Download as pdf or txt
Download as pdf or txt
You are on page 1of 31

Test Pattern

(0999DJM210322008) )/999DJM21/322//8)
DISTANCE LEARNING PROGRAMME JEE(Main)
TEST # 10
(Academic Session : 2022 - 2023) 13-11-2022
JEE(MAIN) : LEADER TEST SERIES / JOINT PACKAGE COURSE
Time : 3 Hours 12th Undergoing/Pass Students Maximum Marks : 300
Test Type : Unit Test # 08
READ THE INSTRUCTIONS CAREFULLY/ Ïi;k bu funsZ'kksa dks /;ku ls i<+sa
Important Instructions : egRoiw.kZ funsZ'k :

ds vuqns'kksa ds fcuk eqgjsa u rksM+s


1. Immediately fill in the form number on this page of the
1. ijh{kk iqfLrdk ds bl i`"B ij vko';d fooj.k uhys@dkys ckWy ikbaV
Test Booklet with Blue/Black Ball Point Pen. Use of pencil
is strictly prohibited.
isu ls rRdky HkjsaA isfUly dk iz;ksx fcYdqy oftZr gSaA
2. The candidates should not write their Form Number 2. ijh{kkFkhZ viuk QkeZ ua - (fu/kkZfjr txg ds vfrfjä) ijh{kk
anywhere else (except in the specified space) on the Test
iqfLrdk@mÙkj i= ij dgha vkSj u fy[ksaA
Booklet/Answer Sheet.
3. The Test Booklet consists of 90 questions. 3. bl ijh{kk iqfLrdk esa 90 iz'u gaSA
4. There are three parts in the question paper 1,2,3 4. bl ijh{kk iqfLrdk esa rhu Hkkx 1, 2, 3 gSa] ftlds izR;sd Hkkx esa HkkSfrd
consisting of Physics, Chemistry and Mathematics foKku] jlk;u foKku ,oa xf.kr ds 30 iz'u gSa vkSj izR;sd fo"k;
having 30 questions in each subject and each subject
esa 2 [k.M gSA
having Two sections.
(i) [k.M-I esa 20 cgqfodYih; iz'u gAS ftuds ds oy ,d fodYi

DO NOT BREAK THE SEALS WITHOUT BEING INSTRUCTED TO DO SO BY THE INVIGILATOR/fujh{kd


(i) Section-I contains 20 multiple choice questions
with only one correct option. lgh gSaA
Marking scheme : +4 for correct answer, 0 if not
attempted and –1 in all other cases.
va d ;ks tuk : +4 lgh mÙkj ds fy,] 0 iz;kl ugha djus ij
(ii) Section-II contains 10 Numerical Value Type rFkk –1 vU; lHkh voLFkkvksa esaA
questions. Attempt any 5 questions. First 5 (ii) [k.M -II es a 10 la [;kRed eku iz d kj ds iz 'u gS A fdUgh 5
attempted questions will be considered for marking. iz'uksa dk mÙkj nhft,A fd;s x;s iz'uksa esa ls dsoy izFke ik¡p
Marking scheme : +4 for correct answer, 0 if not iz'uksa dks gh vad fn;s tk;saxsA
attempted and –1 in all other cases. va d ;ks tuk : +4 lgh mÙkj ds fy,] 0 iz;kl ugha djus ij
5. Use Blue/Black Ball Point Pen only for writting rFkk –1 vU; lHkh voLFkkvksa esaA
particulars/marking responses on Side–1 and Side–2 of the
5. mÙkj i= ds i`"B–1 ,oa i`"B–2 ij okafNr fooj.k ,oa mÙkj vafdr djus
Answer Sheet. Use of pencil is strictly prohibited.
gsrq dsoy uhys@dkys ckWy ikbaV isu dk gh iz;ksx djsAa isfUly dk iz;ksx
6. No candidate is allowed to carry any textual material, loZFkk oftZr gSA
printed or written, bits of papers, mobile phone any 6. ijh{kkFkhZ }kjk ijh{kk d{k @ gkWy esa ifjp; i= ds vykok fdlh Hkh izdkj
electronic device etc, except the Identity Card inside the dh ikB~; lkexzh eqfær ;k gLrfyf[kr dkxt dh ifpZ;ksa] eksckby
examination hall/room. Qksu ;k fdlh Hkh izdkj ds bysDVªkfud midj.kksa ;k fdlh vU; izdkj
7. Rough work is to be done on the space provided for this dh lkexzh dks ys tkus ;k mi;ksx djus dh vuqefr ugha gSaA
purpose in the Test Booklet only. 7. jQ dk;Z ijh{kk iqfLrdk esa dsoy fu/kkZfjr txg ij gh dhft;sA
8. On completion of the test, the candidate must hand over 8. ijh{kk lekIr gksus ij] ijh{kkFkhZ d{k@gkWy NksM+u s ls iwoZ mÙkj i= d{k
the Answer Sheet to the invigilator on duty in the Room/ fujh{kd dks vo'; lkSai nsaA ijh{kkFkhZ vius lkFk bl ijh{kk iq fLrdk
Hall. However, the candidate are allowed to take away dks ys tk ldrs gSaA
this Test Booklet with them. 9. mÙkj i= dks u eks M+ s a ,oa u gh ml ij vU; fu'kku yxk,s aA
9. Do not fold or make any stray marks on the Answer Sheet. 10. g = 10 m/s2 iz;q Dr djs a ] tc rd fd vU; dks bZ eku ugha
10. Take g = 10 m/s2 unless otherwise stated. fn;k x;k gks A

Name of the Candidate (in Capitals)


ijh{kkFkhZ dk uke (cM+s v{kjksa esa) :
Form Number : in figures
QkWeZ uEcj : vadksa esa
: in words
: 'kCnksa esa
Centre of Examination (in Capitals) :
ijh{kk dsUæ (cM+s v{kjksa esa) :
Candidate’s Signature : Invigilator’s Signature :
ijh{kkFkhZ ds gLrk{kj : fujh{kd ds gLrk{kj :
Your Target is to secure Good Rank in JEE(Main) 2023
Corporate Office : ALLEN CAREER INSTITUTE Pvt. Ltd., “SANKALP”, CP-6, Indra Vihar, Kota (Rajasthan) INDIA-324005
+91-744-2757575 info@allen.ac.in www.allen.ac.in
LTS / Page 1/29
ALLEN
Topic : Properties of Matter, Fluid Mechanics, Gravitation, Wave Optics (Nature of Light, Interference,
Diffraction and Polarisation) & EM Waves

PART-1 : PHYSICS

SECTION-I : (Maximum Marks: 80) खण्ड –I : (अधिकतम अंक: 80)


This section contains 20 questions. Each question has इस खंड में 20 प्रश्न हैं। प्रत्येक प्रश्न में सही उत्तर के लिए 4 विकल्प हैं।
4 options for correct answer. Multiple-Choice बहुविकल्पीय प्रश्न (MCQs) के वल एक विकल्प सही है। प्रत्येक प्रश्न
Questions (MCQs) Only one option is correct. For के लिए, अंक निम्नानुसार दिए जाएंगे:

each question, marks will be awarded as follows:


पूर्ण अंक           :    +4 यदि सही उत्तर चुना गया है।

Full Marks          :   +4 If correct answer is selected.


शून्य अंक         :    0 यदि कोई भी विकल्प नहीं चुना गया है।

Zero Marks        :   0 If none of the option is selected.


