Professional Documents
Culture Documents
2 Seat
2 Seat
7410-01/7410-01/7430-01
SEAT
SEAT 7410-01
1. COMPOSITION OF SEAT
1) Front Seat
(1) Driver Seat
Reclining Motor
Lumbar
Support Lever
Seat cushion
(rear area) up/
down bar
Sliding rail
Sliding rail
Seat cushion
(front area) up/
down bar
Seat Cushion (Rear Area) Sliding motor Seat Cushion (Front Area)
Up/Down Motor Up/Down Motor
SEAT
ACTYON 2008.07
03-4 7410-01
Reclining Motor
Reclining Switch
Sliding lever
(No seat height control function)
Sliding motor
SEAT
ACTYON 2008.07
0000-00 03-5
2. FUNCTIONS OF SEAT
1) Switches and Functions of Driver Seat
1. Seat Sliding Adjustment
When sliding the switch
forward or rearward, the seat
slides forward or rearward by
the sliding motor.
4. Seatback Reclining
Adjustment
When moving the upper side
of the reclining switch forward
or
rearward, the seatback moves
forward or rearward by the
motor.
* Driver and passenger seats
SEAT
ACTYON 2008.07
03-6 7410-01
2) Rear Seat
Headrest Height Adjustment
Seatback Seatback
Reclining Lever Reclining Lever
SEAT
ACTYON 2008.07
0000-00 03-7
Seat belt
anchor
Pre-tensioner
Seat belt
anchor
Seat Belt
2-point type
seat belt Buckle of 2-point
3-point type type seat belt
seat belt
SEAT
ACTYON 2008.07
03-8 7410-01
1) Front Seat
1. Driver seat mounting point
SEAT
ACTYON 2008.07
7410-01 03-9
2) Rear Seat
Seatback (Rear No.2) Seatback (Rear No.1), Rear side
SEAT
ACTYON 2008.07
03-10 7410-01
1. Move the seat rearward as far as 2. Move the seat forward as far as
possible. Remove the bolt cap and possible. Remove the bolt cap and
unscrew the mounting bolts at both unscrew the mounting bolts at both
sides. sides.
Mounting
Bolt Cap
Bolt
Mounting
Bolt Cap
Bolt
SEAT
ACTYON 2008.07
7410-01 03-11
3. Lay down the seatback and disconnect the connector under the seat and then remove the
seat assembly.
Driver Seat
Mounting Piece
Connector
Passenger Seat
Connector
When installing, make sure to follow the specified torque and fit it into the mounting hole.
SEAT
ACTYON 2008.07
03-12 7410-01
2) Rear Seat
1. Slide the front seats forward and remove the seat mounting bolt caps and two mounting nuts.
Mounting Bolt
2. Unscrew the seat mounting bolts and remove the seat cushion while sliding it toward the
seatback. At this moment, the seat cushion should be out of the mounting holes.
Seat Mounting
Hole
Mounting
Hook
Mounting
Hole
SEAT
ACTYON 2008.07
7410-01 03-13
3. Remove the seat mounting bolts of the rear left seatback and the seatbelt mounting bolt with
the rear seat cushion removed. Then, remove the rear left seatback.
Front Mounting Bolt
Seatbelt
Mounting Bolt
Seat Mounting
Bolt
4. Remove the rear right seatback mounting bolts with the rear seat cushion removed and
remove the seatback.
SEAT
ACTYON 2008.07
03-14 7410-01
Install the rear seat in the reverse order or removal. Also, make sure to fit the seat into the
mounting holes and tighten the mounting bolts with the specified tightening torque.
Rear Seat
SEAT
ACTYON 2008.07
7430-01 03-15
Passenger
Seat Belt
SEAT
ACTYON 2008.07
03-16 7430-01
Mounting bolt of
2-point type rear
seat belt and buckle:
35 ~ 55 Nm
SEAT
ACTYON 2008.07
7430-01 03-17
SEAT
ACTYON 2008.07
03-18 7430-01
Mounting
Anchor Bolt
Mounting Screw
SEAT
ACTYON 2008.07
7430-01 03-19
Seat belt
Height adjuster
D-ring
SEAT
ACTYON 2008.07
03-20 7430-01
Anchor
bolt
3. Unscrew the lower anchor bolt of the rear
seat belt.
D-ring
SEAT
ACTYON 2008.07