Professional Documents
Culture Documents
2017 SR Rev 1
2017 SR Rev 1
2017 SR Rev 1
Rates of labour
D SR ITEM DESCRIPTION UNIT RATE
1 1.1 Diploma Engineer Per day 650
2 1.2 Graduate Engineer Per day 870
2.SUPPLY OF MATERIALS
SR ITEM
D DESCRIPTION UNIT RATE
NO
3 2.1 Supply of Sand for Concrete/ Masonry works and Filter Beds. Cum 570.7
1343 2.1 Supply of Cement 43 grade on Sale Invoice by SCCL Bag 167
1344 2.11.1 Supply of Mild steel Round bars on Sale Invoice by SCCL MT 35000
1345 2.11.2 Supply of HYSD / TMT Bars on Sale Invoice by SCCL MT 34800
Supply of Structural Steel Angles/Channels /Joists/ Square Bars/ Flats on
1346 2.11.3 MT 37600
Sale Invoice by SCCL
1347 2.11.4 Supply of Structural steel plates on Sale Invoice by SCCL MT 37850
1348 2.11.5 Supply of Structural steel Flats on Sale Invoice by SCCL MT 40901.4
Supply of 20mm size crushed metal (SS-5) Hard broken stone of granite,
4 2.2.1 free from dust obtained by quarrying, wedging, breaking, burning, Cum 1238.2
splitting, & blasting includes 1KM initial lead
Supply of 40mm size crushed metal (SS-5) Hard broken stone of granite,
5 2.2.2 free from dust obtained by quarrying, wedging, breaking, burning, Cum 861.1
splitting, & blasting includes 1KM initial lead
Flyash Cement / lime solid blocks with compressive strength of 50
6 2.3.1 Each 3.6
kg/cm2 (IS : 12894 - Class -5) - 225 x 100 x 60 mm
Flyash Cement / lime solid blocks with compressive strength of 50
7 2.3.2 Each 13.6
kg/cm2 (IS : 12894 - Class -5) - 300 x 200 x 150mm
Flyash Cement / lime solid blocks with compressive strength of 50
8 2.3.3 Each 14.5
kg/cm2 (IS : 12894 - Class -5) - 290x225x140mm
Flyash Cement / lime solid blocks with compressive strength of 50
9 2.3.4 Each 10
kg/cm2 (IS : 12894 - Class -5) - 290x100x140mm
Supply of porcelain foot rest for squatting I.W.C. (Rectangular pair) of
10 2.4.1 size 250mmx 125mmx15mm thick first quality ISI marked conforming to Pair 133.8
IS 2556-Part 10: 1974
Supply of 15mm PVC connection with brass union nut C.P coated
19 2.4.10 Each 71
Supply of CP finish brass body 32 mm dia nominal size waste coupling
20 2.4.11 with half / full thread & brass check nut conforming to IS 2963: 1979 Each 154.5
Supply of Stainless steel 4 Inches dia round Grating with frame for
21 2.4.12 Each 36.7
nahany or floor trap cover
22 2.4.13 Supply of 304.8 x 228.6mm CI frame & cover over gully traps Each 70.2
23 2.4.14 Supply of 12.7mm brass bib cock Indian make 300grams Each 163.6
Supply of 15 mm nominal size CP finish brass stop valve screw type with
24 2.4.15 Each 152
internal /external threaded conforming to IS 8931
Supply of 12.7 mm dia NP pillar cock heavy duty Ist quality Indian make
25 2.4.16 Each 595.6
Seiko/ Senior/ Nice or equivalent
26 2.4.17 Supply of 12.7mm dia NP Lift cock 1st quality Each 157
27 2.4.18 Supply of G.I pipe plug of size 15mm nominal size dia Each 8
28 2.4.19 Supply of 20mm dia G.I plug Each 11.6
Supply of 580 x 440mm Orissa pan white glazed W.C first quality ISI
11 2.4.2 marked conforming to IS 2556 - part 3- 1981 with P or S trap Hindware/ Each 878
parry ware/ Neycer.
29 2.4.20 Supply of 50mm dia of G.I PLUG Each 87.8
30 2.4.21 Supply of G.I union 15mm Ist Quality Each 31.6
31 2.4.22 Supply of G.I union 20mm Ist Quality Each 37.8
32 2.4.23 Supply of G.I union 25mm Ist Quality Each 57.7
33 2.4.24 Supply of G.I union 50mm Ist Quality Each 105.5
Supply of Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make
34 2.4.25 Each 485
heavy type- 15mm NB Size
Supply of Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make
35 2.4.26 Each 669.3
heavy type- 20mm NB Size
Supply of Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make
36 2.4.27 Each 980.9
heavy type - 25mm NB Size
Supply of Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make
37 2.4.28 Each 2993.9
heavy type - 50mm NB Size
Supply of 15mm nominal size 101.6mm CP finish iron body shower
38 2.4.29 Each 119.6
Supply of PVC low level Cistern Parryware/ Slimline with internal
12 2.4.3 components and short bend - 10 Ltrs capacity Single flush Each 1120.3
39 2.4.30 Supply of NP soap dish heavy type with NP Screws Each 124.6
13 2.4.4 Supply of internal fittings flush tank Each 631.4
Supply of polished black Kadapa slab/ stone sink of size 600mm x
450mm x 250mm and 18mm thick including supplying of CI cantilever
14 2.4.5 Each 721
brackets, 38mm dia waste coupling and 38mm dia PVC waste pipe of
0.75m long, etc., complete
Supply of Indian make Flat Back Wash Hand Basin (Hindware/ Parry
ware/ Neycer) 1st quality conforming to IS:2556 - Part-4:1972 with waste
fittings like rubber plug, chain, 32mm nominal size C.P. Fitting with
parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm
15 2.4.6 nominal bore Chromium Plated Pillar Tap of 1st quality Indian make Each 1027.2
400grams Seiko/ Senior/ Nice/ Esso or equivalent complete with
standard CI brackets including wooden block: 550x400mm - Single C.P.
Pillar Cock
Supply of Stainless Steel fly proof wire mesh of not less than 20 guage
1328 2.9 Sqm 482.3
3.EARTHWORK
SR ITEM
D DESCRIPTION UNIT RATE
NO
Earth work excavation for foundations and depositing on bank for all lifts
and with an initial lead up to 50m including all operational, incidental,
labour charges such as shoring, sheeting, planking, strutting, etc.
49 3.1.1 Cum 173.7
complete for finished item of work as per SS - 20 B (APSS 308). - Ordinary
Soil-Manual Means-Up to 3 m depth
Earth work excavation for foundations and depositing on bank for all lifts
and with an initial lead up to 50m including all operational, incidental,
labour charges such as shoring, sheeting, planking, strutting, etc.
50 3.1.2 Cum 97.5
complete for finished item of work as per SS - 20 B (APSS 308). - Ordinary
soils-Mechanical Means-Up to 3 m depth
Earth work excavation for foundations and depositing on bank for all lifts
and with an initial lead up to 50m including all operational, incidental,
labour charges such as shoring, sheeting, planking, strutting, etc.
51 3.1.3 Cum 111.5
complete for finished item of work as per SS - 20 B (APSS 308). - Ordinary
Soils-Mechanical Means-3 m to 6 m depth
Earth work excavation for foundations and depositing on bank for all lifts
and with an initial lead up to 50m including all operational, incidental,
labour charges such as shoring, sheeting, planking, strutting, etc.
52 3.1.4 Cum 248.1
complete for finished item of work as per SS - 20 B (APSS 308). - Ordinary
rock (not requiring blasting)-Manual Means - For all Depths
Earth work excavation for foundations and depositing on bank for all lifts
and with an initial lead up to 50m including all operational, incidental,
labour charges such as shoring, sheeting, planking, strutting, etc.
53 3.1.5 Cum 124.5
complete for finished item of work as per SS - 20 B (APSS 308). - Ordinary
rock (not requiring blasting)-Mechanical Means - For all Depths
Earth work excavation for foundations and depositing on bank for all lifts
and with an initial lead up to 50m including all operational, incidental,
labour charges such as shoring, sheeting, planking, strutting, etc.
54 3.1.6 Cum 405
complete for finished item of work as per SS - 20 B (APSS 308). - Hard
rock (requiring blasting) - for all Depths
SR ITEM
D DESCRIPTION UNIT RATE
NO
Cement Concrete 1:5:10 with 40 mm size Crushed Granite metal of
approved hard quality in foundations or Plinth etc., Complete. (But
78 4.1 Cum 2284.4
Excluding Cost of Cement) - with concrete mixer
Cement Concrete 1:1.5 :3 with 20mm down size (65% of 20-10mm &
35% of 10-4.75mm) graded crushed granite metal using machine mixing
90 4.1 and vibrating inclusive of shuttering/centering charges for bed blocks Cum 3932.8
and arch key for mine arches Complete (But Excluding Cost of Cement)
(CA : 0.90 Cum, FA:0.45Cum)
Cement Concrete M-20 design mix Concrete corresponding to IS 456
with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded
Crushed Granite metal of approved hard quality inclusive of shuttering
91 4.11 and centring charges for Mine Arches using concrete mixer and vibrating Cum 4753.2
etc., complete (But Excluding Cost of Cement) The Cement @
350Kg/Cum of Concrete is to be used. (CA : 0.90 Cum, FA:0.45Cum)
Cement Concrete 1:2:4 with 20mm down size (65% of 20-10mm & 35%
of 10-4.75mm) graded Crushed Granite metal of approved hard quality
for precast CC slabs for GL Bunkers including machine mixing of
Concrete, necessary shuttering finishing etc including hoisting/fixing,
92 4.12 cost and conveyance of all materials to work site, all labour charges, all Cum 2749.7
operational incidental charges etc. completed for finished item of work,
as directed. (But Excluding Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum)
Cement Concrete 1:3:6 with 40mm down size (50% of 40-20mm, 30% of
20-10mm and 20% of 10-4.75mm) graded Crushed Granite metal of
approved hard quality including machine mixing, vibrating necessary
81 4.3.2 Centering, shuttering etc., Complete for finished Item of work as Cum 2723.2
directed for Filter Bed Side Walls and Retaining walls (Excluding Cost of
Cement) (CA : 0.90 Cum, FA:0.45Cum)
Extra Lift charges for Cement Concrete 1:3:6 for Filter Bed Side Walls and
82 4.3.3 Cum 135.4
Retaining walls from 5M to 10M height
Cement Concrete 1:2:4 40mm thick for window sills/ Damp Proof Course
using 10mm size Crushed Granite metal of approved hard quality
83 4.4 Sqm 106.1
including finishing the surface smooth and level using Concrete mixer
(But Excluding Cost of Cement)
Cement Concrete 1:2:4 with 20mm down size (65% of 20-10mm & 35%
of 10-4.75mm) graded Crushed Granite metal of approved hard quality
inclusive of shuttering/centering charges for bed blocks, encasing joists/
84 4.5 Cum 3809.3
rails, holdfasts of doors and windows, etc. Complete (But Excluding Cost
of Cement) - with concrete mixer (CA : 0.90 Cum, FA:0.45Cum)
Cement Concrete 1:2:4 with 20mm down size (65% of 20-10mm & 35%
of 10-4.75mm) graded Crushed Granite metal of approved hard quality
including machine mixing, vibrating with mechanical vibrators, necessary
85 4.6 side shuttering etc., Complete for finished Item of work as directed - Cum 7730.6
Dwarf Walls for Railings, Kerb walls, dividers etc., (Excluding Cost of
Cement) (CA : 0.90 Cum, FA:0.45Cum)
Cement Concrete 1:2:4 with 20mm down size (65% of 20-10mm & 35%
of 10-4.75mm) of graded crushed granite metal of approved hard quality
for Pedastals / Beds including machine mixing, vibrating with mechanical
86 4.7 Cum 4121.1
vibrators, centering/shuttering charges, etc, Complete. (But Excluding
Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum)
Supply and fixing pre-cast cement jali 40mm thick including cost and
conveyance of all the materials to site of work, all labour charges, all
operational and incidental charges including all leads and lifts etc.,
87 4.8.1 Sqm 305.4
complete for finished item of work, as directed. (Note:- This is a bought
out Item. Contractor has to make his own arrangements for all the
materials.)
Supply and fixing pre-cast cement jali 25mm thick including cost and
conveyance of all the materials to site of work, all labour charges, all
operational and incidental charges including all leads and lifts etc.,
88 4.8.2 Sqm 235.5
complete for finished item of work, as directed. (Note:- This is a bought
out Item. Contractor has to make his own arrangements for all the
materials.)
89 4.9 Add for vibrating of concrete Cum 82.8
5.REINFORCED CEMENT CONCRETE
SR ITEM
D DESCRIPTION UNIT RATE
NO
Reinforced Cement Concrete 1:2:4 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
93 5.1.1 vibrating with mechanical vibrators, finishing, and centering/shuttering Cum 4994.8
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) - for Column Footings. (CA : 0.90
Cum, FA:0.45Cum)
Reinforced Cement Concrete 1:2:4 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
102 5.1.10 vibrating with mechanical vibrators, finishing, and centering/shuttering Cum 9564.5
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) for dwarf Walls for Railings,
parapets, corridor walls etc.,. (CA : 0.90 Cum, FA:0.45Cum)
Reinforced Cement Concrete 1:2:4 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
vibrating with mechanical vibrators, finishing, and centering/shuttering
94 5.1.2 Cum 5464.7
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) for Pedestals. (CA : 0.90 Cum,
FA:0.45Cum) (Effective length of which does not exceed 3 times the least
lateral dimension).
Reinforced Cement Concrete 1:2:4 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
95 5.1.3 vibrating with mechanical vibrators, finishing, and centering/shuttering Cum 7086.6
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) for Columns. (CA : 0.90 Cum,
FA:0.45Cum)
Reinforced Cement Concrete 1:2:4 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
96 5.1.4 vibrating with mechanical vibrators, finishing, and centering/shuttering Cum 7218
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) for Plinth Beams / Brace beams.
(CA : 0.90 Cum, FA:0.45Cum)
Reinforced Cement Concrete 1:2:4 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
97 5.1.5 vibrating with mechanical vibrators, finishing, and centering/shuttering Cum 7171.5
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) for Lintels. (CA : 0.90 Cum,
FA:0.45Cum)
Reinforced Cement Concrete 1:2:4 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
98 5.1.6 vibrating with mechanical vibrators, finishing, and centering/shuttering Cum 10196.9
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) for Sunshades. (CA : 0.90 Cum,
FA:0.45Cum)
Reinforced Cement Concrete 1:2:4 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
99 5.1.7 vibrating with mechanical vibrators, finishing, and centering/shuttering Cum 6649.3
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) for roof Beams. (CA : 0.90 Cum,
FA:0.45Cum)
Reinforced Cement Concrete 1:2:4 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
100 5.1.8 vibrating with mechanical vibrators, finishing, and centering/shuttering Cum 5713.3
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) for roof Slab. (CA : 0.90 Cum,
FA:0.45Cum)
Reinforced Cement Concrete 1:2:4 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
101 5.1.9 vibrating with mechanical vibrators, finishing, and centering/ shuttering Cum 4994.8
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) for Raft. (CA : 0.90 Cum,
FA:0.45Cum)
Providing RCM Screen wall (parada wall)/ RCM drop walls 50mm thick in
CM1:3 including steel reinforcement with 6mm dia @ 150mm c/c both
ways and Rabbit wire mesh of 24 gauge 2 layers including necessary
centering charges including cost and conveyance of all materials, all
labour charges including tying Rabbit wire mesh to the steel
150 5.1 reinforcement applying mortar lumps, finishing plastering 12mm in 2 Sqm 1723.9
coats of CM 1:4 & CM 1:2 on both faces, sponge finishing, all operational
and incidental charges, curing etc., but excluding cost of steel and its
fabrication charges and Cost of Cement) complete for finished Item of
work as directed.
Extra lift charges for RCC items including lift for centering / shuttering
151 5.11.1 charges (Floor height up to 3.66M) - For Columns - In 1st floor Cum 475.4
Extra lift charges for RCC items including lift for centering / shuttering
160 5.11.10 charges (Floor height up to 3.66M) - For Beams - In 1st floor Cum 325
Extra lift charges for RCC items including lift for centering / shuttering
161 5.11.11 charges (Floor height up to 3.66M) - For Beams - In 2nd floor Cum 650
Extra lift charges for RCC items including lift for centering / shuttering
162 5.11.12 charges (Floor height up to 3.66M) - For Beams - In 3rd floor Cum 975
Extra lift charges for RCC items including lift for centering / shuttering
163 5.11.13 charges (Floor height up to 3.66M) - For Beams - In 4th floor Cum 1300
Extra lift charges for RCC items including lift for centering / shuttering
164 5.11.14 charges (Floor height up to 3.66M) - For Roof Slabs - In 1st floor Cum 276.1
Extra lift charges for RCC items including lift for centering / shuttering
165 5.11.15 charges (Floor height up to 3.66M) - For Roof Slabs - In 2nd floor Cum 552.3
Extra lift charges for RCC items including lift for centering / shuttering
166 5.11.16 charges (Floor height up to 3.66M) - For Roof Slabs - In 3rd floor Cum 837.5
Extra lift charges for RCC items including lift for centering / shuttering
167 5.11.17 charges (Floor height up to 3.66M) - For Roof Slabs - In 4th floor Cum 1113.6
Extra lift charges for RCC items including lift for centering / shuttering
152 5.11.2 charges (Floor height up to 3.66M) - For Columns - In 2nd floor Cum 950.8
Extra lift charges for RCC items including lift for centering / shuttering
153 5.11.3 charges (Floor height up to 3.66M) - For Columns - In 3rd floor Cum 1426.2
Extra lift charges for RCC items including lift for centering / shuttering
154 5.11.4 charges (Floor height up to 3.66M) - For Columns - In 4th floor Cum 1901.6
Extra lift charges for RCC items including lift for centering / shuttering
155 5.11.5 charges (Floor height up to 3.66M) - For Columns - In 5th floor Cum 2377.7
Extra lift charges for RCC items including lift for centering / shuttering
156 5.11.6 charges (Floor height up to 3.66M) - For Lintels - In 1st floor Cum 408.6
Extra lift charges for RCC items including lift for centering / shuttering
157 5.11.7 charges (Floor height up to 3.66M) - For Lintels - In 2nd floor Cum 817.2
Extra lift charges for RCC items including lift for centering / shuttering
158 5.11.8 charges (Floor height up to 3.66M) - For Sunshades - In 1st floor Cum 534.3
Extra lift charges for RCC items including lift for centering / shuttering
159 5.11.9 charges (Floor height up to 3.66M) - For Sunshades - In 2nd floor Cum 1079.4
Reinforced Cement Concrete 1:1.5:3 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
vibrating with mechanical vibrators, finishing, and centering/ shuttering
104 5.2.2 Cum 5464.7
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for
pedastels. (Effective length of which does not exceed 3 times the least
lateral dimension).
Reinforced Cement Concrete 1:1.5:3 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
105 5.2.3 vibrating with mechanical vibrators, finishing, and centering/ shuttering Cum 7086.6
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for
Columns.
Reinforced Cement Concrete 1:1.5:3 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
106 5.2.4 vibrating with mechanical vibrators, finishing, and centering/ shuttering Cum 7218
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for
Plinth Beams / Brace beams.
Reinforced Cement Concrete 1:1.5:3 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
107 5.2.5 vibrating with mechanical vibrators, finishing, and centering/ shuttering Cum 7171.5
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for
Lintels.
Reinforced Cement Concrete 1:1.5:3 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
108 5.2.6 vibrating with mechanical vibrators, finishing, and centering/ shuttering Cum 10196.9
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for
Sunshades.
Reinforced Cement Concrete 1:1.5:3 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
109 5.2.7 vibrating with mechanical vibrators, finishing, and centering/ shuttering Cum 6649.3
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for
roof Beams.
Reinforced Cement Concrete 1:1.5:3 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
110 5.2.8 vibrating with mechanical vibrators, finishing, and centering/ shuttering Cum 5713.3
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for
roof slabs.
Reinforced Cement Concrete 1:1.5:3 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded Crushed Granite metal from
approved quarry including cost and conveyance of all materials like sand,
coarse aggregate, water etc., to site and including machine mixing and
111 5.2.9 vibrating with mechanical vibrators, finishing, and centering/ shuttering Cum 4994.8
charges, etc, (but excluding cost of steel reinforcement and its
fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for
Raft.
