Professional Documents
Culture Documents
Dokument Braided Packings
Dokument Braided Packings
2 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
Main Page or SubjectContents
Heading
3
To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz 3
Quick reference chart
l Certified to TA Luft for VOC fugitive emission control in valves l Other recommended VOC fugitive emission control products
SERVICE CAPABILITIES
Recommended Product name More Rotary Valve Reciprocating Static Temperatures
(Lids Doors) pH
service type details
on page Shaft speed Pressure Pressure Rod speed Pressure Pressure range
MIN (°F) MAX (°F)
(fpm) (psi) (psi) (fpm) (psi) (psi)
Rotary/Valve/ Aluflon 17 2362 290 1450 394 725 n/a –58 +266 0-14
Reciprocating Arasele 13 3937 363 2175 295 1450 n/a –58 +545 0-13
Duramid® 14 3937 363 2175 295 2175 n/a –58 +482 2-13
Fluograf® 12 4331 145 1160 197 1160 n/a –148 +500 0-14
Fluolion® Emulsion XA-P 17 3937 363 1450 197 1450 n/a –58 +518 1-14
Fluolion® Emulsion 2XA 19 2362 363 2175 394 1450 n/a –58 +554 2-12
Fluolion® Filament L 16 1969 363 2175 197 1450 n/a –148 +482 0-14
Fluolion SEQUEL® 13 3937 290 1450 394 1450 n/a –148 +536 1-14
Fluolion® Sturntite 24 1772 363 1450 197 1450 n/a –40 +203 5-10
Graphite Filament Packing 11 3937 363 2175 787 725 n/a –58 +752 0-14
Hornet 14 3937 290 3626 394 1450 n/a –58 +500 2-13
Liongraf 15 3445 290 1740 394 1160 n/a –148 +500 0-14
Ramiex 23 3445 290 3626 394 3626 n/a –22 +248 4-11
Rapido 25 1476 363 1450 197 1450 n/a –40 +203 6-10
Supeta XA 20 1969 145 1015 197 1015 n/a –40 +662 4-10
Rotary/Valve Aquagraf 15 3937 145 725 n/a n/a n/a –58 +500 1-13
Fortuna XA 20 3937 218 290 n/a n/a n/a –40 +599 4-10
Supagraf® Moulded Rings (steam) 10 C C 3626 n/a n/a n/a n/a +1202 0-14
Supagraf® RibbonPak (steam) 9 4922 363 3626 n/a n/a n/a n/a +1022 0-14
Supagraf® RibbonPak SC (steam) 10 3937 363 3626 n/a n/a n/a n/a +1202 0-14
Rotary Cottonpak Type E 23 1378 145 725 197 725 n/a –40 +194 6-8
Injectable Black 29 1181 116 n/a n/a n/a n/a +14 +302 4-10
Injectable White 29 1969 232 n/a n/a n/a n/a –148 +482 0-14
Injectable Yellow 29 1673 218 n/a n/a n/a n/a –58 +482 2-13
Rover Medium Soft Cotton 25 1378 145 725 197 725 n/a –40 +194 6-8
Valve/Reciprocating Fluolion® Filament D 16 787 145 3626 98 725 n/a –148 +482 0-14
Glengarry 25 787 145 1450 197 1450 n/a –40 +203 6-10
Sextant 24 591 145 1450 197 1450 n/a –40 +194 6-10
Valve Fluocord 29 n/a n/a 508 n/a n/a n/a –238 +482 0-14
Grafpak 11 n/a n/a 2175 n/a n/a n/a –58 +1022 0-14
Incoval XA 19 n/a n/a 2175 n/a n/a n/a –40 +932 2-11
Supagraf® Control l 7 n/a n/a 3626 n/a n/a n/a –328 +662 1-14
Supagraf® LF Rings l 8 n/a n/a 3626 n/a n/a n/a –328 +662 0-14
Supagraf® Premier l 6 n/a n/a 3626 n/a n/a n/a –328 +842 1-14
Supagraf® PremiPak l 28 n/a n/a 3626 n/a n/a n/a –328 +842 1-14
Supagraf® RibbonPak M (steam) 9 n/a n/a 4351 n/a n/a n/a n/a +1202 0-14
Supagraf® Tape 30 n/a n/a 1015 n/a n/a n/a –328 +932 0-14
Valcor® XA 21 n/a n/a 2175 n/a n/a n/a –58 +932 2-13
Valvemaster® Packing Sets 28 n/a n/a 3626 n/a n/a n/a –328 +1022 0-14
Static Armoured Supasca XA 21 197 14.5 n/a n/a n/a 72.5 +14 +1256 4-10
(Lids/Doors) Tankatite® 250 27 n/a n/a n/a n/a n/a 7.3 –22 +212 1-13
Tankatite® 440 26 n/a n/a n/a n/a n/a 10.2 –58 +248 0-14
Tankatite® 660 26 n/a n/a n/a n/a n/a 8.7 –58 +446 0-14
Tankatite® 880 Super 27 n/a n/a n/a n/a n/a 29 –58 +248 0-14
Torrlid 162B 22 n/a n/a n/a n/a n/a Vacuum C C C
Torrlid 297 22 n/a n/a n/a n/a n/a Vacuum C C C
Valcor® Hi-Temp 18 n/a n/a n/a n/a n/a n/a –58 +1832 0-10
4 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
Quick reference chart
Key: 3= suitable product 7 = not suitable C = consult James Walker n/a = not applicable
MEDIA GUIDE INDUSTRY SECTORS
Process Potable Strong Caustic Marine Power Water &
Steam Gases Oils Solvents Chemical Food Metallurgical Petroleum Pulp & paper
water water acids alkalis services generation sewage
7 3 3 7 3 3 3 7 3 7 3 3 7 3 3 3
3 3 3 7 7 7 3 3 3 7 3 3 3 3 3 3
3 3 3 3 7 7 3 3 3 3 3 3 3 3 3 3
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
7 3 3 7 3 3 3 7 3 7 3 3 3 3 3 3
3 3 3 7 3 7 3 3 3 7 3 3 3 3 3 3
7 3 3 7 3 3 3 3 3 3 3 7 3 3 3 3
3 3 3 7 3 3 3 3 3 3 7 7 7 3 7 7
7 7 3 7 7 7 3 7 7 7 3 7 7 7 7 3
3 3 3 7 7 3 3 3 3 7 3 3 3 3 3 7
3 3 3 3 7 7 3 3 3 3 3 3 3 3 3 3
3 3 3 7 3 3 3 3 3 3 3 3 3 3 3 3
7 3 3 7 7 7 3 7 3 7 3 3 3 3 3 3
7 7 3 7 7 7 7 7 7 7 3 3 7 7 3 3
3 3 3 7 7 7 3 7 3 7 3 3 3 7 3 3
7 3 3 3 3 3 7 7 3 3 3 7 7 7 7 3
3 3 3 7 7 7 3 7 3 7 3 3 3 3 3 3
3 7 3 3 3 3 3 3 3 3 3 3 3 3 3 3
3 3 3 7 3 3 3 3 3 7 3 3 3 3 3 7
3 3 3 7 3 3 3 3 3 7 3 3 3 3 3 3
7 7 3 7 7 7 3 7 7 7 3 7 7 7 7 3
7 3 3 7 7 7 7 7 7 7 3 7 7 7 3 7
3 3 3 7 3 3 3 3 3 3 3 3 3 3 3 3
7 3 3 7 7 7 7 3 3 3 3 3 3 3 3 3
7 7 3 7 7 7 3 7 7 7 3 7 7 7 7 3
