The document describes several procedures for testing properties of concrete and steel reinforcement materials, including slump tests to determine workability of fresh concrete, compressive strength tests of cylindrical and hollow block concrete samples, flexural strength tests of beam samples, and tensile strength tests of plain and deformed steel reinforcing bars in different sizes.
The document describes several procedures for testing properties of concrete and steel reinforcement materials, including slump tests to determine workability of fresh concrete, compressive strength tests of cylindrical and hollow block concrete samples, flexural strength tests of beam samples, and tensile strength tests of plain and deformed steel reinforcing bars in different sizes.
The document describes several procedures for testing properties of concrete and steel reinforcement materials, including slump tests to determine workability of fresh concrete, compressive strength tests of cylindrical and hollow block concrete samples, flexural strength tests of beam samples, and tensile strength tests of plain and deformed steel reinforcing bars in different sizes.
moisture, both in the laboratory and in the field. MAKING OF CYLINDRICAL CONCRETE SAMPLE To produce cylindrical concrete sample in the laboratory under accurate control and test conditions using concrete that can be consolidated by rodding or vibration. MAKING OF BEAM CONCRETE SAMPLE To produce beam concrete sample in the laboratory under accurate control and test conditions using concrete that can be consolidated by rodding or vibration. CURING OF CONCRETE SAMPLE To cure concrete samples in the laboratory under accurate control and test conditions using concrete that can be consolidated by rodding or vibration. COMPRESSIVE STRENGT TEST OF THE CYLINDRICAL SAMPLE To determine the compressive strength of cylindrical concrete specimens such as molded concrete cylinder. FLEXURAL STRENGTH TEST OF BEAM SAMPLE To determine the flexural strength of concrete specimens by the use of simple beam with center point loading. COMPRESSIVE STRENGTH TEST OF THE CHB SAMPLE To determine the compressive strength of concrete hollow block. TENSILE STRENGTH TEST OF STEEL BARS (20mm) To obtained the force- deformation diagram (stress-strain diagrams) of a plain bar and a deformed bar of concrete reinforcing steel and compare of their mechanical properties in tension. TENSILE STRENGTH TEST OF STEEL BARS (16mm) To obtained the force- deformation diagram (stress-strain diagrams) of a plain bar and a deformed bar of concrete reinforcing steel and compare of their mechanical properties in tension.
Submitted By: Plate No: Subject: Instructor: Course: Time: Date: Don Roy R. Tampus Exercise 6 Computer Aided Drafting BSCE-2 9:00-10:30 A.M SEPTEMBER 28, 2021 Engr. Renante C. Orang