Professional Documents
Culture Documents
AHTN2022 CHAPTER73 wNOTES
AHTN2022 CHAPTER73 wNOTES
Chapter 73
Articles of iron or steel
E
Notes.
1. In this Chapter the expression “cast iron” applies to products obtained by casting in which iron
predominates by weight over each of the other elements and which do not comply with the
NC
chemical composition of steel as defined in Note 1 (d) to Chapter 72.
2. In this Chapter the word “wire” means hot or cold-formed products of any cross-sectional shape,
of which no cross-sectional dimension exceeds 16 mm.
RE
FE
RE
R
FO
418
E
No. Code ATIGA Concession
Starting
2022
(1) (2) (3) (4) (5) (6)
NC
73.01 Sheet piling of iron or steel, whether or not drilled,
punched or made from assembled elements; welded
angles, shapes and sections, of iron or steel.
7301.10.00 - Sheet piling 3 0 All.
7301.20.00 - Angles, shapes and sections 3 0 All.
RE
rail clips, bedplates, ties and other material
specialized for jointing or fixing rails.
7302.10.00 - Rails 0 0 All.
7302.30.00 - Switch blades, crossing frogs, point rods and other 3 0 All.
crossing pieces
7302.40.00 - Fish-plates and sole plates 3 0 All.
7302.90 - Other :
7302.90.10 - - Sleepers (cross-ties) 3 0 All.
7302.90.90 - - Other 3 0 All.
FE
73.03 Tubes, pipes and hollow profiles, of cast iron.
- Tubes and pipes :
7303.00.11 - - Hubless tubes and pipes 5 0 All.
7303.00.19 - - Other 10 0 All.
- Other :
7303.00.91 - - With an external diameter not exceeding 100 mm 10 0 All.
7303.00.99 - - Other 10 0 All.
RE
E
No. Code ATIGA Concession
Starting
2022
(1) (2) (3) (4) (5) (6)
7304.29.20 - - - Casing and tubing with a yield strength less than 3 0 All.
NC
80,000 psi, with threaded end
7304.29.30 - - - Casing and tubing with a yield strength 80,000 psi or 3 0 All.
more, whether or not with threaded end
- Other, of circular cross-section, of iron or non-alloy
steel :
7304.31 - - Cold-drawn or cold-rolled (cold-reduced) :
7304.31.10 - - - Drillrod casing and tubing with pin and box threads 3 0 All.
7304.31.20 - - - High-pressure pipe capable of withstanding a 5 0 All.
pressure of not less than 42,000 psi
7304.31.40 - - - Other, having an external diameter of less than 140 5 0 All.
RE
mm and containing less than 0.45 % by weight of
carbon
7304.31.90 - - - Other 5 0 All.
7304.39 - - Other :
7304.39.20 - - - High-pressure pipe capable of withstanding a 5 0 All.
pressure of not less than 42,000 psi
7304.39.40 - - - Other, having an external diameter of less than 140 5 0 All.
mm and containing less than 0.45 % by weight of
carbon
7304.39.90 - - - Other 5 0 All.
FE
- Other, of circular cross-section, of stainless steel :
7304.41.00 - - Cold-drawn or cold-rolled (cold-reduced) 5 0 All.
7304.49.00 - - Other 3 0 All.
- Other, of circular cross-section, of other alloy steel :
7304.51 - - Cold-drawn or cold-rolled (cold-reduced) :
7304.51.10 - - - Drillrod casing and tubing with pin and box threads 3 0 All.
7304.51.20 - - - High-pressure pipe with a yield strength not less than 5 0 All.
42,000 psi
RE
E
No. Code ATIGA Concession
Starting
2022
(1) (2) (3) (4) (5) (6)
- Other, welded :
NC
7305.31 - - Longitudinally welded :
7305.31.10 - - - Stainless steel pipes and tubes 5 0 All.
7305.31.90 - - - Other 10 0 All.
7305.39 - - Other :
7305.39.10 - - - High-pressure pipe with a yield strength not less than 10 0 All.
42,000 psi
7305.39.90 - - - Other 10 0 All.
7305.90.00 - Other 10 0 All.
RE
open seam or welded, riveted or similarly closed), of
iron or steel.
- Line pipe of a kind used for oil or gas pipelines :
7306.11 - - Welded, of stainless steel :
7306.11.10 - - - Longitudinally electric resistance welded (ERW) 10 0 All.