3 3 3 3 3 3 3 3 3 3 7 7 3 3 3 3
7 7 3 7 7 7 3 7 7 7 3 7 7 7 7 3
7 7 3 7 7 7 3 7 7 7 3 7 7 7 7 3
3 3 3 7 3 3 3 3 3 3 3 3 3 3 3 3
3 3 3 7 3 3 3 3 3 7 3 3 3 3 3 7
7 3 3 7 7 7 3 3 3 7 3 3 3 7 3 7
7 3 7 7 7 7 3 3 3 7 3 3 3 7 3 7
3 3 3 7 3 3 3 3 3 7 3 3 3 3 3 7
7 3 7 7 7 7 3 3 3 7 3 3 3 7 3 7
7 3 7 7 7 7 3 3 3 7 3 3 3 7 3 7
3 3 3 7 3 3 3 3 3 7 3 3 3 3 3 7
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
3 3 3 7 7 7 3 3 3 7 3 3 3 3 3 7
3 3 3 7 3 3 3 3 3 7 3 3 3 3 3 7
3 3 7 7 7 7 7 7 3 7 7 3 3 7 3 7
7 7 3 7 3 3 3 3 3 3 3 7 3 7 7 7
7 3 3 7 3 3 3 3 3 3 3 7 3 7 7 7
7 7 3 7 3 3 3 3 3 3 3 7 3 7 7 7
7 3 3 7 3 3 3 3 3 3 3 7 3 7 7 7
7 3 7 7 7 7 3 7 3 7 7 3 7 3 3 7
7 3 7 7 7 7 3 7 3 7 7 3 7 3 3 7
7 3 3 7 3 7 3 3 3 7 3 3 3 3 3 3
5
To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz 5
Main Page or Subject
Graphite-based fugitive
Heading
emission control
Supagraf® Premier
World-beating fugitive emission control Typical applications Prime features
Harsh operating conditions where l Third-party verified emission control
fugitive emissions from all types of performance.
valves need to be reduced to well l Came top of its class in independent
stern ppm
100
100
ppm Methane
ppm Helium
10
10
1
1 0 2000 4000 6000 8000 10000 12000
0 2000 4000 6000 8000 10000 12000
No. of Cycles No. of Cycles
6 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
Graphite-based
Main Page
fugitive
or Subject
emissionHeading
control
Supagraf® Control
Fugitive emission control for control valves Specifications Summaries of additional tests
to TA Luft requirements TA Luft/VDI 2440: Masoneilan In addition to TA Luft and ISO 15848-1
control valves fitted with Supagraf certifications shown under Specifications,
Control are certified to TA Luft the following impressive test results have
requirements at leak tightness with been achieved.
helium to <10-4mbar.litre.s-1.m-1.
The tests were undertaken with Thermal cycling: 10,800 valve operating
1450psi at 68°F and 827psi at a cycles at +68°F and 725psi, followed by
fluid flow temperature of 797°F for 16,700 operating cycles at 536°F and
100,000 stem cycles, including 725psi. Recorded leakage was
four thermal cycles and two gland <2.2 x 10-4 mbar.litre.s-1. (Third party test by
adjustments. major manufacturer of control valves.)
It can be used as a long-term replacement Ex-stock: all popular sections from ⁄÷•"
for the PTFE V-type packings that are upwards to suit standard valves. Non-
readily damaged by ingress of dirt and standard square or rectangular sections
other foreign particles to the gland area. made to order. Full fitting instructions are
included.
7
To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz 7
Graphite-based fugitive emission control
Supagraf® LF Rings
Low friction rings for low-torque valve special low friction coating has been sinter l Retain exceptionally low-friction
action plus fugitive emission control bonded. The 200µin (5µm) thick coating characteristics with fugitive emission
is bonded to the expanded control for up to 20,000 valve cycles.
graphite before the molding l Subsequent manual adjustment extends
process to ensure maximum performance to 60,000
service life. cycles.
l Fire-safe capability enables rings to be
Typical applications used in plant subjected to fire rating tests.
l Valves where fugitive emission l Can be supplied live-loaded.
control to 50ppm or less is
required. Chemical compatibility
l Valves that handle dry gases Chemically inert to most media in the
or other fluids, where friction range pH 0-14.
on standard graphite seals
is unacceptably high. Service capabilities
l Valves that suffer judder,
hesitation or erratic action due Valve stem duties
to carbon pick-up or high-spot
Maximum temperature +662°F (+350°C)
friction on the spindle.
Minimum temperature -328°F (–200°C)
Max service pressure 3626psi (25MPa)
Description
Supagraf® LF rings represent a major Prime features
l Greatly reduce the torque needed for
enhancement of the operational How supplied
efficient valve operation.
capabilities of graphite sealing rings used Precision moulded rings in endless form or
l Save on power consumption and
on valve stems. with single split or as matched scarf-split
enables smaller actuators to be
halves. Sections ⁄÷¡§" to 1·÷¡§" ; diameters
used.
The rings are precision molded from high ‹÷#™" ID to over 43" ID.
l Lower the break-out friction for smoother
purity expanded graphite foil to which a
valve operation.
Laboratory tests (*Surface characteristics improve on For standard graphite rings, the torque
Independent tests confirm our low-friction, these graphite rings as the material rose from 21Nm to 25Nm during the first
low torque claims. compresses.) 300 operating cycles.
