Professional Documents
Culture Documents
Cal Bearing Without Weight PHT
Cal Bearing Without Weight PHT
Cal Bearing Without Weight PHT
due to a better overview of a full page display instead of a one line display
it is recommended to use a Laptop and Hyper Terminal
to carry out this calibration
2 additional load cells are installed
between the bearing on the infeed side
and the suspension
to carry out a calibration the following preconditions are required
> slide gate between Rotor and silo must be completely closed
1 Syst-Parameter
is being displayed now
CONFIGURATION
press key arrow down until
18.10.2005 12:45 A Feeding meas.
A Feeding meas.
is being displayed