TCD 48 DC Link Low Voltage ( 120-150m/min) Application
Detection ● Speed CPU ○ DI180-420
[Meaning] [Actions to take]
When running is impossible because of DC link charge shortage.
1. Check GP connector in DPP-XXX PCB and VG connector in DPC-1XX PCB. [Diagram] 2. Measure the voltage between GX9 and GX17 in DPP-XXX PCB(Normally, it should be AC29V. Yet, voltage variation rate is permitted). 2 6 VA-15 VG-15 to ASIC P15 3. If an error occurs during E/L running, HIC5 1) Check regeneration initiation voltage(Verify if voltage between DCP GP-6 8
R24 R25 R26 R27
- 1 GET-E18 7 VA-16 VG-16 9 + IC1 R23 CH2 and CH3 in DPP-XXX PCB is 7.58). 2) Check DC link condenser(If it is time to replace, replace it). DCN GP-1 P7 N9 5. Measure power voltage(E/L will operate with 240V or more R4 R5 DPP-XXX DPC-1XX power voltage inputted into CP). 6. Verify if regenerative IGBT is in good status. RCRR c1vd 7. Replace DPP-XXX PCB. R0 R1 c1st RCRS c1vd to IGBT S0 EMI S1 FILTER c1st