Reinforced Cement Concrete 1:2:4 with 20mm down size (65% of 20-
10mm & 35% of 10-4.75mm) graded crushed granite metal of approved
hard quality for precast RCC slabs, purlins, verandah posts, fencing posts
etc. including machine mixing of Concrete, necessary shuttering,
finishing etc including hoisting/fixing, cost and conveyance of all
147 5.7 Cum 4827.7
materials to work site, all labour charges, all operational incidental
charges (excluding cost of steel and its fabrication charges and cost of
cement) etc. complete for finished item of work, as directed. (CA : 0.90
Cum, FA:0.45Cum)
Providing and fixing of RCC 1:2:4 precast shelves 37mm thick with 6mm
dia MS reinforcement at 125mm C/C both ways with 10mm size crushed
granite metal of approved hard quality (without brackets) including
148 5.8 necessary centering charges and plastering with CM 1:3, 12mm thick Sqm 250.5
etc., (but excluding cost of steel and Cost of Cement) complete as
directed. (Cost of Fabrication of Reinforcement included)
Providing and fixing of RCC 1:2:4 precast shelves 25mm thick with 6mm
dia MS reinforcement at 125mm c/c both ways with 10mm size crushed
granite metal of approved hard quality without brackets, including
149 5.9 necessary centering charges and plastering with CM 1:3, 12mm thick Sqm 219
etc., but excluding cost of steel and Cost of Cement) complete as
directed. (Cost of Fabrication of Reinforcement included)
6.STONE MASONRY
SR ITEM
D DESCRIPTION UNIT RATE
NO
Uncoursed rubble stone masonry with approved hard quality stone of
174 6.1 other than granite variety stone in CM 1:6 in foundations/ Basement ( Cum 2299.9
But Excluding Cost of Cement)
Coursed rubble stone masonry with approved hard quality stone of other
than granite variety stone in CM 1:6 in foundations/Basement /
175 6.2.1 Cum 2643.8
Substructure up to 600mm thick second sort (But Excluding Cost of
Cement)
Coursed rubble stone masonry with approved hard quality stone of other
than granite variety stone in CM 1:6 in foundations/Basement /
176 6.2.2 Cum 2307.6
Substructure above 600mm thick second sort (But Excluding Cost of
Cement)
Coursed rubble stone masonry with approved hard quality of other than
granite stone in CM 1:6 upto 600mm thick for superstructure including
177 6.3.1 Cum 2945.7
scaffolding, curing etc, (But Excluding Cost of Cement) complete.
Coursed rubble stone masonry with approved hard quality of other than
granite stone in CM 1:6 above 600mm thick for superstructure including
178 6.3.2 Cum 2571.3
scaffolding, curing etc, (But Excluding Cost of Cement) complete.
Coursed rubble stone masonry with approved hard quality of other than
granite stone in CM 1:6 in circular constructions for superstructure
179 6.3.3 Cum 3395
including scaffolding, curing etc, (But Excluding Cost of Cement)
complete.
Extra lift charges for Stone Masonry items including lift for centering /
180 6.4.1 shuttering charges (Floor height up to 3.66M) - From 3.66M to 7.32M Cum 289.6
Height (For 0.45M Thick)
Extra lift charges for Stone Masonry items including lift for centering /
181 6.4.2 shuttering charges (Floor height up to 3.66M) - From 7.32M to 10.98M Cum 579.2
Height (For 0.45M Thick)
Extra lift charges for Stone Masonry items including lift for centering /
182 6.4.3 shuttering charges (Floor height up to 3.66M) - From 3.66M to 7.32M Cum 267.6
Height (For 0.60M Thick)
Extra lift charges for Stone Masonry items including lift for centering /
183 6.4.4 shuttering charges (Floor height up to 3.66M) - From 7.32M to 10.98M Cum 535.2
Height (For 0.60M Thick)
7.BRICK MASONRY
SR ITEM
D DESCRIPTION UNIT RATE
NO
Flyash Brick masonry with bricks of size 225x100x60mm with 50kg/cm2
Compressive strength in C.M.1:6 for superstructure including scaffolding
184 7.1 Cum 4425.3
etc., (But Excluding Cost of Cement ) complete.
Construction of Flyash brick masonry drain with bricks of size 225x 100 x
60mm with 50Kg/cm2 compressive strength 300mm wide and 300mm
deep with brick work in CM 1:6, with 225mm thick with brick walls,
including excavation, and laying of 100mm thick and 1050mm wide CC
193 7.1 RM 975.8
1:5:10 bed, with 40 mm Crushed Granite metal, plastering the surfaces
with CM 1:6; 12mm thick including finishing smooth with trowel etc., (
But Excluding Cost of Cement ) complete.
Binding wall 225 x 225mm size with brick in cement mortar 1:6 with fly
ash bricks of compressive strength 50Kg/cm2 with 20mm thick plastering
194 7.11 RM 409.6
with cement mortar 1:6, with cornice 100x 100mm ( But Excluding Cost
of Cement )
Binding wall 225 x 225mm size with brick in cement mortar 1:6 with fly
ash bricks of compressive strength 50Kg/cm2 with 20mm thick plastering
195 7.12 RM 332.2
with cement mortar 1:6, with out cornice (But Excluding Cost of Cement
)
Providing coping with fly ash brick masonry with bricks of 50 Kg/Sq.Cm.
compressive strength over 225 mm thick brick walls with 340x340mm
square pillars up to 3m c/c with brick in CM1:6 over the entire length
196 7.13 including pillar portion and plastering the sides and bottom with cement Cum 5455.4
mortar 1:6,12mm thick , and top with 12mm thick at ends & 20mm thick
at center etc., ( But Excluding Cost of Cement ) complete:
Providing and fixing 25mm Nominal bore 300mm long G.I Pipe ( Medium
duty) outlet in CM 1:3, with wiremesh fixed inside including cutting and
making good the wall, cutting of GI pipes and including cost and
197 7.14 conveyance of all materials to site, all labour charges, all operational and Each 126.4
incidental charges etc., complete for finished item of work, as directed
(Excluding Cost of Cement )
Extra lift charges for Brick Masonry items including lift for centering /
198 7.15.1 shuttering charges (Floor height up to 3.66M) - In 1st floor Cum 311.4
Extra lift charges for Brick Masonry items including lift for centering /
199 7.15.2 shuttering charges (Floor height up to 3.66M) - In 2nd floor Cum 622.8
Extra lift charges for Brick Masonry items including lift for centering /
200 7.15.3 shuttering charges (Floor height up to 3.66M) - In 3rd floor Cum 934.2
Flyash Brick masonry with solid blocks of size 290x225x140mm with
50kg/cm2 Compressive strength in C.M.1:6 for superstructure including
185 7.2 Cum 4331.4
scaffolding etc., (But Excluding Cost of Cement ) complete.
Flyash Brick masonry with bricks of size 225x100 x60 mm with 50kg /cm2
Compressive strength in C.M.1:4 for superstructure including scaffolding
187 7.4 Sqm 573.4
etc., (But Excluding Cost of Cement ) complete. For 100mm walls
Flyash Brick masonry with blocks of size 290x100 x140 mm with 50kg
/cm2 Compressive strength in C.M.1:4 for superstructure including
189 7.6 Sqm 679.8
scaffolding etc., (But Excluding Cost of Cement ) complete. For 100mm
walls
Reinforced Flyash Brick masonry with blocks of size 290x100 x140 mm
with 50kg / cm2 Compressive strength in C.M.1:4 and using two mild
steel bars of 6mm dia in every alternate layer of brick masonry, with free
190 7.7 joints in to the main block work for superstructure including scaffolding, Sqm 694.3
and fabrication charges of steel etc., (But Excluding Cost of Cement and
cost of steel ) complete. For 100mm walls
Construction of Flyash brick masonry drain with bricks of size 225x 100 x
60mm with 50Kg/cm2 compressive strength 150mm wide and 150mm
deep with brick work in CM 1:6, with 225mm thick with brick walls,
including excavation, and laying of 100mm thick and 750mm wide CC
191 7.8 RM 584.5
1:5:10 bed, with 40 mm Crushed Granite metal, plastering the surfaces
with CM 1:6; 12mm thick including finishing smooth with trowel etc., (
But Excluding Cost of Cement ) complete.
Construction of Flyash brick masonry drain with bricks of size 225x 100x
60mm with 50Kg/cm2 compressive strength 225mm wide and 225mm
deep, with brick work in CM1:6, with 225mm thick brick walls ,including
excavation and laying of 100mm thick and 838mm wide CC1:5:10 bed,
192 7.9 RM 786.2
with 40 mm Crushed Granite metal, plastering the surfaces with CM
1:6;12mm thick including finishing smooth with trowel etc., (But
Excluding Cost of Cement) complete.
8.PITCHING
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Providing and constructing 25 cm thick dry rubble stone pitching with pin
headers at 2 per sqm with granite stone chips including cost of all
201 8.1 Sqm 155.9
materials, labour, hand packing, finishing etc., complete with initial lead
upto 50 m and all lifts.
Providing and constructing 30 cm thick dry rubble stone pitching with pin
headers at 2 per sqm with granite stone chips including cost of all
202 8.2 Sqm 183.9
materials, labour, hand packing, finishing etc., complete with initial lead
upto 50 m and all lifts.
Labour charges for formation of rock toe wall with Companys Rubble
stone with initial lead of 50m and all lifts including all operational and
203 8.3 Cum 125
incidental charges etc., complete as directed by the Engineer-in-charge.
200mm thick Fly ash Brick pitching / Flooring with 400mm x 200mm
x200mm Fly ash bricks and pointing the same with CM 1:3 including cost
1262 8.5 and conveyance of all materials, labour charges etc., complete for Sqm 426
finished item of work with all leads and lifts (But excluding cost of
cement)
9.POINTING
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Flush pointing to stone masonry / stone pitching with Cement mortar 1:4
205 9.1 including raking out of joints ( But Excluding Cost of Cement ) Sqm 65.4
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Plastering to brick masonry with cement mortar 1:6, 12mm thick
207 10.1 Sqm 108.1
including raking out of joints ( But Excluding Cost of Cement )
Grouting of cracks in walls with CM 1:4, 40mm wide and 25mm deep for
216 10.1 RM 35.2
finished Item of work ( But Excluding Cost of Cement )
Supply and fixing of Rabbit wire mesh for Wall junctions at RCC columns/
beams or repair of RCC members with necessary nails/ binding wire
217 10.11 complete, including cost and conveyance of all materials, labour charges Sqm 69.9
etc., complete for finished item of work as directed by the Engineer-in-
charge.
Pebble dash exterior plaster on walls (up to a height of 10m above
ground level) with a mixture of washed pebble or crushed stone granite
from 6mm to 12mm nominal size dashed over and including fresh
cement plaster in two coats, backing coat 10mm cement plaster 1:3
(1cement :3sand ) and finishing coat 10mm cement plaster 1:3 (1cement
218 10.12 Sqm 339.4
: 3sand ) mixed with 10% finely grounded hydrated lime by volume of
cement including arrises, chamfers and or rounded angles not exceeding
80mm in girth including necessary scasffolding, watering etc., complete
(but excluding cost of Cement)
Extra for Labour charges for providing 20mm wide groves in plastering
219 10.13 including finishing the surface complete as directed by the Engineer RM 30.2
incharge
Extra Lifts for plastering materials including Scaffolding charges - In 1st
220 10.14.1 Sqm 12.3
floor
Extra Lifts for plastering materials including Scaffolding charges - In 2nd
221 10.14.2 Sqm 24.6
floor
Extra Lifts for plastering materials including Scaffolding charges - In 3rd
222 10.14.3 Sqm 37
floor
Plastering to brick masonry with cement mortar 1:4, 12mm thick
208 10.2 Sqm 108.1
including raking out of joints ( But Excluding Cost of Cement )
Plastering 15 mm thick Two Coats with Base Coat of 11mm thick in
cement mortar 1:6; and top coat of 4mm thick in CM 1:4 with sponge
209 10.3 Sqm 221.2
finishing etc., ( But Excluding Cost of Cement ) Complete for walls only
Plastering to Ceiling with cement mortar 1:3, 12mm thick ( But Excluding
212 10.6 Sqm 119
Cost of Cement )
20 mm thick plain cement mortar bands in cement mortar 1:4 up to 300
213 10.7 mm in width for elevations and drip moulds etc.,- Raised Band ( But Sqm 437.9
Excluding Cost of Cement )
Providing gultha in CM 1:6 ,20 mm thick in two coats ,150 mm wide
214 10.8 including necessary scraping of wall and finishing the surface as directed RM 23.5
( But Excluding Cost of Cement )
Fine rendering with White cement over existing plastered surface for
Dadooing of Bath room walls including cost and conveyance of all the
materials to site of work, all labour charges, all operational and
215 10.9 Sqm 91.1
incidental charges, etc., complete for finished item of work, as
directed.(Quantity of White Cement to be used not less than
2.16Kg/Sqm)
11.PITCHED ROOF
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Roofing/Side sheeting with A.C corrugated sheets 6mm thick including
cost and conveyance of AC Sheets, 8mm dia J bolts,GI washers, bitumen
washers and labour charges including fixing of wind ties as per the
223 11.1 Sqm 315.6
requirement etc., complete (with /without Ridges / Valley gutters) for
finished item of work (cost of wind ties and its fabrication charges are
not included)
Labour charges for fixing AC sheets for Roofing/Side sheeting including
cost of 8mm dia J bolts & nuts, Bitumen washers, 8mm dia plain GI
224 11.2 washers including fixing of wind ties as per the requirement etc., (with Sqm 74.7
/without Ridges) complete for finished Item of work
Labour Charges for G.I Sheets for Roofing/Side sheeting including Cost of
Necessary number of 8mm dia J Bolts, Bitumen and G.I washers, Nuts
226 11.4 etc.,With Or Without Ridges, valley gutters including fixing of wind ties Sqm 171.9
as per the requirement etc., complete for finished item of work
Add extra for A.C Sheet / GI Sheet roofing, side Sheeting above 5m and
229 11.7.1 Sqm 12.4
up to 10m height
Add extra for A.C Sheet / GI Sheet roofing, side Sheeting above 10m and
230 11.7.2 Sqm 24.8
up to 15m height
Add extra for A.C Sheet / GI Sheet roofing, side Sheeting above 15m
231 11.7.3 Sqm 37.1
height up to 20m
Dismantling G.I sheets, AC Sheets in Sides and Roof including ridging
232 11.8 Sqm 51.4
etc.,
Roofing/side sheeting with Pre-Painted Galvalume sheets of thickness
0.50mm PPGL AZ150, 550 MPA YS fixed with Suitable bolts, nuts, &
washers, including fixing of wind ties as per the requirement etc., &
233 11.9 including cost and conveyance of all materials etc., complete (with / Sqm 552.7
without Ridges/ valley gutters) for finished Item of work as directed.
(cost of wind ties and its fabrication charges are not included)
12.CEILING & WATER PROOFING
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Providing and fixing Thermocole False ceiling 600mm x 600mm using
19mm thick Thermocole sheet, anodised Aluminium Tee sections of size
24.50mm x 24.0mm x 2.4mm in grid with cross tee of size 24mm x
24.5mm x 2.4mm at every 600mm c/c and anodised aluminium wall
angle of size 24mm x 24mm x 2.4mm fixed to periphery of the wall and
234 12.1 Sqm 493.9
the above grid is suspended at every 1200mm c/c in both directions
using 2.0mm thick GI Wire including cost and conveyance of all materials
to site etc., for finished item of work as directed. Holding down clips to
be used for fixing thermocole sheets.
Extra Lifts including Scaffolding charges for water proofing and False
245 12.11.1 Sqm 12.3
ceiling - In 1st floor
Extra Lifts including Scaffolding charges for water proofing and False
246 12.11.2 Sqm 24.6
ceiling - In 2nd floor
Extra Lifts including Scaffolding charges for water proofing and False
247 12.11.3 Sqm 37
ceiling - In 3rd floor
248 12.12 Supply of 19 mm thick Thermocole sheets Sqm 37.5
Supplying and fixing Gyp Board Suspended regular single layer false
ceiling (GS-MFSC-4.1as per India Gypsum) using 12.5mm thick Gyp Board
conforming to IS 2095-1993 fixing to Gyp steel GI perimeter channels of
size 20mm x27mm x30mm(web) of 0.55mm thick screws fixed to brick
work/ partition at 610mm c/c and suspending the frame work using
Intermediate channels (45mm x15mm x15mm x0.9mm) from soffit at
1220mm c/c with ceiling angle (25mm x10mm x0.55mm) fixed with GI
Cleat and steel expansion fasteners & connecting clip to the ceiling
channels (with knurled web of 51.5mm x26mm x10.5mm x0.55mm)
235 12.2.1 Sqm 858.2
fixed in direction perpendicular to the intermediate channel at 457mm
c/c and fixing the 12.5mm tapered edge Gypboard with 25mm drywall
screws at 230mm c/c & jointing and finishing using joint compound and
paper tape to have a flush look including filling the tapered & square
edges with jointing compound, two coats of drywall topcoat complete
for finished item of work as per India Gypsum Ltd specification. - For Flat
Surfaces
236 12.2.2 Add Extra for Cornice / Raised Surfaces Sqm 160.1
Providing and fixing 600mm x600mm, 15mm thick Arm strong false
ceiling system manufactured by M/s Arm strong world Industries using
hot dipped Galvanised Steel section exposed surface with pre-coated
capping, main Tee of size 24x32mm at every 1200mm c/c maximum and
rotary stitched cross tee of size 24x27mm at evry 600mm c/c and sub-
cross tee of size 24mm x25mm at 1200mm c/c and wall angle of size
19x19mm fixed to periphery of the wall and the above grid is suspended
237 12.3 Sqm 1086.6
at every 1200mm c/c in both directions using 2.0 mm thick pre-
straightened GI Wire laying fine fissured butt edge ceiling tiles of 15mm
thick mineral fibre Board for finished size 600x600mm including Cost
&conveyance of all materials and labour charges such as cutting, fixing of
standing of frame work exposing roof making complete for finished item
of work
Providing Tar Felting roof repair with Approved Make Tar Felt duly
applying one coat of appropriate grade of bitumen in hot condition @
1.2 Kg/1 Sqm of roof area, fixing tar felt (Conforming to IS 1322-1972
specification), applying second coat of appropriate grade of hot bitumen
238 12.4 Sqm 265.8
at 1.20 Kg / 1 Sqm of roof area and spreading course aggregate (sand) at
0.0063 cum per Sqm roof area finished item including all taxes. (Bitumen
used shall be of 30/40 grade)
Labour charges for removing the damaged Tarfelt sheet from roofs and
239 12.5 Sqm 23.9
disposing the same as directed:-
Plastering with CM 1:4, 20mm thick over flat roofs, before applying
240 12.6 Sqm 149.4
tarfelting (But Excluding Cost of Cement )
Providing impervious coat 20mm average thickness in 2 coats for CRS
walls etc., with CM1:3, mixed with Approved Make of water proofing
compound at the rate of 1Kg per bag of cement in 2nd coat and
rendering smooth, rounding off junctions of walls as directed including
241 12.7 Sqm 155
cost and conveyance of all materials and water etc., and operational,
incidental, Labour charges etc., ( But Excluding Cost of Cement )
complete for finished item of work.
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Flooring with Shahabad / Tandur Rough stone slabs minimum of 25 mm
thick stones of uniform size on a layer of sand bed of 37 mm thick set
over a base coat of CM 1:8 of 12mm thick layer including pointing with
CM 1:3 duly filling joints neatly, dressing of flooring stones etc., and
249 13.1 Sqm 593
including cost and conveyance of all materials, labour charges etc.,
complete for finished item of work.( Rate includes lead of Shabad /
Tandur stone slabs to site of work) ( But Excluding Cost of Cement )
259 13.10.1 Lift charges for all stone floorings and skirtings - In First floor Sqm 29
260 13.10.2 Lift charges for all stone floorings and skirtings - In Second floor Sqm 57.9
Labour charges for flooring with companys Shahabad / Tandur stone
slabs on a layer of sand bed of 37 mm thick set over a base coat of CM
1:8 of 12mm thick layer including pointing with CM 1:3 duly filling joints
neatly, dressing of flooring stones etc., and including cost and
261 13.11 Sqm 371.3
conveyance of all materials, labour charges etc., complete for finished
item of work.(Rate EXcludes Cost of Shabad / Tandur stone slabs) (But
Excluding Cost of Cement )
Rounding the edges of Cuddaph slabs and Shahabad stone slabs of any
252 13.4 RM 141.8
thickness including polishing the same
Half Rounding the edges of Marble/Granite stone slabs of all thicknesses
253 13.5.1 RM 429.5
including polishing the same
Full Rounding the edges of Marble/Granite stone slabs of all thicknesses
254 13.5.2 RM 556.3
including polishing the same
Flooring with Polished Marble slab of any variety such as
Dongiri/Adanga/ Marodh/ Rajganpur etc., of 16 to 20mm (average)
thickness size (0.457m x 0.457m or 0.60m x 0.60m) with uniform in
colour and shade on the existing base concrete already laid or RCC roof
slab, set over base coat of 20mm thick CM 1:6 (joints of stone must be
flushed ), including neat cement slurry of honey like consistency spread
255 13.6 Sqm 1476.1
@ 3.3Kgs per sqm and jointed with neat cement to full depth mixed with
pigment of matching shade, dressing, rubbing and polishing of flooring
stones, etc., and including cost and conveyance of all materials, labour
charges etc., complete for finished item of work as directed (But
Excluding Cost of Cement).
