK
Foot-switch
1 2 3 4 5
VPA-120
POWER AMPLIFIER
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
VOLUME
VINGTOR
STB-6
CALL
STB-6 STB-6
CALL CALL
CALL
CALL
CALL
CALL CALL
VML-15
VML-15T VML-15T
Substation VH-10MT
Substation VHM-10MT CD-2 Line 13
Line 12
VML-15T CALL
STB-2
CALL
CALL
CALL
Signal unit 10m cable
STB-5
STB-5GN
Signal unit
CALL
CALL
CALL TALK
CALL
24V DC
VML-1520
P-MT7 Substation STB-3
P-66 Line 19
STB-3
MICROPHONE
1 CALL
100V Loudspeaker line
CALL
Line 15
10m cable
Signal unit
24V DC
Substation line 20
100V Ex-loudspeaker Ex-push button box
100V Loudspeaker line
Line 16
Ui 690V IN 16A
vingtor
vingtor
Size (WxHxD): 240 x 144 x 100 mm Size (WxHxD): 240 x 144 x 100 mm
Weight: 1.2 kg Weight: 1.2 kg
Additional Information: IP-22 Additional Information: IP-22
Size (WxHxD): 300 x 160 x 156 mm Size (WxHxD): 300 x 160 x 156 mm Size (WxHxD): 400 x 400 x 120 mm
Weight: 1.4 kg Weight: 1.4 kg Weight: 2.6 kg
Additional Information: IP-66 Additional Information: IP-66 Additional Information: IP-22
Size (WxHxD): 400 x 400 x 120 mm Weight: 2.6 kg Size (WxHxD): 400 x 400 x 120 mm Weight: 3.2 kg Size (WxHxD): 400 x 400 x 120 mm Weight: 3.2 kg
Additional Information: IP-22 Additional Information: IP-22 Additional Information: IP-22
102017420 0 3006090478
Size (WxHxD): 238 x 130 x 85mm Weight: 1.0 kg Size (WxHxD): 244 x 138 x 76 mm Weight: 1,0 kg
Additional Information: IP-22 Additional Information: IP-22
ACCESSORIES systems
Hang up clip
For ETB and CTB central panels
Size (Length): 460 mm Weight: 0.1 kg Size (WxHxD): 58 x 102 x 47mm Weight: 0.2 kg
Additional Information: IP-22 Additional Information: IP-22
3005020 0 3 9 3005020040
P-66 hand microphone with p-66/10 HAND MICROPHONE WITH
plug, wt PLUG AND 10M CABLE, WT
Weatherproof, salt water resistant handheld Weatherproof, salt water resistant handheld
microphone microphone
Suitable for heavy-duty Suitable for heavy-duty
outdoor operation subject to outdoor operation subject to
noise disturbance noise disturbance
Delivered with 2 meter Delivered with 10 meter cable
flexible cable and plug and plug
For use in Public Address For use in Public Address
System and Talk-Back System and Talk-Back
Size (WxHxD): 54 x 82 x 55mm Weight: 0.3 kg Size (WxHxD): 54 x 82 x 55mm Weight: 0.6 kg
Additional Information: IP-66 Additional Information: IP-66
Size (Length): 5m Weight: 0.3 kg Size (Length): 10m Weight: 0.5 kg Size PCB (WxHxD) : 50 x 35 x 16mm
Weight: 0.1 kg
Additional Information: IP-66 Additional Information: IP-66
Size (WxHxD): 240 x 144 x 100mm Weight: 0.4 kg Size (WxHxD): 40 x 130 x 125 mm Weight: 0.7 kg Size (WxHxD): 200 x 250 x 150 mm Weight: 4,1 kg
Additional Information: IP-22 Additional Information: Din rail mounting Additional Information: P-44
eQUIpmeNT
For microphone (p-66 or p-66/10) or
headset (p-mt7)
socket with dust cap
Wall mounting
size (WxHxD): 110 x 80 x 63 mm Weight: 0.3 kg size (WxHxD): 144 x 96 x 47 mm Weight: 0.1 kg
additional information: ip-66 additional information: ip-22
300502006 2 3005020063
sTb-6 flUsH mOUNTeD sUbsTaTION sTb-6GN flUsH mOUNTeD
fOR mIc sUbsTaTION W/GOOseNeck
substation for indoor use substation with gooseneck microphone for
parallel microphone / loudspeaker for etb and ctb indoor use
operator panels parallel microphone / loudspeaker for etb and
