This document provides a question bank for the End Sem examination in Engineering Chemistry (2019 Pattern) covering Units 3-6 on various topics:
- Unit 3 includes questions on engineering materials like polymers, composites, biodegradable polymers and nanomaterials.
- Unit 4 covers fuels and includes questions on calorific value determination, fuel analysis and refining, power alcohol, biodiesel and fuel production.
- Unit 5 focuses on spectroscopic techniques like UV-Vis, IR spectroscopy and includes questions on instrumentation, applications and concepts.
- Unit 6 is on corrosion science and includes questions on dry corrosion mechanisms, wet corrosion mechanisms, factors affecting corrosion, corrosion protection methods and surface coatings.
Original Description:
Original Title
Chemistry End Sem Question bank (Unit3-6) A.Y 21-22
This document provides a question bank for the End Sem examination in Engineering Chemistry (2019 Pattern) covering Units 3-6 on various topics:
- Unit 3 includes questions on engineering materials like polymers, composites, biodegradable polymers and nanomaterials.
- Unit 4 covers fuels and includes questions on calorific value determination, fuel analysis and refining, power alcohol, biodiesel and fuel production.
- Unit 5 focuses on spectroscopic techniques like UV-Vis, IR spectroscopy and includes questions on instrumentation, applications and concepts.
- Unit 6 is on corrosion science and includes questions on dry corrosion mechanisms, wet corrosion mechanisms, factors affecting corrosion, corrosion protection methods and surface coatings.
This document provides a question bank for the End Sem examination in Engineering Chemistry (2019 Pattern) covering Units 3-6 on various topics:
- Unit 3 includes questions on engineering materials like polymers, composites, biodegradable polymers and nanomaterials.
- Unit 4 covers fuels and includes questions on calorific value determination, fuel analysis and refining, power alcohol, biodiesel and fuel production.
- Unit 5 focuses on spectroscopic techniques like UV-Vis, IR spectroscopy and includes questions on instrumentation, applications and concepts.
- Unit 6 is on corrosion science and includes questions on dry corrosion mechanisms, wet corrosion mechanisms, factors affecting corrosion, corrosion protection methods and surface coatings.
No. Unit 3-Engineering Materials (Que.pattern -7M,6M,5M) (18M) 1 What is the structural requirement for a polymer to show conductive property? 7M Give structure, doping, properties and applications of polyacetylene (Structural requirement -2M,Structure-1M, Doping -2M,Properties -1M, Application-1M 2 Give the structure, properties and applications of Polycarbonate.(Structure-1M, 3M Properties -1M, Application-1M) 3 Give the structure, properties and applications of Polyphenylenevinylene 3M (PPV).(Structure-1M, Properties -1M, Application-1M) 4 Classify the composites on the basis of reinforcement. Give any three 7M properties and application of polymer composites.(Classify-1M, Properties - 3M, Application-3M) What is the role of matrix phase and dispersed phase in composites? Give advantages /application of composites?(Role -3M, Advantages -2M) 5M 5 What is biodegradable polymer? Give the structure of PHBV with its 3M applications.(Defn-1M, Structure -1M, Application -1M) What is biodegradable polymer. Explain the favorable condition for biodegradation .Give any two application of biodegradable polymer (Defn-1M, 5M Condition 2M, Application -2M) 6 How nanomaterial are classified on the basis of dimensions. Give its 3M applications.(Classification -2M,Applications-1M) 7 What are carbon nano tubes? Discuss the different types of carbon nanotubes 7M with respect to their structure. Give any three applications of it.(Defn-1M,Types with diagram-3M, Applications-3M). 8 Explain the structure of graphene with the help of a diagram. Give its 5M applications. (Structure with diagram-2M, Application-3M) 9 What are quantum dots? Give its properties and applications. .(Defn- 3M 1M,Properties-1M, Applications-1M). Unit 4-Fuels(Que pattern -7M,5M,5M). (17M) 1 Define – Gross and net calorific value and justify the relationship between 3M GCV and NCV of the fuel.