Supply and fixing minimum of 15mm thick polished Black Kadapa single
slab of required size as directed by the Engineer-in-charge with exposed
faces square cut and well polished, over 12mm thick CM 1:4 base coat
on existing Concrete, with grey Cement Slurry of honey like consistency
spread at the rate of 3.30Kg./Sqm. including cost and conveyance all
257 13.8 materials and water to work site and cost of base coat, all operational, Sqm 227.4
incidental, labour charges such as mixing mortar, dressing and fixing of
stones in position rubbing curing etc., complete for kitchen platforms /
window sills as directed (But Excluding Cost of Cement)
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Flooring 30mm thick with CC 1:2:4 using 10mm size crushed granite
metal of approved hard quality on existing concrete base, rendering
262 14.1 Sqm 165.5
smooth complete. ( But Excluding Cost of Cement )
Flooring 40mm thick with CC1:2:4 using 20mm Down size ( 65% of 20-
10mm and 35% of 10 - 4.75mm ) graded crushed granite metal of
263 14.2 Sqm 193.9
approved hard quality on existing concrete base, rendering smooth
complete. ( But Excluding Cost of Cement )
Flooring 50 mm thick with CC 1:2:4 using 20mm Down size (65% of 20-
10mm and 35% of 10 - 4.75mm) graded crushed granite metal of
264 14.3 Sqm 218.8
approved hard quality on existing concrete base, rendering smooth
complete. (But Excluding Cost of Cement )
Flooring 100mm thick with CC 1:2:4using 20mm Down size (65% of 20-
10mm and 35% of 10 - 4.75mm) graded crushed granite metal of
265 14.4 approved hard quality on existing concrete base, rendering smooth and Sqm 424.5
including shuttering charges complete. ( But Excluding Cost of Cement )
Providing plinth protection work with 50mm thick CC 1:3:6 using 20mm
Down size (65% of 20-10mm and 35% of 10 - 4.75mm) graded Crushed
granite metal together with a bed of 75mm thick CC 1:5:10 using 40mm
Crushed granite metal well rammed, consolidated including finishing the
top smooth duly maintaining the required slopes to drain off water as
267 14.6 per site conditions including cost and conveyance of all materials to site Sqm 390.1
of work, all labour, operational, and incidental charges and necessary
side support for concrete while laying etc., complete for finished item of
work (to a total thickness of 125mm). ( But Excluding Cost of Cement )
using Machine mixing
Providing ironite surface hardener topping 30mm thick with Kironite or
equivalent Approved Makes, on existing concrete base firstly Cement
and ironite surface hardeners are to be mixed in proportion at 4:1 by
weight. then this mix is to be mixed with 6mm size crushed granite chips
in the proportion of 1:2 by volume (i.e 1 part of cement and ironite
268 14.7 hardener mix to 2 parts of 6mm size crushed granite chips. The mix is to Sqm 404.5
be added to the required quantities of water and laid over the cement
concrete base. The surface is to be consolidated/rammed and finished
smooth as directed by engineer in charge (But Excluding Cost of Cement
)
15.TILED FLOOR AND DADO
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Flooring with Non-skid Ceramic floor tiles of size 400 x 400 mm and
thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712,
IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs,
set over base coat of cement mortar (1:6), 12 mm thick over CC bed
already laid or RCC roof slab, including neat cement slurry of honey like
269 15.1 consistency spread @ 3.3.kgs per sqm & jointed neatly with white Sqm 843
cement paste to full depth mixed with pigment of matching shade,
including cost and conveyance of all materials, labour charges etc.,
complete for finished item of work, (But Excluding Cost of Cement )
Flooring with Nano polished /stain free vitrified tiles screen printed of
size 600 x 600 mm and thickness between 8-10 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour
and finish in all shades and designs, set over base coat of cement mortar
(1:6), 12 mm thick over CC bed already laid or RCC roof slab, including
neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm &
273 15.5.1 Sqm 861.5
jointed neatly with white cement paste to full depth mixed with pigment
of matching shade, including cost and conveyance of all materials, labour
charges etc., complete for finished item of work, (But Excluding Cost of
Cement ) Note :- The same rate is applicable for Skirting / Risers
Flooring with Nano polished /stain free vitrified tiles screen printed of
size 800 x 800 mm and thickness between 8-10 mm 1st quality
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour
and finish in all shades and designs, set over base coat of cement mortar
(1:6), 12 mm thick over CC bed already laid or RCC roof slab, including
neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm &
274 15.5.2 Sqm 1392.2
jointed neatly with white cement paste to full depth mixed with pigment
of matching shade, including cost and conveyance of all materials, labour
charges etc., complete for finished item of work, (But Excluding Cost of
Cement ) Note :- The same rate is applicable for Skirting / Risers
Flooring with Double charged / multi charged stain free vitrified tiles
with double layer pigment of size 600 x 600 mm and thickness between
8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1
to 15) of any colour and finish in all shades and designs, set over base
coat of cement mortar (1:6), 12 mm thick over CC bed already laid or RCC
roof slab, including neat cement slurry of honey like consistency spread
275 15.6.1 Sqm 1222.7
@ 3.3.kgs per sqm & jointed neatly with white cement paste to full
depth mixed with pigment of matching shade, including cost and
conveyance of all materials, labour charges etc., complete for finished
item of work, (But Excluding Cost of Cement ) Note :- The same rate is
applicable for Skirting / Risers
Flooring with Double charged / multi charged stain free vitrified tiles
with double layer pigment of size 800 x 800 mm and thickness between
8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1
to 15) of any colour and finish in all shades and designs, set over base
coat of cement mortar (1:6), 12 mm thick over CC bed already laid or RCC
roof slab, including neat cement slurry of honey like consistency spread
276 15.6.2 Sqm 1463.4
@ 3.3.kgs per sqm & jointed neatly with white cement paste to full
depth mixed with pigment of matching shade, including cost and
conveyance of all materials, labour charges etc., complete for finished
item of work, (But Excluding Cost of Cement ) Note :- The same rate is
applicable for Skirting / Risers
Flooring with Non-skid Ceramic floor tiles of size 400 x 400 mm and
thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712,
IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs
for required areas using different sizes, approved colour and make, fixing
277 15.7 with epoxy emulsion grout/ synthetic / resin adhesive in width of 3-5 Sqm 865.9
mm with Nylon spacers of Specified thickness with out joint, including
cost and conveyance of all materials, labour charges etc., complete for
finished item of work,
278 15.8.1 Lift charges for all Tiled floorings and skirtings - In First floor Sqm 33.9
279 15.8.2 Lift charges for all Tiled floorings and skirtings - In Second floor Sqm 67.9
Providing and Laying of high strength Cement Concrete interlocking
Regular Pavers of 60 mm thickness of M- 35 Grade of which top 12 mm
280 15.9 thick shall be for colour pigmentation with imported colours and white Sqm 601.5
cement to get required reflective glazing (Sand bed is to be measured
and paid separately)
16.WOOD WORK DRESSED & FRAMED
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Labour charges for Medium teak wood wrought and putup for making in
281 16.1 to useful sizes / items with available wood with contractors nails Cum 14534.2
Supply and fixing 37mm thick panelled door shutters with Medium teak
wood with bottom rail 150mm, lock rail 125mm, top rail, freiz rail and
styles 100mm wide, panels of 25mm thick including the following
Aluminium anodised fittings of approved make, including necessary
screws, bolts /nuts etc., complete for finished item of work, as directed -
290 16.1 Single Shutter a) 3 nos. 150mm long butt hinges with screws complete. Sqm 6417.8
b) 1 no. tower bolts 200 to 250mm long of 10mm dia rods shoot with
screws complete. c) 2 nos. aldrop 300 mm long of 16 mm dia rod. d) 2
nos. grip handles 100 to 150mm long. e) 1no. Door stopper
Supply and fixing 30mm thick panelled door shutters with Medium Teak
wood bottom rail 150mm wide, lock rail 125mm wide, top rail, freeze rail
and styles 100mm wide, panels of 20mm thick including the following
Aluminium anodised fittings of approved make, including necessary
screws, bolts, nuts etc., complete for finished item of work as directed. -
Single Shutter a) 3 nos. 150mm long butt hinges with screws complete b)
291 16.11 Sqm 5311.3
1 no. tower bolts 200 to 250mm long of 10mm dia rods shoot with
screws complete. c) 1 no. aldrop 300 mm long of 16 mm dia rod d) 2 nos.
grip handles 100 to 150mm long. e) 1 no. Medium teak wood cleat with
75mm hinges with screws etc.,
Supply and fixing 30mm thick panelled door shutters with Non teak
wood with bottom rail 150mm wide, lock rail 125mm wide, top rail,
freeze rail and styles 100mm wide, panels of 20mm thick including the
following MS powdered coated fittings of approved make, including
necessary screws, bolts, nuts etc., complete for finished item of work as
292 16.12 directed. - Double Shutter a) 3 nos. 150mm long butt hinges with screws Sqm 3092.8
complete b) 1 no. tower bolts 200 to 250mm long of 10mm dia rods
shoot with screws complete. c) 1 no. aldrop 300 mm long of 16 mm dia
rod d) 2 nos. grip handles 100 to 150mm long. e) 1 no. Medium teak
wood cleat with 75mm hinges with screws etc.,
Supply and fixing Flush door shutters, solid bond wood block board type
with teak ply on both faces.: 35 mm thick conforming to IS:2202 as per
approved brand, including the following Aluminium anodised fittings :
conforming to relevant IS standards of approved make : Single Shutter a)
3 nos. 150mm long butt hinges with screws complete. b) 1 no. tower
293 16.13 Sqm 3464.7
bolts 200 to 250mm long of 10mm dia rods shoot with screws complete.
c) 2 nos. aldrop 300 mm long of 16 mm dia rod. d) 2 nos. grip handles
100 to 150mm long. e) 1 no. foot door stopper with brass clip.
Supply and fixing Flush door shutters, solid bond wood block board type
with teak ply on both faces.: 30 mm thick conforming to IS:2202 as per
approved brand, including the following Aluminium anodised fittings :
conforming to relevant IS standards of approved make: Single Shutter a)
294 16.14 3 nos. 150mm long butt hinges with screws complete. b) 1 no. tower Sqm 3156.8
bolts 200 to 250mm long of 10mm dia rods shoot with screws complete.
c) 2 nos. aldrop 300 mm long of 16 mm dia rod. d) 2 nos. grip handles
100 to 150mm long. e) 1no. Foot Door stopper
Supply and fixing Flush door shutters, solid bond wood block board type
with commercial ply on both faces.: 30 mm thick conforming to IS: 2202
as per approved brand with the following M.S. Powder Coated fittings of
approved make : Single Shutter a) 3 nos. 150mm long butt hinges with
295 16.15 screws complete. b) 1 no. tower bolts 200 to 250mm long of 10mm dia Sqm 2019.9
rods shoot with screws complete. c) 2 nos. aldrop 300 mm long of 16
mm dia rod. d) 2 nos. grip handles 100 to 150mm long. e) 1no. Foot Door
stopper
Supply and fixing Moulded panel solid core flush doors using water-
resistant hardwood fibre HDF / MDF fibre boards skins of 2.5 mm thick
of 30 mm thick with following Aluminium anodised fittings : - Single
Shutter a) 3 nos. 150 mm long butt hinges. b) 2 nos. 200 mm to 250 mm
299 16.19 Sqm 2751.8
long tower bolt with 10mm dia shoot. c) 1 no.of 300mm long aldrop with
16mm dia shoot. d) 2 no. 100 mm to 150 mm long grip handle. e) 1 no.
foot door stopper.
Labour charges for Non teak wood wrought and putup for making in to
282 16.2 useful sizes / items with available wood with contractors nails etc Cum 9411.6
Supply and fixing Moulded panel solid core flush doors using water-
resistant hardwood fibre HDF / MDF fibre boards skins of 2.5 mm thick
of 35 mm thick with following Aluminium anodised fittings - Single
Shutter a) 2no.of 300mm long aldrop with 16mm dia shoot. b) 1 nos. 200
300 16.2 Sqm 2919.6
to 250mm mm long tower bolt with 10mm dia shoot. c) 2 no. 100 mm to
150 mm long grip handle. d) 3 nos.150 mm long butt hinges. e) 1 no.
foot door stopper.
Supply and fixing of door frame made of hollow extruded PVC section
having dimensions of 40 X 57mm with the wall thickness of 2mm +/-
0.2mm duly reinforced with seasoned wood plank at the hinges side. The
301 16.21 RM 233.7
door frame top 2 corners shall be metri-cut/ welded. PVC DOOR FRAME
as per Approved Make
Supply and fixing of door shutters made of rigid PVC extruded hollow
section of 20x200mm with the wall thickness of 1.00mm +/- 0.1mm
equally divided into 4nos with tongue and groove locking arrangements.
The shutter frame is made of 30 x79mm with the wall thickness of
1.5mm +/- 0.15mm section mitre-cut and joined at 4 corners with
125x225mm plastic brackets. The shutter shall be horizontally reinforced
with 2 nos of 8mm PVC rods. Teak wood batons shall be reinforced
302 16.22 inside the door shutter during the fabrication of the door shutter at Sqm 2010.9
those points wherever the hardware is fixed on to the door shutter and
including the Following MS Powder coated fittings - PVC DOOR SHUTTER
: Single Shutter as per Approved Make a) 1no.of 200mm long aldrop with
16mm dia shoot. b) 2 nos. 200 mm long tower bolt with 10mm dia
shoot. c) 2 no. 100 mm to 150 mm long grip handle. d) 3 nos.100 mm
long butt hinges.
Supply and fixing of door frame made of hollow extruded PVC section
having dimensions of 40x46 mm with the wall thickness of 2mm +/-
0.2mm duly reinforced with seasoned wood plank at the hinges side. The
303 16.23 RM 184
door frame top 2 corners shall be mitre cut/welded including all taxes
complete, for finished item of work. as per Approved Make
Providing and fixing PVC Door Frame of the size 50x47mm with a wall
thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet,
mitre cut at two corners and joined with 2Nos. of 150mm long brackets
of 15x15mm M.S square tube. The two vertical door profiles are to be
reinforced with 19x19mm MS Square tube of 19gauge. The door frame
shall be fixed to the wall using 65/100mm long MS screws through the
304 16.24 RM 299.1
frame by using PVC fasteners. A minimum of 4Nos. of screws to be
provided for each vertical member and minimum 2nos. for horizontal
member etc. complete as per manufacturers specification and direction
of Engineer-in-charge for finished item of work including all taxes as per
Approved Make
Providing & fixing 30 mm thick solid panel PVC door shutter consisting of
frame made out of 19 gauge M.S tube of 19 x 19 mm for stiles, top &
bottom rail, with a coat of primer of approved make. M.S. Frame covered
with 5 mm thick heat molded PVC - C channel of size of 30 x 50 mm
forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom
rail on either side 20mm wide cross PVC sheet as gap insert for top &
bottom rail, paneling of 10mm(+/-)( 5mm+5mm) thick PVC sheet fitted in
the M.S. frame welded /sealed to the stiles, on either side joined
together with solvent cement adhesive etc., additional 5 mm thick PVC
305 16.25 strip of 20 mm width stuck on the interior side of the C channel using Sqm 3315.9
solvent cement, and Including the following Aluminium anodized fittings
and all taxes complete as per direction of Engineer–in–charge,
manufacturers specification.: Single Shutter as per approved brand a) 1
no. 200mm long aldrop with 16mm dia shoot. b) 2 nos. 200 to 250mm
mm long tower bolts with 10mm dia shoot. c) 2 nos. 100 mm to 150 mm
long grip handles. d) 3 nos.100 mm long butt hinges.
Supply and fixing G.I sheet door shutter consisting of shutter frame with
25x25x5mm M.S. angle alround and 35x5mm flat Iron 3nos. as middle
rails and shutter frame covered with 22guage G.I. sheet (weight not less
than 6.66kg/ SQM) including the following M.S. powder coated fittings of
approved make fixed with necessary bolts, nuts, washers including
necessary welding of frame members, M.S. plates for providing aldrops,
grip handles etc., complete as per drawing and insturctions of Engineer-
in-charge. (Excluding Cost of Bed Blocks) The Steel Sections etc., required
will have to be procured by the contractor only and Steel will not be
306 16.26 Sqm 1654.5
issued by the department M.S. Powder coated Fittings :- (a) 1 no.200
mm long aldrop of 16mm dia rod. b)2 no. 200mm long tower bolt of
10mm dia rod having knob at holding end ( c) 1 no. grip handles 100 mm
to 150 mm long. d) M.S.pintols made out of 16mm dia rod and 300mm
long (e) M.S.flat hinges of 35x5mm of 400mm long. Note :-i) The G I
Sheet shall be folded in to the end of shutter frame alround in such a
way that the sharp edges shall not be exposed. ii) Proper bolting with
necessary G.I. bolts, washers and nuts shall be done for G I Sheet
alround the frame as well as to the middle rails/bracing.
Supply and fixing 28 gauge G.I sheet of weight not less than3.52 Kg/Sqm
to the existing door shutter (without dismantling) upto lock rail from
307 16.27 Sqm 311.6
bottom with necessary Aluminium screws etc., complete as directed
Supplying and fixing 75x75 mm window frame with Non teak wood with
4nos. M.S. Z type hold fasts made out of 50x3mm M.S. flat of 300 mm
313 16.33 RM 382
long fixed in bed blocks ( excluding Cost of bed blocks). Note: Mullions
are to be measured and paid.
Supply and fixing 30 mm thick panelled Window shutters with Medium
teak wood including the following Aluminium anodised fittings of
approved make. a) 2 nos. of 100 mm long butt hinges per leaf. b) 2 nos.
314 16.34 Sqm 6520.2
tower bolts 150 mm long with 10mm dia shoot per leaf. c) 1 no. 125 mm
long grip handle per leaf. d) 1 no.casement stay (Delux) 200 to 225mm
long per leaf.
Supply and fixing 30 mm thick panelled Window shutters with Non teak
wood including the following M.S. powder coated fittings of approved
make. a) 2 nos. of 100mm long butt hinges per leaf. b) 2 nos. tower bolts
315 16.35 Sqm 3113.4
150mm long with 10mm dia shoot per leaf. c) 1 no. 125mm long grip
handle per leaf. d) 1no.casement stay (Delux) 200 to 225mm long per
leaf.
Supply and fixing 12mm thick window shutters with plain Cement
bonded particle board (bison panel or equivalent) conforming to IS
14276 with alround U section of size 12x18mm x 12mm made from
0.60mm thick galvanised colour coated cold rolled steel profiles with
necessary srews fixed at every 1foot (304.8mm) intervals, fixing to the
existing angle iron frame along with the following MS Powder coated
fittings of approved make and applying 1coat of primer, one coat of
316 16.36 luppam and 2 coats of Synthetic enamel paints as per approved design Sqm 1292.7
including cost and conveyance of all materials to site, all labour charges
etc.,complete for finished Item of work as directed. a) 150mm tower
bolts with 10mm dia shoot - 2No.s per leaf b) 125mm long grip handles -
1No. per leaf c) 250mm long window casements- 1No. per leaf d)
200mm to 225mm long T- hinges 2nos per leaf
Supply and fixing Door frame of 125 x62mm with Medium teak wood
including supply and fixing with 6nos. M.S.Z type hold fasts made out of
284 16.4 RM 876.9
50x3mm M.S.flat 300mm long in CC beds, etc., complete. (Excluding Cost
of Bed Blocks.)
Supplying and fixing 4mm thick pin headed glass panes saint gobain /
320 16.4 modi guard or equivalent make including putty / wooden beading / Sqm 709.5
Rubber beading for wooden / iron windows.
Supply and fixing of Bed room cup board frames and shutters using
16mm thick prelaminated (Bison pre lam or equivalent) Cement bonded
board as per the approved Drawing with the following components. . 1).
The frame is of size 100mm x 32mm with one 16mm thick plain strip and
one 16mm thick pre laminated strip. Both strips joined by means of glue
and screws. The frame is fixed to the wall by means of screws of size
100mm. Teak wood beading of 32mm x 6mm thick is to be fixed alround
the frame work (Both sides). 2). The openable shutters are made of
16mm thick pre laminated board.Teak wood beading of 16mm x 6mm
321 16.41 thick is to be fixed on 4 sides of the shutters. Shutters are to be fixed to Sqm 2713.5
the frame by means of heavy duty MS Powder coated piano hinges.