Wall mounting with back box ctb operator panels
socket for handheld microphone Flush or bulkhead mounting
etc-1-tb Wall mounting with back box
size (WxHxD): 144 x 96 x 44,5 mm Weight: 0.35 kg size (WxHxD): 144 x 96 x 44,5 mm Weight: 0.85 kg
additional information: ip-22 additional information: ip-22
300502005 7 3005020058
size (WxHxD): 144 x 96 x 49 mm Weight: 0.35 kg size (WxHxD): 110 x 80 x 63 mm Weight: 0.3 kg
additional information: ip-22 additional information:ip-66
300502005 9
sTb-3 cOmbINeD call-plUGbOx-sIGNal Relay (2a) UNIT WITHOUT
lOUDspeakeR
calling unit
Waterproof
call-button
socket with dust-cap for connection of headset
or microphone
built-in relay circuit for operation of external
signalling devices
Forming a loudspeaking talk-back substation together
with a horn loudspeaker
size (WxHxD): 224 x 80 x 63 mm Weight: 0.5 kg
additional information: ip-66
Weight: 1.2 kg Size (WxHxD): 58 x 102 x 47mm Weight: 0.2 kg Size (WxHxD): 60 x 220 x 80mm Weight: 0.3 kg
Additional Information: For STB-5 only.
Additional Information: IP-54
3006206006
he-112m OUTDOOR LOUDSPEAKER
WITH CALL BUTTON
Talk-Back Substation,
for use in open deck areas
Wall mounting
Call-button
Size (WxHxD): 144 x 144 x 57 mm Weight: 0.9 kg Size (WxHxD): 144 x 144 x 57 mm Weight: 0.5 kg Size (WxHxD): 122 x 120 x 90 mm Weight: 0.4 kg
Additional Information: IP-22 Additional Information: IP-22 Additional Information: IP-66
3006206 0 2 9 3006206007
u2410 FOOT SWITCH INDOOR USE he-112m-t LOUDSPEAKER, Wt,
100V
Foot switch for VOC, ETB and CTB systems
1-Pole switch 250 VAC 6A Talk-Back Substation, for use in open deck
areas
Wall mounting
Call-button
Size (WxHxD): 101 x 198 x 40 mm Weight: 0,2 kg Size (WxHxD): 122 x 120 x 90 mm Weight: 0.6 kg
Additional Information: IP-22 Additional Information: IP-66
talk-back substation, for use in open deck talk-back substation, for use in open deck
areas areas
call-button call-button
also for wall mounting also for wall mounting
plugbox cD-2 needed plugbox cD-2 needed
1020600992
IRR-3 Relay bOx 24V Dc OR 220V
ac - sIGNal UNIT WT
separate relay unit for operation of 24 VDc or
220 visible and/or audible signal units.
Wall mounting
size (WxHxD): 156 x 410 x 305 mm Weight: 3.7 kg size (WxHxD): 156 x 410 x 305 mm Weight: 3.7 kg size (WxHxD): 110 x 80 x 63 mm Weight: 0,35 kg
additional information: ip-66 additional information: ip-66 additional information: ip-66
3 0 0 6206034 3006100088
VHm-10 specIal Deck UNIT WITH HaNDmIc mOUNTeD IN WT cabINeT Vml-1520 HORN speakeR 15W/20
OHm WT
talk-back substation for use in open deck areas
Wall mounting General purpose 15 Watt 20 ohm horn
call-button loudspeaker
Handheld microphone For use in deck areas, engine room etc.
prepared for external loudspeaker to be used together with
acm or talk-back
stations
2,5 mtr. cable
size (WxHxD): 215 x 310 x 160 mm Weight: 2.5 kg size (WxHxD): 250 x 145 x 270 mm Weight: 1.35 kg
additional information: ip-66 additional information: ip-67
optional junction box Jb-15t
3 0 0 6206035 3006100090
VHm-10-T specIal Deck UNIT WITH HaNDmIc mOUNTeD IN WT cabINeT Vml-15T/f HORN lOUDspeakeR
talk-back substation for use in open deck areas 15W 100V W/fUse, 2 mTR.cable
Wall mounting
General purpose 15 Watt horn loudspeaker
call-button
For use in deck areas, engine room etc.
