Professional Documents
Culture Documents
Cemax 486
Cemax 486
The main advantages of Cemax 486 are its ability to Addition Rate
increase both grinding efficiency and cement strength as
shown below: Cemax 486 is used at recommended standard dosage
rate by weight of cement. Individual dosage may vary due
Reduced cement agglomeration and balls and liners to different type of clinker and clinker replacement, type of
coating for better grinding efficiency.
mill and desired cement performance. The recommended
Increase in cement early and late strength by up 15% dosage is 0.03-0.07% by weight of cement.
Increase in cement mill output by more than 10% at
Dispensing
the same cement fineness.
Increased cement flowability and reduced pack set Cemax 486 quality enhancer is added to the clinker using
of cements. a metered dispensing system at the material conveyer.
Fosroc representatives will advise the best location for the
Technical Data dispensing system. No water addition is necessary.
Fosroc representatives can advise on suitable equipment
Product specifications for Cemax 486 are as per the for installation, covering manual, semi-automatic, fully
following table: automatic and computerised systems.
Appearance Light Yellow liquid
Shelf Life 12 months Storage
0
Specific gravity 1.054– 1.074 @ T 25 ± 2 C CEMAX 675 has a shelf life of 12 months provided the
0
pH 10.50 – 11.50 @ T 25 ± 2 C temperature is kept within the range of 20 - 35°C in its
original packaging.
Compatibility
Packaging
Cemax 486 is suitable for use with all types of Portland
cement and cement replacement materials e.g. GGBS,
Cemax 486 is supplied in 210 or 1000 litre tanks or by
tanker delivery. It contains no flammable materials.
P age |1
CEMAX 675
constructive solutions
Technical Services
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the
PT.FOSROC Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that any advice,
recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct or continuous control
Indonesia over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its products, whether or
not in accordance with any advice, specification, recommendation of information given by it.
Jl.Akasia II Blok A8 No.1
Delta Silicon Industrial Park telephone: fax: email:
Lippo Cikarang +62 21 897 2103-06 +62 21 897 2107 Indonesia@Fosroc.com
Bekasi 17550 +62 21 89907783
Indonesia
www.fosroc.com
P age |2