Decorative teak beading of approved design and of size 12mm x 6mm is
to be fixed to the face side of openable shutters as per approved
drawing. 3). Sliding shutters are made of 10mm thick prelaminated
boards. Shutters are to be fitted in the Aluminium track of size 32mm x
6mm by using nickle coated sliding rollers of suitable size. 4). The cost is
inclusive of M.S.Powder coated Piano hinges (IS 3818), nickle coated
sliding rollers, brass ball catches, Hasp & Staple 2 Nos, Aluminium
anodised tower bolts (IS 204), handles (IS 208), etc., complete.
Supply and fixing of living room / hall cup board frames and shutters
using 16mm thick prelaminated (Bison pre lam or equivalent) Cement
bonded board as per the approved Drawing with the following
components. 1). The frame is of size 100mm x 32mm with one 16mm
thick plain strip and one 16mm thick pre laminated strip. Both strips
joined by means of glue and screws. The frame is fixed to the wall by
means of screws of size 100mm. Teak wood beading of 32mm x 6mm
thick is to be fixed alround the frame work(Both sides). 2). The openable
shutters are made of 16mm thick pre laminated board and 5mm thick
322 16.42 Sqm 2951.8
plain glass. Teak wood beading of 16mm x 6mm thick is to be fixed on 4
sides of the shutters. Shutters are to be fixed to the frame by means of
heavy duty MS Powder coated piano hinges. Decorative teak beading of
approved design and of size 12mm is to be fixed to the face side of
openable shutters as per approved drawing. 3). 5mm thick glass sliding
shutters in middle top. 4). Sliding shutters are made of 10mm thick
prelaminated Cement bonded boards. Shutters are to be fitted in the
Aluminium track of size 32mm x 6mm by using nickle coated sliding
rollers of suitable size. 5). The cost is inclusive of M.S.Powder coated
Supplying and fixing planking with 16mm thick plain cement bonded
323 16.43 particle boards including 50x37mm Non teak wood supports for wall Cup Sqm 916.1
boards / Almyrahs.
Supply and fixing double skin cement Fibre board (conforming to
IS:14862:2000) partition with Frame work made of GI stud profile of size
48 x 40 x 10 x 0.55mm thick placed at every 610 mm C/C intervals and
1220 mm horizontal intervals duly fixed with self expansion screws, the
cement board of 8 mm thick cladded around with self tapping self
324 16.44 embedding screws fixed at every 300 mm (centres) leaving 3 mm gap Sqm 1479.6
between two panels and the gap will be covered with decorative molding
surface will be given a smooth finish over cement primer. The rate is
inclusive of cost and conveyance of all materials and labour charges etc.
complete of approved make
Providing and fixing door & shutter of which frame made from 1.2 mm
powder coated cold rolled steel profiles of overall section size of 60 mm
x 45 mm with 21 mm rebate for shutter with necessary stiffeners hinges
and screws with Cement fibre BOARD (IS 14862) shutter with all-round
style U lipping of size 15 x 18 x 15 mm made from 0.8 mm thick CRCA
powder coated steel profile with 16 mm thick Cement Fibre board with
325 16.45 Sqm 1787.8
necessary screws fixed at every 1foot interval 250 mm long Aldrops 2
nos. M.S. nickel coated 250 mm long 1 no. M.S. Tower Bolts including
cost and conveyance, one coat of primer, 2 coats of luppum and 2 coats
of synthetic enamel paint as per approved colour, labour charges etc. of
approved make
Supply and fixing of Cement Bonded Prelaminated Particle Board double
skin partition using with 8 mm Cement Bonded Prelaminated Particle
Board made out of G.I track section of size 50 mm x 35mm x 0.55mm for
fixing to the roof and floor and stud section of size 48mm x 35mm x
0.55mm placed in track section vertically at 610mm intervals and at
1200mm internals horizontally. The frame is fixed by means of self
expansion screws and caps to the wall / roof. Cement Bonded
326 16.46 Sqm 2986.7
Prelaminated Particle Board is to be fixed both sides of the frame work
by using 2mm thick electro plated CR flat section leaving 3mm gap
between two panels. The cost inclusive of cost and conveyance of all
materials to sites, other materials incidentals and labour charges as per
the direction of Engineer in charges. of approved make
Supply and fixing Door frame of 100 x75mm with Medium teak wood
including supply and fixing with 6nos. M.S.Z type hold fasts made out of
285 16.5 RM 887.9
50x3mm M.S.flat 300mm long in CC beds, etc., complete. (Excluding Cost
of Bed Blocks.)
Supply and fixing Medium teak wood door shutters 37mm thick with
Medium teak wood frame 125x100mm with horns of 150mm long on
either side at top and with threshold with 6mm thick wrought iron plate
faced out side with all fitting complete. The door is to be provided with
330 16.5 Sqm 11796.5
contractors non ferrrous Brass T hinges (2 No.s 535mm long). The cost of
following fittings and iron plate will be paid separately. ( For Explosive
Magazine buildings)
Supply and fixing Medium teak wood, window shutter 37mm thick with
Medium teak wood frame of size 100mm x 100mm with horns of
150mm long on either side at top and bottom and 6mm thick wrought
Iron Plate faced outside and fitted with the following non - ferrous brass
hinges and brass fittings of approved make :- for windows of Explosives
331 16.51 Sqm 14031.3
Magazine buildings. (The cost of Iron plate will be paid separately) with
Brass fittings :- a) 150mm long Brass tower bolts with 10mm dia shoot -
2 nos. per leaf b) 535mm long Brass T - hinges - 2 nos. per leaf
Supply and fixing Medium teak wood frame 50 x 50mm with Brass wire
of 8 guage mesh duly fixed to it, over that 25 mm reeper is fixed for
332 16.52 Sqm 7886.4
inside face for 225x150mm Z type Ventilators. (For Explosives Magazine
buildings)
Supply and fixing Medium teak wood reepers of size 25x 50mm Verticals
as furring strips fixed to the wall @ 300mm c/c and from 150mm height
above floor level upto 2.50m hieght including supply and fixing Medium
333 16.53 teak wood gutties in the wall @ 500mm c/c including fixing the above RM 132.8
reepers with 65mm long Brass screws etc., complete as directed. (For
Explosive Magazine buildings)
Supply, Fabrication and fixing of door frame made of Angle iron of size
40x40x 6mm with one coat of Red oxide grade-I primer with the
following MS fittings (Excluding Cost of Bed Blocks)(The Steel Sections
etc., required will have to be procured by the contractor only and Steel
will not be issued by the department) 1). 6nos. M.S. Z type hold fasts
334 16.54 RM 309.4
made out of 15x3mm flat of 100mm long fixed in CC 1:2:4 bed blocks
(150 x 100x 100mm) 2) 10mm dia tie rod at the bottom with necessary
nuts at the ends of Each side 3). 1no.stopper hinge per leaf 75mm
medium duty 4). 4 No.s 300mm long T-Hinges
Supply and fixing PELMET BOXES to doors & windows with 18mm thick
MDF boards interior one side lami nated of Approved Make and shade
150mm wide including providing Aluminium Anodised curtain rod of
20mm & with brackets, Aluminium screws, with necessary nails
335 16.55 etc.,including cost and conveyance of all materials, all labour charges, all RM 477.6
operational and incidental charges etc., complete for finished item of
work, as dircted Note:- Measurement is to be made on face side of Door
& window only excluding offsets
Supply and fixing double action brass cast hydraulic floor spring Hardwyn
make (IS:6315-Table 1) for doors including cost of cutting floors as
required, embedding in floors and S.S./ Brass cover plates with brass
339 16.57 Each 3485.4
pivot and single piece M.S. Sheet outer box with slide plate etc. complete
(door weight capacity up to 130 kgs)
Supply and fixing double action brass cast hydraulic floor spring Hardwyn
make (IS:6315-Table 1) for doors including cost of cutting floors as
required, embedding in floors and S.S./ Brass cover plates with brass
340 16.58 Each 2591.1
pivot and single piece M.S. Sheet outer box with slide plate etc. complete
(door weight capacity up to 80 kgs)
Labour charges for fixing of Aldrops (Sliding door bolt), Tower Bolts, Tee
341 16.59.1 Each 18.8
Hinges
Labour charges for fixing of Butt Hinges, Grip Handles, Hasp and Staple
342 16.59.2 Each 11.4
343 16.59.3 Labour charges for fixing of Hydraulic door closer Each 104.6
Supply and fixing Door frame of 100 x75mm with Non teak wood
including supply and fixing with 6nos. M.S.Z type hold fasts made out of
286 16.6 RM 555.7
50x3mm M.S.flat 300mm long in CC beds, etc., complete. (Excluding Cost
of Bed Blocks.)
344 16.6 Labour Charges for fixing doors and windows With Fittings Each 524.1
Supply and fixing the Aluminium anidised fittings including necessary
bolts and nuts etc. complete for finished item of work as directed. -
345 16.61.1 Each 309
Aldrops ( As per IS –2681) 200 mm long with 16mm dia shoot
Providing and fixing of door frames factory made, internal door frames
without threshold, fabricated from pre painted cold roll formed section
100 mm x 60 mm made of galvanized (base steel as per IS-513 ‘D’ quality
galvanized as per IS-277 with Zinc of 120 Gms/sqm) steel colour coated
sections with total coated thickness of 1 mm primer coated with epoxy
primer of 5-7 microns thick finish painted with polyester paint of 12- 16
microns and back coated with alkyd backer of 5-7microns, the frame
section filled with polyurethane (PU Foam) of 40 kg/Cum and the
sections cut to length and mitre joined by means of 1.25 mm thick CRCA
288 16.8 RM 351.5
electroplated corner brackets of size 75 x 75 mm and 1.25 mm thick
electroplated stiffeners of size 150 mm for fixing hold fasts and hinges
with MS Powder coated fittings of approved make a) 6 Nos M.S. Z. Type
hold fasts made of 30mm x 3 mm MS flat of 230mm long, or expandable
PVC covered screw type fasteners. b) 12 mm Dia MS tie rod at bottom
with necessary size of nuts on either side. c) Nylon aldrop receiver - 1 No
Supply and fixing of factory made Bathroom door frames without
threshold, fabricated from pre-painted cold roll formed section 50mm x
50 mm made of galvanized steel as per IS – 513 ‘D’ quality, galvanized as
per IS-277 steel colour coated sections primer coated with epoxy primer
finish painted with polyester paint the frame section filled with
polyurethane (P.U. Foam) of 40 Kg/Cum; and the sections joined by
means of 1.25mm thick CRCA electroplated corner brackets of size 75 x
289 16.9 75 mm and 1.25mm thick electroplated stiffeners of size 150mm for RM 309.2
fixing hold fasts and hinges together with the following MS Power coated
fitting (Supply and fixing) of approved make. a) 6 Nos M.S. Z. Type hold
fasts made of 30mm x 3 mm MS flat of 230mm long, or expandable PVC
covered screw type fasteners. b) 12 mm Dia MS tie rod at bottom with
necessary size of nuts on either side. c) Nylon aldrop receiver - 1 No
17.PAINTING TO WOOD OR STEEL WORK
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Painting to new wood work/ New Plastered Surfaces with two coats of
synthetic enamel paint of grade II of Approved Make and shade including
370 17.1 Sqm 145.9
a base Coat of wood primer of Approved Make making 3 coats in all
complete for finished item of work.
Varnishing/French Polishing to wood work, 2 coats complete for finished
379 17.1 Sqm 141.4
item of work
Painting with best Aluminium paint grade-I of Approved Make, shade, 2
380 17.11 coats to New Iron works complete for finished item of work. Sqm 93.6
Painting with Red oxide iron primer paint grade-1 - One Coat - For Old
382 17.13 Sqm 48.3
Iron Work complete for finished item of work.
Painting to wood work/ Plastered Surfaces with synthetic enamel paints
371 17.2 of Approved Make, shade with grade II paints, Two coats to old works Sqm 92.4
complete for finished item of work.
Painting to wood work/ Plastered Surfaces (New or old) with synthetic
372 17.3 enamel paints of Approved Make, shade with grade II paint one coat Sqm 55
complete for finished item of work.
Painting, priming coat on New Iron work with Red oxide iron primer
373 17.4 paint grade-1 of Approved Make complete for finished item of work. Sqm 50.8
Painting with Red Oxide paints of grade - I paints to old Iron work, two
374 17.5 Sqm 77.2
coats complete for finished item of work.
Painting with Synthetic enamel paints of grade II paints to new Iron
work, two coats including a base coat of Red oxide primer paint grade-1
375 17.6 Sqm 137
making three coats in all, complete for finished item of work.
SR ITEM
ID DESCRIPTION UNIT RATE
NO
White washing to New walls with Surya Cem / Equivalent Cem two coats
383 18.1 Sqm 29.6
complete for finished item of work.
White washing with Surya Cem / Equivalent Cem, Two coats to OLD
384 18.2 Sqm 19.7
WALLS complete for finished item of work.
White washing to New walls with Surya Cem / Equivalent Cem One coat
385 18.3 Sqm 19.9
complete for finished item of work.
White washing with Surya Cem / Equivalent Cem, One coat to OLD
386 18.4 Sqm 13.3
WALLS complete for finished item of work.
Whiting to New ceiling two coats with Surya cem / Equivalent Cem of
387 18.5 Sqm 32.8
approved quality complete for finished item of work.
Whiting to OLD ceiling two coats with with Surya cem / Equivalent Cem
388 18.6 of approved quality to give an even shade complete for finished item of Sqm 21.9
work.
Whiting to Old ceiling One coats with Surya cem / Equivalent Cem of
389 18.7 Sqm 13.1
approved quality complete for finished item of work.
19.COLOUR WASHING
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Colour washing to new walls with Surya Cem / Equivalent Cem, adding
390 19.1 required colour two coats complete for finished Item of work. Sqm 31.5
Colour washing to OLD WALLS with Surya Cem / Equivalent Cem adding
391 19.2 required colour two coats complete for finished Item of work. Sqm 21.1
Colour washing to New walls with Surya Cem / Equivalent Cem, adding
392 19.3 required colour One coat complete for finished Item of work. Sqm 20.9
Colour washing to OLD WALLS one coat with Surya Cem / Equivalent
393 19.4 Cem, adding required colour complete for finished Item of work, as Sqm 14
directed.
20.DISTEMPERING, EMULSION PAINTING
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Oil bound Distempering to New walls with 2 coats with Approved Make
394 20.1 distemper over a base coat of Grade -1 primer (making 3 coats in all) Sqm 109.1
complete for finished Item of work.
Acrylic exterior emulsion Painting to Old walls 2 coats with Grade-II i.e.,
403 20.1 Ace or equivalent paint of Approved Make complete for finished Item of Sqm 75.5
work
Providing Superior quality wall care putty 2 coats for internal / external
404 20.11 Sqm 69.2
walls complete for finished Item of work.
Lifts charges for Exterior emulsion painting Grade –II for Old RCC
405 20.12.1 Sqm 7.6
Elevated tanks - Above 5m to 8m
Lifts charges for Exterior emulsion painting Grade –II for Old RCC
406 20.12.2 Sqm 15.1
Elevated tanks - Above 8m to 11m
Lifts charges for Exterior emulsion painting Grade –II for Old RCC
407 20.12.3 Sqm 22.7
Elevated tanks - Above 11m to 14m
Lifts charges for Exterior emulsion painting Grade –II for Old RCC
408 20.12.4 Sqm 30.2
Elevated tanks - Above 14m to 17m
Lifts charges for Exterior emulsion painting Grade –II for Old RCC
409 20.12.5 Sqm 37.8
Elevated tanks - Above 17m to 20m
Lift charges for Exterior emulsion painting for external old walls of
410 20.13.1 Sqm 7.6
building (Floor height up to 3.66M) - In First Floor
Lift charges for Exterior emulsion painting for external old walls of
411 20.13.2 Sqm 15.1
building (Floor height up to 3.66M) - In Second Floor
Acrylic exterior emulsion Painting to Old walls One coat with Grade-I i.e.,
412 20.14 Apex or equivalent paint of approved brand complete for finished Item Sqm 57.7
of work
Acrylic exterior emulsion Painting to Old walls One coat with Grade-II
413 20.15 i.e., Ace or equivalent paint of approved brand complete for finished Sqm 50.3
Item of work
Oil bound Distempering to Old walls with Approved Make distemper two
395 20.2 Sqm 57
coats complete for finished Item of work.
Oil bound Distempering to Old walls with Approved Make distemper One
396 20.3 Sqm 34.1
coat complete for finished Item of work.
Plastic emulsion Painting to New Internal walls with paint of Approved
397 20.4 Make with 2 coats over a base coat of Grade -1 primer (making 3 coats in Sqm 114.7
all) complete for finished Item of work
Plastic emulsion Painting to Old Internal walls with paint of Approved
398 20.5 Sqm 60.7
Make, two coats complete for finished Item of work.
Plastic emulsion Painting to Old Internal walls with paint of Approved
399 20.6 Sqm 36
Make, One coat complete for finished Item of work.