In comparative tests, sets of Supagraf Torque figures taken during extended With a lubricated valve stem, the torque
LF Rings were compressed in a gland valve cycling tests showed that valve for standard graphite rings increase from
housing and the friction coefficients stem torque remained constant at 5Nm 7Nm to 23Nm during the first 150 cycles as
determined at two levels of for Supagraf LF Rings (see graph). the lubricant was removed by valve action.
compressive stress. The tests were VALVE STEM TORQUE
repeated with sets of standard graphite 30
rings.
Standard graphite rings
25
standard graphite.
15
Friction
10
Supagraf LF Rings coefficient
Supagraf LF
@ 10MPa stress 0.11 5
@ 40MPa stress 0.07*
Standard graphite rings 0
1 25 50 75 100 125 150 175 200 225 250 275 300
@ 10MPa stress 0.22
Number of cycles
@ 40MPa stress 0.14*
8 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
Graphite-based
Supagraf® RibbonPak M
Length-form graphite packing with Prime features Service capabilities
reinforcement l Exceptional temperature range.
l Excellent chemical resistance. Valve stem duties
l Long service life with rotary or rising-
stem valves. Maximum temperatures
l Low friction and high thermal
Steam +1202°F (+650°C)
Oxidising conditions +842°F (+450°C)
conductivity.
Non-oxidising +1832°F (+1000°C)
l Easy to cut, shape and install.
Minimum temperature –328°F(–200°C)
l Replaces molded graphite foil rings and
Max system pressure 4350psi (30MPa)
reduces stockholding.
l Extended shelf life – does not
harden. How supplied
Ex-stock: all popular square sections from
Chemical properties ⁄÷•" upwards to suit all standard valves. In
Description Chemically inert within the range pH boxes containing 26 ⁄÷¢' (8m), or supplied
Plaited length-form packing of pure 0-14, excluding strong oxidising agents. as split preformed rings and sets. Full
exfoliated graphite ribbons that are Negligible volatile content. Low in fitting instructions are included.
reinforced with fine Inconel® wires to extractable trace impurities such as
provide additional strength plus resistance chloride and sulphur.
to pressure and extrusion.
Typical applications
Valves handling steam, condensate, fuel,
oils, gases, chemicals, process water or
effluent. This product is widely used in
petrochemical plants, refineries, power
stations and steel mills.
Supagraf® RibbonPak
High rotary speeds with aggressive media Prime features Service capabilities
l Excellent chemical resistance across
very wide temperature range. Valve stem duties
l Replaces molded graphite foil sealing
Maximum temperatures
rings. Steam +1022°F (+550°C)
l Flexible and compressible.
Oxidising conditions +842°F (+450°C)
l Easy to install – no special tools needed.
Non-oxidising +1562°F (+850°C)
l Reduces stockholding requirements. Minimum temperature -328°F (–200°C)
Max system pressure 3626psi (25MPa)
Chemical properties
Chemically inert within the range pH
0-14, excluding strong oxidising agents. Centrifugal pumps &
Negligible volatile content. Low in rotary equipment
Description extractable trace impurities such as
High purity exfoliated graphite ribbons, Operating temperatures As valve stem
chloride and sulphur. Maximum shaft speed 4922fpm (25m/s)
plaited into a flexible length-form packing
Max system pressure 363psi (2.5MPa)
for convenient on-site maintenance.
9
To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz 9
Graphite-based
Supagraf® RibbonPak SC
Expanded graphite plus carbon fiber water or effluent. High speed rotary Service capabilities
pumps handling slurries, process water, or
chemical solutions. Valve stem duties
Maximum temperatures
Prime features Steam +1202°F (+650°C)
l Length-form packing that reduces
Oxidising conditions +842°F (+450°C)
stockholding and operating costs at Non-oxidising +1562°F (+850°C)
power stations, processing plants and Minimum temperature -328°F (–200°C)
many other industrial sites. Max system pressure 3626psi (25MPa)
l Low friction; high thermal conductivity.
l Conforms to housing irregularities.
l Densifies under compression for high Centrifugal pumps &
integrity sealing at high pressures. rotary equipment
Description l Replaces other graphite foil packings. Operating temperatures As valve stem
Superior quality packing of high purity l Extended shelf life — does not harden. Maximum shaft speed 3937fpm (20m/s)
expanded graphite ribbons reinforced with Max system pressure 363psi (2.5MPa)
carbon fiber for additional strength plus Chemical properties
resistance to pressure and extrusion. Chemically inert within the range pH How supplied
0-14, excluding strong oxidising agents. In all popular sections from ⁄÷•" to 1˝,
Typical applications Negligible volatile content. Low in in boxes containing 26 ⁄÷¢' (8m). Also as
Valves handling high temperature steam, extractable trace impurities such as molded rings, split preformed rings and
condensate, fuel oils, chemicals, process chloride and sulphur. sets. Full fitting instructions are included.
10 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
Graphite-based
Grafpak
For high temperature/pressure steam Typical applications Service capabilities
Control valves and main stop valves on
high temperature/pressure steam circuits at Valve stem duties
power stations, chemical plants, industrial
services, and on marine installations. Also Maximum temperatures
Steam & oxidising
suitable for duties with water, condensate,
conditions +1022°F (+550°C)
alkalis, acids, solvents and most
Non-oxidising (significantly higher,
chemicals. refer to James Walker)
Minimum temperature -58°F (–50°C)
Frequently used as end rings in Max system pressure 2175psi (15MPa) typical
conjunction with Supagraf® Molded Rings (refer to James Walker
(page 10) and in Valvemaster® live-loaded for higher pressures)
control system (page 28).
Description
Dense, high strength packing of cross- How supplied
Prime features
plaited premier quality graphite filament l Suitable for wide range of aggressive
Ex-stock: all popular square sections
yarns. Treated with pure graphite before from ⁄÷•" cross-section upwards to
media.
and after plaiting, and further treated with l Low friction for low torque operation.
suit all standard valves. In boxes containing
special corrosion inhibitors. l Tough and resistant to fretting and
26 ⁄÷¢' (8m), or supplied as split preformed
rings and sets. Full fitting instructions are
extrusion.
included.
Chemical properties
Chemically inert within the range pH 0-14,
excluding strong oxidising agents.
