Professional Documents
Culture Documents
Gujarat Technological University
Gujarat Technological University
Gujarat Technological University
___________
MARKS
Q.1 (a) Just sketch a typical layout for an Airport showing all the components. 03
(b) Explain with sketch working of ‘Graving Dock’. 04
(c) Compute the corrected runway length for: Runway length at sea-level, std. 07
atmospheric pressure, temperature and zero gradient = 1455 m, Site elevation
= 50 m from MSL, ART = 20o C, effective gradient = 0.6 %
1
(c) Draw the Type-I Wind-rose diagram from the given data and suggest 07
the direction for the runway orientation
Direction %
N 4.5
NNE 7.5
NE 8
ENE 5
E 3
ESE 1.5
SE 3
SSE 2.5
S 4.5
SSW 11
SW 13.5
WSW 9
W 7.5
WNW 7
NW 4.5
NNW 4
OR
Q.3 (a) Briefly explain with sketch ‘Dipper dredger’. 03
(b) Briefly explain with sketch: ‘Minimum Turning Radius’ of an aircraft 04
(c) Determine the (i) Radius of central curve, (ii) Length of entrance curve, 07
(iii) Stopping distance, for the Exit Taxiway joining a runway and a
parallel main taxiway. Take turn off speed of an aircraft is 85 kmph,
coefficient of friction between tire and pavement is f = 0.13, coefficient
C = 0.39, and deceleration rate = 1 m/sec2
2
(c) Draw the Type-I Wind-rose diagram from the given data and suggest 07
the direction for the runway orientation
Direction %
N 4
NNE 6
NE 9
ENE 3
E 1
ESE 2
SE 2
SSE 1
S 7
SSW 12
SW 15
WSW 10
W 6
WNW 5
NW 6
NNW 3
OR
Q.5 (a) What do you mean by Wharf wall 03
(b) Explain buoys and beacons. 04
(c) If length of design vessel is 200 m and beam is 30 m, determine 07
following as per the IS provisions: (i) Stopping distance in the entrance
channel when vessel is fully loaded, (ii) Bottom width of 2 lane
channel, (iii) Diameter of Turning basin without tug assistance.
***********