Acrylic exterior emulsion Painting to New walls with Grade-I i.e., Apex or
equivalent paint of Approved Make 2 coats over a base coat of Grade -II
400 20.7 Sqm 139
primer (making 3 coats in all) complete for finished Item of work
Acrylic exterior emulsion Painting to Old walls 2 coats with Grade-I i.e.,
401 20.8 Apex or equivalent paint of Approved Make complete for finished Item Sqm 86.5
of work
Acrylic exterior emulsion Painting to New walls with Grade-II i.e., Ace or
equivalent paint of Approved Make 2 coats over a base coat of Grade -II
402 20.9 Sqm 122.5
primer (making 3 coats in all) complete for finished Item of work
21.ROAD WORKS (EMBANKMENT/WBM & WMM)
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Excavation for Road work in soil with Hydraulic Excavator 0.9cum bucket
capacity including cutting and loading in tippers / pushing the earth to
side of embankment (by trench cutting) including trimming bottom and
414 21.1 Cum 56.8
side slopes, in accordance with requirements of lines and grades and
cross sections as per technical specification 301 of MORT & H
Spreading 40mm metal including watering and rolling with power roller,
watering and spreading gravel for blindage and power roller rolling,
including hire charges of power roller (8 to 10T), barricading and
417 21.4.1 diversion of traffic and wetting the new consolidation for a fortnight. The Sqm 30.7
rate includes Picking the old metalled surface to a depth of 40 to
100mm, but excluding cost of metal and gravel - For compacted
thickness of 75mm thick
Spreading 40mm metal including watering and rolling with power roller,
watering and spreading gravel for blindage and power roller rolling,
including hire charges of power roller (8 to 10T), barricading and
418 21.4.2 diversion of traffic and wetting the new consolidation for a fortnight. The Sqm 32.8
rate includes Picking the old metalled surface to a depth of 40 to
100mm, but excluding cost of metal and gravel - For compacted
thickness of 100mm thick
Spreading 40mm metal including watering and rolling with power roller,
watering and spreading gravel for blindage and power roller rolling,
including hire charges of power roller (8 to 10T), barricading and
419 21.4.3 diversion of traffic and wetting the new consolidation for a fortnight. The Sqm 59.2
rate includes Picking the old metalled surface to a depth of 40 to
100mm, but excluding cost of metal and gravel - For compacted
thickness of 150mm thick
Providing, laying, spreading for a compacted thickness of 75mm, using
stone aggregates of Grade-I machine crushed granite metal as per table
400-9 of Technical Specification 404 of MORT & H for Water Bound
macadam specification including cost, conveyance and spreading in
uniform thickness, hand packing, rolling with vibratory roller 80-100 KN
in stages to proper Grade and camber applying and brooming requisite
Type-A Stone screenings as per table 400-10 & 11 and stone binding
420 21.5 Materials as to fill up the interstices of coarse aggregates, watering and Cum 1487.2
compacting to the required density for finished item of work (Payment
will be made based on levels for finished item of work.) (Material
required per Cum : 63 to 45 mm metal -1.21 cum; 13.2mm to 180micron
screening metal - 0.16cum; 2.36mm and below binding material metal -
0.08Cum)
424 21.9 Supply of Good Gravel ( Note: 1/6 th will be deducted for voids) Cum 111.4
22.ROAD WORKS (Black Topping)
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Laying of tack coat with VG-10 bitumen @ 2 kg/10m2 on Bituminous
surface including heating of bitumen to the appropriate range with self
heating arrangements and spraying tar with nozzles and applying
uniformly with aid of bitumen pressure spraying including labour
charges, hire and operational charges of T and P and all other
425 22.1 operational and contingent charges necessary to complete the finished Sqm 2.1
item of work to the specifications including cleaning of existing surface
with mechanical broom as per Technical specification No. 503 of MORTH
and as directed by the Engineer-in-charge. (Excluding Cost of Bitumen)
Laying of tack coat with VG-10 bitumen @ 2.50 kg/10 Sqm on Granular
surface including heating of bitumen to the appropriate range with self
heating arrangements and spraying tar with nozzles and applied
uniformly with aid of bitumen pressure spraying including labour
charges, hire and operational charges of T and P and all other
426 22.2 operational and contingent charges necessary to complete the finished Sqm 2.1
item of work to the specifications including cleaning of existing surface
with mechanical broom as per Technical specification No. 503 of MORTH
and as directed by the Engineer-in-charge. (Excluding Cost of Bitumen)
Providing and laying Type A seal coat with VG-10 Bitumen sealing the
voids in a bituminous surface laid to the specified levels, grade and cross
fall using Crushed granite chips of 6.7mm size i.e., 100% passing 11.2mm
sieve and retained on 2.36mm sieve applied @ 0.09cum per 10sqm on
432 22.8 Sqm 11.8
Bitumen @ 9.80Kg/10Sqm as per Technical Specification 510 of MORTH,
compacting with Three wheel 80-100 kN static roller complete (Excluding
Cost of Bitumen)
Providing and laying of Type B seal coat using VG- 30 Bitumen with hot
mix plant using crushed stone chipping 6.7 mm size i.e., 100% passing
11.2mm sieve and retained on 2.36mm sieve applied @ 0.06cum per
433 22.9 10sqm on Bitumen @ 6.8Kg/10Sqm as per Technical specification 510 of Sqm 11.9
MoRT&H compacting with Three wheel 80-100 kN static roller complete
(Excluding Cost of Bitumen)
23.ROAD WORKS(CEMENT CONCRETE)
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Cement Concrete 1:4:8 with 40mm down size (Crushed Granite metal of
approved hard quality including machine mixing and vibrating with
mechanical vibrator finishing to the required camber for CC Pavement
441 23.1 Cum 2224.5
sub grade including necessary side shuttering etc., Complete for finished
Item of work as directed ( Excluding Cost of Cement).(CA : 0.90 Cum,
FA:0.45Cum)
Supply of Separation Membrane of impermeable plastic sheeting 125
1184 23.1 Sqm 11.5
micron thick
Treating the pavement by the method of dewatering of surplus water
from the concrete immediately after placing and vibrating to reduce the
water cement ratio to an optimum level by means of suitable equipment
such as vacuum pumps, surface vibrator, suction mat, filter pads, skin
1217 23.11 floater etc., to achieve high strength of concrete with size forms as MS Sqm 82.1
channels etc., including cost, conveyance of all machinery to work site,
Labour charges etc., complete for finished item of work and as directed
by the Engineer-in-charge
Cement Concrete 1:2:4 with 20mm down size (65% of 20-10mm and 35%
of 10-4.75mm) graded Crushed Granite metal of approved hard quality
including machine mixing and vibrating with mechanical vibrator
finishing to the required camber for CC Pavements including necessary
442 23.2 side shuttering etc., Complete for finished Item of work as directed Cum 2432.3
(Excluding Cost of Cement).(CA : 0.90 Cum, FA:0.45Cum) Note:- Cost of
steel reinforcement provided if any will be paid separately including its
fabrication charges
Cement Concrete M-30 design mix Concrete corresponding to IS 456
using Concrete Mixer with 20mm down size (65% of 20-10mm and 35%
of 10-4.75mm) graded Crushed Granite metal including cost and
conveyance of all materials to site and including machine mixing and
vibrating with mechanical vibrators, finishing, and centering/shuttering
443 23.3 Cum 2454.3
charges, etc, (Excluding cost of Cement) for CC Pavements. Cement @
400Kg/Cum of concrete is to be used. (CA : 0.90 Cum, FA:0.45Cum) Note:-
Cost of steel reinforcement provided if any will be paid separately
including its fabrication charges
Providing expansion joints 25x 75mm and filling it with Bitumen mixed
with sand 1:1 (Excluding Cost of Bitumen) material required for RM:
444 23.4 RM 26.6
Bitumen-1KG, Sand-0.001Cum Note:- Required Bitumen will be issued
Departmentally.
Supply and fixing Mastic pad of 1 Inches (25.4mm ) thick including cost
and conveyance of all materials to site of work, all labour charges,
445 23.5 Sqm 990.9
cutting the pad to the required size and fixing the same as directed etc.,
complete
Cement Concrete M-35 design mix Concrete corresponding to IS 456
using Concrete Mixer using 20mm down size (65% of 20-10mm and 35%
of 10-4.75mm) graded Crushed Granite metal including cost and
conveyance of all materials to site and including machine mixing and
vibrating with mechanical vibrators, finishing, and centering/shuttering
446 23.6 Cum 2454.3
charges, etc, (Excluding cost of Cement) for CC Pavements. Cement @
420Kg/Cum of concrete is to be used. (CA : 0.90 Cum, FA:0.45Cum) Note:-
Cost of steel reinforcement provided if any will be paid separately
including its fabrication charges
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Supply of RCC hume pipes of NP3 Class conforming to IS - 458 with
450 24.1.1 collars including transportation from factory up to 5 Km and loading, RM 1731.2
unloading and stacking - 450 mm dia
Supply of RCC hume pipes of NP3 Class conforming to IS - 458 with
451 24.1.2 collars including transportation from factory up to 5 Km and loading, RM 2806.7
unloading and stacking - 600 mm dia
Supply of RCC hume pipes of NP3 Class conforming to IS - 458 with
452 24.1.3 collars including transportation from factory up to 5 Km and loading, RM 5682.7
unloading and stacking - 900 mm dia
Supply of RCC hume pipes of NP3 Class conforming to IS - 458 with
453 24.1.4 collars including transportation from factory up to 5 Km and loading, RM 7070.3
unloading and stacking - 1000mm Dia
Supply of RCC hume pipes of NP3 Class conforming to IS - 458 with
454 24.1.5 collars including transportation from factory up to 5 Km and loading, RM 9782.5
unloading and stacking - 1200mm Dia
Cement Concrete 1:4:8 with 40 mm Crushed granite metal of approved
hard quality in foundations of CD works including machine mixing,
vibrating with necessary shuttering etc., Complete as per drawings and
491 24.1 Cum 2260.7
technical specification Clauses 802, 803, 1202 & 1203 MORD and 1500,
1700 & 2100 MORTH (But Excluding Cost of Cement) (CA : 0.90 Cum,
FA:0.45Cum)
Cement Concrete 1:3:6 with 40mm down size (50% of 40-20mm, 30% of
20-10mm and 20% of 10-4.75mm) graded crushed granite metal of
approved hard quality including machine mixing, vibrating with
necessary shuttering and centering charges, etc., Complete for finished
Item of work as directed for Substructure of CD works i.e, abutments /
492 24.11.1 Cum 2723.2
peirs / wing walls / returns etc., up to a height of 5M as per drawings and
technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204
MORD and 1500, 1700 & 2200 MORTH (Excluding Cost of Cement) (CA :
0.90 Cum, FA:0.45Cum)
Extra Lift charges for RCC grade M 20 (Design Mix) for Substructure of CD
495 24.12.2 works i., abutments / peirs / wing walls / returns etc., from 5M to 10M Cum 92.4
height
Reinforced cement concrete 1:1.5 : 3 with 20mm down size (65% of 20-
10mm and 35% of 10-4.75mm) graded crushed granite metal of
approved hard quality including machine mixing, vibrating with
necessary shuttering and centering charges, etc., Complete for finished
Item of work as directed for Super structure of CD works i.e ., Deck slab
496 24.13.1 Cum 3361.4
complete as per drawings and technical specification Clauses 800,
1205.5 MORD / sections 1500, 1600 & 1700 MORTH (but excluding cost
of steel reinforcement and its fabrication charges and Cost of Cement)
(CA : 0.90 Cum, FA:0.45Cum)
Reinforced cement concrete 1:1.5 : 3 with 20mm down size (65% of 20-
10mm and 35% of 10-4.75mm) graded crushed granite metal of
approved hard quality including machine mixing, vibrating with
necessary shuttering and centering charges, etc., Complete for finished
Item of work as directed for Super structure of CD works i.e ., approach
497 24.13.2 Cum 2544.7
slabs on drains complete as per drawings and technical specification
Clauses 800, 1205.5 MORD / sections 1500, 1600 & 1700 MORTH (but
excluding cost of steel reinforcement and its fabrication charges and
Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum)
Dewatering charges for Foundations below low water level for CD works
506 24.19.2 Cum 69.5
as directed - For Lean Concrete
Dewatering charges for Foundations below low water level for CD works
507 24.19.3 Cum 83.7
as directed - For Structural Concrete
Conveyance of RCC plain ended pipes of NP3 Class including collars on all
weather roads over and above initial lead of 5KM (Rate is for every
455 24.2.1 KM RM. 2.3
additional 1 Km. lead or part there of ) - 450 mm dia
Conveyance of RCC plain ended pipes of NP3 Class including collars on all
weather roads over and above initial lead of 5KM (Rate is for every
456 24.2.2 KM RM. 5.2
additional 1 Km. lead or part there of ) - 600 mm dia
Conveyance of RCC plain ended pipes of NP3 Class including collars on all
weather roads over and above initial lead of 5KM (Rate is for every
457 24.2.3 KM RM. 11.3
additional 1 Km. lead or part there of ) - 900mm dia
Conveyance of RCC plain ended pipes of NP3 Class including collars on all
weather roads over and above initial lead of 5KM (Rate is for every
458 24.2.4 KM RM. 11.3
additional 1 Km. lead or part there of ) - 1000mm dia
Conveyance of RCC plain ended pipes of NP3 Class including collars on all
weather roads over and above initial lead of 5KM (Rate is for every
459 24.2.5 KM RM. 12.3
additional 1 Km. lead or part there of ) - 1200mm dia
Labour charges for Laying and fixing RCC hume pipes of NP3 class in
position including lifting, lowering, aligning and fixing with collar with
460 24.3.1 Cement Mortar1:2 and hemp yarn (but excluding cost of Cement for RM 58.3
jointing)etc., complete for finished item of work - 450 mm dia
Labour charges for Laying and fixing RCC hume pipes of NP3 class in
position including lifting, lowering, aligning and fixing with collar with
461 24.3.2 Cement Mortar1:2 and hemp yarn (but excluding cost of Cement for RM 78.7
jointing)etc., complete for finished item of work - 600 mm dia
Labour charges for Laying and fixing RCC hume pipes of NP3 class in
position including lifting, lowering, aligning and fixing with collar with
462 24.3.3 Cement Mortar1:2 and hemp yarn (but excluding cost of Cement for RM 118.1
jointing)etc., complete for finished item of work - 900 mm dia
Labour charges for Laying and fixing RCC hume pipes of NP3 class in
position including lifting, lowering, aligning and fixing with collar with
463 24.3.4 Cement Mortar1:2 and hemp yarn (but excluding cost of Cement for RM 162.8
jointing)etc., complete for finished item of work - 1000 mm dia
Labour charges for Laying and fixing RCC hume pipes of NP3 class in
position including lifting, lowering, aligning and fixing with collar with
464 24.3.5 Cement Mortar1:2 and hemp yarn (but excluding cost of Cement for RM 252
jointing)etc., complete for finished item of work - 1200 mm dia
Conveyance of RCC plain ended pipes of NP2 Class including collars on all
weather roads over and above initial lead of 5KM (Rate is for every
471 24.5.2 KM RM. 3.7
additional 1 Km. lead or part there of ) - 600 mm dia
Conveyance of RCC plain ended pipes of NP2 Class including collars on all
weather roads over and above initial lead of 5KM (Rate is for every
472 24.5.3 KM RM. 5.2
additional 1 Km. lead or part there of ) - 900mm dia
Conveyance of RCC plain ended pipes of NP2 Class including collars on all
weather roads over and above initial lead of 5KM (Rate is for every
473 24.5.4 KM RM. 10.6
additional 1 Km. lead or part there of ) - 1000mm dia
Conveyance of RCC plain ended pipes of NP2 Class including collars on all
weather roads over and above initial lead of 5KM (Rate is for every
474 24.5.5 KM RM. 11.3
additional 1 Km. lead or part there of ) - 1200mm dia
Labour charges for Laying and fixing RCC hume pipes of NP2 class in
position including lifting, lowering, aligning and fixing with collar with
475 24.6.1 Cement Mortar 1:2 and hemp yarn (but excluding cost of Cement for RM 40
jointing)etc., complete for finished item of work.- 450 mm dia
Labour charges for Laying and fixing RCC hume pipes of NP2 class in
position including lifting, lowering, aligning and fixing with collar with
476 24.6.2 Cement Mortar 1:2 and hemp yarn (but excluding cost of Cement for RM 54.2
jointing)etc., complete for finished item of work.- 600 mm dia
Labour charges for Laying and fixing RCC hume pipes of NP2 class in
position including lifting, lowering, aligning and fixing with collar with
477 24.6.3 Cement Mortar 1:2 and hemp yarn (but excluding cost of Cement for RM 81.5
jointing)etc., complete for finished item of work.- 900 mm dia
Labour charges for Laying and fixing RCC hume pipes of NP2 class in
position including lifting, lowering, aligning and fixing with collar with
478 24.6.4 Cement Mortar 1:2 and hemp yarn (but excluding cost of Cement for RM 111.8
jointing)etc., complete for finished item of work.- 1000 mm dia
Labour charges for Laying and fixing RCC hume pipes of NP2 class in
position including lifting, lowering, aligning and fixing with collar with
479 24.6.5 Cement Mortar 1:2 and hemp yarn (but excluding cost of Cement for RM 172
jointing)etc., complete for finished item of work.- 1200 mm dia
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Fabrication of structural steel components like stanchions, built up
columns, trestles, beams, trusses, N girders, chequered plate walk way
etc., including all leads and lifts at site etc., with companys steel sections
509 25.1 but with contractors welding rods, bolts, rivets and all contingencies, tonne 20450.7
power charges, etc., complete as per drawings and insructions of the
Engineer in charge.
Add Extra towards cost of gear operation for supply and fixing of rolling
519 25.10.2 shutter with above 12 Sqm area as per site requirement Sqm 493.5
Erecting companys steel purlins, louvers, sag rods, rafters etc., with
512 25.4 tonne 14770
contractors tackle, derric, crane etc., complete
Labour Charges for Fabrication of steel works like window grills,
compound wall grills, Iron Doors, windows, Verandah grils and window
513 25.5 Kg 29.5
guard bars including cost of welding rods, power charges etc., ( Excluding
cost of fixing in position)
Labour Charges for Fixing of window grills, compound wall grills, Iron
514 25.6 Doors, windows, Verandah grils, and window guard bars in position etc., Kg 4.5
complete.
Fabrication of steel works like compound wall gates, MS fencing posts on
ground or on top of compound wall, cattle trap , MS holding down bolts,
515 25.7 Tonne 17042.3
templates, in position etc., complete including cost of welding rods,
power charges etc., complete.
Erection of compound wall gates, MS fencing posts on ground or on top
516 25.8 of compound wall, cattle trap , MS holding down bolts, templates, in Kg 4.5
position etc., complete
Supplying and fixing collapsible steel shutters with vertical double
channel of 20x10x2 mm of 100mm centre, Bracers with flat iron 20x5mm
with 38 mm dia steel pulleys in every 4th double channel. Top and
bottom rails with T iron 40 x 40x 6mm, and side vertical frames of the
collapsible gate with 65x65x8mm MS Angle fixed with necessary hold
517 25.9 fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all Sqm. 2879.1
accessories all fixtures and painted with one coat of approved steel
primer etc., complete for finished item of work as per special spn 1105
of APDSS and as directed. (This is bought out Item. Steel will not be
issued by the department.)
26.WIRE FENCING
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Labour charges for fixing galvanised steel barbed wire (For each strand)
520 26.1 RM 3.2
Rate includes cost of required binding wire.
Providing 2.00M height chain link mesh fencing with companys chain link
mesh, fixed on companys old Iron posts @2.50m c/c, grouting the posts
in CC 1:5:10, base of 450x450x600mm, with support posts for every 5th
post; grouting in CC 1:5:10, base of 450x450x450mm, including earth
1191 26.1 work excavation complete for finished item of work as per drawing and RM 156.4
as directed. ( But Excluding cost of Cement) Note :- i) CC 1:5:10 concrete
should be with 40mm size crushed granite metal. ii) Fabrication &
Erection charges of Iron Posts will be paid separately
Barbed wire Wire fencing 2.00m high with Galvanised steel barbed wire
Conforming to IS 278 -1978 Type A -4 Point barbs round both line wires
75mm apart, 13strands, bottom 8nos. at 150mm apart, middle 2nos. at
225mm apart, and top 3nos. on the slanting portion of the fencing posts
at 150mm apart and diagonal wiring connecting the wires in between
the posts (i.e one set of diagonals upto slanting portion and another set
of diagonals connecting horizontal wire from bottom connecting wires in
the slanting portion covering 13 strands in between the RCC posts, in
521 26.2 each bay, tied with G.I binding wire) on the precast RCC fencing posts RM 327.3
150mm square at the bottom 125mm square at top & 100mm square at
the end of the slanting portion. Note:- The coarse aggregate for casting
precast RCC 1:2:4 fencing posts should be 20mm down size (65% of 20-
10mm and 35% of 10-4.75mm) graded crushed granite metal and
concrete is to be machine mixed and CC 1:5:10 concrete should be with
40mm crushed granite metal.
Barbed Wire fencing 1.40M high with Galvanised steel barbed wire,
Conforming to IS 278 -1978 Type A -4 Point barbs round both line wires
75mm apart, 8 horizontal strands at 150mm apart and 2diagonals in
between RCC posts in each bay tied with G.I binding wire on precast RCC
1:2:4 posts of size 100 x100mm and 180cm high at 3m c/c and corner
posts and support posts of 100 x100mm at every 10th fencing posts,
fixed in CC 1:5:10 base of 450x450x450mm including earthwork
excavation for foundation of posts etc.,complete as directed. Gap
522 26.3 between Ground level and bottom strand should not be more than RM 153.9
150mm. (Excluding Cost Of Cement and G.I Barbed wire and steel
reinforcement and its Fabrication charges and Hooks) Note:- The coarse
aggregate for casting precast RCC 1:2:4 fencing posts should be 20mm
down size (65% of 20-10mm and 35% of 10-4.75mm) graded crushed
granite metal and concrete is to be machine mixed and CC 1:5:10
concrete should be with 40mm crushed granite metal.
Barbed Wire fencing 1.00 M high with Galvanised steel barbed wire
conforming to IS 278 -1978 Type A -4 Point barbs round both line wires
75mm apart, 5 horizontal stands (Gap between G.L. and bottom strand
not more than 150mm, Gap between two strands not more than
250mm) and 2 diagonals in between RCC posts in each bay tied with G.I.
binding wire on precast RCC 1:2:4 posts of size 150mmx150mm and 140
CM high at 3m c/c and corner posts and support posts of
150mmx150mm & 150mmx50mm respectively as required fixed in CC
1:5:10 base of 450x450x450mm including earthwork excavation for
523 26.4 RM 159.2
foundation of posts etc., complete as directed conforming to DGMS
stipulations.(excluding cost of G.I. Barbed wire, steel reinforcement and
its Fabrication charges, Hooks and Cost of Cement) Note:- The coarse
aggregate for casting precast RCC 1:2:4 fencing posts should be 20mm
down size (65% of 20-10mm and 35% of 10-4.75mm) graded crushed
granite metal and concrete is to be machine mixed and CC 1:5:10
concrete should be with 40mm crushed granite metal.
Providing 2.00M height chain link mesh fencing along with barbed wire
fencing over it with Hot dipped Galvanized Iron chain link mesh 8 gauge
(4.0 mm) as per IS 2721 - 1979 (50mm x 50mm) 2m height , fixed with
MS flat of size 50x6mm (@ 3 Nos. on each post) with 6 No.s of 12mm dia
bolts on each posts, on precast RCC fencing post of size 150mm Square
at bottom , 125mm square at top(i.e at middle portion )& 100mm square
at top of the slanting portion @2.50m c/c, grouting the posts in CC
1:5:10, base of 600x600x600mm, with support posts of size 100mm x
100mm x 2.50m for every 5th post; & grouting the posts in CC 1:5:10,
524 26.5 RM 452.5
base of 450x450x450mm, including earth work excavation, & providing
Galvanised steel barbed wire fencing with 4 Nos. horizantal strands, 2
No.s diagonal strands on the slanting portion etc., including cost of all
materials like precast RCC posts, CC 1:5:10, bolts,washers, nuts, all
labour charges etc., complete for finished item of work as per drawing
and as directed. The height of G.I Chain link mesh is 2.00M. Length of the
Fencing post is 3.20M (but excluding cost of G.I. Barbed wire, G.I. Chain
link mesh, M.S. Flat, Steel reinforcement and its fabrication charges,
Hooks and Cost of Cement) Note:-i) The coarse aggregate for casting
Providing 1.40M height G.I chain link wire mesh fencing with Hot dipped
Galvanized Iron chain link mesh 8 gauge (4.0 mm) as per IS 2721 - 1979
(50mm x 50mm) 1.40m height , fixed with MS flats of size 50x6mm (@
2Nos. on each post) with 4No.s of 12mm dia bolts on each posts, on
precast RCC fencing post of size 150mm Square at bottom, 125mm
square at top @2.50m c/c, with support posts/corner posts of size
100mmx100mmx2000mm at every 5th fencing post and grouting the
posts in CC 1:5:10, base of 450x450x 600mm, and support posts/corner
posts in cc 1:5:10 base of 450x450x 450mm including earth work
525 26.6 RM 276.8
excavation, including cost of all material like precast RCC posts, CC
1:5:10, bolts,washers, nuts, all labour charges etc., complete for finished
item of work as per drawing and as directed (but excluding cost of G.I.