(Each Defn-1M, Relationship-1M) 2 Draw neat labeled diagram of Bomb calorimeter. Give the formula to calculate 5M GCV with and without corrections. (Diagram -2M, Formula -3M) 3 How calorific value of gaseous fuel is determines by using Boy’s calorimeter. 5M (Diagram -2M, Construction -2M,formula-1M) 4 What is proximate analysis? Explain the procedure for determination of analysis 5M of each constituents with formula (Defn-1M,1M- each four constituent with formula) 5 Explain in brief the process with diagram for distillation of crude petroleum. 5M Give composition, boiling range and uses of two fractions obtained. (construction, Diagram -3M, composition, boiling range, Uses-2M (any 2fraction ) Give composition, boiling range and uses of any 3 fractions obtained in refining 3M of crude petrolum(composition, boiling range, Uses-1M each (any 3fraction 6 What is power alcohol? Give any 3 merits and demerits of power 5M alcohol.(Defn-1M, merits-2M,demerits-2M) 7 Write chemical reactions for production of Biodiesel and give its advantages. 3M (Rection-1M, Advantages-2M) 8 What is ultimate analysis? Give the significance of each constituent.(Defn-1M, 3M Significanec-2M 9 Explain the production of H2 by steam reforming of methane and coke with 5M reaction condition .(3M- Production , 2M-Coke reaction) 10 Numericals on Bomb calorimeter, Boy’s calorimeter, ultimate analysis, 4M proximate analysis. Unit 5 Spectroscopic Techniques (Que.pattern -7M,6M,5M) (18M) 1 Give the instrumentation of UV visible spectrophotometer with block diagram. 5M (Instrumentation -3M, FDiagram-2M). 2 Explain Different type of electronic transition that occurs in an organic 6M molecule after absorbing UV radiations.(any 4- electronic transition- 4M,diagram – 2M) 3 What are the applications of UV spectroscopy.(Any 3 application-1M each) 3M 4 Define the following terms with examples 3M (i)Bathochromic shift (ii) Hypsochromic shift (iii) Auxochrome (iv) Chromophore (v) Hyperchromic effect (vi) Hypochromic effect (Defn-1/2M and example -1/2 M each terms, ) 5 What are the conditions of absorption of IR radiations by the molecule? 6 Give principle of IR spectroscopy. Explain modes of vibrations with stretching 7M and bending vibrations.( principle-2M, stretching -2M ,bending vibrations-3M) 7 Draw a block diagram of IR spectrophotometer. Explain the components of IR 5M spectrophotometer with their functions.(Diagram-2M, Componets-2M, fuction-1M) 8 Explain any five applications of IR spectroscopy.(1M each ) 5M
Unit 6-Corrosion Science (Que pattern -7M,5M,5M). (17M)
1 What is dry corrosion? Explain the mechanism of oxidation corrosion with 3M diagram.(Defn-1M, Mech.-2M) 3M Define oxidation corrosion. Explain the mechanism of oxidation corrosion with diagram. .(Defn-1M, Mech.-2M) 2 Define corrosion . State the condition under which wet corrosion occur. Explain 5M hydrogen evolution mechanism of wet corrosion with diagram and reactions..(Defn-1M, condition-1M,Mech.with diagram ,reaction -3M) 3 Explain oxygen absorption mechanism of wet corrosion with diagram and 3M reactions.(Mech-1M, dia.-1M reaction -1M) 4 Explain various factors affecting corrosion on the basis of nature of metal.(1M 5M each) 5 Explain various factors affecting corrosion on the basis of nature of an 5M environment. (1M each) 6 What is Pilling-Bedworth ratio? Give four types of oxide films formed on 5M surface of metal with suitable example.(Defn-1M, Four types- 1M each with example) 7 What is principle of cathodic protection and explain sacrificial anode and 4M impressed current method.(Principle-1M, Process -3M) 8 Difference between anodic and cathodic coating?(Difference -1M each) 3M 9 Define electroplating. Explain electroplating process with neat labeled 5M diagram and applications. (Defn-1M, Process, rection ,diagram -3M, application-1M) 10 Explain the metal cladding method of applying metallic coating on base metal 3M (Diagram -1M, construction -2M) 11 Explain the cementation method of applying metallic coating on base metal. 3M (Diagram -1M, construction -2M) 12 Difference between galvanizing and tinning. (any 4 difference -1M each) 4M
------------------------------All the Best-----------------------------------------------------------------