Professional Documents
Culture Documents
How To Build A Workbench For Your Garage To Get Organized
How To Build A Workbench For Your Garage To Get Organized
There are many different ways to get your garage organized but one of the easiest is to build a DIY Workbench. This handy organizer will cost
you from $50 to $200 dollars (depending on your local prices) and you can build this Garage Workbench in as little as 4 hours. The bench will
include a place to hang your tools, a nice bright overhead light, a place to construct and build other projects, and help you contain the mess in
your garage once and for all.
Ad
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 1/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
x
x
This 30 inch deep x 6 feet long workbench is the ultimate in garage organization. It is constructed from fifteen pieces of 8 foot long 2 x 4’s and
one 1/2 inch thick sheet of plywood. Screw the wood framing together with the 3 inch screws. Then screw the plywood onto the frame with the
1 5/8 inch screws.
We went to our local Home Depot and had them cut all of the wood for us to make our life easier.
The wood cost was right around $80 bucks and they cut the wood for us for free.
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 2/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
Here is our wood for our bench neatly organized and labeled to make assembly easy. x
x
We started out putting the bottom shelf of our workbench together first.
We used the 3″ drywall screws to start to put the framing of the bench together.
It is recommended to drill a few pilot holes in the wood with a small drill bit before screwing in the screws.
We then assembled the top of the workbench in the same manner as the bottom using the 3″ wood screws.
Once the top and bottom shelf were assembled we screwed the legs to the bench using more 3″ wood screws.
NOTE: Always put two 3″ wood screws evenly spaced and into the attach areas as shown in the photo above.
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 3/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
x
x
We then attached the 6 foot by 30″ deep top plywood board using the 1 5/8 wood screws.
This will be the area that we do our future projects on that will keep our garage organized.
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 4/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
We are progressing along as the top pegboard structure and the bottom shelf top has been assembled. x
x
Ad
OPEN
Here is the finished project with our nice bright light and pegboard installed to hang our tools.
This project will take you from 4 to 8 hours depending on your skill level
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 5/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
and your access to the proper tools you have to make this project go faster. x
x
Please Share Our DIY Repair Help Projects:
3K+
Related Articles
Garage Shelves DIY - How To Build A Shelving How To Build a Backyard Chicken Coop for DIY $20 Dollar Beginner Wooden Bench Project
Unit With Wood under $250
Allen is a Home Maintenance/Appliance Tech and the author/creator of this website. He has 33 years of experience troubleshooting and
repairing all types of appliances. Contact here
Appliance Parts
Samsung Heating Element Dc47- Ultra Durable 3949238 Washer Lid OEM LG by Primeco 4681EA2001T Replacement Whirlpool Dishwasher
00019A Switch Replac… Drain Pump … Pump W10…
KITCHEN BASICS 101: 241798224 Ultra Durable 3406107 Dryer Door ERP 240323001 Refrigerator Door Bin Clothes Washer Water Inlet Valve for
Ice Maker Re… Switch Replacem… 285805 Whirlpool,…
Ads by Amazon
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 6/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
x
x
OPEN
Ad
WANDA
SEPTEMBER 1, 2017 AT 8:08 PM
Thanks for the helpful instructions. I’m in the process of building my first official workbench and organizing my smallish garage.
Reply
BRENTON NEWELL
MAY 5, 2016 AT 10:59 PM
Reply
Brenton Newell,
The dimensions of the peg board will be different for each area the workbench will be in. It will all depend on the size you need.
-RR
Reply
JOSHUA LAW
APRIL 28, 2016 AT 4:16 PM
I’m not very gifted at all when it comes to building things. I took this project on for my mother who needed a workbench. Took about 3-3 1/2 hrs
but turned out great. Very easy to construct. Thanks for the plans
Reply
SCOTT
DECEMBER 30, 2015 AT 7:26 PM
I am a fairly inexperienced DIYer and I have a few questions: How far apart are the joists, and what are the measurements of the two shelves
and work surfaces and I’m assuming they can be cut from the single piece of plywood? Thanks in advance.
