Professional Documents
Culture Documents
ATN Project Onsite Operation Guide V1.0
ATN Project Onsite Operation Guide V1.0
Port-Mapping:
Interface
Device Type Port Name Interface Type Description Logical
Media
ATN910D GigabitEthernetbitEthernet0/2/0 FE|GE|10GE Optical Uplink1-west
Site Information (Ring): example 5766 will integration to existing ring. West neighbor 5012, East
neighbor 5685. BO drop picture on whatsup group.
Part1:Upload configuration file to new ATN.
PC Ethernet.
192.168.0.2
Step2: Connect Ethernet cable to ATN
3.2 Warning: The password is too simple, it should not contain forbidden words. The password
needs to be change it. Change now ? (Y/N): n <---don’t change the password.
3.3 input below command for enable SSH.
<HUAWEI>
sys
ssh user root service-type all
sftp server enable
sftp server default-directory cfcard:
commit
Winscp).
11
Ring(Owner:BO)
Information confirm:
Port mapping:
Device Type Port Name Interface Type Interface Media Description
ATN910D GigabitEthernetbitEthernet0/2/0 FE|GE|10GE Optical Uplink1-west
Site Information (Ring): example 5766 will integration to existing ring. West neighbor 5012, East
neighbor 5685.
BO request, Site engineer remove the loop on ODF, wait 5 minutes. Check with NOC If service
impact, rollback.
Rule: if the neighbor is Hauwei device. We should connect the fiber first on this port.
As example: the 5766 should connect the first fiber to Ge0/2/1, because the neighbor is
Huawei device.
BO send message on whats up, request Site engineer connect the fibre to new ATN.
display diagnostic-information
display health
display current-configuration
display version
display patch-information display cpu-usage
display memory-usage
display device
display clock
display bgp vpnv4 all peer
display alarm active
display alarm all
display interface brief
display ip routing-table vpn IPRAN
display ip routing-table statistic
display ospf peer brief
display arp all
ATN910C/D
device(cisco/Huawei)
Step6: After Both uplink is up, add it on NCE
Part3:Service migration