7306.11.90 - - - Other 10 0 All.
7306.19 - - Other :
7306.19.10 - - - Longitudinally electric resistance welded (ERW) 10 0 All.
7306.19.20 - - - Spiral or helical submerged arc welded 10 0 All.
FE
7306.19.90 - - - Other 10 0 All.
- Casing and tubing of a kind used in drilling for oil or gas :
7306.21.00 - - Welded, of stainless steel 10 0 All.
7306.29.00 - - Other 10 0 All.
7306.30 - Other, welded, of circular cross-section, of iron or non-
alloy steel :
- - Boiler tubes :
7306.30.11 - - - With an external diameter less than 12.5 mm 3 0 All.
RE
E
No. Code ATIGA Concession
Starting
2022
(1) (2) (3) (4) (5) (6)
7306.40.30 - - Pipes and tubes containing by weight at least 30 % of 3 0 All.
NC
nickel, with an external diameter not exceeding 10 mm
7306.40.90 - - Other 7 0 All.
7306.50 - Other, welded, of circular cross-section, of other alloy
steel :
- - Boiler tubes :
7306.50.11 - - - With an external diameter less than 12.5 mm 3 0 All.
7306.50.19 - - - Other 3 0 All.
- - Other :
7306.50.91 - - - With an external diameter less than 12.5 mm 7 0 All.
7306.50.99 - - - Other 7 0 All.
RE
- Other, welded, of non-circular cross-section :
7306.61 - - Of square or rectangular cross-section :
7306.61.10 - - - With an external diagonal cross-section less than 7 0 All.
12.5 mm
7306.61.90 - - - Other 7 0 All.
7306.69 - - Of other non-circular cross-section :
7306.69.10 - - - With an external diagonal cross-section less than 7 0 All.
12.5 mm
7306.69.90 - - - Other 7 0 All.
FE
7306.90 - Other :
- - Copper brazed pipes and tubes :
7306.90.11 - - - With an external diagonal cross-section less than 3 0 All.
12.5 mm
7306.90.19 - - - Other 3 0 All.
- - Other :
7306.90.91 - - - High pressure pipes with a yield strength not less than 7 0 All.
42,000 psi, with an internal diameter of less than
12.5 mm
RE
E
No. Code ATIGA Concession
Starting
2022
(1) (2) (3) (4) (5) (6)
7307.23 - - Butt welding fittings :
NC
7307.23.10 - - - Having an internal diameter of less than 15 cm 7 0 All.
7307.23.90 - - - Other 7 0 All.
7307.29 - - Other :
7307.29.10 - - - Having an internal diameter of less than 15 cm 3 0 All.
7307.29.90 - - - Other 3 0 All.
- Other :
7307.91 - - Flanges :
7307.91.10 - - - Having an internal diameter of less than 15 cm 3 0 All.
7307.91.90 - - - Other 3 0 All.
RE
7307.92 - - Threaded elbows, bends and sleeves :
7307.92.10 - - - Having an internal diameter of less than 15 cm 10 0 All.
7307.92.90 - - - Other 10 0 All.
7307.93 - - Butt welding fittings :
7307.93.10 - - - Having an internal diameter of less than 15 cm 10 0 All.
7307.93.90 - - - Other 10 0 All.
7307.99 - - Other :
7307.99.10 - - - Having an internal diameter of less than 15 cm 1 0 All.
7307.99.90 - - - Other 1 0 All.
FE
73.08 Structures (excluding prefabricated buildings of
heading 94.06) and parts of structures (for example,
bridges and bridge-sections, lock-gates, towers,
lattice masts, roofs, roofing frame-works, doors and
windows and their frames and thresholds for doors,
shutters, balustrades, pillars and columns), of iron or
steel; plates, rods, angles, shapes, sections, tubes
and the like, prepared for use in structures, of iron or
steel.
RE
E
No. Code ATIGA Concession
Starting
2022
(1) (2) (3) (4) (5) (6)
7308.90.60 - - Perforated cable trays 10 0 All.
NC
- - Other :
7308.90.92 - - - Guardrails 10 0 All.
7308.90.99 - - - Other 10 0 All.
RE
7309.00.11 - - Lined or heat-insulated 10 0 All.
7309.00.19 - - Other 10 0 All.
- Other :
7309.00.91 - - Lined or heat-insulated 10 0 All.