Handheld microphone p-66
With 100V line transformer
prepared for external loudspeaker
adjustable power
tapping
With Fuse
size (WxHxD): 215 x 310 x 160 mm Weight: 2.5 kg size (WxHxD): 250 x 145 x 298 mm Weight: 1.9 kg
additional information: ip-66 additional information: ip-67
optional junction box Jb-15t
2340020 0 1 0 2340020011
DSP-15EEXmN w/ SST bracket DSP-15EExmNT w/ SST bracket
EX speaker 20 ohm 15W w/ 2x EX speaker 15W w/ 2x glands
glands ATEX ATEX
Rated / max. power 25w / 25w With 100V line transformer
Material: antistatic PA / Black Rated / max. power 25w / 25w
Bracket and all outside Tappings; 1,5W-2,5W-5,0W-6,5W-15W-25W
nuts and screws Material: anitistatic PA / Black
in stainless steel Bracket and all outside nuts and
Zone 1 screws in stainless steel
Zone 1
Size (WxHxD): 170 x 144 x 207 mm Weight: 2 kg Size (WxHxD): 170 x 144 x 207 mm Weight: 2.2 kg
Additional Information: 09ATEX1322X Additional Information: 09ATEX1322X
IP Rating IP-67 IP Rating IP-67
300501023 7
Vpa-240 pOWeR amplIfIeR, 240W
power amplifier in a 19” rack cabinet
100 V and 8 ohm output
Dual inputs with priority switching
temperature controlled, forced back-to-front ventilation
115/230 Vac mains and 24 VDc battery backup
power consumption at 0db 24V Dc 15,4 a
power consumption at 0db 230V ac 3.1 a
pilot tone line monitoring
24 VDc / 800 ma power output for external equipment
chime signal with on/off switch
size (WxHxD): 482 x 133 x 420 mm Weight: 21.2 kg
additional information:
tested according to iec 60945, iacs e10, iec 60533
3006206019 300501023 9
Rs-3c Rack 3HU, TeRmINals Vpa-400 pOWeR amplIfIeR, 400W
f/230Vac/24VDc IN/OUT power amplifier in a 19” rack cabinet
19”, 3U cabinet prepared for amplifier 100 V and 8 ohm output
prepared with necessary terminals for Dual inputs with priority switching
signal in/out and power supply temperature controlled, forced back-to-front ventilation
115/230 Vac mains and 24 VDc battery backup
power consumption at 0db 24V Dc 28,0 a
power consumption at 0db 230V ac 5.4 a
pilot tone line monitoring
24 VDc / 800 ma power output for external equipment
chime signal with on/off switch
size (WxHxD): 520 x 450 x 180mm Weight: 6.0 kg size (WxHxD): 482 x 133 x 420 mm Weight: 24.2 kg
additional information: additional information:
tested according to iec 60945, iacs e10, iec 60533
exchangeless intercom
FEATURES
The Pro700 system is a cost effective and user-
friendly communication system for ships. The Max. capacity of 40 stations, recommended system
system does not use a central exchange. All sta- size is 20 stations
tions are individually programmable and powered Standard power supply, 24-27V DC, 4A
from a central power supply. The system supports No system exchange
upto 40 stations (16-20 recommended) and one Priorities
speech channel. The system provides an extensive Cabin stations with privacy and display
All Call and two Group Calls with auto answer-back
range of standard and optional features supporting
One program distribution channel
both low and handsfree loud-speaking conversa-
Simple installation, loop cabling
tions.The system has a wide range of robust and Hands-free conversation, semi duplex
weather resistant stations and signal units for all Remote control of external audible or visible signal
on-board environments. devices
CABLE SPECIFICATION Interface possibilities to Public Address and PABX
(only one preprogrammed number)
0.6 mm diameter Amplifier (10W) to be built into stations
120 nF/km (standard cable quality)
Max. cable run: 700m Note! Not according to IEC 60945
Max. distance from power supply: 500m