Chain link mesh, M.S. Flat, Steel reinforcement and its fabrication
charges, Hooks and Cost of Cement) Note:-i) The coarse aggregate for
casting precast RCC 1:2:4 fencing posts should be 20mm down size (65%
of 20-10mm and 35% of 10-4.75mm) graded crushed granite metal and
concrete is to be machine mixed and CC 1:5:10 concrete should be with
40mm crushed granite metal. ii). Basement is to be measured and paid
Supply of Galvanized steel barbed wire Conforming to IS 278 -1978 Type
526 26.7 Kg 78.9
A -4 Point barbs round both line wires 75mm apart.
Supply of Hot dipped Galvanized Iron chain link mesh 8 gauge (4.0 mm)
527 26.8 Sqm 458.7
as per IS 2721 - 1979 (50mm x 50mm)
Labour charges for fixing Companys chain link fence duly cutting to the
1185 26.9 required sizes, fixed with MS Flats on existing pre cast RCC / MS Angle Sqm 8.1
posts with Companys material.
27.WATER SUPPLY WORKS
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Supplying and laying of rough stone boulders other than granite variety
528 27.1.1 (225mm size) in filter beds with all leads and lifts (Note: 2/5th (40%) will Cum 338.4
be deducted for voids)
Removal and refilling of coarse aggregate / boulders in the filter beds,
537 27.1.10 Cum 674
duly cleaning the same with all leads and lifts
Supplying and laying of 75 to 100mm size metal of granite variety in filter
529 27.1.2 beds with all leads and lifts ( Note: 1/13 th will be deducted for voids) Cum 576.4
Supplying and laying of 40mm size granite variety metal in filter beds
530 27.1.3 with all leads and lifts ( Note: 1/13 th will be deducted for voids) Cum 1003.8
Supplying and laying of 20mm size Crushed granite variety metal in filter
531 27.1.4 beds with all leads and lifts ( Note: 1/13 th will be deducted for voids) Cum 1404.2
Supplying and laying of 12mm size Crushed granite variety metal in filter
532 27.1.5 beds with all leads and lifts ( Note: 1/13 th will be deducted for voids) Cum 1276.4
Supply of HDPE flange joints including 2Nos. of pipe ends long neck and
2Nos. of MS flanges with all contractor’s materials such as bolts, nuts,
washers, rubber packing etc. and including conveyance charges etc.
592 27.12.10 Set 7301.6
complete. (labour charges for fixing is included in laying of pipe line
item). - 315mm dia HDPE flange joints
Supply of HDPE flange joints including 2Nos. of pipe ends long neck and
2Nos. of MS flanges with all contractor’s materials such as bolts, nuts,
washers, rubber packing etc. and including conveyance charges etc.
584 27.12.2 Set 1621.1
complete. (labour charges for fixing is included in laying of pipe line
item). - 125mm dia HDPE flange joints
Supply of HDPE flange joints including 2Nos. of pipe ends long neck and
2Nos. of MS flanges with all contractor’s materials such as bolts, nuts,
washers, rubber packing etc. and including conveyance charges etc.
585 27.12.3 Set 1677.9
complete. (labour charges for fixing is included in laying of pipe line
item). - 140mm dia HDPE flange joints
Supply of HDPE flange joints including 2Nos. of pipe ends long neck and
2Nos. of MS flanges with all contractor’s materials such as bolts, nuts,
washers, rubber packing etc. and including conveyance charges etc.
586 27.12.4 Set 2349.7
complete. (labour charges for fixing is included in laying of pipe line
item). - 160mm dia HDPE flange joints
Supply of HDPE flange joints including 2Nos. of pipe ends long neck and
2Nos. of MS flanges with all contractor’s materials such as bolts, nuts,
washers, rubber packing etc. and including conveyance charges etc.
587 27.12.5 Set 3183.7
complete. (labour charges for fixing is included in laying of pipe line
item). - 180mm dia HDPE flange joints
Supply of HDPE flange joints including 2Nos. of pipe ends long neck and
2Nos. of MS flanges with all contractor’s materials such as bolts, nuts,
washers, rubber packing etc. and including conveyance charges etc.
588 27.12.6 Set 4041.1
complete. (labour charges for fixing is included in laying of pipe line
item). - 200mm dia HDPE flange joints
Supply of HDPE flange joints including 2Nos. of pipe ends long neck and
2Nos. of MS flanges with all contractor’s materials such as bolts, nuts,
washers, rubber packing etc. and including conveyance charges etc.
589 27.12.7 Set 4734.2
complete. (labour charges for fixing is included in laying of pipe line
item). - 225mm dia HDPE flange joints
Supply of HDPE flange joints including 2Nos. of pipe ends long neck and
2Nos. of MS flanges with all contractor’s materials such as bolts, nuts,
washers, rubber packing etc. and including conveyance charges etc.
590 27.12.8 Set 5700.9
complete. (labour charges for fixing is included in laying of pipe line
item). - 250mm dia HDPE flange joints
Supply of HDPE flange joints including 2Nos. of pipe ends long neck and
2Nos. of MS flanges with all contractor’s materials such as bolts, nuts,
washers, rubber packing etc. and including conveyance charges etc.
591 27.12.9 Set 6341.7
complete. (labour charges for fixing is included in laying of pipe line
item). - 280mm dia HDPE flange joints
Labour charges for Laying and jointing of HDPE pipes by butt fusion
593 27.13.1 welding as per IS:7634 – part-II/1975 including fixing charges for Specials RM 70.6
and fittings, etc., - 110 mm OD pipe
Labour charges for Laying and jointing of HDPE pipes by butt fusion
602 27.13.10 welding as per IS:7634 – part-II/1975 including fixing charges for Specials RM 233
and fittings, etc., - 315 mm OD pipe
Labour charges for Laying, jointing and testing of HDPE pipes by butt
1214 27.13.11 RM 50.5
fusion welding as per IS:7634 ¿ part-II/1975 - for OD 63mm
Labour charges for Laying and jointing of HDPE pipes by butt fusion
594 27.13.2 welding as per IS:7634 – part-II/1975 including fixing charges for Specials RM 84.8
and fittings, etc., - 125 mm OD pipe
Labour charges for Laying and jointing of HDPE pipes by butt fusion
595 27.13.3 welding as per IS:7634 – part-II/1975 including fixing charges for Specials RM 88.1
and fittings, etc., - 140 mm OD pipe
Labour charges for Laying and jointing of HDPE pipes by butt fusion
596 27.13.4 welding as per IS:7634 – part-II/1975 including fixing charges for Specials RM 95.3
and fittings, etc., - 160 mm OD pipe
Labour charges for Laying and jointing of HDPE pipes by butt fusion
597 27.13.5 welding as per IS:7634 – part-II/1975 including fixing charges for Specials RM 105.1
and fittings, etc., - 180 mm OD pipe
Labour charges for Laying and jointing of HDPE pipes by butt fusion
598 27.13.6 welding as per IS:7634 – part-II/1975 including fixing charges for Specials RM 113.6
and fittings, etc., - 200 mm OD pipe
Labour charges for Laying and jointing of HDPE pipes by butt fusion
599 27.13.7 welding as per IS:7634 – part-II/1975 including fixing charges for Specials RM 125.9
and fittings, etc., - 225 mm OD pipe
Labour charges for Laying and jointing of HDPE pipes by butt fusion
600 27.13.8 welding as per IS:7634 – part-II/1975 including fixing charges for Specials RM 132.8
and fittings, etc., - 250 mm OD pipe
Labour charges for Laying and jointing of HDPE pipes by butt fusion
601 27.13.9 welding as per IS:7634 – part-II/1975 including fixing charges for Specials RM 146.3
and fittings, etc., - 280 mm OD pipe
Supplying, Laying and Jointing of AC pressure pipes (Class-15) with AC
Couplings with Rubber Rings as per BIS no: 1592/2003 duly marked with
603 27.14.1 ISI Mark complete including transportation to site. Rate is inclusive of Rm 735.8
CID Joints at every 5th joint, Rubber Rings, bolts and nuts etc., - For M &
R Works only - 150 mm Dia
Supplying, Laying and Jointing of AC pressure pipes (Class-15) with AC
Couplings with Rubber Rings as per BIS no: 1592/2003 duly marked with
604 27.14.2 ISI Mark complete including transportation to site. Rate is inclusive of Rm 1169.9
CID Joints at every 5th joint, Rubber Rings, bolts and nuts etc., - For M &
R Works only - 200 mm Dia
Supplying, Laying and Jointing of AC pressure pipes (Class-15) with AC
Couplings with Rubber Rings as per BIS no: 1592/2003 duly marked with
605 27.14.3 ISI Mark complete including transportation to site. Rate is inclusive of Rm 1466.9
CID Joints at every 5th joint, Rubber Rings, bolts and nuts etc., - For M &
R Works only - 250 mm Dia
Supplying, Laying and Jointing of AC pressure pipes (Class-15) with AC
Couplings with Rubber Rings as per BIS no: 1592/2003 duly marked with
606 27.14.4 ISI Mark complete including transportation to site. Rate is inclusive of Rm 2000.9
CID Joints at every 5th joint, Rubber Rings, bolts and nuts etc., - For M &
R Works only - 300 mm Dia
Supply of A.C. Couplings including cost of rubber rings to suit AC
607 27.15.1 pressure pipes, transportation to site of work. (Class-15) - 150mm Dia Set 351.1
Supply of Cast Iron detachable joints with drill/core hole including ISI
marked rubber rings of IS 10292-1988, bolts ,and nuts conforming to IS
1363- part I and part III/1984 suitable for AC pressure pipes of class 15 ,
611 27.16.1 including cost and conveyance of CID joints, rubber, rings , bolts, nuts Set 732.6
etc, including transportation to work site complete for finished item of
work as directed- 150 mm Dia
Supply of Cast Iron detachable joints with drill/core hole including ISI
marked rubber rings of IS 10292-1988, bolts ,and nuts conforming to IS
1363- part I and part III/1984 suitable for AC pressure pipes of class 15 ,
612 27.16.2 including cost and conveyance of CID joints, rubber, rings , bolts, nuts Set 1021.2
etc, including transportation to work site complete for finished item of
work as directed- 200 mm Dia
Supply of Cast Iron detachable joints with drill/core hole including ISI
marked rubber rings of IS 10292-1988, bolts ,and nuts conforming to IS
1363- part I and part III/1984 suitable for AC pressure pipes of class 15 ,
613 27.16.3 including cost and conveyance of CID joints, rubber, rings , bolts, nuts Set 1324.7
etc, including transportation to work site complete for finished item of
work as directed- 250 mm Dia
Supply of Cast Iron detachable joints with drill/core hole including ISI
marked rubber rings of IS 10292-1988, bolts ,and nuts conforming to IS
1363- part I and part III/1984 suitable for AC pressure pipes of class 15 ,
614 27.16.4 including cost and conveyance of CID joints, rubber, rings , bolts, nuts Set 1591.4
etc, including transportation to work site complete for finished item of
work as directed- 300 mm Dia
Labour charges for Laying and Jointing M.S Pipes, including cost of site
631 27.23.1 welding jointing materials and Hydrostatic pressure filed test complete. - RM 978.6
500mm Dia
Labour charges for Laying and Jointing M.S Pipes, including cost of site
632 27.23.2 welding jointing materials and Hydrostatic pressure filed test complete. - RM 1208.5
600mm Dia
Supplying, laying and Jointing of Centrifugally cast (spun) ductile iron
pressure pipes for water, gas and sewage with socket & spigot ends
conforming to IS.: 8329/2000 in standard working lengths of 4, 5, 5.5 & 6
metre with push-on-joint (rubber gasket D jointing) with cement mortar
lining inside the pipes, with outside zinc coating carefully into trenches
633 27.24.1 and laying them true to alignment and gradient, including the cost of the RM 4637
gasket, testing to required pressure, etc. complete. (Reference to
specifications. BIS No. 3114/94/12288:1987) Rates are excluding cost of
specials and transportation, -K9 Pipe. - 350mm Dia
Labour charges for Laying of D.I. Pipes (all classes) and specials (fittings)
with s/s ends carefully into trenches and laying them true to alignment
and gradient, Jointing pipes and fittings with rubber gasket (push-on-
joint), including the cost of the gasket, all sundries filling with water, and
651 27.28.2 RM 387.9
testing to required pressure, etc. complete and including all sundries but
excluding cost and conveyance of pipes and specials (Reference to
specifications. BIS No. 3114/94/12288:1987) - 450 mm dia pipe
Labour charges for Laying of D.I. Pipes (all classes) and specials (fittings)
with s/s ends carefully into trenches and laying them true to alignment
and gradient, Jointing pipes and fittings with rubber gasket (push-on-
joint), including the cost of the gasket, all sundries filling with water, and
652 27.28.3 RM 596.1
testing to required pressure, etc. complete and including all sundries but
excluding cost and conveyance of pipes and specials (Reference to
specifications. BIS No. 3114/94/12288:1987) - 600 mm dia pipe
Labour charges for Laying of 200mm Dia D.I. Pipes (all classes) and
specials (fittings) with s/s ends carefully into trenches and laying them
true to alignment and gradient, Jointing pipes and fittings with rubber
gasket (push-on-joint), including the cost of the gasket, all sundries filling
1176 27.28.4 RM 136
with water, and testing to required pressure, etc. complete and including
all sundries but excluding cost and conveyance of pipes and specials
(Reference to specifications. BIS No. 3114/94/12288:1987)
Labour charges for Laying of 250mm Dia D.I. Pipes (all classes) and
specials (fittings) with s/s ends carefully into trenches and laying them
true to alignment and gradient, Jointing pipes and fittings with rubber
gasket (push-on-joint), including the cost of the gasket, all sundries filling
1188 27.28.5 RM 180.9
with water, and testing to required pressure, etc. complete and including
all sundries but excluding cost and conveyance of pipes and specials
(Reference to specifications. BIS No. 3114/94/12288:1987)
Labour charges for Laying of D.I. Pipes (all classes) and specials (fittings)
with flanged ends carefully into trench and laying them true to alignment
and gradient Jointing pipes, fittings and valves with flanged ends
including cost of jointing materials such as bolts, rubber insertion, white
653 27.29.1 lead including filling with water and testing to required pressure RM 426.3
complete and including all sundries but excluding cost and conveyance
of pipes and fittings. (Reference to specifications. BIS No.3114/1994) -
350 mm dia pipe
Labour charges for Laying of D.I. Pipes (all classes) and specials (fittings)
with flanged ends carefully into trench and laying them true to alignment
and gradient Jointing pipes, fittings and valves with flanged ends
including cost of jointing materials such as bolts, rubber insertion, white
654 27.29.2 lead including filling with water and testing to required pressure RM 698.6
complete and including all sundries but excluding cost and conveyance
of pipes and fittings. (Reference to specifications. BIS No.3114/1994) -
450 mm dia pipe
Labour charges for Laying of D.I. Pipes (all classes) and specials (fittings)
with flanged ends carefully into trench and laying them true to alignment
and gradient Jointing pipes, fittings and valves with flanged ends
including cost of jointing materials such as bolts, rubber insertion, white
655 27.29.3 lead including filling with water and testing to required pressure RM 1105.5
complete and including all sundries but excluding cost and conveyance
of pipes and fittings. (Reference to specifications. BIS No.3114/1994) -
600 mm dia pipe
Supplying, Laying and Jointing 100mm dia G.I. pipes Medium grade (B-
class) as per IS 1239, ISI mark with Sockets and other specials including
transportation and cost of jointing materials like lead, hemp yarn etc.,
539 27.3 RM 904.5
(excavation of trench and refilling trenches after laying and jointing pipes
will be paid separately). Cost of MS flanges will be paid separately.