ऋणात्मक अंक  :    –1 यदि गलत विकल्प चुना गया है।
Negative Marks  :   –1 If wrong option is selected.
1. In YDSE, an interference pattern is obtained 1. यंग के प्रयोग में दो कला सम्बद्ध स्त्राेत S1 व S2
for λ = 6000 Å, coming from two coherent से  6000 Å तरंगदैर्ध्य के प्रकाश से व्यतिकरण प्रतिरूप
sources S1 and S2. At certain point P on the प्राप्त किया जाता है। किसी बिन्दु P पर तीसरी काली
screen third dark fringe is formed, then the path फ्रिं ज प्राप्त होती है तो पथान्तर S2P–S1P का मान
difference S2P–S1P in micron is :-  माइक्रोन में होगा :-
(A) 0.75 (A) 0.75
(B) 1.5 (B) 1.5
(C) 3.0 (C) 3.0
(D) 4.5 (D) 4.5
2. The wavelength of the light used in young's 2. यंग के द्विस्लिट प्रयोग में प्रयुक्त प्रकाश की तरंगदैर्ध्य λ है।
double slit experiment is λ. The intensity at a
जिस बिन्दु पर पथान्तर λ/6 है, वहाँ तीव्रता I है। यदि I0
point on the screen is I, where the path
difference is  λ/6. If I0 denotes the maximum अधिकतम तीव्रता को प्रदर्शित करे तो I व I0 का अनुपात
intensity, then the ratio of I and I0 is :- ज्ञात कीजिये :-
(A) 0.866 (A) 0.866
(B) 0.5 (B) 0.5
(C) 0.707 (C) 0.707
(D) 0.75 (D) 0.75
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
LTS - Page 2/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN
3. In young's experiment, the two slits are d 3. यंग के प्रयोग में, दोनो स्लिटो के मध्य दूरी d है।
distance apart. Interference pattern is observed स्लिट के तल से D दूरी पर रखे पर्दे पर व्यतिकरण
on a screen at a distance D from the slits. A dark प्रतिरूप प्राप्त होता है। किसी स्लिट के बिल्कु ल सामने
fringe is observed on the screen directly opposite एक काली फ्रिं ज प्राप्त होती है। प्रकाश की तरंगदैर्ध्य
to one of slits. The wavelength of light is :-  होगी :-
D2 d2 D2 d2
(A) (B) (A) (B)
2d 2D 2d 2D
D2 d2 D2 d2
(C) (D) (C) (D)
d D d D

4. In YDSE, d = 1 mm, λ = 6000 Å and D = 1 m. 4. यंग के प्रयोग में, d = 1 mm, λ = 6000 Å तथा D = 1
The minimum distance between two points on
m परदे पर उन दोनो बिन्दुओं के मध्य दूरी जहाँ तीव्रता
screen having 75% intensity of the maximum
intensity will be :-  अधिकतम तीव्रता की 75% हो :-
(A) 0.50 mm (A) 0.50 mm
(B) 0.40 mm (B) 0.40 mm
(C) 0.30 mm (C) 0.30 mm
(D) 0.20 mm (D) 0.20 mm

5. In YDSE, intensity of light passes through both 5. YDSE में, दोनो स्लिट से गुजरने वाल प्रकाश की
slit is equal. A 100% transparent thin film is तीव्रता समान है। एक 100% पारदर्शक पतली फिल्म को
placed infront of one of the slits. Now the
एक स्लिट के सामने रख दिया जाता है। अब के न्द्र पर
intensity on the centre becomes 25% of the
previous intensity. The wavelength of light is तीव्रता प्रारम्भ की 25% रह जाती है। प्रकाश की
4000 Å and refractive index 1.5. The minimum तरंगदैर्ध्य 4000 Å तथा अपवर्तनांक 1.5 है। काँच की
thickness of the glass slab is :- स्लेब की न्यूनतम मोटाई है :-
(A) 1.23 × 10–7 m (A) 1.23 × 10–7 m
(B) 2.67 × 10–7 m (B) 2.67 × 10–7 m
(C) 4 × 10–7 m (C) 4 × 10–7 m
(D) None of these (D) इनमें से कोई नहीं
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 3/29
ALLEN
6. A polaroid examines two adjacent polarised light 6. एक  ध्रुवक से दो ध्रुवित प्रकाश A व B को जाँचा
beams A and B whose planes of polarisation are जाता है। दोनो प्रकाश के ध्रुवक तल आपस में
mutually at right angles. In one position of the लम्बवत् है। ध्रुवक की एक स्थिति में, पुंज B की
polaroid, the beam B shows zero intensity. From तीव्रता शून्य प्रदर्शित होती है। इस स्थिति से, ध्रुवक
this position, a rotation of 30° in polaroid shows को 30° कोण से घूमाने पर दोनो पुंजो की समान
the two beams of equal intensities. Find the तीव्रता प्रदर्शित होती है। तीव्रता अनुपात I A /I B ज्ञात
intensity ratio IA/IB of the two beams. करो।
– –
(A) 1 : 3 (B) √ 3 : 2 (A) 1 : 3 (B) √ 3 : 2
– –
(C) 1 : 1 (D) 1 : √ 2 (C) 1 : 1 (D) 1 : √ 2

7. Interference fringes were produced in Young's 7. यंग के प्रयोग में 5000 Å तरंगदैर्ध्य के प्रकाश से
double slit experiment using light of wavelength व्यतिकरण फ्रिं जे प्राप्त होती है। जब 2.5 × 10–3 सेमी
5000 Å. When a film 2.5 × 10–3 cm thick was मोटाई की फिल्म एक स्लिट के सामने रख दी जाती है तो
placed over one of the slits, the fringe pattern व्यतिकरण प्रतिरूप 20 फ्रिं जों की चौड़ाई के बराबर
shifted by a distance equal to 20 fringe width. The विस्थापित हो जाता है। फिल्म के पदार्थ का अपवर्तनांक
refractive index of the material of the film can be : होगा :-
(A) 1.25 (B) 1.33 (A) 1.25 (B) 1.33
(C) 1.5 (D) 1.4 (C) 1.5 (D) 1.4
8. The width of a single slit, if the first minimum 8. 6980 Å तरंगदैर्ध्य वाले प्रकाश से यदि 2° के कोण
is observed at an angle of 2° with a light of पर  पहले निम्निष्ठ प्रेषित होता हैं, तब एकल स्लिट
wavelength 6980 Å, (in mm) is : की चौड़ाई है -
(A) 0.2 (B) 2 × 10–5 (A) 0.2 (B) 2 × 10–5
(C) 2 × 105 (D) 0.02 (C) 2 × 105 (D) 0.02
9. A radiation of energy E falls normally on a 9. ऊर्जा E का एक विकिरण अभिलम्बवत् एक पूर्णतः
perfectly reflecting surface. The momentum परावर्तक सतह पर पड़ता है। सतह को प्रदान किया गया
transferred to the surface is : संवेग है
(A) E/c (B) 2E/c (A) E/c (B) 2E/c
(C) Ec (D) E/c2 (C) Ec (D) E/c2
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
LTS - Page 4/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN
10. A radio wave of frequency 90 MHz (FM) 10. 90 MHz (FM) की एक सूक्ष्म तरंग एक फे राइट दंड
enters a ferrite rod. In ferrite, ∈r = 103 and (ferrite rod) में प्रवेश करती है। फे राइट के
μ r = 10, then the velocity and wavelength of लिये  ∈ r = 10 3 तथा μ r = 10 हैं, तब फे राइट दंड के
ferrite are :- भीतर तरंग की तरंगदैर्ध्य तथा वेग होंगे :-
(A) 3 × 106 ms–1, 3.33 × 10–2m (A) 3 × 106 ms–1, 3.33 × 10–2m
(B) 3 × 106ms–1, 3.33 × 10–4m (B) 3 × 106ms–1, 3.33 × 10–4m
(C) 3 × 106 ms–1, 3.33 × 10–3m (C) 3 × 106 ms–1, 3.33 × 10–3m
(D) None of the above (D) इनमें से कोई नहीं
11. The average energy density of an electromagnetic 11. E = (50 N/C)sin( ω t – kx) द्वारा व्यक्त एक
wave given by, E = (50 N/C)sin(wt – kx) will be वैद्युत चुम्बकीय तरंग का माध्य ऊर्जा घनत्व लगभग
nearly : होगाः
(A) 10–8J/m3 (B) 10–7J/m3 (A) 10–8J/m3 (B) 10–7J/m3
(C) 10–6J/m3 (D) 10–5J/m3 (C) 10–6J/m3 (D) 10–5J/m3
12. The intensity of a plane electromagnetic wave 12. एक समतल वैद्युत चुम्बकीय तरंग की तीव्रता 5 W/m2 है।
is 5 W/m2. It is incident on a perfectly यह एक पूर्णतः परावर्तनीय पृष्ठ पर आपत्तित होती है।
reflecting surface. Find the radiation pressure : विकिरण दाब का मान ज्ञात करियेः
(A) 3.33 × 10–9N/m2 (A) 3.33 × 10–9N/m2
(B) 3.33 × 10–8N/m2 (B) 3.33 × 10–8N/m2
(C) 8.0 × 10–8 N/m2 (C) 8.0 × 10–8 N/m2
(D) 8.0 × 10–9 N/m2 (D) 8.0 × 10–9 N/m2
13. If  E ⃗  and  B ⃗  are the electric and magnetic field 13. यदि  E ⃗   तथा  B ⃗   वैद्युत चुम्बकीय तरंगों के क्रमशः
vectors of electromagnetic waves, then the वैद्युत तथा चुम्बकीय क्षेत्र  हैं, तो वैद्युत चुम्बकीय
direction of propagation of electromagnetic तरंग संचरण की दिशा किसकी दिशा के अनुदिश
wave is along the direction of : होगा?
(A) E ⃗  (A) E ⃗ 

