Professional Documents
Culture Documents
Theta Catalog 2014 PMI Illuminazione Led
Theta Catalog 2014 PMI Illuminazione Led
Theta Catalog 2014 PMI Illuminazione Led
About THETA
1
Machine tool illumination total solution Product
THETA provides total solutions for the lighting of all machine tools
1
Theta provides not only lamps but also the solution of illumination inside the machine tools; the solution is
based on the calculation result of a simulation software PAGE 4 Waterproof LED tube luminaries for machine tools
which provides the optimized setup of lamp position and lamp model.
A.Environment setting
Stage(mm):600×320 Stroke(X×Y×Z mm):510×410×460 2
Knife to stage(mm):127~587 Area(L×W×H mm):1280×2320×2700
PAGE 8 LED Flat luminaries for machine tools
B.Illumination simulation with original lamp and position
500.00 Lux
400.00 Lux 200 400
300
350.00 Lux 100
300.00 Lux
3
400
500
250.00 Lux 300 0.5m
200
200.00 Lux 400 600
500
100.00 Lux 700 800
0.8m
Stage center flux is 285 lx, the distance between knife to stage is 150mm
C.Optimize
4
C1: the lamp is mounted beside the stage and the brightness is 120 lx improved compared to the original setting. PAGE 16 LED Warning light
500.00 Lux 500
700 800
300 400 600
400.00 Lux 900
800
350.00 Lux 500
200 700
300.00 Lux 100
300 400
600 900
C2 : the lamp is mounted upside the stage and the brightness is 160 lx improved compared to the original setting.
1
500.00 Lux
500
600
3
400.00 Lux
300 400 600
350.00 Lux 200 700
300.00 Lux 100
500
250.00 Lux 400
600
700
0.5m
200.00 Lux 100 300
500
200
100.00 Lux 600 800
700
Stage 50.00 Lux 400
700
500
0.00 Lux 300
0.8m
Stage center flux is 405 lx, the distance between knife to stage is 150mm
Connector C01- Metal Conduit / C02- Plastic Connector / C03- Plastic Conduit
Cover Material A-Acrylic / G-borosilicate glass
Input Power AC/DC24V
CCT C-5700K
Tube(L)(mm) 472 / 734 / 709
Tube(ø)(mm) 60
High-efficiency thermal module
Model Factory Machine Tube
All-aluminum thermal module
Reinforced Acrylic/
glass cover Specifications
Tube(L) Tube(Ø)
Product Size (mm) Model
(mm) (mm)
Watt(W) CCT(K) Lumen(Lm) Lux @ 0.5m Input Power IP
FMT-60472C -24AD-A-C0X
734 472 10 1000 500
FMT-60472C -24AD-G-C0X
60 5700 AC/DC24V±10% IP67
FMT-60734C- 24AD-A-C0X
734 16 1700 2000
60
FMT-60734C -24AD-G-C0X
FMT-60709C -24AD-A-C0X AC/DC24V±10%
709 709 16 1700 2000
FMT-60709C -24A-A-C0X AC110-220V±10%
60 5700 IP67
FMT-60472C -24A-A-C0X AC110-220V±10%
472 10 1000 500
60
472 64
Accessories selection
60
ø24.4 4
40
ø49
ø42
39.5
ø35
Adapts Europe and the United States imported high efficiency LED which are with high efficacy up to 130 lm/w, 64
low power consumption and can save 50% power or more compared to traditional machine tube lights. 6
With high CRI (>85) which can provide good color rendering for the operator and can avoid misoperation.
Extremely long lifetime (>50,000 hrs) thanks to the use of high quality LED, electronic circuitry and other
2
premium quality materials.
2
IEC 529 IP67 rated, resistance-tested with cooling agents and lubricants.
H100
Anti-reverse connection design, prevent the damage of mis-connection.