7309.00.99 - - Other 10 0 All.
- - - Other :
7310.29.91 - - - - Of tinplate 10 0 All.
7310.29.92 - - - - Other casting, forging or stamping, in the rough state 10 0 All.
7310.29.99 - - - - Other 10 0 All.
FO
E
No. Code ATIGA Concession
Starting
2022
(1) (2) (3) (4) (5) (6)
7311.00.23 - - Of a capacity of less than 30 l, for Liquefied Petroleum 10 0 All.
NC
Gas (LPG)
7311.00.24 - - Of a capacity of 30 l or more, but less than 110 l, for 10 0 All.
Liquefied Petroleum Gas (LPG)
7311.00.25 - - Other, for Liquefied Petroleum Gas (LPG) 10 0 All.
7311.00.26 - - Other, of a capacity of less than 30 l 0 0 All.
7311.00.27 - - Other, of a capacity of 30 l or more, but less than 110 l 0 0 All.
7311.00.29 - - Other 0 0 All.
- Other :
7311.00.91 - - Of a capacity not exceeding 7.3 l 10 0 All.
7311.00.92 - - Of a capacity more than 7.3 l but less than 30 l 10 0 All.
RE
7311.00.94 - - Of a capacity of 30 l or more, but less than 110 l 10 0 All.
7311.00.99 - - Other 10 0 All.
73.13 7313.00.00 Barbed wire of iron or steel; twisted hoop or single 10 0 All.
RE
intersection :
7314.31.00 - - Plated or coated with zinc 10 0 All.
7314.39.00 - - Other 10 0 All.
- Other cloth, grill, netting and fencing :
7314.41.00 - - Plated or coated with zinc 10 0 All.
7314.42.00 - - Coated with plastics 10 0 All.
7314.49.00 - - Other 10 0 All.
7314.50.00 - Expanded metal 10 0 All.
425
Rates of Duty (%)
ASEAN Member
Hdg. AHTN 2022 MFN
Description States Enjoying
E
No. Code ATIGA Concession
Starting
2022
(1) (2) (3) (4) (5) (6)
73.15 Chain and parts thereof, of iron or steel.
NC
- Articulated link chain and parts thereof :
7315.11 - - Roller chain :
7315.11.10 - - - Bicycle or motorcycle chain 1 0 All.
- - - Other :
7315.11.91 - - - - Transmission type, of a pitch length of not less than 0 0 All.
6 mm and not more than 32 mm
7315.11.99 - - - - Other 0 0 All.
7315.12 - - Other chain :
7315.12.10 - - - Bicycle or motorcycle chain 1 0 All.
7315.12.90 - - - Other 1 0 All.
RE
7315.19 - - Parts :
7315.19.10 - - - Of bicycle or motorcycle chain 1 0 All.
7315.19.90 - - - Other 0 0 All.
7315.20.00 - Skid chain 3 0 All.
- Other chain :
7315.81.00 - - Stud-link 1 0 All.
7315.82.00 - - Other, welded link 7 0 All.
7315.89 - - Other :
FE
7315.89.10 - - - Bicycle or motorcycle chain 7 0 All.
7315.89.90 - - - Other 7 0 All.
7315.90 - Other parts :
7315.90.20 - - Of bicycle or motorcycle chain 7 0 All.
7315.90.90 - - Other 7 0 All.
73.16 7316.00.00 Anchors, grapnels and parts thereof, of iron or steel. 1 0 All.
RE
16 mm
7318.12.90 - - - Other 10 0 All.
7318.13.00 - - Screw hooks and screw rings 10 0 All.
7318.14 - - Self-tapping screws :
7318.14.10 - - - Having a shank of an external diameter not exceeding 10 0 All.
16 mm
7318.14.90 - - - Other 10 0 All.
426
Rates of Duty (%)
ASEAN Member
Hdg. AHTN 2022 MFN
Description States Enjoying
E
No. Code ATIGA Concession
Starting
2022
(1) (2) (3) (4) (5) (6)
7318.15 - - Other screws and bolts, whether or not with their nuts
NC
or washers :
7318.15.10 - - - Having a shank of an external diameter not exceeding 10 0 All.
16 mm
7318.15.90 - - - Other 10 0 All.
7318.16 - - Nuts :
7318.16.10 - - - For bolts having a shank of an external diameter not 10 0 All.
exceeding 16 mm
7318.16.90 - - - Other 10 0 All.
