Professional Documents
Culture Documents
ElectroTech Final
ElectroTech Final
1 / 10
Electrical and Electronic Technology Final Exam 2020 Spring
2) For the given diagram, determine the value and direction of the current in branch BE,
show your work.
2 / 10
Electrical and Electronic Technology Final Exam 2020 Spring
3) Using Thevenin’s theorem, calculat the current through the 10 resistor in the figure.
3 / 10
Electrical and Electronic Technology Final Exam 2020 Spring
4) For the given circuit diagram, using the equivalent power source method to calculate the
current in 1 resistor.
4 / 10
Electrical and Electronic Technology Final Exam 2020 Spring
5) For the circuit shown in the figure, the switch is closed on to position 1 when t=0 and then
moved to position 2 when t=1.5 ms. Determine the current in the inductor when t = 2.5 ms.
5 / 10
Electrical and Electronic Technology Final Exam 2020 Spring
6) For the given circuit diagram, switch S is at position 1 initially, and the circuit is in
steady state.
(1) At t = 0, set the switch to position 2, calculate uc at time t =
(2) At t = , set the switch to position 1, calculate uc at time t=0.02s.
6 / 10
Electrical and Electronic Technology Final Exam 2020 Spring
7) A circuit as the figure is in steady state before switching, calculate uc, and the potentials of
VB and VA.
7 / 10
Electrical and Electronic Technology Final Exam 2020 Spring
8 / 10
Electrical and Electronic Technology Final Exam 2020 Spring
9 / 10
Electrical and Electronic Technology Final Exam 2020 Spring
10) Two stage amplification circuit is as shown. 1 = 1 =40, rbe1 = 1.37k,rbe1 = 0.89 k.
(1) Plot the DC path of the circuit
(2) Calculate the quiescent working point (IB, IC, UCE) for every stage. (when calculate UCE1,
IB2 can be neglected )
(3) Plot the small-signal equivalent circuit and calculate Au1, Au2 and Au (extra credit)
(4) Calculate ri and ro (extra credit)
10 / 10