(B) B ⃗  (B) B ⃗ 

(C) E ⃗ × B ⃗  (C) E ⃗ × B ⃗ 

(D) None of these (D) इनमें से कोई नहीं


LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 5/29
ALLEN
14. Acceleration due to gravity at the centre of 14. पृथ् वी के कें द्र प र गु रू त् वी य त् व र ण का मा न
the earth is :- हो गा : -
g g
(A) g (B) (A) g (B)
2 2
(C) zero (D) infinite (C) शून्य (D) अनन्त

15. If the distance between the centres of earth and 15. यदि पृथ्वी व चन्द्रमा के के न्द्रों के मध्य दूरी D और पृथ्वी
moon is D and mass of earth is 81 times that of का द्रव्यमान, चन्द्रमा के द्रव्यमान का 81 गुना है, तो पृथ्वी
moon. At what distance from the centre of के के न्द्र से कितनी दूरी पर गुरूत्वीय क्षेत्र का मान शून्य
earth gravitational field will be zero : होगा :
D 2D D 2D
(A) (B) (A) (B)
2 3 2 3
4D 9D 4D 9D
(C) (D) (C) (D)
5 10 5 10
16. Figure shows elliptical path abcd of a planet 16. एक ग्रह सूर्य S के चारों ओर एक दीर्घवृतीय कक्ष abcd
around the sun S such that the area of triangle csa में इस तरह से चक्कर लगाता है कि csa त्रिभुज का
1
is  the area of the ellipse. (See figure) With db क्षैत्रफल दीर्घवृत के क्षेत्रफल का एक-चौथाई है (यहाँ पर
4
as the semimajor axis, and ca as the semiminor ac लघु-अक्ष एवं bd दीर्घ-अक्ष है)। यदि ग्रह abc तथा
axis. If t1 is the time taken for planet to go over cda कक्षीय पथों के लिए क्रमशः t1 तथा t2 का समय
path abc and t2 for path taken over cda then : लेता है, तब :-

(A) t1 = 4t2 (A) t1 = 4t2


(B) t1 = 3t2 (B) t1 = 3t2
(C) t1 = t2 (C) t1 = t2
(D) t1 = 2t2 (D) t1 = 2t2
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
LTS - Page 6/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN
17. Which one of the following statements regarding 17. पृथ्वी के कृ त्रिम उपग्रहों के सम्बन्ध में कौनसा कथन असत्य
artificial satellite of the earth is incorrect :- है :-

(A) The orbital velocity depends on the mass (A) कक्षीय वेग उपग्रह के द्रव्यमान पर निर्भर करता
of the satellite है

(B) A minimum velocity of 8 km/sec is required (B) पृथ्वी के समीप कक्षा में घूमने के लिए उपग्रह का
by a satellite to orbit quite close to the earth न्यूनतम वेग 8 किमी/सैकण्ड होना चाहिये।
(C) The period of revolution is large if the (C) परिक्रमण काल का मान अधिक होगा यदि कक्षा की
radius of its orbit is large त्रिज्या अधिक है
(D) The height of a geostationary satellite is (D) भू-स्थायी उपग्रह की पृथ्वी सतह से ऊँ चाई
about 36000 km from earth 36000 किमी होती है।
18. Two wires of the same material and length but 18. समान पदार्थ व लम्बाई के परन्तु व्यास अनुपात 1 : 2 के
diameter in the ratio 1 : 2 are stretched by the दो तार समान बल से खींचे जाते हैं। दोनों तारों के लिए
same force. The ratio of potential energy per unit खिचने पर प्रति इकाई आयतन स्थितिज ऊर्जा का अनुपात
volume for the two wires when stretched will be : होगा :
(A) 1 : 1 (B) 2 : 1 (A) 1 : 1 (B) 2 : 1
(C) 4 : 1 (D) 16 : 1 (C) 4 : 1 (D) 16 : 1
19. The lower surface of a cube is fixed. On its 19. एक घन की नीचली सतह को स्थिर रखा गया है। इसकी
upper surface, force is applied at an angle of उपरी सतह पर, इसकी सतह से 30° के कोण पर एक बल
30° from  its surface. The change will be in its लगाया जाता है, तो इसमें परिवर्तन होगा?
(A) shape (A) आकृ ति
(B) size (B) आकार
(C) volume (C) आयतन
(D) both shape and size (D) आकार एवं आकृ ति दोनाें
20. When a large bubble rises from the bottom of a 20. जब वायु का एक बड़ा बुलबुला, झील की तली से इसकी
lake to the surface, its radius doubles. If सतह पर आता है तो इसकी त्रिज्या दो गुनी हो जाती है।
atomospheric pressure is equal to that of column वायुमण्डलीय दाब पानी के H ऊँ चाई के स्तम्भ के बराबर
of water height H, then the depth of lake is :– है। झील की गहराई है :–
(A) H (B) 2 H (C) 7 H (D) 8 H (A) H (B) 2 H (C) 7 H (D) 8 H
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 7/29
ALLEN
SECTION-II : (Maximum Marks: 20) खण्ड-II : (अधिकतम अंक: 20)
This section contains 10 questions Candidates have to इस खंड में 10 प्रश्न हैं। उम्मीदवारों को 10 में से किसी भी 5 प्रश्न का
attempt any 5 questions out of 10. If more than 5 प्रयास करना है। यदि 5 से अधिक प्रश्नों का प्रयास किया जाता है, तो
questions are attempted, then only first 5 attempted के वल पहले 5 प्रश्नों का मूल्यांकन किया जाएगा।

questions will be evaluated.


प्रत्येक प्रश्न का उत्तर संख्यात्मक मान (Numerical Value) है।

The answer to each question is an Integer Value Type प्रत्येक प्रश्न के लिए, सही पूर्णांक मान दर्ज करें (दशमलव संके तन में,
questions.
उत्तर को निकटतम पूर्णांक में गोल किया जाना चाहिए। )

For each question, enter the correct integer value (In प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्नलिखित अंकन योजना के
case of non-integer value, the answer should be अनुसार किया जाएगा:

rounded off to the nearest Integer).


पूर्ण अंक           :    +4 यदि सही उत्तर चुना गया है।

Answer to each question will be evaluated according to शून्य अंक         :    0 यदि कोई भी विकल्प नहीं चुना गया है।

the following marking scheme:


ऋणात्मक अंक  :    –1 यदि गलत विकल्प चुना गया है।
Full Marks          :   +4 If correct answer is selected.

Zero Marks        :   0 If none of the option is selected.

Negative Marks  :   –1 If wrong option is selected.


1. Two monochromatic light waves of amplitude 1. दो एक वर्णीय प्रकाश तरंगे जिनके आयाम 3A तथा 2A है,
3A and 2A interfering at a point have a phase किसी बिन्दु पर इस प्रकार अध्यारोपित होती है कि इनके
difference of 60°. The intensity at that point मध्य कलान्तर 60° है। इस बिन्दु की तीव्रता xA2 होगी तो
will be xA2 then, find the value of x? x का मान ज्ञात करो :-

2. In an interference pattern, at a point we observe 2. व्यतिकरण प्रतिरूप में, λ1 = 6000 Å के लिये किसी बिन्दु
the 16th order maximum for λ1 = 6000 Å. What पर 16th उच्चिष्ठ प्राप्त होता है। यदि प्रकाश स्रोत को
order will be visible here if the source is तरंगदैर्ध्य  λ2 = 4800 Å के स्रोत से बदल दिया जाये तो
replaced by light of wavelength λ2 = 4800 Å ? अब उसी बिन्दु पर कौनसा क्रम दिखाई देगा ?