Fluograf®
Outstanding pump & valve packing Typical applications Service capabilities
Pumps and valves handling
aggressive chemical media in the Valve stem duties
petrochemical, pulp and paper, power
Maximum temperature +500°F (+260°C)
generation and metallurgical sectors,
as well as potable water, food Minimum temperature -148°F (–100°C)
products, and steam at up to 500°F. Max system pressure 1160psi (8MPa)
GFO® is a homogenous fiber, developed specifically for braided packings with heat transfer and lubricant components forming
an integral part of the yarn. In contrast, most other packing yarns have these components added as a coating during packing
manufacture. Such coatings may be washed out during the service life of the packing.
12 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
PTFE-based
Fluolion SEQUEL®
Pure white for food & pharmaceuticals Typical applications Service capabilities
Rotary and reciprocating plant in the food
processing, pharmaceutical, speciality Valve stem duties
chemicals, and pulp and paper sectors.
It is particularly recommended for sugar Maximum temperature +536°F (+280°C)
and chocolate processing, and fine paper Minimum temperature -148°F (–100°C)
production. Max system pressure 1450psi (10MPa)
Duramid®
Tough packing for harsh conditions Typical applications Service capabilities
Valves and pumps handling abrasive and
aggressive media in pulp and paper mills, Valve stem duties
petrochemical plants, power stations, Maximum temperature +482°F (+250°C)
metallurgical plants, sewage works and Minimum temperature -58°F (–50°C)
china clay works. Also suitable for potable
Max system pressure 2175psi (15MPa)
water and foodstuffs, medium pressure
steam, and hardening fluids such as tar
and bitumen. Centrifugal pumps &
rotary equipment
Specifications Operating temperatures As valve stem
l WRAS approved for use with hot and Maximum shaft speed 3937fpm (20m/s)
cold potable water up to 185°F (85°C). (refer to James Walker for higher speed
Description duties)
A tough, high performance packing, Prime features Max system pressure 363psi (2.5MPa)
cross-plaited from texturized aramid yarns. l Suitable for very wide range of media.
Each yarn is uniformly impregnated with l Excellent abrasion resistance.
PTFE dispersion and a silicone-based l Long service life with minimal shaft wear. Reciprocating pumps & rams
lubricant that resists chemical attack at l Resilient and responsive in operation. Operating temperatures As valve stem
high temperatures. Although Duramid® is Maximum rod speed 295fpm (1.5m/s)
based on aramid fiber rather than PTFE, Chemical properties Max system pressure 2175psi (15MPa)
its exceptional qualities justify inclusion in Compatible with media in the range
this section alongside its sister products, pH 2-13, including water, oils, solvents, How supplied
Fluograf® and Hornet. medium strength acids and alkalis. Ex-stock: all popular square sections from
⁄÷•" to 1", in boxes containing 26 ⁄÷¢' (8m).
Also supplied as split preformed rings and
sets. Full fitting instructions are included.
Hornet
For slurries & abrasive media Typical applications Service capabilities
Valves and pumps handling highly abrasive
slurries in pulp and paper mills, sugar Valve stem duties
refineries, petrochemical plants, sewage Maximum temperature +500°F (+260°C)
works, metallurgical plants and china clay Minimum temperature -58°C (–50°C)
works. Also suitable for potable water,
Max system pressure 3626psi (25MPa)
foodstuffs and steam.
14 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
PTFE-based
Liongraf
Our universal, economical packing Typical applications Service capabilities
Widely regarded as an economical packing
for universal application and the reduction Valve stem duties
of stockholding requirements. Well proven Maximum temperature +500°F (+260°C)
in the petrochemical, power generation, Minimum temperature -148°F (–100°C)
marine and metallurgical sectors, and by
Max system pressure 1740psi (12MPa)
pump and valve manufacturers for OEM
installation.
Centrifugal pumps &
It is suitable for duties with steam, rotary equipment
condensate, effluents, fuels and oils, acids, Operating temperatures As valve stem
alkalis and chemical solutions. Maximum shaft speed 3445fpm (17.5m/s)
Max system pressure 290psi (2MPa)
Description Prime features
A highly reliable pump and valve packing l Strong, durable and extrusion resistant.
of cross-plait construction, based on l Reliable over a wide range of duties. Reciprocating pumps & rams
graphite and PTFE yarn that is thermally l Excellent chemical resistance.
stabilized then lubricated with a silicone- Operating temperatures As valve stem
l Low friction with high thermal
free compound. Maximum rod speed 394fpm (2m/s)
conductivity. Max system pressure 1160psi (8MPa)
Chemical properties
Compatible with media in the range How supplied
pH 0-14, including corrosive fluids and Ex-stock: all popular square sections from
solvents. ⁄÷•" to 1" in boxes containing 26 ⁄÷¢' (8m).
Also supplied as split preformed rings and
sets. Full fitting instructions are included.
Aquagraf
Potable water & chemical duties Typical applications Chemical properties
OEM and maintenance for valves and Compatible with media in the range
rotating plant in the water supply industry. It pH 1-13, excluding strong oxidising agents
is also safe for intermittent contact with food such as aqua regia, fuming nitric acid,
products. Resistance to a wide range of oleum and molten alkali metals.
media has extended its duties to chemical,
petrochemical and general processing Service capabilities
plant.
Valve stem duties
Specifications Maximum temperature +500°F (+260°C)
l WRAS approved for use with cold and
Minimum temperature -58°F (–50°C)
hot potable water up to 185°F (85°C).
Max system pressure 725psi (5MPa)
Description Prime features
A highly developed gland packing for l Hard wearing with great resilience. Centrifugal pumps &
valves and rotary pumps on potable water l Elastomeric core absorbs action of worn rotary equipment
systems. The yarn, which comprises shafts and valve stems. Operating temperatures As valve stem
a unique blend of expanded PTFE l Impressive low friction characteristics. Maximum shaft speed 3937fpm (20m/s)
and graphite lubricant, is cross plaited l Rapidly achieves stable conditions after Max system pressure 145psi (1MPa)
around a silicone rubber core for good pump start-up.
compressibility and recovery. How supplied
Ex-stock: all popular square sections from
⁄÷•" to 1", in boxes containing 26 ⁄÷¢' (8m).
Also supplied as split preformed rings and
sets. Full fitting instructions are included.
