Professional Documents
Culture Documents
7485 Datasheet
7485 Datasheet
7485 Datasheet
June 1989
54LS85/DM54LS85/DM74LS85
4-Bit Magnitude Comparators
General Description
These 4-bit magnitude comparators perform comparison of have a high-level voltage applied to the A e B input. The
straight binary or BCD codes. Three fully-decoded decisions cascading path is implemented with only a two-gate-level
about two, 4-bit words (A, B) are made and are externally delay to reduce overall comparison times for long words.
available at three outputs. These devices are fully expand-
able to any number of bits without external gates. Words of Features
greater length may be compared by connecting compara- Y Typical power dissipation 52 mW
tors in cascade. The A l B, A k B, and A e B outputs of a Y Typical delay (4-bit words) 24 ns
www.DataSheet4U.com stage handling less-significant bits are connected to the cor- Y Alternate Military/Aerospace device (54LS85) is avail-
responding inputs of the next stage handling more-signifi-
able. Contact a National Semiconductor Sales Office/
cant bits. The stage handling the least-significant bits must
Distributor for specifications.
Connection Diagram
Dual-In-Line Package
TL/F/6379 – 1
Function Table
Comparing Cascading
Outputs
Inputs Inputs
A3, B3 A2, B2 A1, B1 A0, B0 AlB AkB AeB AlB AkB AeB
A3 l B3 X X X X X X H L L
A3 k B3 X X X X X X L H L
A3 e B3 A2 l B2 X X X X X H L L
A3 e B3 A2 k B2 X X X X X L H L
A3 e B3 A2 e B2 A1 l B1 X X X X H L L
A3 e B3 A2 e B2 A1 k B1 X X X X L H L
A3 e B3 A2 e B2 A1 e B1 A0 l B0 X X X H L L
A3 e B3 A2 e B2 A1 e B1 A0 k B0 X X X L H L
A3 e B3 A2 e B2 A1 e B1 A0 e B0 H L L H L L
A3 e B3 A2 e B2 A1 e B1 A0 e B0 L H L L H L
A3 e B3 A2 e B2 A1 e B1 A0 e B0 L L H L L H
A3 e B3 A2 e B2 A1 e B1 A0 e B0 X X H L L H
A3 e B3 A2 e B2 A1 e B1 A0 e B0 H H L L L L
A3 e B3 A2 e B2 A1 e B1 A0 e B0 L L L H H L
H e High Level, L e Low Level, X e Don’t Care
Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted)
Typ
Symbol Parameter Conditions Min Max Units
(Note 1)
VI Input Clamp Voltage VCC e Min, II e b18 mA b 1.5 V
VOH High Level Output VCC e Min, IOH e Max DM54 2.5 3.4
V
Voltage VIL e Max, VIH e Min
DM74 2.7 3.4
VOL Low Level Output VCC e Min, IOL e Max DM54 0.25 0.4
Voltage VIL e Max, VIH e Min DM74 0.35 0.5 V
IOL e 4 mA, VCC e Min DM74 0.25 0.4
II Input Current @ Max VCC e Max AkB 0.1
Input Voltage VI e 7V
AlB 0.1 mA
Others 0.3
IIH High Level Input VCC e Max AkB 20
Current VI e 2.7V
AlB 20 mA
Others 60
IIL Low Level Input VCC e Max AkB b 0.4
Current VI e 0.4V AlB b 0.4 mA
Others b 1.2
2
Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load)
RL e 2 kX
From To Number of
Symbol Parameter Input Output Gate Levels CL e 15 pF CL e 50 pF Units
Min Max Min Max
tPLH Propagation Delay Time Any A or B A k B,
3 36 42
Low-to-High Level Output Data Input AlB ns
AeB 4 40 40
tPHL Propagation Delay Time Any A or B A k B,
3 30 40
High-to-Low Level Output Data Input AlB ns
AeB 4 30 40
tPLH Propagation Delay Time AkB
AlB 1 22 26 ns
Low-to-High Level Output or A e B
www.DataSheet4U.com tPHL Propagation Delay Time AkB
AlB 1 17 26 ns
High-to-Low Level Output or A e B
tPLH Propagation Delay Time
A eB AeB 2 20 25 ns
Low-to-High Level Output
tPHL Propagation Delay Time
AeB AeB 2 17 26 ns
High-to-Low Level Output
tPLH Propagation Delay Time AlB
AkB 1 22 26 ns
Low-to-High Level Output or A e B
tPHL Propagation Delay Time AlB
AkB 1 17 26 ns
High-to-Low Level Output or A e B
3
Logic Diagram
www.DataSheet4U.com
TL/F/6379 – 2
4
www.DataSheet4U.com
5
Physical Dimensions inches (millimeters)
www.DataSheet4U.com
6
Physical Dimensions inches (millimeters) (Continued)
www.DataSheet4U.com
7
54LS85/DM54LS85/DM74LS85 4-Bit Magnitude Comparators
Physical Dimensions inches (millimeters) (Continued)
www.DataSheet4U.com
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.