3. d 3. d
In Young's double slit experiment = 10 4 −
यंग द्वि-स्लिट प्रयोग में = 10 4

  (d = स्लिटों के
D D
  (d = distance between slits, D = distance of बीच दूरी, D = स्लिट और स्क्रीन के बीच दूरी) परदे
screen from the slits). At a point P on the पर स्थित बिन्दु P पर परिणामी तीव्रता स्लिटों की
screen the resulting intensity is equal to the
अलग-अलग तीव्रता I 0 के बराबर है। तब के न्द्रीय
intensity due to individual slit I0. Then the
distance of point P from the central maximum उच्चिष्ठ से बिन्दु P की दूरी है - ( λ = 6000 Å)
is : (λ = 6000 Å) (in mm) (mm में)
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
LTS - Page 8/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN

4. A plane EM wave of frequency 30 MHz travels 4. 30 MHz आवृत्ति की एक समतल वैद्युत चुम्बकीय
in free space along the X-direction. the electric तरंग निर्वात् में X-दिशा के अनुदिश चलती है। स्थान
field component of the wave at a particular एवं समय के एक निश्चित बिन्दु पर तरंग का वैद्युत
point of space an time E = 6V/m along Y- क्षेत्र  घटक Y-दिशा के अनुदिश E = 6V/m है। इस
direction. its magnetic field component B at बिन्दु पर इसका चुम्बकीय क्षेत्र  n × 10 – 8 T है तो n
this point is n × 10–8 T, then value of n is :- का मान होगा :-

5. Two solid spheres of same metal but of mass M 5. समान धातु के दो ठोस गोलों का द्रव्यमान M
and 8M fall simultaneously on a viscous liquid तथा 8M है। ये एक साथ श्यान द्रव में गिरते हैं।
and their terminal velocities are v and nv the गोलें के सीमान्त वेग v तथा nv है तब, n का
value of n is मान है

6. A cubical block of wood 10 cm on a side floats 6. लकड़ी का एक घनाकार गुटका (प्रत्येक भुजा 10 cm)
at the interface between oil and water with its जल-तेल सम्पर्क सतह पर चित्रानुसार तैर रहा है। इसका
lower surface horizontal and 4 cm below the निचला तल क्षैतिज है व सम्पर्क सतह से 4 cm नीचे है।
interface. The density of oil is 0.6 gcm–3. The तेल का घनत्व 0.6 gcm–3  है तो लकड़ी के गुटके का
mass of block (in g) is :- द्रव्यमान होगा:-

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 9/29
ALLEN

7. A wooden block of volume 1000 cm3 is suspended 7. 1000 cm3 आयतन का लकड़ी का गुटका स्प्रिंग तुला से
from a spring balance. It weighs 12 N in air. It is लटका है। वायु में इसका भार 12 N है। यह जल में इस
suspended in water such that half of block remain प्रकार लटकाया जाता है कि आधा गुटका जल सतह के
in water the spring balance (in N) is :- नीचे रहे। स्प्रिंग तुला का पाठ्यांक होगा:-

8. Time period of a satellite of earth is 5 hr. If the 8. पृथ्वी के एक उपग्रह का आवर्त काल 5 घण्टे है।
separation between the earth and the satellite is पृथ्वी तथा उपग्रह के बीच की दूरी अपने पूर्व मान
increased to 4 times the previous value, the की 4 गुनी बढ़ जाये, तो नया आवर्त काल होता है
new time period will become (in hr) :- (hr में) :-

9. Two planets A and B have the same material 9. दो ग्रहों A एवं B का द्रव्यमान घनत्व समान है। यदि ग्रह A

density. If the radius of A is twice that of B, की त्रिज्या B की दोगुनी है तो पलायन वेग का अनुपात 
vA vA
then the ratio of the escape velocity   is :-  होगा:-
vB vB

10. A simple pendulum has a time period T1 when 10. एक सरल लोलक का पृथ्वी सतह पर आवर्त काल T1 है
on earth's surface, and T2  when taken at a तथा पृथ्वी सतह से 2R ऊँ चाई पर T2 है, जहाँ R पृथ्वी की
height 2R above the earth's surface where R is 1
त्रिज्या है। T1 / T2 का मान   है, तो x का मान ज्ञात
1 x
the radius of earth. The value of T1  / T2 is .
x
कीजिए।
Find the value of x. 

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


LTS - Page 10/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN
Topic : Haloalkane, Aryl Halide (Substitution and Elimination), Electrochemistry, Solution, Ores & Metallurgy
PART-2 : CHEMISTRY

SECTION-I : (Maximum Marks: 80) खण्ड-I : (अधिकतम अंक: 80)


This section contains 20 questions. Each question has इस खंड में 20 प्रश्न हैं। प्रत्येक प्रश्न में सही उत्तर के लिए 4 विकल्प हैं।
4 options for correct answer. Multiple-Choice बहुविकल्पीय प्रश्न (MCQs) के वल एक विकल्प सही है। प्रत्येक प्रश्न
Questions (MCQs) Only one option is correct. For के लिए, अंक निम्नानुसार दिए जाएंगे:

each question, marks will be awarded as follows:


पूर्ण अंक           :    +4 यदि सही उत्तर चुना गया है।

Full Marks          :   +4 If correct answer is selected.


शून्य अंक         :    0 यदि कोई भी विकल्प नहीं चुना गया है।

Zero Marks        :   0 If none of the option is selected.


ऋणात्मक अंक  :    –1 यदि गलत विकल्प चुना गया है।
Negative Marks  :   –1 If wrong option is selected.
1. When a certain conductivity cell was filled with 1. 25°C पर 0.1M KCl से भरे हुए चालकता सेल का प्रतिरोध 
0.1M KCl, it had a resistance of 85 Ω at 25°C. When 85Ω   हैं। वही सेल जब किसी अज्ञात विद्युत अपघट्य के
the same cell was filled with an aqueous solution of
0.052M जलीय विलयन से भरा जाता है तो उसका प्रतिरोध
0.052 M unknown electrolyte, the resistance was
96Ω. Calculate the molar conductivity of the 96Ω है। इस सान्द्रता पर अज्ञात विद्युत अपघट्य की मोलर
unknown electrolyte at this concentration. 
चालकता ज्ञात कीजिये। (दिया है : 0.1M KCl का विशिष्ट
(Given : Specific conductivity of 0.1M 
चालकत्व =  1.29 × 10–2 Ω–1 cm–1)
KCl = 1.29 × 10–2 Ω–1 cm–1)
(A) 120 Ω–1cm2 mol–1  (A) 120 Ω–1cm2 mol–1 
(B) 219.65 Ω–1cm2 mol–1  (B) 219.65 Ω–1cm2 mol–1 
(C) 200.35 Ω–1cm2 mol–1  (C) 200.35 Ω–1cm2 mol–1 
(D) None of these  (D) इनमें से कोई नहीं
2. The electrolysis of acetate solution produces 2. ऐसीटेट आयन के एक विलयन के वैद्युत-अपघटन पर
ethane according to reaction 
निम्नलिखित अभिक्रिया द्वारा ऐथेन प्राप्त होती है

    2CH3COO– —→ C2H6(g) + 2CO2(g) + 2e–

    2CH3COO– —→ C2H6(g) + 2CO2(g) + 2e–

The current efficiency of the process is 80%.


What volume of gases would be produced at प्रक्रम में धारा दक्षता 80% है। यदि 0.5 ऐम्पियर धारा को
27°C and 740 torr, if the current of 0.5 amp is विलयन में  96.5 मिनट तक प्रवाहित किया गया। 27°C
passed through the solution for 96.5 min ? तथा 740 टोर पर उत्पन्न गैसों का आयतन है  ?
(A) 6.0 L (B) 0.60 L (A) 6.0 L (B) 0.60 L
(C) 1.365 L (D) 0.91 L (C) 1.365 L (D) 0.91 L
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 11/29
ALLEN
3. Cause of sharp tooth pain is electric current 3. दाँतों के रिक्तियों में भरे गये मिश्रण में Al द्वारा धारा प्रवाहित
passes from Al the filling in cavity. A tiny होने पर तीव्र दर्द होता है, क्योकि एक न्यून सैल का निर्माण
galvanic cell is made in which Al oxidized at होता है जिसमें Al ऑक्सिकृ त होता (एनोड पर) तथा O2 ,
anode and O2 gas is reduced to H2O. Find the H2O में अपचयीत होती है। तो मरीज द्वारा महसूस किया
potential experienced by person. Given-
गया विभव ज्ञात कीजिए।

(E°Al/Al+3 = +1.66V, and E Oo 2 H 2 O = 1.23V) :-


/
(E°Al/Al+3 = +1.66V तथा E Oo 2 H 2 O  = 1.23V) :-
/

(A) –0.93 (A) –0.93


(B) –2.89 (B) –2.89
(C) +0.93 (C) +0.93
(D) 2.89V (D) 2.89V
4. A sample of sea water was found to contain 4. समुद्री जल का एक नमूना (sample), 9.5%w/w
9.5%w/w of MgCl2 and 5.85% w/w of NaCl. MgCl2 एवं 5.85% w/w NaCl से युक्त पाया जाता है।
Assuming complete ionisation of salts, what यदि इन लवणों का पूर्ण आयनन हो तो समुद्री जल के नमूने
will be the boiling point of sample.
का क्वथनांक क्या होगा ? (जल का Kb = 0.52, Mg का
(Kb for water = 0.52, Mg = 24, Na = 23,
परमाणु भार = 24, Na का परमाणु भार = 23, Cl का
Cl = 35.5):- परमाणु भार = 35.5)