Fluolion® Filament D
For oxygen & food applications Typical applications Service capabilities
The purity of Fluolion Filament D enables
it to be used as a valve packing for oxygen Valve stem duties
services, as well as food and potable
water applications. It is also suitable for Maximum temperature +482°F (+250°C)
slow rotary duties with pumps and plant Minimum temperature -148°F (–100°C)
handling chemicals. Max system pressure 3626psi (25MPa)
Specifications
l PTFE yarns are manufactured in Centrifugal pumps &
accordance with FDA guidelines. rotary equipment
l BAM approved for service with gaseous Operating temperatures As valve stem
oxygen at up to 140°F (60°C) and 290psi Maximum shaft speed 787fpm (4m/s)
(2MPa), and with liquid oxygen to 482°F Max system pressure 145psi (1MPa)
Description (250°C) and 2175psi (15MPa).
Fluolion® Filament D is a cross-plaited l WRAS approved for use with cold and
packing made from tough, thermally stable hot potable water up to 185°F (85°C). Reciprocating pumps & rams
PTFE fiber yarn. This yarn is impregnated
with densified particles of PTFE to generate Prime features Operating temperatures As valve stem
additional lubrication. The packing is then l Excellent chemical resistance. Maximum rod speed 98fpm (0.5m/s)
cleaned of all organic matter and volatile l High purity for applications with oxygen,
Max system pressure 725psi (5MPa)
content. food and potable water.
l Clean and highly conformable for ease
How supplied
of fitting. Ex-stock: all popular square sections from
⁄÷•" to 1", in boxes containing 26 ⁄÷¢' (8m).
Chemical properties Also supplied as split preformed rings and
Compatible with media in the range pH sets. Full fitting instructions are included.
0-14, including corrosive acids and alkalis.
Fluolion® Filament L
High chemical resistance Typical applications Service capabilities
Used in pumps and valves where a high
performance, chemically resistant braided Valve stem duties
packing is needed.
Maximum temperature +482°F (+250°C)
Specifications Minimum temperature -148°F (–100°C)
l PTFE yarns are manufactured in Max system pressure 2175psi (15MPa)
accordance with FDA guidelines.
Centrifugal pumps &
Prime features rotary equipment
l Excellent chemical resistance. Operating temperatures As valve stem
l High performance sealing in pump and Maximum shaft speed 1969fpm (10m/s)
valve applications. Max system pressure 363psi (2.5MPa)
l Long and efficient working life with
Description
Fluolion® Filament L is a cross-plaited minimum maintenance requirements.
l Clean and highly conformable for ease Reciprocating pumps & rams
packing made from tough, thermally stable
PTFE fiber yarn. This yarn is impregnated of fitting. Operating temperatures As valve stem
with densified particles of PTFE to generate Maximum rod speed 197fpm (1m/s)
additional lubrication. Chemical properties Max system pressure 1450psi (10MPa)
Compatible with media in the range
pH 0-14, including corrosive acids and
How supplied
alkalis.
Ex-stock: all popular square sections from
⁄÷•" to 1", in boxes containing 26 ⁄÷¢' (8m).
Also supplied as split preformed rings and
sets. Full fitting instructions are included.
16 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
PTFE-based
Aluflon
For highly aggressive chemicals & slurries Typical applications Service capabilities
Developed for pumps that handle caustic
slurries in the alumina processing industry. Valve stem duties
Also recommended for duties throughout
Maximum temperature +266°F (+130°C)
the sewage treatment and chemical
Minimum temperature -58°F (–50°C)
sectors, on pumps and valves handling
Max system pressure 1450psi (10MPa)
media across the widest pH range,
including those containing suspended
solids. Centrifugal pumps &
rotary equipment
Prime features Operating temperatures As valve stem
l Outstanding chemical resistance, Maximum shaft speed 2362fpm (12m/s)
including strong acids and alkalis. Max system pressure 290psi (2MPa)
Description l Low friction and low wear on shaft
A white, conformable packing of cross- sleeves.
plait construction. Made from a highly l Long life with low maintenance. Reciprocating pumps & rams
developed yarn, comprising a fine l Easy to fit and remove. Operating temperatures As valve stem
reinforced glass insert with a spun l Free of graphite, silicone oils and Maximum rod speed 394fpm (2m/s)
cover of polyolefin fiber, all coated and abrasive fibres. Max system pressure 725psi (5MPa)
impregnated with PTFE micro-particles
and an inert pure petroleum lubricant. Chemical properties How supplied
Compatible with media in the range Ex-stock: all popular square sections from
pH 0-14. ⁄÷•" to 1", in boxes containing 26 ⁄÷¢' (8m).
Also supplied as split preformed rings and
sets. Live-loaded systems can be custom-
manufactured. Full fitting instructions are
included.
Valcor® Hi-Temp
Non-hazardous fibre construction for >1800°F l Far better value for money than other
non-hazardous high temperature
materials such as those made of pure
silica fiber.
18 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
XA range
All products in our XA range have been specifically developed by James Walker as economical replacements for traditional
asbestos-based braided packings.
Incoval XA
Wire-reinforced high-temperature packing Typical applications Chemical properties
Valves in heavy industry where high Compatible with media in the range
temperatures and pressures are involved. It pH 2-11, excluding corrosive chemicals.
is recommended for duties with oils
and petroleum products, air, water, Service capabilities
gases and non-corrosive chemicals.
Limited to low pressure/temperature steam Valve stem duties
services.
Maximum temperature +932°F (+500°C)
(not steam)
Prime features
l General purpose, high temperature valve Minimum temperature -40°F (–40°C)
packing. Max system pressure 2175psi (15MPa)
l Inconel® reinforced for heavy duties.
Description l Dense and resilient construction. How supplied
A resilient valve packing, comprising a Ex-stock: all popular square sections from
core of glass fibers bonded with a high ⁄÷•" to 1", in boxes containing 26 ⁄÷¢' (8m).
temperature polymer and treated with Also supplied as split preformed rings and
graphite and an organic corrosion inhibitor. sets. Full fitting instructions are included.
The core is over-braided with a jacket of
Inconel® reinforced glass yarn, treated with
high purity graphite binder and a corrosion
inhibitor to give a smooth low-friction
surface.
Fortuna XA
High speeds & high temperatures Typical applications Service capabilities
High speed rotary pumps on boiler feed
systems in the power generation, marine Valve stem duties
and petrochemical industries. Also other Maximum temperature +599°F (+315°C)
pump and valve duties involving high Minimum temperature -40°F (–40°C)
temperatures and extreme conditions with
Max system pressure 290psi (2MPa)
steam, process water and oils.
