Professional Documents
Culture Documents
22 Reyhan Oliviera P. TOLI5 MidTestEnglish
22 Reyhan Oliviera P. TOLI5 MidTestEnglish
The main function of the oscilloscope is to Projecting electrical signals and frequencies into
graphic image form to then be displayed as a visual electrical image
-Measuring the number of frequencies and waves
-To determine the waveform of a voltage.
-To analyze waves and other phenomena in an electronic circuit.
-To view and read the amplitude, voltage, period and frequency of an unknown signal.
-To measure the change in flow (phase) of the input signal.
-To find out the phase difference between two signals
-Measuring AC/DC frequency and voltage
b. Current Transformator
Transformator can change the level of one AC voltage to another voltage level. Examples of
changes such as lowering the AC voltage from 220VAC to 12VAC or increasing the voltage
from 110VAC to 220VAC.
The transformer operates following the principle of Electromagnetic Induction and can only
function on AC voltage (alternating current)
The CT transformer has 2 times more turns than the non- CT transformer. CT transformers are
commonly used to make full-wave symmetrical power supply circuits as are mostly used for
today's amplifiers that use positive, neutral, and negative poles.
D. Power Supply DC
5.
from the picture On the left is the electrical network system from the center to the consumer, the
picture on the right is the human circulation system. The correlation of the two images is that if
there is a problem at one point, it will be fatal to the whole because everything is connected to
each other, if there is a problem from the center everything will be affected