(A) 101.5°C (A) 101.5°C


(B) 103.07°C (B) 103.07°C
(C) 100.52°C (C) 100.52°C
(D) 105.08°C (D) 105.08°C
5. At a given temperature, the vapour pressure of a 5. दिए गए ताप पर, दो वाष्पशील द्रवों A तथा B से युक्त विलयन
solution of two volatile liquids A and B is given का वाष्पदाब समीकरण PS = 120 – 80 XB (XB = B का
by the equation  PS  = 120 – 80XB  (XB  = mole
मोल भिन्नांश) द्वारा दिया गया है। समान ताप पर शुद्ध A तथा
fraction of B) Vapour pressure of pure A and B
at the same temperature are respectively :- B के वाष्पदाब क्रमशः होगें :-

(A) 120, 80 (A) 120, 80


(B) 120, 200 (B) 120, 200
(C) 120, 40 (C) 120, 40
(D) 80, 40 (D) 80, 40
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
LTS - Page 12/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN
6. A graph of osmotic pressure (p) vs molarity (M) 6. NaCl विलयन के परासरण दाब (p) तथा मोलरता (M) के
of aqueous solution of NaCl at room temperature मध्य आरेख नीचे दिया गया है। रेखा की प्रवणता प्रदर्शित
is given below. The slope of the line represents :- करती है :-

(A) Concentration (A) सान्द्रता


(B) Universal gas constant    (B) सार्वत्रिक गैस स्थिरांक
(C) RT (C) RT
(D) None of these (D) इनमें से कोई नहीं
7. In the aluminothermite process Al acts as :- 7. एलुमिनोथर्माइट विधि में Al किस तरह से व्यवहार करता है :-
(A) Oxidising agent (A) ऑक्सीकारक
(B) Flux (B) गालक
(C) Reducing agent (C) अपचायक
(D) Solder (D) सोल्डर
8. The slag obtained during the extraction of copper 8. काॅपर पाइराइट्स से काॅपर के निष्कर्षण में बनने वाले धातुमल
from copper pyrites is composed mainly of …….: का संगठन क्या होगा ?
(A) MgSiO3 (A) MgSiO3
(B) CuSiO3 (B) CuSiO3
(C) FeSiO3 (C) FeSiO3
(D) CuFeS2 (D) CuFeS2
9. Which of the following metals never occurs in 9. इनमें से कौन सी धातु प्रकृ ति में कभी भी स्वतंत्र अवस्था में
free state in nature ? संभव नहीं है ?
(A) Au (A) Au
(B) Cu (B) Cu
(C) Ag (C) Ag
(D) Na (D) Na
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 13/29
ALLEN
10. Which of the following ore is concentrated by 10. निम्न में से किस अयस्क का सांद्रण झाग प्लवन विधि से
froth floation process ? होता है?
(A) Calamine (A) कै लामाइन
(B) Malachite (B) मैलेकाइट
(C) Argentite (C) अर्जेण्टाइट
(D) Galena (D) गैलेना

11. CuFeS2 is usually called as:- 11. CuFeS2 को आमतौर पर कहा जाता है:-
(A) Pitch blend (A) पिच ब्लेण्ड
(B) Copper glance (B) काॅपर ग्लांस
(C) Copper Pyrite (C) काॅपर पाईराईट
(D) Cinnabar (D) सिनेबार
12. Which of the following match are incorrect:-
12. निम्न कू ट में कौनसे सही नहीं है :-

(a) Goldschmidt aluminothermite process-Cr2O3


(a) गोल्डस्मिट एल्यूमिनोतापीय प्रक्रम - Cr2O3

(b) Mac Arther cyanide process - Fe


(b) मेक आर्थर सायनाइड प्रक्रम - Fe

(c) Mond process - Ni


(c) मोन्ड प्रक्रम - Ni

(d) Van Arkel process – Au (d) वाॅन आर्के ल प्रक्रम – Au


(A) a, c (A) a, c
(B) c, d (B) c, d
(C) b, d (C) b, d
(D) a, b (D) a, b
13. Select correct matching :- 13. सही मिलान का चयन कीजिए :-
(A) Pyrometallurgy : Extraction of Fe (A) तापीयधातुकर्म : Fe का निष्कर्षण
(B) Electrometallurgy : Extraction of Al (B) वैद्युत धातुकर्म : Al का निष्कर्षण
(C) Hydrometallurgy : Extraction of Au (C) जलीय धातुकर्म : Au का निष्कर्षण
(D) All above are correct (D) उपरोक्त सभी
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
LTS - Page 14/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN

14.
14.

Final product formed in given sequence of उपर्युक्त अभिक्रिया अनुक्रम का अन्तिम उत्पाद
reaction is : होगा :

(A) H3C–O–CH3 (B) (A) H3C–O–CH3 (B)

(D) (C) (D)


(C)

15. Most reactive Alkyl halide towards E2 reaction 15. E2 अभिक्रिया के लिए सर्वाधिक क्रियाशील एल्किल
is : हैलाइड है :

(A) (B) (A) (B)

(C) (D) (C) (D)

16.
16.

Major product of this reaction is : दी गयी अभिक्रिया का मुख्य उत्पाद होगा :

(A) (A)

(B) (B)

(C) (C)

(D) (D)

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 15/29
ALLEN

17. Select an option having incorrect major 17. गलत मुख्य उत्पाद प्रदर्शित कर रही अभिक्रिया
product ? चुनिये ?
MeOH MeOH
(A) Me3C – Cl + MeONa −−−−→  Me3C – OMe (A) Me3C – Cl + MeONa −−−−→  Me3C – OMe

(B)  + Me2NH —→  (B)  + Me2NH —→ 

Δ Δ
(C)  −→  (C)  −→ 

Conc. H 2 SO4 Conc. H 2 SO4


(D)  −−−−−−−−→   (D)  −−−−−−−−→  
Catalytic Δ Catalytic Δ

18. The decreasing order of rate of reaction (SN2) 18. दिये गये यौगिकों के लिए (SN2) अभिक्रिया की दर का

for the following given compounds is :


घटता हुआ क्रम है :

     
     

(A) I > III > II (A) I > III > II


(B) I > II > III (B) I > II > III
(C) III > I > II (C) III > I > II
(D) III > II > I (D) III > II > I

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


LTS - Page 16/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN

HBr HBr
19.  −−→ Product(s)
19.  −−→ उत्पाद

Products is/are : उत्पाद हैं :

(A) (A)

(B)  +  (B)  + 

(C)  + enantiomers (C)  + प्रतिबिम्बरूपी समावयवी

(D) Both (A) and (C) (D) (A) तथा (C) दोनों

20. What is the final product of given reaction ?


20. निम्न अभिक्रिया का अंतिम उत्पाद है :

Na CH 3 CH 2 I Na CH 3 CH 2 I
CH3—C≡CH  −−→  −−−−−−→ product CH3—C≡CH  −−→  −−−−−−→ उत्पाद

(A) CH2 = CH—CH2CH3 (A) CH2 = CH—CH2CH3

(B) CH3—CH2—C≡C—CH2—CH3 (B) CH3—CH2—C≡C—CH2—CH3

(C) CH≡C—CH2—CH2CH3 (C) CH≡C—CH2—CH2CH3

(D) CH3—C≡C—CH2CH3 (D) CH3—C≡C—CH2CH3

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 17/29
ALLEN
SECTION-II : (Maximum Marks: 20) खण्ड-II : (अधिकतम अंक: 20)
This section contains 10 questions Candidates have to इस खंड में 10 प्रश्न हैं। उम्मीदवारों को 10 में से किसी भी 5 प्रश्न का
attempt any 5 questions out of 10. If more than 5 प्रयास करना है। यदि 5 से अधिक प्रश्नों का प्रयास किया जाता है, तो
questions are attempted, then only first 5 attempted के वल पहले 5 प्रश्नों का मूल्यांकन किया जाएगा।

questions will be evaluated.