7318.19 - - Other :
7318.19.10 - - - Having a shank of an external diameter not exceeding 10 0 All.
RE
16 mm
7318.19.90 - - - Other 10 0 All.
- Non-threaded articles :
7318.21.00 - - Spring washers and other lock washers 10 0 All.
7318.22.00 - - Other washers 10 0 All.
7318.23 - - Rivets :
7318.23.10 - - - Having an external diameter not exceeding 16 mm 10 0 All.
7318.23.90 - - - Other 10 0 All.
7318.24.00 - - Cotters and cotter-pins 10 0 All.
FE
7318.29 - - Other :
7318.29.10 - - - Having a shank of an external diameter not exceeding 10 0 All.
16 mm
7318.29.90 - - - Other 10 0 All.
included.
7319.40 - Safety pins and other pins :
7319.40.10 - - Safety pins 10 0 All.
7319.40.20 - - Other pins 0 0 All.
7319.90 - Other :
7319.90.10 - - Sewing, darning or embroidery needles 3 0 All.
7319.90.90 - - Other 1 0 All.
E
No. Code ATIGA Concession
Starting
2022
(1) (2) (3) (4) (5) (6)
7320.90 - Other :
NC
7320.90.10 - - Suitable for use on motor vehicles 10 0 All.
7320.90.90 - - Other 10 0 All.
RE
7321.12.00 - - For liquid fuel 15 0 All.
7321.19 - - Other, including appliances for solid fuel :
7321.19.10 - - - For solid fuel 15 0 All.
7321.19.90 - - - Other 15 0 All.
- Other appliances :
7321.81.00 - - For gas fuel or for both gas and other fuels 15 0 All.
7321.82.00 - - For liquid fuel 15 0 All.
7321.89.00 - - Other, including appliances for solid fuel 15 0 All.
7321.90 - Parts :
FE
7321.90.10 - - Of kerosene stoves 15 0 All.
- - Of cooking appliances and plate warmers using gas
fuel :
7321.90.21 - - - Burner; components made by stamping or pressing 15 0 All.
processes
7321.90.29 - - - Other 15 0 All.
7321.90.90 - - Other 15 0 All.
RE
- Other :
7323.91 - - Of cast iron, not enamelled :
7323.91.10 - - - Kitchenware 15 0 All.
7323.91.20 - - - Ashtrays 15 0 All.
7323.91.90 - - - Other 15 0 All.
7323.92.00 - - Of cast iron, enamelled 15 0 All.
7323.93 - - Of stainless steel :
7323.93.10 - - - Kitchenware 15 0 All.
7323.93.20 - - - Ashtrays 15 0 All.
7323.93.90 - - - Other 15 0 All.
428
Rates of Duty (%)
ASEAN Member
Hdg. AHTN 2022 MFN
Description States Enjoying
E
No. Code ATIGA Concession
Starting
2022
(1) (2) (3) (4) (5) (6)
7323.94.00 - - Of iron (other than cast iron) or steel, enamelled 15 0 All.
NC
7323.99 - - Other :
7323.99.10 - - - Kitchenware 15 0 All.
7323.99.20 - - - Ashtrays 15 0 All.
7323.99.90 - - - Other 15 0 All.
RE
- Baths :
7324.21 - - Of cast iron, whether or not enamelled :
7324.21.10 - - - Bathtubs having rectangular or oblong interior shape 15 0 All.
7324.21.90 - - - Other 15 0 All.
7324.29 - - Other :
7324.29.10 - - - Bathtubs having rectangular or oblong interior shape 15 0 All.
7324.29.90 - - - Other 15 0 All.
7324.90 - Other, including parts :
7324.90.10 - - Flushing water closets or urinals (fixed type) 15 0 All.
FE
- - Other :
7324.90.91 - - - Parts of kitchen sinks or bathtubs 15 0 All.
7324.90.93 - - - Parts of flushing water closets or urinals (fixed type) 15 0 All.
7324.90.99 - - - Other 15 0 All.
E
No. Code ATIGA Concession
Starting
2022
(1) (2) (3) (4) (5) (6)
- - Other :
NC
7326.90.91 - - - Cigarette cases and boxes 15 0 All.
7326.90.99 - - - Other 15 0 All.
________________________________________________________________________________________________
RE
FE
RE
R
FO