Supplying and fixing of CI D/F Sluice valves conforming to IS 14846 /2000
with amendments No. 1&2 heavy duty with CI grade FG 260 as per IS:
210. Two coats of primer suitable for EPOXY PAINTS finish shall be
applied to all metal suface and finally two coats of Epoxy Paint. The
656 27.30.1 Valves shall be tested for (closed end Test) against Hydrostaic test Each 5106.9
requirement. The rates are including transportation, and cost of bolts,
nuts, rubber insertion etc., complete. The operation can be done with
hand wheel / cap. ISI Marked. - PN-1.0 - 50 mm Dia
Supplying and fixing of CI D/F non return valves Heavy Duty Round Body
conforming to IS 5312 / Part 1/ 1984. with amendments No. 1&2 heavy
duty with CI grade FG 260 as per IS: 210. Two coats of primer suitable for
EPOXY PAINTS finish shall be applied to all metal suface and finally two
668 27.32.1 coats of Epoxy Paint. The Valves shall be tested for (closed end Test) Each 9969.1
against Hydrostaic test requirement. The rates are including
transportation, etc., complete. The operation can be done with
handwheel/cap. ISI Marked. - PN-1.0. - 150 mm Dia
Supplying and fixing of CI D/F non return valves Heavy Duty Round Body
conforming to IS 5312 / Part 1/ 1984. with amendments No. 1&2 heavy
duty with CI grade FG 260 as per IS: 210. Two coats of primer suitable for
EPOXY PAINTS finish shall be applied to all metal suface and finally two
669 27.32.2 coats of Epoxy Paint. The Valves shall be tested for (closed end Test) Each 19193.9
against Hydrostaic test requirement. The rates are including
transportation, etc., complete. The operation can be done with
handwheel/cap. ISI Marked. - PN-1.0. - 200 mm Dia
Supplying and fixing of CI D/F non return valves Heavy Duty Round Body
conforming to IS 5312 / Part 1/ 1984. with amendments No. 1&2 heavy
duty with CI grade FG 260 as per IS: 210. Two coats of primer suitable for
EPOXY PAINTS finish shall be applied to all metal suface and finally two
670 27.32.3 coats of Epoxy Paint. The Valves shall be tested for (closed end Test) Each 27892.3
against Hydrostaic test requirement. The rates are including
transportation, etc., complete. The operation can be done with
handwheel/cap. ISI Marked. - PN-1.0. - 250 mm Dia
Supplying and fixing of CI D/F non return valves Heavy Duty Round Body
conforming to IS 5312 / Part 1/ 1984. with amendments No. 1&2 heavy
duty with CI grade FG 260 as per IS: 210. Two coats of primer suitable for
EPOXY PAINTS finish shall be applied to all metal suface and finally two
671 27.32.4 coats of Epoxy Paint. The Valves shall be tested for (closed end Test) Each 41375.6
against Hydrostaic test requirement. The rates are including
transportation, etc., complete. The operation can be done with
handwheel/cap. ISI Marked. - PN-1.0. - 300 mm Dia
Supplying and fixing of CI D/F non return valves Heavy Duty Round Body
conforming to IS 5312 / Part 1/ 1984. with amendments No. 1&2 heavy
duty with CI grade FG 260 as per IS: 210. Two coats of primer suitable for
EPOXY PAINTS finish shall be applied to all metal suface and finally two
672 27.33.1 coats of Epoxy Paint. The Valves shall be tested for (closed end Test) Each 12230.6
against Hydrostaic test requirement. The rates are including
transportation, etc., complete. The operation can be done with
handwheel/cap. ISI Marked. - PN-1.6 - 150 mm Dia
Supplying and fixing of CI D/F non return valves Heavy Duty Round Body
conforming to IS 5312 / Part 1/ 1984. with amendments No. 1&2 heavy
duty with CI grade FG 260 as per IS: 210. Two coats of primer suitable for
EPOXY PAINTS finish shall be applied to all metal suface and finally two
673 27.33.2 coats of Epoxy Paint. The Valves shall be tested for (closed end Test) Each 23706.7
against Hydrostaic test requirement. The rates are including
transportation, etc., complete. The operation can be done with
handwheel/cap. ISI Marked. - PN-1.6 - 200 mm Dia
Supplying and fixing of CI D/F non return valves Heavy Duty Round Body
conforming to IS 5312 / Part 1/ 1984. with amendments No. 1&2 heavy
duty with CI grade FG 260 as per IS: 210. Two coats of primer suitable for
EPOXY PAINTS finish shall be applied to all metal suface and finally two
674 27.33.3 coats of Epoxy Paint. The Valves shall be tested for (closed end Test) Each 34440.6
against Hydrostaic test requirement. The rates are including
transportation, etc., complete. The operation can be done with
handwheel/cap. ISI Marked. - PN-1.6 - 250 mm Dia
Supplying and fixing of CI D/F non return valves Heavy Duty Round Body
conforming to IS 5312 / Part 1/ 1984. with amendments No. 1&2 heavy
duty with CI grade FG 260 as per IS: 210. Two coats of primer suitable for
EPOXY PAINTS finish shall be applied to all metal suface and finally two
675 27.33.4 coats of Epoxy Paint. The Valves shall be tested for (closed end Test) Each 51221.3
against Hydrostaic test requirement. The rates are including
transportation, etc., complete. The operation can be done with
handwheel/cap. ISI Marked. - PN-1.6 - 300 mm Dia
Labour charges for fixing C.I. sluice valves / Non return Valves including
676 27.34.1 Each 195.6
cost of bolts, nuts, rubber insertion - 50 mm dia
Labour charges for fixing C.I. sluice valves / Non return Valves including
677 27.34.2 Each 528.2
cost of bolts, nuts, rubber insertion - 100 mm dia
Labour charges for fixing C.I. sluice valves / Non return Valves including
678 27.34.3 Each 918.8
cost of bolts, nuts, rubber insertion - 150 mm dia
Labour charges for fixing C.I. sluice valves / Non return Valves including
679 27.34.4 Each 1140.8
cost of bolts, nuts, rubber insertion - 200 mm dia
Labour charges for fixing C.I. sluice valves / Non return Valves including
680 27.34.5 Each 1710.2
cost of bolts, nuts, rubber insertion - 250 mm dia
Labour charges for fixing C.I. sluice valves / Non return Valves including
681 27.34.6 Each 1983.8
cost of bolts, nuts, rubber insertion - 300 mm dia
Labour charges for fixing C.I. sluice valves / Non return Valves including
682 27.34.7 Each 5667.6
cost of bolts, nuts, rubber insertion - 450 mm dia
Labour charges for fixing C.I. sluice valves / Non return Valves including
683 27.34.8 Each 10048.8
cost of bolts, nuts, rubber insertion - 600 mm dia
Supplying and fixing of CI D/F Kinetic Air valves Heavy Duty suitable for
working pressure upto 10 Kg / cm2 without isolating Valve Conforming
684 27.35.1 to IS 14845 including transportation, and including cost of jointing Each 4602.1
materials such as bolts, nuts and rubber insertions etc., complete (PN
1.0) - 50 mm Dia
Supplying and fixing of CI D/F Kinetic Air valves Heavy Duty suitable for
working pressure upto 10 Kg / cm2 without isolating Valve Conforming
685 27.35.2 to IS 14845 including transportation, and including cost of jointing Each 6131.8
materials such as bolts, nuts and rubber insertions etc., complete (PN
1.0) - 80 mm Dia
Supplying and fixing of CI D/F Kinetic Air valves Heavy Duty suitable for
working pressure upto 10 Kg / cm2 without isolating Valve Conforming
686 27.35.3 to IS 14845 including transportation, and including cost of jointing Each 8226.1
materials such as bolts, nuts and rubber insertions etc., complete (PN
1.0) - 100 mm Dia
Supplying and fixing of CI D/F Kinetic Air valves Heavy Duty suitable for
working pressure upto 10 Kg / cm2 without isolating Valve Conforming
687 27.35.4 to IS 14845 including transportation, and including cost of jointing Each 18259
materials such as bolts, nuts and rubber insertions etc., complete (PN
1.0) - 150 mm Dia
Supplying and fixing of CI D/F Kinetic Air valves Heavy Duty suitable for
working pressure upto 16 Kg / cm2 without isolating Valve Conforming
688 27.36.1 to IS 14845 including transportation, and including cost of jointing Each 5012.1
materials such as bolts, nuts and rubber insertions etc., complete (PN
1.6) - 50 mm Dia
Supplying and fixing of CI D/F Kinetic Air valves Heavy Duty suitable for
working pressure upto 16 Kg / cm2 without isolating Valve Conforming
689 27.36.2 to IS 14845 including transportation, and including cost of jointing Each 7451.3
materials such as bolts, nuts and rubber insertions etc., complete (PN
1.6) - 80 mm Dia
Supplying and fixing of CI D/F Kinetic Air valves Heavy Duty suitable for
working pressure upto 16 Kg / cm2 without isolating Valve Conforming
690 27.36.3 to IS 14845 including transportation, and including cost of jointing Each 8959.8
materials such as bolts, nuts and rubber insertions etc., complete (PN
1.6) - 100 mm Dia
Supplying and fixing of CI D/F Kinetic Air valves Heavy Duty suitable for
working pressure upto 16 Kg / cm2 without isolating Valve Conforming
691 27.36.4 to IS 14845 including transportation, and including cost of jointing Each 19912.8
materials such as bolts, nuts and rubber insertions etc., complete (PN
1.6) - 150 mm Dia
Labour charges for fixing Air Valves including cost of jointing materials
692 27.37.1 such as bolts, nuts and rubber insertions etc., complete. - 50 mm dia Each 301.3
Labour charges for fixing Air Valves including cost of jointing materials
693 27.37.2 such as bolts, nuts and rubber insertions etc., complete. - 80 mm dia Each 378.7
Labour charges for fixing Air Valves including cost of jointing materials
694 27.37.3 such as bolts, nuts and rubber insertions etc., complete. - 100 mm dia Each 516.1
Labour charges for fixing Air Valves including cost of jointing materials
695 27.37.4 such as bolts, nuts and rubber insertions etc., complete. - 150 mm dia Each 889.5
Labour charges for laying and jointing of 200mm dia M.S pipes and
fittings with flanged ends, with contractors Bolts & Nuts , gasket, etc.
696 27.38.1 RM 119.2
complete as directed (Note :- Excavation of trench and refilling wherever
required are to be paid separately.)
Labour charges for laying and jointing of 200mm dia M.S pipes and
fittings with flanged ends, with companys Bolts & Nuts , gasket, etc.
697 27.38.2 RM 63.4
complete as directed (Note :- Excavation of trench and refilling wherever
required are to be paid separately.)
Labour Charges for Dismantling / Removing of 200 mm Dia M.S. Pipes
and fittings with Flanged ends carefully from the trenches including
698 27.38.3 RM 31.7
stacking at the places specified and as directed by the Engineer - in -
charge.
Bailing out water from the pipe line trenches with oil engine driven
pump sets, including hire charges, fuel charges & wages for Driver and
699 27.39.1 Helper. NOTE:- The rate is payable on the total H.P. hours ignoring HP/ Hour 61.4
fractions less than 0.5 HP hour & rounding off 0.5 HP hour or more to the
next higher integer.
Bailing out water from the pipe line trenches with Electric Driven pump
set including hire charges, current charges & wages for Driver and
700 27.39.2 Helper. NOTE:- The rate is payable on the total H.P. hours ignoring HP/ Hour 45.5
fractions less than 0.5 HP hour & rounding off 0.5 HP hour or more to the
next higher integer.
Supply of M.S Threaded flanges including necessary packing materials,
bolts, washers & nuts and transportation complete. (Fixing charges are
540 27.4.1 Pair 385.9
included in pipe line Item.) - 50mm dia ; 12mm thick
Removing old G.I.pipes and specials / fittings and cleaning, scraping the
pipes, hoisting and keeping with in 50m lead but excluding earth work
701 27.40.1 RM 33.4
excavation of trenches and refilling - 100 mm dia nominal bore
Removing old G.I.pipes and specials / fittings and cleaning, scraping the
pipes, hoisting and keeping with in 50m lead but excluding earth work
702 27.40.2 RM 52.8
excavation of trenches and refilling - 150 mm dia nominal bore
Removing old PVC pipes and specials / fittings and cleaning, scraping the
pipes, hoisting and keeping with in 50m lead but excluding earth work
703 27.41.1 RM 2.5
excavation of trenches and refilling - 63 mm dia pipe
Removing old PVC pipes and specials / fittings and cleaning, scraping the
pipes, hoisting and keeping with in 50m lead but excluding earth work
704 27.41.2 RM 4.4
excavation of trenches and refilling - 110 mm dia pipe
Removing old PVC pipes and specials / fittings and cleaning, scraping the
pipes, hoisting and keeping with in 50m lead but excluding earth work
705 27.41.3 RM 6.5
excavation of trenches and refilling - 160 mm dia pipe
Removing old HDPE pipes and specials / fittings and cleaning, scraping
the pipes, hoisting and keeping with in 50m lead but excluding earth
706 27.42.1 RM 35.3
work excavation of trenches and refilling (By Butt Fussion welding)- 110
mm OD pipe
Removing old HDPE pipes and specials / fittings and cleaning, scraping
the pipes, hoisting and keeping with in 50m lead but excluding earth
715 27.42.10 RM 116.5
work excavation of trenches and refilling (By Butt Fussion welding)- 315
mm OD pipe
Removing old HDPE pipes and specials / fittings and cleaning, scraping
the pipes, hoisting and keeping with in 50m lead but excluding earth
707 27.42.2 RM 42.4
work excavation of trenches and refilling (By Butt Fussion welding)- 125
mm OD pipe
Removing old HDPE pipes and specials / fittings and cleaning, scraping
the pipes, hoisting and keeping with in 50m lead but excluding earth
708 27.42.3 RM 44.1
work excavation of trenches and refilling (By Butt Fussion welding)- 140
mm OD pipe
Removing old HDPE pipes and specials / fittings and cleaning, scraping
the pipes, hoisting and keeping with in 50m lead but excluding earth
709 27.42.4 RM 47.6
work excavation of trenches and refilling (By Butt Fussion welding)- 160
mm OD pipe
Removing old HDPE pipes and specials / fittings and cleaning, scraping
the pipes, hoisting and keeping with in 50m lead but excluding earth
710 27.42.5 RM 52.6
work excavation of trenches and refilling (By Butt Fussion welding)- 180
mm OD pipe
Removing old HDPE pipes and specials / fittings and cleaning, scraping
the pipes, hoisting and keeping with in 50m lead but excluding earth
711 27.42.6 RM 56.8
work excavation of trenches and refilling (By Butt Fussion welding)- 200
mm OD pipe
Removing old HDPE pipes and specials / fittings and cleaning, scraping
the pipes, hoisting and keeping with in 50m lead but excluding earth
712 27.42.7 RM 63
work excavation of trenches and refilling (By Butt Fussion welding)- 225
mm OD pipe
Removing old HDPE pipes and specials / fittings and cleaning, scraping
the pipes, hoisting and keeping with in 50m lead but excluding earth
713 27.42.8 RM 66.4
work excavation of trenches and refilling (By Butt Fussion welding)- 250
mm OD pipe
Removing old HDPE pipes and specials / fittings and cleaning, scraping
the pipes, hoisting and keeping with in 50m lead but excluding earth
714 27.42.9 RM 73.1
work excavation of trenches and refilling (By Butt Fussion welding)- 280
mm OD pipe
Cutting road surface including stacking of excavated materials for pipe
716 27.43.1 line trench work. - Cutting open B.T road surface including water bound Cum 1229.8
macadam
Cutting road surface including stacking of excavated materials for pipe
717 27.43.2 Cum 2560.4
line trench work. - Cutting open C.C. road surface
Cutting road surface including stacking of excavated materials for pipe
718 27.43.3 line trench work. - Cutting open water bound macadam road including Cum 314.9
soling
Construction of 2,00,000 Litres capacity OHSRs/ ELSRs including fixtures
with a staging of 12.00m with seismic analysis for Zone-III including cost
of Cement and Reinforcement steel of Fe- 500 /500D confirming to IS
1786 - 2008 from primary producers like TATA, SAIL, VSP, Jindal (Cement
1314 27.45.10 and steel will not be issued by the company). Considering cement and Litre 23.4
steel rates for the month of April-2017 as per C.Memo.No.146/Cement
& Steel/T2/2016-17; Dated 08.05.2017 and with a wind pressure up to
250Kg/Sqm
Construction of 20,000 Litres capacity OHSRs/ ELSRs including fixtures
with a staging of 12.00m with seismic analysis for Zone-III including cost
of Cement and Reinforcement steel of Fe- 500 /500D confirming to IS
1786 - 2008 from primary producers like TATA, SAIL, VSP, Jindal (Cement
1216 27.45.3 and steel will not be issued by the company). Considering cement and Litre 57.8
steel rates for the month of November-2016 as per
C.Memo.No.146/Cement & Steel/T2/2016-17; Dated 24.11.2016 and
with a wind pressure up to 250Kg/Sqm
Welding charges for M.S / G.I pipe joint i.e., pipe to pipe or flange to pipe
with all companys pipes / fittings but with contractors welding plant and
727 27.47.1 Each 79.8
electrodes etc., complete as directed - 50mm dia M.S / G.I pipe joint
Welding charges for M.S / G.I pipe joint i.e., pipe to pipe or flange to pipe
with all companys pipes / fittings but with contractors welding plant and
728 27.47.2 Each 121.4
electrodes etc., complete as directed - 100mm dia M.S / G.I pipe joint
Welding charges for M.S / G.I pipe joint i.e., pipe to pipe or flange to pipe
with all companys pipes / fittings but with contractors welding plant and
729 27.47.3 Each 217.3
electrodes etc., complete as directed - 150mm dia M.S / G.I pipe joint
Welding charges for M.S / G.I pipe joint i.e., pipe to pipe or flange to pipe
with all companys pipes / fittings but with contractors welding plant and
730 27.47.4 Each 307.2
electrodes etc., complete as directed - 200mm dia M.S / G.I pipe joint
Labour charges for laying and jointing of 110mm OD HDPE pipes and
fittings with flanged ends, with Companys Bolts & Nuts etc. complete as
731 27.48.1 RM 16
directed (Note :- Excavation of trench and refilling wherever required are
to be paid separately.)
Labour charges for laying and jointing of 315mm OD HDPE pipes and
fittings with flanged ends, with Companys Bolts & Nuts etc. complete as
740 27.48.10 RM 51.7
directed (Note :- Excavation of trench and refilling wherever required are
to be paid separately.)
Labour charges for laying and jointing of 125mm OD HDPE pipes and
fittings with flanged ends, with Companys Bolts & Nuts etc. complete as
732 27.48.2 RM 17.4
directed (Note :- Excavation of trench and refilling wherever required are
to be paid separately.)
Labour charges for laying and jointing of 140mm OD HDPE pipes and
fittings with flanged ends, with Companys Bolts & Nuts etc. complete as
733 27.48.3 RM 19.6
directed (Note :- Excavation of trench and refilling wherever required are
to be paid separately.)
Labour charges for laying and jointing of 160mm OD HDPE pipes and
fittings with flanged ends, with Companys Bolts & Nuts etc. complete as
734 27.48.4 RM 24.8
directed (Note :- Excavation of trench and refilling wherever required are
to be paid separately.)
Labour charges for laying and jointing of 180mm OD HDPE pipes and
fittings with flanged ends, with Companys Bolts & Nuts etc. complete as
735 27.48.5 RM 27.8
directed (Note :- Excavation of trench and refilling wherever required are
to be paid separately.)
Labour charges for laying and jointing of 200mm OD HDPE pipes and
fittings with flanged ends, with Companys Bolts & Nuts etc. complete as
736 27.48.6 RM 31.3
directed (Note :- Excavation of trench and refilling wherever required are
to be paid separately.)
Labour charges for laying and jointing of 225mm OD HDPE pipes and
fittings with flanged ends, with Companys Bolts & Nuts etc. complete as
737 27.48.7 RM 36.5
directed (Note :- Excavation of trench and refilling wherever required are
to be paid separately.)
Labour charges for laying and jointing of 250mm OD HDPE pipes and
fittings with flanged ends, with Companys Bolts & Nuts etc. complete as
738 27.48.8 RM 42.2
directed (Note :- Excavation of trench and refilling wherever required are
to be paid separately.)
Labour charges for laying and jointing of 280mm OD HDPE pipes and
fittings with flanged ends, with Companys Bolts & Nuts etc. complete as
739 27.48.9 RM 43.4
directed (Note :- Excavation of trench and refilling wherever required are
to be paid separately.)
Removing of OD old HDPE pipes and specials / fittings with flanged ends
and cleaning, scraping the pipes, hoisting and keeping with in 50m lead
741 27.49.1 RM 8
but excluding earth work excavation of trenches and refilling - For
110mm OD
Removing of OD old HDPE pipes and specials / fittings with flanged ends
and cleaning, scraping the pipes, hoisting and keeping with in 50m lead
750 27.49.10 RM 25.9
but excluding earth work excavation of trenches and refilling - For 315
mm OD
Removing of OD old HDPE pipes and specials / fittings with flanged ends
and cleaning, scraping the pipes, hoisting and keeping with in 50m lead
742 27.49.2 RM 8.7
but excluding earth work excavation of trenches and refilling - For
125mm OD
Removing of OD old HDPE pipes and specials / fittings with flanged ends
and cleaning, scraping the pipes, hoisting and keeping with in 50m lead
743 27.49.3 RM 9.8
but excluding earth work excavation of trenches and refilling - For 140
mm OD
Removing of OD old HDPE pipes and specials / fittings with flanged ends
and cleaning, scraping the pipes, hoisting and keeping with in 50m lead
744 27.49.4 RM 12.4
but excluding earth work excavation of trenches and refilling - For 160
mm OD
Removing of OD old HDPE pipes and specials / fittings with flanged ends
and cleaning, scraping the pipes, hoisting and keeping with in 50m lead
745 27.49.5 RM 13.9
but excluding earth work excavation of trenches and refilling - For
180mm OD
Removing of OD old HDPE pipes and specials / fittings with flanged ends
and cleaning, scraping the pipes, hoisting and keeping with in 50m lead
746 27.49.6 RM 15.6
but excluding earth work excavation of trenches and refilling - For
200mm OD
Removing of OD old HDPE pipes and specials / fittings with flanged ends
and cleaning, scraping the pipes, hoisting and keeping with in 50m lead
747 27.49.7 RM 18.2
but excluding earth work excavation of trenches and refilling - For 225
mm OD
Removing of OD old HDPE pipes and specials / fittings with flanged ends
and cleaning, scraping the pipes, hoisting and keeping with in 50m lead
748 27.49.8 RM 21.1
but excluding earth work excavation of trenches and refilling - For 250
mm OD
Removing of OD old HDPE pipes and specials / fittings with flanged ends
and cleaning, scraping the pipes, hoisting and keeping with in 50m lead
749 27.49.9 RM 21.7
but excluding earth work excavation of trenches and refilling - For 280
mm OD
Labour charges for Laying and Jointing 100 mm dia G.I. pipes and
specials / fittings including cost of jointing materials like lead, hemp yarn
542 27.5 etc., but excluding the cost of pipes. (excavation of trench and refilling RM 67.6
trenches after laying and jointing pipes will be paid separately )
Labour charges for Laying and Jointing G.I. pipes and specials / fittings
including cost of jointing materials like lead, hemp yarn etc., but
1248 27.5.2 excluding the cost of pipes. (excavation of trench and refilling trenches RM 106.4
after laying and jointing pipes will be paid separately ) - For 150 mm dia
nominal bore
Labour charges for Dismantling / Removing of 200mm dia AC Pressure
pipes with CID joints and AC Couplings carefully from trenches but
751 27.50.1 excluding earth work excavation including stacking at the places Rm 55.4
specifeid and as directed by the Engineer-in-charge.- 200 mm Dia
Supplying and fixing of 250mm Dia CI D/F non return valves Heavy Duty
Round Body conforming to IS 5312 / Part 1/ 1984. with amendments No.