102
30
IC temperature protection design, will shut down automatically when the working temperature >125ºC Ø7
20
4 LED LIGHTING FOR MACHINES Waterproof LED tube luminaries for machine tools 5
Connector Authenticate
MEET EN62471 REGULATION
0.9 24000
0.8
20000
CIE y
0.4
10000
THETA tube LED luminaries are glare-free, thanks for (N61547. EN55015. EN61000 standards)
special optical design
THETA Other brand
Illuminance distribution
1 ft Waterproof LED tube luminaries for machine tools
-50
-40
-30
-20
-10
50cm 50cm 0 500 1m
50
200-300Lux
50-100Lux
80
-80
-60
-40
-20
50cm 100cm
0 500 2m
Center flux Center flux 20
380
2000Lux 500Lux 300
40 200
150
60 400-500 Lux
100
80 150-300Lux
2000 Lux 500 Lux 50
100
50-100Lux
-100 -80 -60 -40 -20 0 20 40 60 80 100 2m
6 LED LIGHTING FOR MACHINES Waterproof LED tube luminaries for machine tools 7
Product
LED Flat luminaries for machine tools
Special glare-free treatment by asymmetric optical film, without light spots, not dazzling. Product Feature
Adapts Europe and the United States imported high efficiency LED which are with high efficacy up to 130 lm/w,
low power consumption and can save 50% power or more compared to traditional machine tube lights.
With high CRI (>85) which can provide good color rendering for the operator and can avoid misoperation.
Extremely long lifetime (>50,000 hrs) thanks to the use of high quality LED, electronic circuitry and other
premium quality materials.
IEC 529 IP67 rated, resistance-tested with cooling agents and lubricants.
Tempered glass cover which can resist damage of flying chips during process.
Coding
Optical film
40
25
DC24V±10%
FLT-480C-24D 480 ×54×25 20 2000 1000 5700 / 85 IP67
336 430 (Power Cord 1.5m)
AC/DC24V±10%
FLT-480C-24AD 480×54×25 20 2000 1000 5700 / 85 IP67
(Power Cord 1.5m)
8 LED LIGHTING FOR MACHINES LED Flat luminaries for machine tools 9
Accessories selection Authenticate
MEET EN62471 REGULATION
0.9 24000
40 0.8
CIE y
29
0.4
421.6 10000
439.6 54
0.2 5000
Comparison 0 0
0 0.2 0.4 0.6 0.8 359.29 400 500 600 700 800 900 1000.8
The scheme of THETA special optical effect CIE x Wavelength [nm]
Color coordinates : (0.32,0.34) The spectrum of Theta LED flat luminaries; not
CCT : 5700 K detected under 400nm; meet EN62471 regulation
THETA
Illuminance distribution
1 ft LED Flat luminaries for machine tools
-100
-80
-60
-40
-20
50cm 100cm
0 2m
500
400
Center flux Center flux 20
400-500 Lux
300
2000Lux 500Lux 40 300-400 Lux
200
60 200-300 Lux
80 100-200Lux 100
2000 Lux 500 Lux
Other brands 100
-100 -80 -60 -40 -20 0 20 40 60 80 100
0-100Lux
2m
-80
-60
-40
-20
50cm 150cm
0 2m
1000
800
20
Center flux Center flux 900-1000 Lux
600
4500Lux 500Lux 40 700-800 Lux
400
60 500-600 Lux
80 300-400Lux 200
4500 Lux 500 Lux
100 100-200Lux
-100 -80 -60 -40 -20 0 20 40 60 80 100 2m
10 LED LIGHTING FOR MACHINES LED Flat luminaries for machine tools 11
Product
Arm-mounted LED luminaries 5
Modern and new-fashioned appearance with a special optical design and ergonomic Product Feature
mechanical structure, greatly enhance the advantage of use.
Adapts high efficiency LED up to 130 lm/w, low power consumption and can save 50% power or more
compared to traditional machine tube lights.
With high CRI (> 85) which can provide good color rendering for the operator and can avoid misoperation.
Material : Nylon + fiber glass
Extremely long lifetime (>50,000 hrs) thanks to the use of high quality LED, electronic circuitry and other
Tempered glass cover premium quality materials.
IEC 529 IP65 rated, resistance-tested with cooling agents and lubricants.
Arm-mounted LED luminaries are glare-free, thanks for special optical lens.