Supeta XA
Economical & versatile Typical applications Service capabilities
General service duties on pumps or valves
handling media such as steam, process Valve stem duties
water, waste water, oils and gases. Widely Maximum temperature 622°F (+350°C)
used in the chemical, petroleum, marine, Minimum temperature -40°F (–40°C)
power generation and sewage treatment
Max system pressure 1015psi (7MPa)
sectors.
20 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
XA range
Valcor® XA
General valve service at high temperatures Typical applications Service capabilities
Valves controlling hot gaseous media,
steam, condensate, process water, mild Valve stem duties
acids and alkalis, non-corrosive chemical
Maximum temperature +932°F (+500°C)
solutions, oils and many solvents.
Minimum temperature -58°F (–50°C)
Max system pressure 2175psi (15MPa)
This product is widely used in the chemical,
petroleum, marine, power generation, and (depending on temperature and
pulp and paper industries. mechanical conditions)
Armoured Supasca XA
Very high temperature static duties Typical applications Service capabilities
Extensively used as a furnace door and kiln
packing, and in exhaust expansion glands. Static duties - furnace doors
It can also be used for very slow rotating
duties when liberally coated with our Maximum temperature +1256°F (+680°C)
Copper Anti-Seize Compound Minimum temperature +14°F (-10°C)
(page 32). Max system pressures
Static 72.5psi (500kPa)
Prime features Rotary 14.5psi (100kPa)
l Tough and flexible packing for arduous
duties. How supplied
l Recommended as a furnace door and All popular round or square cross sections
kiln packing. from ⁄÷•" to 2", in lengths to order. Also
Description l Suitable for exhaust expansion glands. supplied as split preformed rings and sets.
This high-temperature packing comprises l Can be used with super-heated steam. Full fitting instructions are included.
a core of glass yarns, coated with l Operates on static sealing duties at up
graphite and protected by a tough sleeve to 1256°F (680°C).
of braided copper wire.
Chemical properties
Resists super-heated steam, hot air and
hot gases in the range pH 4-10.
TorrLid 162B
Vacuum seal for aluminum crucible lids Prime features Service capabilities
l Developed specifically as a vacuum seal
for aluminum crucible lids.
l Readily withstands the temperatures and
Static duties — crucible lids
compressive forces involved. Maximum temperature
l Tough silicone rubber coating provides Suitable for holding a vacuum over
abrasion resistance. molten aluminum in crucibles.
l Withstands repeated opening/closing Consult James Walker
cycles.
Pressure range From partial vacuum
up to 131psi (0.9MPa)
Typical applications
This exceptionally well-proven product is
Description used worldwide as a vacuum lid seal for How supplied
This specialised product features a crucibles containing molten aluminum. Manufactured to order to meet customers’
resilient, hollow-centred core of ethylene- It has also proved a great success on new specific requirements. Full fitting
propylene elastomer, over-braided with a plant using AP35 technology. instructions are included.
jacket of filament glass yarns. The exterior
surface is coated with a layer of red-
colored silicone rubber.
TorrLid 297
Higher temperature crucible lid seal Prime features Service capabilities
l Developed as a higher temperature
vacuum seal for the lids of crucibles as
used in specific smelting plants.
Static duties — crucible lids
l Readily withstands the temperatures and Maximum temperature
compressive forces involved. Suitable for holding a vacuum over
l Tough silicone rubber coating provides molten aluminum in crucibles.
abrasion resistance. Consult James Walker
l Withstands repeated opening/closing
cycles. Pressure range From partial vacuum
up to 131psi (0.9MPa)
Typical applications
This well-proven product is used as a
Description vacuum lid seal for crucibles containing How supplied
This highly specialised product features a molten aluminum. It is particularly popular Manufactured to order to meet customers’
resilient, hollow-centred elastomeric core, with smelting plants in the southern specific requirements. Full fitting
that resists higher temperatures than the hemisphere. instructions are included.
ethylene-propylene used in TorrLid 162B.
The core is over-braided with a jacket
of filament glass yarns, and the exterior
surface is then coated with a layer of grey-
colored silicone rubber.
22 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
Flax, cotton & ramie
Ramiex
Our strongest natural fibre packing Typical applications Service capabilities
Used with great success in the mining
and quarrying industries on reciprocating Valve stem duties
pumps working at 4350psi (30MPa) with Maximum temperature +248°F (+120°C)
water containing highly abrasive particles. Minimum temperature -22°F (–30°C)
Also used for water-based hydraulic
Max system pressure 3626psi (25MPa)
systems, pulp and paper processing
with cellulose slurry, brine circulation,
cooling water systems, and with fluids that Centrifugal pumps &
crystallise or contain suspended solids. rotary equipment
Operating temperatures As valve stem
Prime features Maximum shaft speed 3445fpm (17.5m/s)
l Excellent extrusion resistance. Max system pressure 290psi (2MPa)
Description l Excellent abrasive resistance.
Versatile, high-performance packing, cross- l Excellent rot resistance.
plaited from top-quality bleached ramie l Low friction and low wear.
Reciprocating pumps & rams
fiber yarns that are impregnated with an l Kind to shafts and sleeves. Operating temperatures As valve stem
advanced PTFE dispersion lubricant. The Maximum rod speed 394fpm (2m/s)
result is a consistent packing of uniform Chemical properties Max system pressure 3626psi (25MPa)
density and compressibility. Compatible with media in the range (can be extended to 10,153psi / 70MPa with special
pH 4-11. support rings on some applications)
Ramie, a tropical nettle plant, produces a
fiber of extreme durability, rot resistance How supplied
and significantly greater strength than flax, Ex-stock: all popular square sections
cotton or hemp. ⁄÷•" to 1", in boxes containing 26 ⁄÷¢' (8m).
Also supplied as split preformed rings and
sets. Full fitting instructions are included.
Cottonpak Type E
White, graphite-free cotton packing Typical applications
Rotary pumps, and reciprocating plant with Centrifugal pumps &
soft metal rams, handling cold water. rotary equipment
Operating temperatures As valve stem
Prime features Maximum shaft speed 1378fpm (7m/s)
l Clean, white and graphite-free. Max system pressure 145psi (1MPa)
l Good flexibility.
l High lubricity in aqueous environments.
l Kind to shafts and sleeves. Reciprocating pumps & rams
l Easy to handle, cut and fit. Operating temperatures As valve stem
Maximum rod speed 197fpm (1m/s)
Chemical properties Max system pressure 725psi (5MPa)
Compatible with media in the range
Description pH 6-8. How supplied
Superior quality packing, plaited from fine Ex-stock: all popular square sections from
cotton yarns of soft texture. Each yarn is Service capabilities ⁄÷•" to 1", in boxes containing 26 ⁄÷¢' (8m).
uniformly impregnated under heat and Larger cross-sections manufactured to
pressure with a tallow lubricant prior to Valve stem duties order. Also supplied as split preformed
plaiting. rings and sets. Full fitting instructions are
Maximum temperature +194°F (+90°C)
included.
