PLATE 1 Hydraulics

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

Western Mindanao State University

College of Engineering
Civil Engineering Department
Normal Road, Baliwasan, Zamboanga City

CE 159
HYDRAULICS SYSTEM DESIGN
PLATE NO.3
SPRINKLER SYSTEM FOR THE COLLEGE OF
ENGINEERING 3-STOREY BUILDING, WESTERN
MINDANAO STATE UNIVERSITY

SUBMITTED TO:

ENGR. HENRY H. SIMYUNN

SUBMITTED BY:

MARRIAN ALAMAG
Design parameters:

· Use existing overhead tank at the back as reservoir or source

· You may specify Wet or Dry sprinkler system

· Use G.I. pipes. Indicate the pipe diameters.

· Show plumbing layout of the sprinkler system per floor with location of sprinkler heads
clearly shown

· Prepare the Bill of Materials and Estimated Cost

· If you don’t have the exact dimensions of the rooms or the building itself, use approximate
distances and heights.

SPRINKLER SYSTEM LAYOUT


Wet Fire Sprinkler system used in which water is constantly maintained within the sprinkler piping.
When a sprinkler activates the water is immediately discharged unto the fire. Sprinkler distance
from the walls approximately 2 meters and sprinkler distance from the other sprinkler is
approximately 4 meters.

Ground floor

Second floor
Third floor

Isometric view
 Ground floor to second floor measures = 5 meters
 Second floor to third floor measures = 4 meters
 Third floor to roof ceiling = 4 meters

Bill of Materials:

You might also like