प्रत्येक प्रश्न का उत्तर संख्यात्मक मान (Numerical Value) है।

The answer to each question is an Integer Value Type प्रत्येक प्रश्न के लिए, सही पूर्णांक मान दर्ज करें (दशमलव संके तन में,
questions.
उत्तर को निकटतम पूर्णांक में गोल किया जाना चाहिए। )

For each question, enter the correct integer value (In प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्नलिखित अंकन योजना के
case of non-integer value, the answer should be अनुसार किया जाएगा:

rounded off to the nearest Integer).


पूर्ण अंक           :    +4 यदि सही उत्तर चुना गया है।

Answer to each question will be evaluated according to शून्य अंक         :    0 यदि कोई भी विकल्प नहीं चुना गया है।

the following marking scheme:


ऋणात्मक अंक  :    –1 यदि गलत विकल्प चुना गया है।
Full Marks          :   +4 If correct answer is selected.

Zero Marks        :   0 If none of the option is selected.

Negative Marks  :   –1 If wrong option is selected.

1. A 250 mL sample of a 0.2 M Cr3+ is 1. 0.2 M Cr3+ के   250 ml प्रतिदर्श का वैद्युत अपघटन

electrolysed with a current of 96.5 amp; if the 96.5 A धारा के साथ किया जाता है, यदि Cr3+ आयन की
remaining concentration of Cr3+ ion is 0.1 M, शेष सान्द्रता 0.1 M हो तो वैद्युत अपघटन का समय

the duration (in sec.) of electrolysis is : (सेकण्ड में) अन्तराल होगा (Cr का परमाणु भार = 52)

(Atomic wt. of Cr = 52) Assume volume of जहाँ विद्युत अपघटन के दौरान विलयन का आयतन नियत

solution remains constant during electrolysis :- है :-

2. If 0.01 M solution of an electrolyte has a 2. यदि 0.4 cm–1 सेल नियतांक के सेल में एक वैद्युत
resistance of 40 ohms in a cell having a cell अपघट्य के 0.01 M विलयन का प्रतिरोध 40 ohms
constant of   0.4 cm–1 then its molar हो तो इसकी मोलर चालकता ohm–1 cm2 mol–1 में
conductivity in ohm–1 cm2 mol–1 will be होगी -

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


LTS - Page 18/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN
3. Determine molarity of a solution obtained by 3. 50 ml of a 0.26 M H2SO4  विलयन तथा 150 ml
mixing 50 ml of a 0.26 M H2SO4 solution with 0.48 M H2SO4  विलयन को मिलाने पर प्राप्त परिणामी
another 150 ml 0.48 M H2SO4  solution. Give विलयन की मोलरता ज्ञात करो। अपने उत्तर को सभी
your answer by adding all decimal digit untill दशमलव के बाद वाले अंको को जोड़कर लिखिए जब तक
you get the integer number. पूर्णाक ना प्राप्त हो।

4. Elevation in boiling point was 0.52 °C when 6 4. जब एक यौगिक X का 6 g, 100 g पानी में घोला गया
g of a compound X was dissolved in 100 g of तो क्वथनांक में उन्नयन 0.52 °C था। X का अणुभार है :
water. Molecular weight of X is :

(Kb = 5.2 K mol–1, 100 g H2O)


(Kb for water = 0.52 K mol–1)

5. Ag2S + KCN → [Ag(CN ) x ] − n



5. Ag2S + KCN → [Ag(CN ) x ]− n

Excess Excess

[Ag(CN)x]–n + Zn → [Zn(CN)y]–m
[Ag(CN)x]–n + Zn → [Zn(CN)y]–m

Find the sum of x and y. x तथा y का कु ल मान होगा

6. How many of the following minerals contain Mg?


6. इनमें से कितने खनिज Mg रखते हैं?

Magnetite, Carnallite, Epsom salt, Siderite, मैग्नेटाइट, कै र्नेलाइट, इप्सम लवण, सिडेराइट,
Dolomite डोलाेमाइट

7. In the metallurgy of iron a basic flux is added 7. आयरन के धातुकर्म में सिलिका अशुद्धियों को निकालने के
to remove silica impurities. What is the atomic लिए एक क्षारीय गालक मिलाते हैं। उस क्षारीय गालक में
number of s-block metal present in that flux ? उपस्थित s-खंड के धातु का परमाणु क्रमांक क्या होगा?
hv hv
8. R–2–chloropentane −
− →  Monochlorination takes 8. R–2–क्लोरोपेन्टेन −
− →  मोनोक्लोरीनीकरण होता है
Cl2 Cl2
place. The mixture of products formed is subjected निर्मित उत्पादो के मिश्रण का प्रभाजी आसवन किया गया
to fractional distillation. Find the value of x where तो x का मान ज्ञात कीजिये जहाँ x प्राप्त प्रभाजो की कु ल
x is the total number of fractions obtained : संख्या है ?
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 19/29
ALLEN
9. Identify number of substrate those can give SN1 9. निम्न में कितने क्रियाधार (substrate) SN1 तथा SN2 दोनों
and SN2 reaction both.
अभिक्रियाऐं दर्शाऐंगेः

10. The total number of alkenes possible by 10. ऐल्कोहाॅलिक KOH का प्रयोग करके

dehydrobromination of 3-bromo-3-cyclopentylhexane 3-ब्रोमो-3-साइक्लोपेन्टिलहेक्सेन के विहाइड्रोब्रोमीनीकरण

using alcoholic KOH (by E2 mechanism) is : (E2 क्रियाविधि द्वारा) द्वारा निर्मित हो सकने वाली ऐल्किनो
की कु ल संख्या है?

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


LTS - Page 20/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN
Topic : Complex Numbers, Principle of Mathematical Induction & Three Dimensional Geometry
PART-3 : MATHEMATICS

SECTION-I : (Maximum Marks: 80) खण्ड-I : (अधिकतम अंक: 80)


This section contains 20 questions. Each question has इस खंड में 20 प्रश्न हैं। प्रत्येक प्रश्न में सही उत्तर के लिए 4 विकल्प हैं।
4 options for correct answer. Multiple-Choice बहुविकल्पीय प्रश्न (MCQs) के वल एक विकल्प सही है। प्रत्येक प्रश्न
Questions (MCQs) Only one option is correct. For के लिए, अंक निम्नानुसार दिए जाएंगे:

each question, marks will be awarded as follows:


पूर्ण अंक           :    +4 यदि सही उत्तर चुना गया है।

Full Marks          :   +4 If correct answer is selected.


शून्य अंक         :    0 यदि कोई भी विकल्प नहीं चुना गया है।

Zero Marks        :   0 If none of the option is selected.


ऋणात्मक अंक  :    –1 यदि गलत विकल्प चुना गया है।
Negative Marks  :   –1 If wrong option is selected.
2 2
z−i+3 z−i+3
1. Locus of Arg ( )  = π is 1. Arg ( )  = π का बिन्दुपथ है।
z + 3i − 1 z + 3i − 1

(A) Circle (A) वृत


(B) Straight line (B) सरल रेखा
(C) Parabola (C) परवलय
(D) None (D) कोई नही
r2 r2
2. Locus of  z̄ = ā + ,  r > 0 is ? 2. z̄ = ā + ,  r > 0 का बिन्दु पथ होगा ?
z−a z−a
(A) |z − a| = r (A) |z − a| = r

(B) | z − a| = r 2 (B) | z − a| = r 2

(C) ∣
∣ z − a 2 ∣∣ = r (C) ∣
∣ z − a 2 ∣∣ = r

(D) | z − 2a| = 2r (D) | z − 2a| = 2r

3. Equation of the reflection of line and  3. रेखा ā z + az̄ = 0  का वास्तविक अक्ष के सापेक्ष
ā z + az̄ = 0 in the real axis is? प्रतिबिम्ब रेखा का समीकरण होगा ?
(A) ā z̄ + az = 0 (A) ā z̄ + az = 0

(B) ā z − a z̄ = 0 (B) ā z − a z̄ = 0

(C) ( a + ā ) (z + z̄ ) = 0 (C) ( a + ā ) (z + z̄ ) = 0

(D) ( z + ā ) (z + ā ) = 0 (D) ( z + ā ) (z + ā ) = 0
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 21/29
ALLEN
4. The Locus of |3Z – 2| + |3Z + 2| = 4 is? 4. |3Z – 2| + |3Z + 2| = 4 का बिन्दुपथ होगा?
(A) Parabola (A) परवलय
(B) Line segment (B) रेखाखण्ड
(C) Circle (C) वृत
(D) None Real Curve (D) काल्पनिक वक्र
3 5. 3
5. If z = , then locus of z is :- यदि  z =   हो तो z का बिन्दुपथ
2 + cos θ + i sin θ 2 + cos θ + i sin θ
होगा:-
(A) a straight line (A) सरल रेखा
(B) a circle having centre on x-axis (B) एक वृत्त जिसका के न्द्र x-अक्ष पर स्थित हो
(C) a circle having centre on y-axis (C) एक वृत्त जिसका के न्द्र y-अक्ष पर स्थित हाे
(D) a parabola (D) परवलय