Minimum temperature –40°F (–40°C)
Max system pressure 725psi (5MPa)
Fluolion® Sturntite
Premier packing for marine duties Typical applications
Very well proven product on marine duties
Centrifugal pumps &
– widely used on stern glands and rudder rotary equipment
posts of all sizes, bilge pumps and valves, Operating temperatures As valve stem
etc. Non-marine applications include pumps Maximum shaft speed 1772fpm (9m/s)
and valves handling waste water or sewage. Max system pressure 363psi (2.5MPa)
Prime features
l Designed for marine duties.
Reciprocating pumps & rams
l Long life with low leakage. Operating temperatures As valve stem
l Reduced shaft wear. Maximum rod speed 197fpm (1m/s)
l Flexible for easy fitting. Max system pressure 1450psi (10MPa)
Sextant
Economical packing for marine duties Typical applications Service capabilities
Economical and reliable grade frequently
used for marine stern glands and rudder Valve stem duties
posts. Also popular for general service
Maximum temperature +194°F (+90°C)
in hydraulic rams, valves, reciprocating
Minimum temperature -40°F (–40°C)
pumps and accumulators, particularly in
Max system pressure 1450psi (10MPa)
aqueous environments.
24 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
Flax, cotton & ramie
Tankatite® range
Tankatite® represents state-of-the-art packing design and manufacture. This comprehensive range of tank lid packings has been
constantly developed to meet increasingly stringent international regulations that cover the maritime transport of chemical and
potentially hazardous cargoes. Extensions to the range cover the requirements of road and rail transport, and static or mobile
tank containers.
Tankatite® 440
For all types of vessel Typical applications Chemical properties
Sealing of tank lids, main hatches, Inert to media in range pH 0-14, including
inspection and cleaning covers on tankers all known bulk liquid cargoes in all IMO
carrying all known bulk liquid cargoes in all classes.
International Maritime Organisation (IMO)
classes. Service capabilities
Tankatite® 660
For heated cargoes Typical applications Chemical properties
Seals for tank lids that cover heated Inert to media in range pH 0-14, including
cargoes, such a molten bitumen, which all known bulk liquid cargoes in all IMO
need to be transported at elevated classes.
temperatures to prevent solidification in the
tank. Service capabilities
26 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
Tank lid seals
Tankatite® 250
For road & rail tankers Typical applications Chemical properties
Seals to fit the smaller tank lid recesses of Inert to all chemical media in range pH
road and rail tankers. 1-13 at normal operating temperatures,
excluding fluorine gas.
Prime features
l Easy to cut and fit in small section lid Service capabilities
recesses.
l Tough, resilient and long-life product. Static duties - tank lids
l Withstands repeated opening/closing
cycles. Maximum temperature +212°F (+100°C)
l Controls emission levels from tanks. Minimum temperature -22°F (-30°C)
l Protects tank contents from Maximum pressure 7.3psi (50kPa)
contamination.
Description l Withstands arduous cleaning systems. How supplied
A modified form of Tankatite® 440, As length form packing or endless
specifically developed for production at rings, in sections to fit popular lid recess
smaller and rectangular cross sections. dimensions. Full fitting instructions are
included.
conditions. Comprises Supagraf® Molded thermal cycling, pressure variations in How supplied
Rings (page 10) of differing graphite media, and vibration. Each Valvemaster® set is custom-designed
construction located along the valve stem – l Suitable for wide range of media. and manufactured to match precisely
to give even distribution of radial stress on l Low breakout friction for smooth valve the physical dimensions and operating
the gland – with lubrication/anti-extrusion operation. conditions of a specific valve. Full fitting
instructions are included.
Supagraf® PremiPak
Superior combination packing sets to materials, construction, and the level of Most applications require VOC fugitive
fugitive emission control required. emission control to 100ppm or better, with
a maximum working temperature capability
Construction of up to +842°F (+450°C).
End rings: Supagraf® Premier (page 6)
braided graphite filament packing for Prime features
l Reduced valve stem shudder/hesitation.
high strength and extrusion resistance,
l Low break-out friction.
with excellent sealability and third-party
l Long working life with minimal
certification to TA Luft emission control
requirements. These rings conform to maintenance.
MESC SPE 85/204. Chemical properties
Chemically inert within the range pH 1-14,
Intermediate rings: Supagraf® Molded Valve
excluding stemoxidising
strong duties agents.
Description Rings (page 10) of high purity graphite foil,
Supagraf® PremiPak is a superior that offer low friction and excellent heat Maximum temperature +842°F (+450°C)
combination packing set for valves. It is Typical
Minimumservice capabilities
temperature -328°F (–200°C)
transfer characteristics, plus high efficiency
based on two of our class-leading graphite sealing. These rings conform to MESC SPE Max system pressure 3626psi (25MPa)
products that conform to Shell material 85/203.
specifications MESC SPE 85/203 and How supplied
85/204. Typical applications Precision molded rings in endless form
Stop valves and control valves performing or with single split to meet customers’
We also design and supply other high arduous duties with media such as requirements. Sections: ⁄÷•" to 1·÷¡§' .
performance combination packing sets hydrocarbon liquid fuel and gases. Diameters: ‹÷¡§" to 19 ⁄⁄÷¡§" ID. Full fitting
for valves, to meet end users’ defined instructions are included. Other designs of
standards and specifications with regard combination set supplied to order.
28 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
Complementary products & services
Fluocord
For rapid valve repacking Typical applications Chemical properties
A highly efficient maintenance expedient Compatible with media in range pH 0-14,
for swift repacking of valves where excluding molten alkali metals, fluorine
temperatures and pressures are modest. and some fluorine compounds at elevated
Ideal for emergency application when the temperatures.
usual grade of packing is unavailable.