Reply
DAVID
MARCH 5, 2015 AT 10:08 PM
RR,
Finished bottom and about to add upper shelf and pegboard. Just wanted to say thanks because this is turning out wonderful. I excluded the
light and pegboard accessories having already had them and I’m at $105 with a soon to be perfect workbench.
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 7/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
Replyx
x
OPEN
Ad
DAVID
MARCH 3, 2015 AT 8:28 AM
This looks like the answer for me, just curious about the size of the pegboard. I know HD sells small pegboard setups and large yet this looks
like somewhere in the middle. Dimensions of it cut and was this available whole to purchase? Thanks for the great knowledge!
Reply
David,
Home Depot or Lowe’s will cut pegboard or wood to size. And they will do it free. If you need a smaller workbench, just reduce the
dimensions by a certain percentage.
-RR
Reply
RICHARD
FEBRUARY 4, 2015 AT 4:40 PM
Hi,
thanks for a great article. I notice you specify drywall screws. Should they be fine thread or coarse thread?
Cheers!
Reply
Richard,
Coarse threads are best for this type of woodworking project.
-RR
Reply
Leave a Comment
Your email address will not be published. Required fields are marked *
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 8/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
x
Type here..
x
Name*
Email*
Website
Save my name, email, and website in this browser for the next time I comment.
Post Comment »
This site uses Akismet to reduce spam. Learn how your comment data is processed.
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 9/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
x
x
Ad
Open
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 10/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
x
x
MỞ
Ad
MỞ
Ad
OPEN
Ad
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 11/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
x
x
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 12/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 13/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 14/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
Can I Turn The AC Off To Save Money? AC ON vs AC OFF July 13, 2018 x
Refrigerator Never Stops Running – Fridge Troubleshooting July 12, 2018
Bad Smell From Central Air Conditioner – What Causes Moldy Smell? July 6, 2018
Fix Noisy Faucet – Water Hammering Troubleshooting June 29, 2018
Refrigerator Door Bin Broken – DIY Fridge Shelf Replacement June 26, 2018
Whirlpool Top Load Washer F8 E1 Error Code – WATER FILL ISSUE June 21, 2018
8 Tips To Fix A Refrigerator Dispenser Not Working June 15, 2018
Samsung Refrigerator Randomly Beeping – What Causes Alarm Beeps? June 9, 2018
Whirlpool Washer Error Code LF – LONG FILL May 31, 2018
Dishwasher Not Spraying Water – How To Repair May 25, 2018
Electric Clothes Dryer Not Heating Fix – Easy DIY Repair Guide May 24, 2018
Godrej Washing Machines Error Codes – Fault Code Definitions May 17, 2018
Whirlpool Dishwasher Filter Cleaning – Step By Step May 10, 2018
Washing Machine Leaking Water From Bottom – How To Fix? May 8, 2018
LG Front Load Washing Machine Error Code Ub or UE – How To Clear Error Codes May 5, 2018
This DIY "Do it Yourself" website was created by maintenance professionals and home renovating experts. We produce weekly "How To" articles with
detailed step by step instructions & illustrations about fixing, organizing, recycling, repairing, renovating, removing, replacing & more. Information
contained within RemoveandReplace.com is researched and backed by experienced DIY technicians. We aim to always deliver relevant and engaging
content where facts and information provided is checked and rechecked for accuracy.
Note: Any images or third-party logos on this page belong to their respective copyright holders and are used for informational purposes only.
Disclaimer: Posts on this website may contain references to products from one or more of our advertisers. We may receive compensation when you click
on links to those products.
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 15/16
11/3/2021 How To Build A Workbench For Your Garage To Get Organized
Home DIY Repair Fix It Troubleshooting Home DIY Projects Step By Step Questions and Answers Helpful Hints DIY Ideas x
Create Something Woodworking Free Appliance Repair Help About Us Contact Us Privacy Policy
https://removeandreplace.com/2013/07/17/how-to-build-a-workbench-for-your-garage-to-get-organized/ 16/16