6.  is equal to
6.  का मान होगा।

(where i = √−
−−
−1) (जहाँ i = √−
−−
−1 है।)

(A) 95 + 2i (A) 95 + 2i
(B) 95 + i (B) 95 + i
(C) 96 + i (C) 96 + i
(D) None (D) कोई नहीं
7. Let z1 = 6 + i and z2 = 4 – 3i. Let z be a complex 7. यदि z1 = 6 + i और z2 = 4 – 3i तथा z एक सम्मिश्र
z − z1 π z − z1 π
number such that arg ( )  = , then  z संख्या है जो कि कोणांक  ( )  =  को सन्तुष्ट
z2 − z 2 z2 − z 2
satisfies - करती है, तो -
(A) |z – (5 – i)| = 5 (A) |z – (5 – i)| = 5
– –
(B) |z – (5 – i)| = √5 (B) |z – (5 – i)| = √5
(C) |z – (5 + i)| = 5 (C) |z – (5 + i)| = 5
– –
(D) |z – (5 + i)| = √5 (D) |z – (5 + i)| = √5
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
LTS - Page 22/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN
7 7
8. If (x + iy) = a + ib then (y + ix) is equal to :- 8. यदि (x + iy)7 = a + ib हो तो (y + ix)7 बराबर होगा :-
(A) b + ia (B) b – ia (A) b + ia (B) b – ia 
(C) –b + ia (D) –b – ia (C) –b + ia (D) –b – ia
9. Locus of |z + z̄ | + |z − z̄ | = 2 is ? 9. |z + z̄ | + |z − z̄ | = 2  के बिन्दुपथ है ?
(A) Straight line (B) A Square (A) सरल रेखा (B) वर्ग
(C) Circle (D) Parabola (C) वृत्त (D) परवलय
10. If ω is complex cube root of unity whose 10. यदि ω इकाई का सम्मिश्र घनमूल जिसका काल्पनिक भाग
imaginary part is positive & |z – ω| = |z + ω|, धनात्मक है तथा |z – ω| = |z + ω| हो, तो arg(z)  हो
then arg(z) can be- सकता है .
π 5π π 5π
(A) 3
(B) (A) 3
(B)
6 6
π π π π
(C) 6
(D) 4
(C) 6
(D) 4
11. The distance of the point (1,–2,3) from the 11. बिन्दु (1, – 2,3) की समतल x – y+z – 5 = 0 से
plane x – y + z – 5 = 0 measured parallel to the x y z−1
रेखा   = =   के समान्तर मापी गई दूरी
x y z−1 2 3 −6
line  = =  is equal to  है
2 3 −6

(A) 1 (B) 2 (A) 1 (B) 2


(C) 3 (D) 4 (C) 3 (D) 4
12. 1 1 1
The distance of the point P(3,8,2) from the line  12. बिन्दु P(3,8,2) से रेखा (x − 1) = (y − 3) = (z − 2)
2 4 3
1 1 1
(x − 1) = (y − 3) = (z − 2)   measured
2 4 3  की समतल 3x + 2y – 2z + 15 = 0, के समान्तर मापी गई दूरी
parallel to the plane 3x + 2y – 2z + 15 = 0, is है।
(A) 6 (B) 7 (C) 5 (D) 8 (A) 6 (B) 7 (C) 5 (D) 8
y+3 y+3
13. The point on the line  x − 2 = =
z+5
13. रेखा  x−2
= =
z+5
  पर वह बिन्दु  जो
1 −2 −2 1 −2 −2

 at a distance of 6 from the point (2,–3,–5) is - बिन्दु (2,–3,–5) से 6 इकाई दूरी पर स्थित है, होगा :-
(A) (3,–5,–3) (B) (4,–7,–9) (A) (3,–5,–3) (B) (4,–7,–9)
(C) (0,2,–1) (D) (–3,–5,3) (C) (0,2,–1) (D) (–3,–5,3)

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 23/29
ALLEN
14. Equation of line passing through the point
14. रेखाओं  r ⃗ = (^i + ^j − k^) + λ(2^i − 2^j + k^)   एवं 
(2,–1,3) and perpendicular to lines 
r ⃗ = (2^i − ^j − 3k^) + μ(^i + 2^j + 2k^)   के   लम्बवत्
r i j ^
⃗ = (^ + ^ − ) + k λ(2 i^
− 2j
^
+ k)
^
 and

 r 2i j
⃗ = ( ^ − ^ − 3k^) + μ(^i + 2^j + 2k^)  is given by - तथा बिन्दु (2,–1,3) से गुजरने वाली रेखा का समीकरण है

(A) r ⃗ = (2^i − ^j + 3k^) + λ (2^i + ^j − 2k^) (A) r ⃗ = (2^i − ^j + 3k^) + λ (2^i + ^j − 2k^)

(B) r ⃗ = (2^i − ^j + 3k^) + λ (2^i − ^j + 2k^) (B) r ⃗ = (2^i − ^j + 3k^) + λ (2^i − ^j + 2k^)

(C) r ⃗ = (2^i − ^j + 3k^) + λ (^i + 2^j − 3k^) (C) r ⃗ = (2^i − ^j + 3k^) + λ (^i + 2^j − 3k^)

(D) r ⃗ = (2^i − ^j + 3k^) + λ (^i + ^j ) (D) r ⃗ = (2^i − ^j + 3k^) + λ (^i + ^j )

y y
15. The line  x − 1 = =
z+2
 cuts the plane 15. रेखा  x − 1 = =
z+2
 समतल x + y + z = 1
2 −1 2 2 −1 2
x + y + z = 1 at P. If the foot of the को बिन्दु P पर काटती है। यदि  P से किसी समतल पर डाले
perpendicular from P to a plane be (3,–4,1) गये लम्ब का पाद (3,–4,1) है, तब उस समतल का
then the equation of the plane is समीकरण है
(A) 3x – 2y – z = 0 (A) 3x – 2y – z = 0
(B) 2x – y + 2z = 12 (B) 2x – y + 2z = 12
(C) 2x – 10y + 5z = 51 (C) 2x – 10y + 5z = 51
(D) 3x + y – 2z = 0 (D) 3x + y – 2z = 0
16. ABC is a triangle and A = (2,3,5), B = (–1,3,2) and 16. ABC एक त्रिभुज है तथा A = (2,3,5), B = (–1,3,2)
C = (λ,5,μ). If the median through A is equally तथा C = (λ,5,μ). यदि A से गुजरने वाली माध्यिका अक्षों
inclined to the axes, then the value of λ and μ, is-  से बराबर झुकी हुई है, तब  λ तथा μ के मान है  
(A) 5,8 (A) 5,8
(B) 4,7 (B) 4,7
(C) 7,10 (C) 7,10
(D) 9,5 (D) 9,5

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


LTS - Page 24/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN
17. The shortest distance between the lines,
17. x−1 y−2 z−3
रेखाओ,  = =   तथा   
x−1 y−2 z−3 2 3 4
= =  and 
x−2 y−4 z−5
2 3 4 = =   के मध्य न्यूनतम दूरी
x−2 y−4 z−5 3 4 5
= =  is - होगी -
3 4 5
1 1 1 1 1 1 1 1
(A) (B) – (C) – (D) (A) (B) – (C) – (D)
6 √ 6 √ 3 3 6 √ 6 √ 3 3
18. The equation of the plane containing the 18. एक समतल का समीकरण जिसमें रेखा   
x+1 y−3 z+2 x+1 y−3 z+2
line  = =   and the point = =   तथा बिन्दु (0,7,–7)
3 2 1 3 2 1
(0,7,–7) is  निहित है 
(A) x + y + z = 2 (A) x + y + z = 2
(B) x + y + z = 3 (B) x + y + z = 3
(C) x + y + z = 0 (C) x + y + z = 0
(D) x + y + z = 1 (D) x + y + z = 1
19. The equation of the line passing through 19. समतल का समीकरण जो बिन्दु (1,2,3) से गुजरता है तथा
(1,2,3) and parallel to the planes x – y + 2z = 5 समतलो  x – y + 2z = 5 तथा 3x + y + z = 6 के
and 3x + y + z = 6 is समान्तर है,होगा
x−1 y−2 z−3 x−1 y−2 z−3
(A) = = (A) = =
−3 5 4 −3 5 4
x−1 y−2 z−1 x−1 y−2 z−1
(B) = = (B) = =
−3 −5 4 −3 −5 4
x−1 y−2 z−1 x−1 y−2 z−1
(C) = = (C) = =
−3 −5 −4 −3 −5 −4