Often used for longer-term duties on non- Service capabilities
critical services. Can also be used to form
emergency flange gaskets. Valve stem duties
Maximum temperature +482°F (+250°C)
Prime features Minimum temperature -238°F (–150°C)
l Very versatile maintenance product that
Description Max system pressure 508psi (3.5MPa)
Resilient cord-type packing comprising a reduces stockholding levels.
l Swift valve repacking — wrap several
core of unsintered PTFE, spirally wrapped
with a covering of PTFE tape. This turns around a stem and tighten the How supplied
construction allows the product readily to gland follower. Ex-stock: spools containing ‹÷#™" diameter
conform to any housing annulus whilst at l Each size readily deforms to fit a range cord x 78 ‹÷¢' length; fi÷#™" x 26 ⁄÷¢'; ‡÷#™" x 13';
the same time resisting extrusion. of housings. or ·÷#™" x 6⁄÷™'.
l Reduces risk of valve stem corrosion.
Supagraf® Tape
Maintenance expedient for valves Typical applications Chemical properties
This maintenance expedient is wound See Supagraf® Moulded Rings (p10).
around a valve stem — then compressed
into the stuffing box. It is suitable for valves Service capabilities
handling high temperature steam, potable
water, demineralized water, petroleum Valve stem duties
products, heat transfer media, organic and Maximum temperature +932°F (+500°C)
inorganic acids, and alkalis. Self-adhesive Minimum temperature -328°F (–200°C)
version can be used as an emergency
Max system pressure 1015psi (7MPa)
gasket replacement.
30 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
Complementary products & services
Packing Extractors
Trouble free removal of old packings Description Service capabilities
Highly effective and widely used l Size 1: ‹÷¡§" and ⁄÷¢" packings.
extraction tools, with a long flexible l Size 2: fi÷¡§" and ‹÷•" packings.
shank to gain access to glands in l Size 3: ‡÷¡§", ⁄÷™" and fi÷•" packings.
difficult positions. The corkscrew tips are l Size 4: ⁄‹÷¡§" packings and larger.
designed to embed firmly in all types
of length-form packing, including badly How supplied
worn and hardened products. A T-handle Fixed-tip extractors: individual sizes, or as
provides good grip for both screw action full set of Sizes 1 – 4.
and the efficient removal of packing. Replaceable-tip extractors: individual
sizes, or as full set of Sizes 1 – 4.
Replacement tips: supplied individually.
Molyon Grease
Excellent adhesion properties (bentone type) and fine particles of pure Chemical properties
high quality molybdenum disulfide. Compatible with most engineering
materials, excluding items made from
Typical applications natural, butyl or ethylene-propylene rubber.
Lubrication of braided packing and seals
prior to installation for duties with non- Service capabilities
corrosive media or environments. Also Maximum temperature +302°F (+150°C)
used as a general lubricant. Minimum temperature -4°F (–20°C)
Silicone Grease
For food & potable water plant processing and potable water industries. Chemical properties
Can be used as an anti-seize compound, Compatible with most engineering
and also gives a degree of protection materials, including rubbers and plastics,
against dust, moisture, chemicals and but excluding items made from silicone or
corrosion. fluorosilicone compounds. Low halogen
content: <20ppm chloride.
Specifications
l Produced from FDA-compliant materials. Service capabilities/properties
l WRAS listed for use with cold and hot Maximum temperature +392°F (+200°C)
potable water up to 185°F (85°C). Minimum temperature -58°F (–50°C)
Flash point >+572°F (>+300°C)
Prime features Penetration test (ASTM D217)
Description l Excellent lubricating performance across Unworked 250-280
A translucent gel that combines the wide temperature range. Worked 250-285
properties of silicone fluid with a degree l Very low order of toxicity. Radiation resistance
of structure to provide a stiff consistency. l Wide chemical resistance. Onset of gellation
l Safe to use with most rubbers and (approx) 10Mrad [105Gy]
Typical applications plastics.
A versatile grease for lubricating packings How supplied
and seals prior to installation, as well Ex-stock: packs of 10 x 175g (6oz) tubes
as valves and taps used in the food or 1kg (2.2lb) tubs. Other quantities
supplied on request.
Graphite Grease
Lubricant & anti-seize compound Description Prime features
Thick paste of non-melting petroleum l Contains 50 per cent graphite by weight.
greases (bentone type) blended with a l Good tack/adhesion on metal surfaces.
high quality lubricating grade of natural fine l Spreads with reasonable ease.
graphite particles. l No solvent content.
32 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
Custom-designed & non-standard products
Immediate supply materials, products and manufacturing User training is another important service
techniques that improve the sealing of we provide. Our specialists regularly host
today’s plant and meet tomorrow’s sealing sessions to instruct plant engineers and
demands. designers in the selection and installation
of sealing products.
They also work on joint venture research
projects with other organisations in the James Walker quality
European Sealing Association – of which
we are a founder member – and sponsor
high-level research in partnership with world
leading users of sealing technology.
34 To order or get further details, call your local contact shown on rear cover or listed at www.jameswalker.biz
Alphabetical index
James Walker & Co (UK) James Walker Deutschland James Walker New Zealand
Tel: +44 (0)1270 536000 Tel: +49 (0)40 386 0810 Tel: +64 (0)9 272 1599
Fax: +44 (0)1270 536100 Fax: +49 (0)40 389 3230 Fax: +64 (0)9 272 3061
Email: csc@jameswalker.biz Email: sales.de@jameswalker.biz Email: sales.nz@jameswalker.biz
James Walker Benelux James Walker Iberica James Walker Oil & Gas (USA)
(Belgium) Tel: +34 94 447 0099 Tel: +1 281 875 0002
Tel: +32 3 820 7900 Fax: +34 94 447 1077 Fax: +1 281 875 0188
Fax: +32 3 828 5484 Email: sales.es@jameswalker.biz Email: oilandgas@jameswalker.biz
Email: sales.be@jameswalker.biz
(Netherlands) James Walker Ireland James Walker Singapore
Tel: +31 (0)186 633111 Tel: +353 (0)21 432 3626 Tel: +65 6777 9896
Fax: +31 (0)186 633110 Fax: +353 (0)21 432 3623 Fax: +65 6777 6102
Email: sales.nl@jameswalker.biz Email: sales.ie@jameswalker.biz Email: sales.sg@jameswalker.biz
James Walker China James Walker Italiana James Walker South Africa
Tel: +86 21 6876 9351 Tel: +39 02 257 8308 Tel: +27 (0)31 205 6251/2/3
Fax: +86 21 6876 9352 Fax: +39 02 263 00487 Fax: +27 (0)31 205 6266
Email: sales.cn@jameswalker.biz Email: sales.it@jameswalker.biz Email: sales.za@jameswalker.biz