Professional Documents
Culture Documents
TLC 59025
TLC 59025
www.ti.com TLC59025
SLVS934C – JUNE 2009 – REVISED FEBRUARY 2021
SLVS934C – JUNE 2009 – REVISED FEBRUARY 2021
1 Features 3 Description
• 16 constant current output channels The TLC59025 device is designed for LED displays
• Matches industry standard IOUT to external and LED lighting applications. The TLC59025
resistor ratio contains a 16-bit shift register and data latches, which
• Constant output current invariant to load voltage convert serial input data into parallel output format. At
change the TLC59025 output stage, 16 regulated-current
• Output current accuracy: ports provide uniform and constant current for driving
LEDs within a wide range of VF variations. Used in
– Between channels: < ±5% (maximum)
system design for LED display applications (for
– Between ICs: < ±6% (maximum) example, LED panels), the TLC59025 provides great
• Constant output current range: flexibility and device performance. Users can adjust
3 mA to 45 mA the output current from 3 mA to 45 mA through an
• Output current adjusted by external resistor external resistor, Rext, which gives flexibility in
• Fast response of output current, OE (minimum): controlling the light intensity of LEDs. TLC59025 is
100 ns designed for up to 17 V at the output port. The high
• 30-MHz clock frequency clock frequency, 30 MHz, also satisfies the system
• Schmitt-trigger inputs requirements of high-volume data transmission.
• 3.0-V to 5.5-V supply voltage The serial data is transferred into TLC59025 through
• Thermal shutdown for overtemperature protection SDI, shifted in the shift register, and transferred out
• ESD performance: 1-kV HBM through SDO. LE can latch the serial data in the shift
register to the output latch. OE enables the output
2 Applications drivers to sink current.
• Gaming machine / entertainment Device Information (1)
• General LED applications PART NUMBER PACKAGE BODY SIZE (NOM)
• LED display systems TLC59025 SSOP (24) 8.65 mm × 3.90 mm
• Signs LED lighting
• White goods (1) For all available packages, see the orderable addendum at
the end of the data sheet.
40
30
IOUT – mA
20
10
0
0 500 1000 1500 2000 2500 3000 3500 4000
Rext – P
W
An©IMPORTANT
Copyright NOTICEIncorporated
2021 Texas Instruments at the end of this data sheet addresses availability, warranty, changes, use in safety-critical
Submit Document applications,
Feedback 1
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: TLC59025
TLC59025
SLVS934C – JUNE 2009 – REVISED FEBRUARY 2021 www.ti.com
Table of Contents
1 Features............................................................................1 8.1 Overview................................................................... 13
2 Applications..................................................................... 1 8.2 Functional Block Diagram......................................... 13
3 Description.......................................................................1 8.3 Feature Description...................................................13
4 Revision History.............................................................. 2 8.4 Device Functional Modes..........................................13
5 Pin Configuration and Functions...................................3 9 Application and Implementation.................................. 14
6 Specifications.................................................................. 4 9.1 Application Information............................................. 14
6.1 Absolute Maximum Ratings........................................ 4 9.2 Typical Application.................................................... 15
6.2 ESD Ratings............................................................... 4 10 Power Supply Recommendations..............................16
6.3 Recommended Operating Conditions.........................4 11 Layout........................................................................... 16
6.4 Thermal Information....................................................5 11.1 Layout Guidelines................................................... 16
6.5 Electrical Characteristics for 3-V Input Voltage...........5 11.2 Layout Example...................................................... 16
6.6 Electrical Characteristics for 5.5-V Input Voltage........6 12 Device and Documentation Support..........................17
6.7 Power Dissipation Ratings.......................................... 6 12.1 Support Resources................................................. 17
6.8 Timing Requirements.................................................. 7 12.2 Trademarks............................................................. 17
6.9 Switching Characteristics for 3-V Input Voltage.......... 8 12.3 Electrostatic Discharge Caution..............................17
6.10 Switching Characteristics for 5.5-V Input Voltage..... 9 12.4 Glossary..................................................................17
6.11 Typical Characteristics............................................ 10 13 Mechanical, Packaging, and Orderable
7 Parameter Measurement Information.......................... 11 Information.................................................................... 17
8 Detailed Description......................................................13
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision B (February 2015) to Revision C (February 2021) Page
• Updated the numbering format for tables, figures and cross-references throughout the document ..................1
• Updated "TJ" to "TA" in Electrical Characteristics for 3-V Input Voltage table.....................................................5
• Updated "TJ" to "TA" in Electrical Characteristics for 5.5-V Input Voltage table..................................................6
• Added note to Constant Current section...........................................................................................................13
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
MIN MAX UNIT
VDD Supply voltage 0 7 V
VI Input voltage –0.4 VDD + 0.4 V
VO Output voltage –0.5 20 V
IOUT Output current 45 mA
IGND GND terminal current 750 mA
TJ Operating virtual-junction temperature –40 150 °C
Tstg Storage temperature –55 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under
Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability.