Ext. power
24VDC
size (WxHxD): 68 x 225 x 45 mm Weight: 0.3 kg size (WxHxD): 125 x 280 x 50mm Weight: 0.5 kg
additional information: ip-22 additional information: ip-22
3007600034 bF642 cord, 3007600034 kb-171 socket
size (WxHxD): 125 x 280 x 50 mm Weight: 0.9 kg size (WxHxD): 80 x 220 x 51 mm Weight: 0.4 kg size (WxHxD): 124 x 244 x 63 mm Weight: 0.8 kg
additional information: ip-65 (front access) additional information: ip-44 additional information: ip-64
size (WxHxD): 124 x 244 x 63 mm Weight: 1,45 kg size (WxHxD): 124 x 244 x 63 mm Weight: 0.8 kg
additional information: ip-65 additional information: ip-65
1020159000 cD-4 plug box
3007600 0 2 9 3007600020
3007600 0 1 7 3007600034
bf636 fRONT plaTe fOR flUsH kb-171 sOckeT, 8 pIN mODUlaR
mOUNTING Jack, sURface mOUNT
swap on abs plastic connection box with 8 pin rJ45
size (WxHxD): 140 x 280 x 4.5 mm Weight: 0.1 kg size (WxHxD): 51 x 51 x 22.5 mm Weight: 0.040 kg
additional information: For aa702 additional information: For desk/wall station
Size (WxHxD): 80 x 240 x 63 mm Size (WxHxD): 80 x 280 x 125 mm Weight: 0.65 kg Size (WxHxD): 80 x 110 x 63 mm Weight: 0,35 kg
Weight: 0.9 kg
Additional Information: IP-44 Additional Information: IP-66
Additional Information: IP-44
Size (WxHxD): 80 x 110 x 63 mm Size (WxHxD): 86 x 50 x 130mm Size (WxHxD): 95 x 28 x 89 mm Weight: 0.1 kg
Weight: 0,35 kg Weight: 0.47 kg
Additional Information: For stations AA703V/P, BC735
Additional Information: IP-66 Additional Information:
3 0 0 6206010 3006100088
mp-8861 CONVERTER 24/24V DC - 3A VML-1520 Horn speaker 15W/20
Switch mode DC/DC converter
OHM WT
Protected against reversed polarity and over voltage (input) General purpose 15 Watt 20 ohm horn
Thermal protection, short circuit proof and over voltage protection (output) loudspeaker
Input and output are electrically separated from chassis. The input is For use in deck areas, engine room etc.
electrically separated from the output To be used together
6.3 mm push-on terminals (input and output) with ACM or talk-back
stations
Size (WxHxD): 119 x 135 x 46 mm Size (WxHxD): 250 x 145 x 270 mm Weight: 1.35 kg
Weight: 0.6 kg
Additional Information: IP-67
Additional Information: Additional Information: Needed when connected to ship's 24V DC Optional junction box JB-15T
intercom
microphone station
the sp-5 common line intercom 100V balanced output.
system provides all-to-all 24V Dc power supply
3006100 0 9 0 3006206019
Vml-15T/f HORN lOUDspeakeR Rs-3c Rack 3HU, TeRmINals
15W 100V W/fUse, 2 mTR.cable f/230Vac/24VDc IN/OUT
General purpose 15 Watt horn loudspeaker 19”, 3U cabinet prepared for amplifier
For use in deck areas, engine room etc. prepared with necessary terminals for
With 100V line transformer signal in/out and power supply
adjustable power
tapping
With Fuse
size (WxHxD):224 x 124 x 63 mm Weight: 0.9 kg size (WxHxD): 250 x 145 x 298 mm Weight: 1.9 kg size (WxHxD): 520 x 450 x 180mm
Weight: 6.0 kg
additional information: ip-65 additional information: ip-67
optional junction box Jb-15t additional information: see page 18 for amplifiers Vpa-120,
Vpa-240 and Vpa-400
DOC NO
A100K11296 21.05.2013
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. STENTOFON and VINGTOR products are developed and marketed by Zenitel. The company’s Quality Assurance
System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice. ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information
which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with Zenitel. Any authorized reproduction, in part or in whole, must include this legend. Zenitel – All rights reserved.