The skeletal structure of a roof system (18.0m long and 7.2m wide) is as shown in Figure below. The truss is made up of Howe Truss configuration spaced at 3m intervals. It is desired to specify the appropriate COLD- FORMED RHS sections that will safely carry the anticipated loading using BS design code (Specified steel grade S 355).
Loadings: • Idealised 2D model of the roof truss system for manual analysis:
Note: For wind load P acts upward.
Loads acting on critical trusses are: • The nodal permanent load (Dead load GK)=1.9296 KN • The nodal variable load (imposed load QK)= 2.7 KN • The nodal wind load (WK) = 3.888 KN