(D) None  (D) कोई नहीं


20. A plane meets the co-ordinate axes in A,B,C 20. एक समतल निर्देशी  अक्षों को बिन्दुओं A,B,C पर इस
such that the centroid of the triangle is the प्रकार मिलता है कि त्रिभुज का के न्द्रक बिन्दु(1,r,r2), है तो
point (1,r,r2), the equation of the plane is - समतल का समीकरण है-
(A) x + ry + r2z = 3r2  (A) x + ry + r2z = 3r2 
(B) r2x + ry + z = 3r2  (B) r2x + ry + z = 3r2 
(C) x + ry + r2z = 3  (C) x + ry + r2z = 3 
(D) r2x + ry + z = 3  (D) r2x + ry + z = 3 
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008
E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 25/29
ALLEN
SECTION-II : (Maximum Marks: 20) खण्ड-II : (अधिकतम अंक: 20)
This section contains 10 questions Candidates have to इस खंड में 10 प्रश्न हैं। उम्मीदवारों को 10 में से किसी भी 5 प्रश्न का
attempt any 5 questions out of 10. If more than 5 प्रयास करना है। यदि 5 से अधिक प्रश्नों का प्रयास किया जाता है, तो
questions are attempted, then only first 5 attempted के वल पहले 5 प्रश्नों का मूल्यांकन किया जाएगा।

questions will be evaluated.


प्रत्येक प्रश्न का उत्तर संख्यात्मक मान (Numerical Value) है।

The answer to each question is an Integer Value Type प्रत्येक प्रश्न के लिए, सही पूर्णांक मान दर्ज करें (दशमलव संके तन में,
questions.
उत्तर को निकटतम पूर्णांक में गोल किया जाना चाहिए। )

For each question, enter the correct integer value (In प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्नलिखित अंकन योजना के
case of non-integer value, the answer should be अनुसार किया जाएगा:

rounded off to the nearest Integer).


पूर्ण अंक           :    +4 यदि सही उत्तर चुना गया है।

Answer to each question will be evaluated according to शून्य अंक         :    0 यदि कोई भी विकल्प नहीं चुना गया है।

the following marking scheme:


ऋणात्मक अंक  :    –1 यदि गलत विकल्प चुना गया है।
Full Marks          :   +4 If correct answer is selected.

Zero Marks        :   0 If none of the option is selected.

Negative Marks  :   –1 If wrong option is selected.


1. If | z 1 | = 2, |z 2 | = 3, | z 3 | = 4  and 1. यदि  | z 1 | = 2, | z 2 | = 3, |z 3 | = 4  तथा 
| 2z1 + 3z2 + 4z3 | = 9 , then value of | 2z1 + 3z2 + 4z3 | = 9   हो, तो 
|8z2 z3 + 27z3 z1 + 64z1 z2 |  is equal to:- |8z2 z3 + 27z3 z1 + 64z1 z2 |  बराबर है :-

2. Let w is non real cube root of unity then the


2. माना w इकाई का अवास्तविक घनमूल हो, तो

(3 + 5w + 3w2)2 + (3 + 3w + 5w2)2 is (3 + 5w + 3w2)2 + (3 + 3w + 5w2)2 होगा।


3. If z, –z and 1–z are the vertices of equilateral 3. यदि z, –z तथा 1–z किसी समबाहु त्रिभुज ABC के शीर्ष
triangle ABC then 8Re(z) is equal to ?  हो तो 8Re(z) बराबर होगा?
4. If z1  and z2  are two unimodular complex 4. यदि z1 तथा z2 इकाई मापाँक वाली दो सम्मिश्र संख्यायें है
numbers that satisfy z12  + z22  = 5,  then जो z12  + z22  = 5 को संतुष्ट करती है, तो 
( z1 − z̄ 1 )2 + (z2 − z̄ 2 )2  is equal to - ( z1 − z̄ 1 )2 + (z2 − z̄ 2 )2  का मान होगा -

5. Let z is a complex number satisfying z − 2 − 2i|


| ⩽ 1. 5. माना z एक सम्मिश्र संख्या इस तरह है कि z − 2 − 2i|
| ⩽ 1

The maximum value of |2iz + 4|  is  हो, तो 2iz + 4|  का अधिकतम मान होगा
|

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


LTS - Page 26/29 Space for Rough Work / रफ कार्य के लिए जगह E + H / 13112022
ALLEN
6. If ℓ ,m,n are the direction cosines of a line and 6. यदि ℓ ,m,n एक रेखा की  दिक्कोज्याऐ है तथा ℓ mn का
1 1
maximum value of ℓmn is   then find k.  अधिकतम मान     है तो k का मान होगा 
3√k −
3√−
k
7. If the distance between the planes 4x – 2y – 4z + 1 = 0 7. यदि दो समतलो 4x – 2y – 4z + 1 = 0 तथा
and 4x – 2y – 4z + d = 0 is 10 then sum of values of d 4x – 2y – 4z + d = 0 के मध्य दूरी 10 है तो d
is equal to  के मानों का योग होगा
8. The distance of the point (–1,–5,–10) from the point 8. यदि बिन्दु (–1,–5,–10) की रेखा  
x−2 y+1 z−2 x−2 y+1 z−2
of intersection of line  = =
 तथा समतल x – y + z = 5
3 4 12 3
=
4
=
12
 and plane x – y + z = 5 is λ then 2λ is equal to :-
के प्रतिच्छेद बिन्दु से दूरी λ है तो 2λ का मान होगा -
9. The shortest distance between the z-axis and 9. z-अक्ष तथा रेखा x + y + 2z – 3 = 0, 2x + 3y + 4z – 4 = 0
the line x + y + 2z – 3 = 0, 2x + 3y + 4z – 4 = 0
के मध्य लघुत्तम  दूरी होगी  
is equal to 
y−2 y−2
10. If the line  x − 4 = =
z−k
 lies in the 10. यदि रेखा   x − 4 = =
z−k
 समतल 

1 1 2 1 1 2
plane 2x – 4y + z = 7, then the value of k is 2x – 4y + z = 7, मे निहित है तो k का मान
equal to -  होगा 

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


E + H / 13112022 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 27/29
ALLEN

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


LTS - Page 28/29 E + H / 13112022
Space for Rough Work / रफ कार्य के लिए जगह

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210322008


E + H / 13112022 LTS - Page 29/29
Distance Learning Programmes
(Session-2022-23)
ALL INDIA TEST SERIES

ABOUT FEEDBACK SYSTEM


Dear Student,
We request you to provide feedback for the test series till you have appeared. Kindly answer the questions
provided on the reverse of paper with honesty and sincerely.
Although our test series questions are extremely well designed and are able to improve speed, accuracy &
developing examination temperament, yet we are always open to improvements.
If you have not prepared well for today's test and if you are not feeling good today, then do not blame test
series for it.
We strive to prepare you for all kinds of situations and facing variations in paper, as this can also happen in
Main exam. It is important for you to concentrate on your rank.
Go through the feedback form thoroughly and answer with complete loyalty. Darken your response (2, 1, 0) in
OMR sheet corresponding to :
Questions

1. How convenient it was for you to enroll in our Distance Learning Course through online mode?
[2] Very Convenient [1] Average [0] Difficult
2. How do you find location of Test Center ?
[2] Approachable from all part of city [1] Average Approachable [0] Difficult to reach
3. Test Timing :
[2] Comfortable [1] Average [0] Need to be change
4. Do you feel Test starts on time :
[2] Yes Always [1] Some time delayed [0] Always delay
5. The level of test paper [meet all the requirement of competitive examination]
[2] Good standard [1] Average [0] Below average
6. Number of mistake in test papers :
[2] Negligible [1] Are very less [0] Too High
7. Are you satisfied with result analysis ?
[2] Outstanding [1] Average [0] Below average
8. Do you feel our Test Series is able to improve speed, accuracy & developing examination temperament?
[2] Yes I feel [1] Partly [0] Not at all
9. Response from Allen on email / telephonically
[2] Always good and prompt [1] Some time delay [0] Not satisfactory
10. Response at test center
[2] Satisfactory [1] Partly Satisfactory [0] Not Good

You might also like