Professional Documents
Culture Documents
Catmultisl 50 en
Catmultisl 50 en
new
The solution for
measurement &
> Industry
> Infrastructure
analysis
multi_076_a_1_cat.eps
Strong points
MULTIS L50
> Large backlit LCD display
> Direct display of
Function Principle diagram multimeasurement and
metering values
The MULTIS L50 is a panel mounted digital
> RS485 MODBUS
meter displaying multi-measurement and
communication
energy values directly on its large backlit
LCD display. It is designed for utilisation > Inputs/Output for control/
on three-phase or single-phase networks command ou pulses
with connection via CT and is suitable for
applications of up to 6000 A. The product can
Conformity to standards
MUL
TIS
L5
0
Advanced functionalities
The MULTIS L50 offers input/output functions
as standard and has a pulse output or RS485
MODBUS communication output.
Functions
Front panel
1. Backlit LCD display.
2. Direct access key for currents (instantaneous and max. values), current THD.
3. Direct access key for voltages, frequency and voltage THD.
4. Pushbutton for active, reactive, and apparent power (instantaneous and max. values)
and power factor.
multi_076x_a_2_cat.eps
5. Direct access key for energies, hour meter and programming menu.
1 2 3 4 5
Case
92 +- 0.0
0.8
Type panel mounting
Dimensions W x H x D 96 x 96 x 60 mm
Case degree of protection IP30
Front degree of protection IP52
Display type backlit LCD display
Terminal block type fixed or plug-in
Voltage and other connection cross-section 0.2 … 2.5 mm2
multi_075_a_1_x_cat.eps
96
MU
LTIS
L5
0
92 +- 0.0
0.8 Current connection cross-section 0.5 … 6 mm2
Weight 400 g
I
35
>
V
F
> P
45
PF
OK
E
PR
15
OG
96
Plug-in modules
MULTIS L50
1 Output
diris_445_a_1_cat
Communication
diris_447_a_1_cat
3 inputs, 1 output
diris_449_a_1_cat
Accessories
Current transformers IP65 protection Panel mounting kit
(See page 584) for a 144 x 96 mm cut-out
trafo_077_b_2_cat
diris_720_a_2_cat
diris_718_b_1_cat
trafo_024_a_2_cat
Electrical characteristics
Current measurement (TRMS) Energy accuracy
Via CT primary 9 999 A Active (according to IEC 62053-21) Class 1
Via CT secondary 5A Reactive (according to IEC 62053-23) Class 2
Measurement range 0 … 11 kA Auxiliary power supply
Input consumption 0.6 VA Alternating voltage 110 … 250 VAC
Measurement updating period 1s AC tolerance ± 10 %
Direct voltage 120 … 250 VDC
Accuracy 1%
DC tolerance ± 10%
Permanent overload 6A
Frequency 50 / 60 Hz
Intermittent overload 10 In for 1 s
Consumption 10 VA
Voltage measurements (TRMS) Pulse or alarm output
Direct measurement between phases 50 … 500 VAC Number 1
Direct measurement between phase and neutral 28 … 289 VAC Type 100 VDC - 0.5 A - 10 VA
Input consumption ≤ 0.1 VA Max. number of operations ≤ 108
Measurement updating period 1s Inputs
Accuracy 1% Number 3
Permanent overload 800 VAC Power supply 10 … 30 VDC
Power measurement Minimum signal width 10 ms
Measurement updating period 1s Minimum duration between 2 pulses 18 ms
Accuracy 1% Type Phototransistors
Power factor measurement Communication
Measurement updating period 1s Link RS485
Accuracy 1% Type 2 … 3 half duplex wires
Frequency measurement Protocol MODBUS RTU
MODBUS® speed 1400 … 38400 bauds
Measurement range 45 … 65 Hz
Operating conditions
Measurement updating period 1s
Operating temperature - 10 … + 55 °C
Accuracy 0.1 %
Storage temperature - 20 … + 85 °C
Relative humidity 95 %
Terminals
multi_063_a_1_x_cat.eps
multi_065_a_1_x_cat.eps
multi_066_a_1_x_cat.eps
+ - + - + -
0V - + 1 1 8 19
1 2 13 1 4 15 1 6 17 1 9 18
0n OUT 1
RS485 R = 120 IN 3 IN 2 IN 1 OUT 1
Connection
Recommendation:
- For IT earthing systems, it is recommended that the CT secondary is not connected to earth.
- When disconnecting the DIRIS, the secondary of each current transformer must be short-circuited. This operation can be carried out automatically by a SOCOMEC
PTI, an accessory which is included in this catalogue. Please consult us.
1 1 1 1 1 1
multi_073_a_1_x_cat.eps
multi_074_a_1_x_cat.eps
multi_072_a_1_x_cat.eps
V1 V2 V3 VN S1 S2 S1 S2 S1 S2 V1 V2 V3 VN S1 S2 S1 S2 S1 S2 V1 V2 V3 VN S1 S2 S1 S2 S1 S2
I1 I2 I3 I1 I2 I3 I1 I2 I3
Use of 1 CT reduces by 0.5% the accuracy of the phases, 1. Fuses 0.5 A gG / 0.5 A class CC. 1. Fuses 0.5 A gG / 0.5 A class CC.
the current of which is worked out by vector calculation.
1. Fuses 0.5 A gG / 0.5 A class CC.
3/4 wires with 3 CTs 3 wires with 2 CTs 3 wires with 2 CTs
P1 L1 P1 L1
N S1 S2 S1 P1
P1 L2 L2
L1 P1 S1 S2
S1 S2 L3 L3
L2
P1 S1 S2
L3
S1 S2
1 1 1 1 1 1
multi_070_a_1_x_cat.eps
multi_071_a_1_x_cat.eps
diris_395_d_1_x_cat.eps
1 1 1
S1 S2 S1 S2 S1 S2 V1 V2 V3 VN S1 S2 S1 S2 S1 S2 V1 V2 V3 VN S1 S2 S1 S2 S1 S2
V1 V2 V3 VN
I1 I2 I3 I1 I2 I3 I1 I2 I3
1. Fuses 0.5 A gG / 0.5 A class CC. Use of 2 CTs reduces by 0.5% the accuracy of the Use of 2 CTs reduces by 0.5% the accuracy of the
phases, the current of which is worked out by vector phases, the current of which is worked out by vector
calculation. calculation.
1. Fuses 0.5 A gG / 0.5 A class CC. 1. Fuses 0.5 A gG / 0.5 A class CC.
Additional information
1 1
LIYCY-CY
multi_067_a_1_x_cat.eps
multi_068_a_1_x_cat.eps
0V - + A U X
ON
RS485
References
Expert Services
> Study, definition, advice, implementation, maintenance and training…
Our experts “Expert Services” offer complete support for the success
of your project.