Material : Nylon + fiber glass, resist different cooling agents and lubricants
The flexible and balanced arm can be adjusted to any position, This is held without taking any further
action but can be locked if required.
The luminary head can be changed to any position, thanks to the highly flexible joints.
Coding
MCS - 110 W - D0
Product Size (mm) Arm Length(mm) Arm length(mm) D0-0 / D1-280 / D2-280X280
CCT C-5700K
Mount-Base MCS-110XX-D0 MCS-110XX-D1 MCS-110XX-D2 Lamp Holder(mm) 110
115 Model Machine C type Spot light
115 Ø110 307
115
150
110
Specifications
150
60
110
300°
150
Ø6.2-6 45
210°
74
Model Arm length (mm) Angle(º) Watt(W) Lumen(Lm) Lux @ 1m CCT (K) Input power IP
210°
60
45
MCS-110C-D0 0
210° 261 AC/DC
483
Ø110
MCS-110C-D1 280 30 / 60 12 800 900 5700 IP65
45
24V±10%
483
MCS-110C-D2 280×280
335
335
44
300° 300°
210°
74
60 60
0.6
15000
CIE y
0.4
10000
0 0
0 0.2 0.4 0.6 0.8 359.29 400 500 600 700 800 900 1000.8
CIE x Wavelength [nm]
Color coordinates : (0.32,0.34) The spectrum of Theta arm-mounted LED luminaries;
CCT : 5700 K not detected under 400nm; meet EN62471 regulation
Arm-mounted LED luminaries are glare-free, thanks for special optical lens.
Illuminance distribution
Arm-mounted LED luminaries (5700K)
-100
-80
-60
-40
-20
50cm 135cm 900 2m
0
20 800-1000 Lux
Center flux Center flux
40 600-800 Lux 800
3600Lux 500Lux
60 400-600 Lux 600
80
200-400Lux 400
3600 Lux 500 Lux 0-200Lux 200
100
-100 -80 -60 -40 -20 0 20 40 60 80 100 2m
0°
-60° 60°
Point light sources create many shadows which will cause misjudgment and create strong glare.
Product Feature
Extremely long lifetime (>50,000 hrs) thanks to the use of high quality LED, electronic circuitry and other
premium quality materials.
Three sides LED design.
Rated frequency : 3.3Hz, Sound pressure level : 90dB.
Level height 7.2cm.
Main body : ABS + Acrylic, clear and robust design make it easy to distinguish and can resist impact and heat.
Three sides LED design
Coding
FWL - 57 250 RYG 24D B - A - CA
Common Anode
Bass / Tube A Type –Bass+Join+Tube(60mm)
B Type – Bass+Tube(150mm/300mm)
C Type - Bass+Join+Tube(150mm/300mm)
D Type – L+Tube(150mm/300mm)
Buzzer warning
E Type – L+ Join+Tube(150mm/300mm)
Buzzer B / N-A
Input power DC24V
Light Colors R, Y, G
5 TYPES
Light Hight Level 2-250(mm) / Level 3-320(mm)
Diameter(mm) 57 / 75
Model Factory Warning Light
Specifications
FML-57250RY-24D-X N/A
2(R、Y)
FML-57250RY-24DB-X ●
72 72 75 250 2.5
FML-57250RG-24D-X N/A
57 2(R、G)
FML-57250RG-24DB-X ●
57 DC24V±10% 64
FML-57320RYG-24D-X N/A
Buzzer FML-57320RYG-24DB-X ●
320 3
320 4
FML-57320RYG-24D-X-CA (R、Y、G) N/A
FML-57320RYG-24DB-X-CA ●
FML-75250RY-24D-X N/A
2(R、Y)
FML-75250RY-24DB-X ●
250 2.5
FML-75250RG-24D-X N/A
2(R、G) 75 DC24V±10% 64
FML-75250RG-24DB-X ●
DC24V
DC24V
FML-75320RYG-24D-X 3 N/A
320 4
FML-75320RYG-24DB-X (R、Y、G) ●
46.5
Taichung
Taiwan Head Office
CE FCC