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. Pins listed as
±1000 V may actually have higher performance.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Pins listed as ±500
V may actually have higher performance.
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
CLK
OE 1
LE 0
SDI
off
OUT0
on
off
OUT1
on
off
OUT2
on
off
OUT3
on
off
OUT15
on
(1) If the devices are connected in cascade and tr or tf is large, it may be critical to achieve the timing required for data transfer between
two cascaded devices.
(1) If the devices are connected in cascade and tr or tf is large, it may be critical to achieve the timing required for data transfer between
two cascaded devices.
IDD
VDD
IOUT
OE OUT0
IIH, IIL
CLK
LE
OUT15
SDI
VIH, VIL
R-EXT GND SDO
Iref
IDD
IOUT
VIH, VIL VDD
OUT0
OE
Function CLK
Generator LE OUT15
RL
SDI CL
SDO
Logic input R-EXT GND
waveform
Iref CL VL
VIH = VDD
VIL = 0V
tw(CLK)
tsu(D) th(D)
tPLH4, tPHL4
SDO 50%
tw(L)
50%
LE
th(L) tsu(L)
LOW
OE
tPLH2, tPHL2
OE Low
Output off
OUTn
50%
tw(OE)
HIGH
OE 50% 50%
OE Pulsed
tPHL3 tPLH3
Output off
90% 90%
OUTn 50% 50%
10% 10%
tof tor
8 Detailed Description
8.1 Overview
The TLC59025 is a 16-channel LED driver designed for LED displays and LED lighting applications. The
TLC59025 contains a 16-bit shift register and data latches, which convert serial input data into parallel output
format. At the TLC59025 output stage, 16 regulated-current ports provide uniform and constant current for
driving LEDs within a wide range of VF variations. Used in system design for LED display applications (for
example, LED panels), the TLC59025 provides great flexibility and device performance. Users can adjust the
output current from 3 mA to 45 mA through an external resistor, REXT, which gives flexibility in controlling the
light intensity of LEDs. TLC59025 is designed for up to 17 V at the output port. The high clock frequency, 30
MHz, also satisfies the system requirements of high-volume data transmission.
8.2 Functional Block Diagram
OUT0 OUT1 OUT14 OUT15
VDD
8
OE OUTPUT DRIVER
CONTROL
LOGIC
16
16
LE 16-BIT OUTPUT
LATCH
CONFIGURATION
LATCHES
16
CLK
16
Note
When the TLC59025 is used in very low current applications, reduced current accuracy can be
expected. For example, current accuracy is estimated to degrade to as much as ±10% when Iout =
1.7 mA.
8.4 Device Functional Modes
Table 8-1 lists the functional modes for the TLC59025.
Table 8-1. Truth Table in Normal Operation
CLK LE OE SDI OUT0... OUT15... OUT15 SDO
↑ H L Dn Dn...Dn – 7...Dn – 15 Dn – 15
↑ L L Dn + 1 No change Dn – 14
↑ H L Dn + 2 Dn + 2...Dn – 5...Dn – 13 Dn – 13
↓ X L Dn + 3 Dn + 2...Dn – 5...Dn – 13 Dn – 13
↓ X H Dn + 3 off Dn – 13
OE 1
LE 0
SDI
off
OUT0
on
off
OUT1
on
off
OUT2
on
off
OUT3
on
off
OUT15
on
30
IOUT – mA
20
10
0
0 500 1000 1500 2000 2500 3000 3500 4000
Rext – P
W
Figure 9-3. Default Relationship Curve Between IOUT,target and Rext After Power Up
12.4 Glossary
TI Glossary This glossary lists and explains terms, acronyms, and definitions.
www.ti.com 15-Jan-2021
PACKAGING INFORMATION
Orderable Device Status Package Type Package Pins Package Eco Plan Lead finish/ MSL Peak Temp Op Temp (°C) Device Marking Samples
(1) Drawing Qty (2) Ball material (3) (4/5)
(6)
TLC59025IDBQR ACTIVE SSOP DBQ 24 2500 RoHS & Green NIPDAU Level-2-260C-1 YEAR -40 to 125 TLC59025I
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com 3-Jun-2022
B0 W
Reel
Diameter
Cavity A0
A0 Dimension designed to accommodate the component width
B0 Dimension designed to accommodate the component length
K0 Dimension designed to accommodate the component thickness
W Overall width of the carrier tape
P1 Pitch between successive cavity centers
Sprocket Holes
Q1 Q2 Q1 Q2
Pocket Quadrants
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com 3-Jun-2022
Width (mm)
H
W
Pack Materials-Page 2
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, regulatory or other requirements.
These resources are subject to change without notice. TI grants you permission to use these resources only for development of an
application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license
is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you
will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these
resources.
TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with
such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for
TI products.
TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2022, Texas Instruments Incorporated