1&2 heavy duty with CI grade FG 260 as per IS: 210. Two coats of primer
suitable for EPOXY PAINTS finish shall be applied to all metal suface and
1186 27.55.2 finally two coats of Epoxy Paint. The Valves shall be tested for (closed Each 34440.6
end Test) against Hydrostaic test requirement. The rates are including
transportation, etc., complete. The operation can be done with
handwheel/cap. ISI Marked. - PN-1.6
Supplying and fixing of 80mm dia CI D/F Kinetic Air valves Heavy Duty
suitable for working pressure upto 16 Kg / cm2 without isolating Valve
1179 27.56.1 Conforming to IS 14845 including transportation, and including cost of Each 7451.3
jointing materials such as bolts, nuts and rubber insertions etc.,
complete (PN 1.6)
Supplying, laying and Jointing of Centrifugally cast (spun) ductile iron
pressure pipes for water, gas and sewage with Flanged (Welded) ends
conforming to IS:8329/2000 in standard working lengths of 1,2,3,4 &
5metre for classification K9 with cement mortar lining with push-on-joint
(rubber gasket D jointing) inside the pipes, with outside zinc coating
carefully into trenches and laying them true to alignment and gradient,
1270 27.57.1 including cost of jointing materials such as bolts, rubber insertion, white Each 10138.5
lead including filling with water, with lead up to 500 meters and testing
to required pressure complete. (Reference to specifications. BIS
No.3114/1994.) Rates are excluding cost of specials and transportation -
For 150mm dia - 4Mtrs. Length
Supplying, laying and Jointing of Centrifugally cast (spun) ductile iron
pressure pipes for water, gas and sewage with Flanged (Welded) ends
conforming to IS:8329/2000 in standard working lengths of 1,2,3,4 &
5metre for classification K9 with cement mortar lining with push-on-joint
(rubber gasket D jointing) inside the pipes, with outside zinc coating
carefully into trenches and laying them true to alignment and gradient,
1271 27.57.2 including cost of jointing materials such as bolts, rubber insertion, white Each 13729.9
lead including filling with water, with lead up to 500 meters and testing
to required pressure complete. (Reference to specifications. BIS
No.3114/1994.) Rates are excluding cost of specials and transportation -
For 200mm dia - 4Mtrs. Length
Labour charges for Laying and Jointing 100mm Dia G.I. pipes and fittings
1301 27.58.1 with flanged ends, with contractors Bolts & Nuts , gasket, etc. complete RM 67
as directed
Labour charges for Laying and Jointing 150mm Dia G.I. pipes and fittings
1300 27.58.2 with flanged ends, with contractors Bolts & Nuts , gasket, etc. complete RM 96.3
as directed
Labour charges for laying and jointing of 100mm dia G.I pipes and
1299 27.59.1 fittings with flanged ends, with companys Bolts & Nuts , gasket, etc. RM 32.5
complete as directed
Labour charges for laying and jointing of 150mm dia G.I pipes and
1298 27.59.2 fittings with flanged ends, with companys Bolts & Nuts , gasket, etc. RM 45.5
complete as directed
Supplying, Laying and Jointing of Unplasticised PVC pipes for potable
water supply conforming to IS 4985/2000 (Third revision), with bell ends
543 27.6.1 (socket) as per specifications including transportation to site of work and RM 90.5
cost of specials & jointing materials, etc., (Test pressure 6 kg/cm2). -
63mm Dia
Supplying, Laying and Jointing of Unplasticised PVC pipes for potable
water supply conforming to IS 4985/2000 (Third revision), with bell ends
544 27.6.2 (socket) as per specifications including transportation to site of work and RM 123.4
cost of specials & jointing materials, etc., (Test pressure 6 kg/cm2). -
75mm Dia
Supplying, Laying and Jointing of Unplasticised PVC pipes for potable
water supply conforming to IS 4985/2000 (Third revision), with bell ends
545 27.6.3 (socket) as per specifications including transportation to site of work and RM 253.6
cost of specials & jointing materials, etc., (Test pressure 6 kg/cm2). - 110
mm Dia
Supplying, Laying and Jointing of Unplasticised PVC pipes for potable
water supply conforming to IS 4985/2000 (Third revision), with bell ends
546 27.6.4 (socket) as per specifications including transportation to site of work and RM 535.2
cost of specials & jointing materials, etc., (Test pressure 6 kg/cm2). - 160
mm Dia
Labour Charges for Dismantling / Removing of 100 mm Dia GI Pipes and
fittings with Flanged ends carefully from the trenches including stacking
1297 27.60.1 RM 16.2
at the places specified and as directed by the Engineer - in - charge.
Labour charges for Laying and jointing of UPVC pressure pipes and
specials in ready made trenches including cost of jointing materials but
550 27.8.2 RM 6.4
excluding cost of pipes and specials. - 75 mm dia pipe
Labour charges for Laying and jointing of UPVC pressure pipes and
specials in ready made trenches including cost of jointing materials but
551 27.8.3 RM 9.4
excluding cost of pipes and specials. - 110 mm dia pipe
Labour charges for Laying and jointing of UPVC pressure pipes and
specials in ready made trenches including cost of jointing materials but
552 27.8.4 RM 13.6
excluding cost of pipes and specials. - 160 mm dia pipe
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Supplying, Laying and jointing of C.I. Pipes (all classes) and specials
754 28.1 (fittings) with s/s ends, including cost of pipes, rubber gasket (push-on- RM 528.5
joint), all sundries - 75 mm dia pipe
Construction of 900mm dia and 450mm depth circular manhole with CC
1:4:8 base of 150mm thick with 40 mm Crushed Granite metal, 225mm
thick Brick masonry walls in C.M 1:6 with Flyash bricks of size
225X100x60mm and having compressive stength of 50 kg/sqcm,
plastering with CM 1:4,12mm thick including rendering the surfaces
smooth both inside and outside and benching with 100mm thick CC
1:2:4 with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm)
771 28.1 graded Crushed Granite metal and channelling to required slope Each 3081.2
including supply and fixing precast RCC 1:2:4 cover of 50mm thick and
600mm dia using 20mm down size (65% of 20-10mm & 35% of 10-
4.75mm) graded Crushed Granite metal, including earth work excavation
to the required depth etc. complete for finished item of work (but
excluding cost of cement, steel and its fabrication charges.)
Supplying and fixing 25 mm G.I drain pipe with plug for tanks (Mud
925 28.1 Each 82.6
valve) including making a hole
926 28.101 Supplying and fixing 15mm holder bat clamps Each 15.2
927 28.102 Supplying and fixing 20mm holder bat clamps Each 21.4
928 28.103 Supplying and fixing 25mm holder bat clamps Each 26.7
Supplying and fixing 15mm nominal size 101.6mm CP finish iron body
929 28.104 Each 162.5
shower
930 28.105 Supplying and fixing NP soap dish heavy type with NP Screws Each 259.1
S&F CP finish steel towel rod of 600 mm long and 20 mm dia with
931 28.106 Each 394.1
brackets
932 28.107 Supplying & fixing NP coat hook Each 47.8
Supply of dust bins with RCC Hume pipes of 900mm dia of class NP2
933 28.108 0.80m to 0.85m in height with a minimum lead of 5 Km including Each 2081.6
stacking at site as directed
Conveyance charges for 900mm dia RCC plain ended pipes on all
weather roads including loading Unloading and stacking (per metre of
934 28.109 effective length) (for NP2 pipes). (Rate for every additional 1 Km. lead or KMRM 5.2
part there of beyond 5KM initial lead is only payable)
941 28.116 Supply of Plastic storage tank lid with hinges Each 67.1
Removing old G.I.pipes pipes and specials / fittings and cleaning,
scraping the pipes, hoisting and keeping with in 50m lead but excluding
942 28.117 RM 7.8
earth work excavation of trenches and refilling - up to 50mm dia
Supplying and Fixing best Indian make plastic seat and lid (Parryware /
943 28.118 Hindware/Neycer ) for European water closets with rubber or plastic Each 635.5
Buffers as per IS 2548-1996
Supply and Fixing of Supreme/ Ashirvad/ Astral/ Prince / Kisan or
equivalent premium make CPVC Pipes along with Fittings to meet the
944 28.119.1 RM 163.9
requirement of ASTM-D 2846 etc., complete - for 15.90mm OD Pipe -
SDR 11
Supply and Fixing of Supreme/ Ashirvad/ Astral/ Prince / Kisan or
equivalent premium make CPVC Pipes along with Fittings to meet the
945 28.119.2 RM 195.7
requirement of ASTM-D 2846 etc., complete - for 22.20mm OD Pipe -
SDR 11
Supply and Fixing of Supreme/ Ashirvad/ Astral/ Prince / Kisan or
equivalent premium make CPVC Pipes along with Fittings to meet the
946 28.119.3 RM 232.1
requirement of ASTM-D 2846 etc., complete - for 28.60mm OD Pipe -
SDR 11
Supply and Fixing of Supreme/ Ashirvad/ Astral/ Prince / Kisan or
equivalent premium make CPVC Pipes along with Fittings to meet the
947 28.119.4 RM 562
requirement of ASTM-D 2846 etc., complete - for 54.00mm OD Pipe -
SDR 11
Construction of 450mm x 450mm and 450mm depth Inspection
Chamber with CC 1:4:8 base of 150mm thick 40 mm Crushed Granite
metaland 225 mm thick Brick masonary walls in CM 1:6 with fly ash
bricks of size 225 x 100 x 60mm with 50kg/Sq. Cm Compressive strength
and plastering with CM 1:4; 12mm thick including rendering the surfaces
smooth both inside and outside and channelling to required slope
773 28.12 including supply and fixing precast RCC 1:2:4 cover of 50mm thick and Each 2052.6
600 X 600mm size with 20mm down size (65% of 20-10mm & 35% of 10-
4.75mm) graded Crushed Granite metal, including earthwork excavation
to the required depth etc; complete for finished item of work (but
excluding cost of cement steel and its fabrication charges.)
948 28.120.1 Supplying and fixing of CPVC unions - For 50mm (2 inch) union Each 353.1
949 28.120.2 Supplying and fixing of CPVC unions - For 25mm (1 inch) union Each 91.3
Supplying and fixing of CPVC unions - For 20mm (3/4 inch) union
950 28.120.3 Each 77.1
Supplying and fixing of CPVC unions - For 15 mm (1/2 inch) union
951 28.120.4 Each 57.7
Supplying and fixing of CPVC Ball Valve - For 50mm (2 inch) Ball Valve
952 28.121.1 Each 1069.3
Supplying and fixing of CPVC Ball Valve - For 25mm (1 inch) Ball Valve
953 28.121.2 Each 256.8
Supplying and fixing of CPVC Ball Valve - For 20mm (3/4 inch) Ball Valve
954 28.121.3 Each 182
Supplying and fixing of 15mm nominal size Chromium plated finish brass
over head shower arm of 450 mm long with 90 degree bend & wall
955 28.122 Each 1367.8
flange suitable for rain shower and with 10 years warranty
Supplying and fixing of 15mm Stainless steel flexible hose 1.0 m long for
956 28.123 Each 270.6
hand shower / health faucet with brass nuts
Supplying and fixing CP finish brass towel rod 600 mm long and 20 mm
957 28.124 Each 989.5
dia with brackets
Supplying and fixing Stainless steel 4 Inches dia round Grating with
958 28.125 Each 78.31
frame for nahany or floor trap cover with or without hole
Supplying and fixing of 15 mm brass body premium variety Chromium
Plated finish bib tap angular shape with wall flange of not less than 500
959 28.126 grams weight with quarter turn spindle with either internal or external Each 1103.2
threaded conenction conforming to IS 8931 and with 10 years warranty
963 28.13 Supplying and fixing CP finish brass soap dish Each 552.9
Supplying and fixing of Chrome plated finish stainless steel body Toilet
964 28.131 Each 814.8
paper holder with 10 years warranty
Supplying and fixing of Chrome plated finish stainless steel body Towel
965 28.132 Each 930.3
Ring with 10 years warranty
966 28.133 Supplying and fixing CP finish brass metal body single coat hook Each 380.4
967 28.134 Supplying and fixing Double coat hook with 10 years warranty Each 684.6
Supply and fixing of 15 mm premium variety Chromium plated finish
brass body wall mixer with hand shower with a provision for over head
1220 28.135 shower with 115 mm long bend pipe on upper side, connecting legs & Each 3298.3
wall flanges conforming to IS 8931 with 10 years warranty
Supplying & fixing 50.8 cm dia C.I. Man hole frame & cover for 914.4mm
775 28.14 Each 1266.1
dia chamber (20 Kgs - Light weight)
Supplying & fixing 50.8 cm dia C.I. Man hole frame & cover for 914.4mm
776 28.15 Each 2646.3
dia chamber (Medium weight) as per IS: 1726 - 40 Kgs
Supply & fixing RCC cover 22 Inches dia with nominal reinforcement 3
777 28.16 Each 607.6
Inches thick and hooks for lifting
Supplying and filling brick bats in layers in soakpits including cost and
conveyance of all materials, all labour charges, all operational and
778 28.17 Cum 988.3
incidental charges, all lifts etc., complte for finished item of work as
directed.
Supply and fixing 580mm long Indian pattern white glazed W.C first
779 28.18 quality ISI marked conforming to IS 2556 - part 3- 2004 with P or S trap Each 988.3
Hind ware/ Parry Ware/ Neycer- ISI Mark
Labour charges only for fixing Indian pattern W.C with P or S trap
780 28.19 Each 418.6
Supplying, Laying and jointing of C.I. Pipes (all classes) and specials
755 28.2 (fittings) with s/s ends, including cost of pipes, rubber gasket (push-on- RM 704.7
joint), all sundries - 100 mm dia pipe
Supplying and fixing porcelain foot rest for squatting I.W.C. (Rectangular
781 28.2 pair) of size 250mmx125mmx15mm thick each foot rest first quality ISI Pair 237.5
marked conforming to IS 2556-Part 10: 1974
Labour charges only for fixing porcelain foot rest for squatting I.W.C
782 28.21 Pair 95.4
(Rectangular pair)
Supplying and fixing 580 x 440mm Orissa pan white glazed W.C first
783 28.22 quality ISI marked conforming to IS 2556 - part 3- 2004 with P or S trap Each 1454.5
Hindware/ parry ware/ Neycer.
Labour charges only for fixing Orissa pan W.C with P or S trap as per
784 28.23 Each 522.2
standard practice
Supplying and fixing European water closet of first quality conforming to
IS 2556-Part-2-2004 of Hindware/ Neycer or parryware make white
785 28.24 Each 1621
glazed with P trap. Plastic seat and lid is to be paid extra.
Labour charges only for fixing European Water Closet with P or S trap as
787 28.25.2 Each 366.8
per standard practice
Supply and fixing of PVC low level Cistern Parryware/ Slimline with
788 28.26 internal components and short bend.- 10 Ltrs capacity Single flush Each 1487.1
Supply and fixing of PVC low level Cistern Parryware/ Slimline with
789 28.27 internal components and short bend.- 10 Ltrs capacity Dual flush Each 1745.7
790 28.28 Supplying and fixing internal fittings for flush tank Each 838.1
Supply, Installation and commissioning approved make floor mounted
EWC(suit) CASCADE model P or S trap with dual flush porcelain cistern
fixed on EWC with all internal parts of dual flush cistern, ultra solid seat
cover of aproved make with rubber buffer and cap 15mm angle stop
791 28.29.1 Each 8156.3
cock 450mm long PVC inter connection pipe wall flanges all of approved
make etc. complete for finished item of work in all respects - White
colour
Supplying and fixing white glazed flat back half stall urinals first quality
conforming to IS 2556-1995 with standard C.P spreader of over all size
797 28.33.1 95x95x57mm conforming to Is-2556 part-6 sec 6/1974 fixing with screws Each 2310.4
complete Indian make (Hindware/ parry ware/ Neycer) of size
410x265x305mm
Labour charges for fixing flat back Bowl / half stall urinal with fixing C.P
798 28.33.2 Each 208.6
spreader and screws complete
Supply and fixing Indian make white glazed vitreous china porcelain sink
conforming to IS 2556-Part-5-1994 on cantilever brackets with parallel
799 28.34.1 Each 4160.5
pipe thread conforming to IS 2963-1979, of size 600x400x250mm
800 28.34.2 Labour charges for fixing china porcelain sink Each 522.2
Supply and fixing 609.6 x457.2 x254mm RCC terrazzo finished sink
801 28.35.1 including CI cantilever brackets, 38mm dia waste coupling and 38mm dia Each 756.4
PVC waste pipe of 0.75m long, etc., complete.
802 28.35.2 Labour charges for fixing RCC terrazzo finished sink Each 346.3
Supplying & fixing stainless steel sink size 20 Inches x18 Inches x 8 Inches
803 28.36.1 Each 4510.6
(508x457.2x 203.2 mm) 1mm thick with accessories
804 28.36.2 labour charges for fixing stainless steel sink with accessories Each 522.2
Supplying and fixing of polished black cuddapah slab/ stone sink of size
600mm x 450mm x 250mm and 18mm thick including supplying and
fixing on CI cantilever brackets, 38mm dia waste coupling and 38mm dia
805 28.37 PVC waste pipe of 0.75m long, etc., complete including cost and Each 935.3
conveyance of all materials to site, labour charges, all operational and
incidental charges etc., complete for finished item of work
Supplying & Fixing Indian make Flat Back Wash Hand Basin (Hindware/
Parry ware/ Neycer) 1st quality conforming to IS:2556 - Part-4:1972 with
32mm nominal size C.P. Fitting with parallel pipe thread conforming to
IS:2963-1979 and fitted with 15mm nominal bore Chromium Plated Pillar
806 28.38.1 Each 1613.2
Tap of 1st quality Indian make 400grams Seiko/Senior/ Nice/ Esso or
equivalent complete with standard CI brackets including wooden block:
550x400mm - Single C.P. Pillar Cock
Labour charges for fixing Indian make Flat back wash hand basin with
807 28.38.2 Each 522.2
waste fittings
Supplying and Fixing Pedestal for Wash Hand Basin (Hindware/parry
808 28.38.3 Each 1074.2
ware/ Earthenware)
Supplying and Fixing Pedestal for Wash Hand Basin (Hindware/parry
809 28.38.4 ware/ Earthenware) (Coloured Pedestal otherthan White ) Each 1516.6
Supplying & Fixing Indian make Flat Back Coloured Wash Hand Basin
(Hindware/ Parryware/ Neycer) 1st quality conforming to IS:2556-Part-
4:1972 with 32mm nominal size C.P. Fitting with parallel pipe thread
conforming to IS:2963-1979 and fitted with 15mm nominal bore
810 28.38.5 Each 1940.5
Chromium Plated Pillar Tap of 1st quality Indian make 400grams
Seiko/Senior/ Nice/Esso or equivalent complete with standard CI
brackets including wooden block: 550x400mm - Single C.P. Pillar cock
Supply & fixing 30 mm nominal size dia PVC flexible waste pipe of 914.4
811 28.39 Each 23.2
mm length of Ist quality
757 28.4 Supplying & fixing 88.9mm A.C cowls Each 70.6
812 28.4 Supplying & Fixing PVC bottle trap with wall connection pipe Each 150.8
Supplying and fixing 19.04mm dia and 609.6mm long aluminium
813 28.41 Each 163.5
anodized towel rod with brackets and aluminium screws
Supplying and fixing TV shape mirror with plastic frame size
814 28.42.1 Each 548.7
609.6x457.2mm
815 28.42.2 Labour charges for fixing TV shape mirror Each 187.6
Supplying and fixing 609.6mm long 127mm wide plate glass shelf
816 28.43 Each 71.7
Supplying & Fixing 15mm PVC connection with brass union nut C.P
817 28.44.1 Each 101.4
coated
818 28.44.2 Labour charges for Fixing 15mm PVC connection Each 32.4
Supplying and fixing CP finish brass body 32 mm dia nominal size waste
819 28.45 coupling with half / full thread & brass check nut conforming to IS 2963: Each 229.5
1979
Supplying and fixing 31.75mm PVC bottle trap with wall connection pipe
820 28.46 Each 150.8
Supplying and fixing CI Nahany traps 1st quality ISI marked conforming
to IS:1729-1979 with C.P. Grating fixing with white cement as per site
821 28.47 requirements with standard practice for nominal dia 75mm(3 Inches) Each 319
and grating size 100mm dia of weight not less than 4.0Kgs
Supplying and fixing 150mm x100mm SWG gully traps Conforming to IS-
651 and 4127 with C.I Grating and Constg. Brick masonry in CM 1:6 prop.
including plastering and fitted with 304.8mm x288.6mm(12 Inchesx9
822 28.48 Each 410.2
Inches) C.I Frame and hinged cover including earth work excavation
(excluding cost of Cement)
Supplying and fixing Stainless steel 4 Inches dia round Grating with
823 28.49 Each 69.7
frame for nahany or floor trap cover with or without hole
Labour charges for cutting holes in stone masonry & basement and
758 28.5 Each 99.5
repairs
824 28.5 Supplying and fixing CI gully trap grating Each 51.41
825 28.51 Labour charges fixing CI gully trap grating Each 17.8
Supplying & fixing 304.8 x 228.6mm CI frame & cover over gully taps
826 28.52.1 Each 131.1
Labour charges for fixing 304.8x228.6 mm CI frame & cover over gully
827 28.52.2 Each 56.6
taps
Supplying & fixing CI floor traps 1st quality ISI marked conforming to
IS:1729-1979 with C.P. Grating fixing with white cement as per site
828 28.53 requirements with standard practice for nominal dia 75 mm (3 Inches) Each 504.3
and grating size 165 mm dia of weight not less than 5.5 Kgs
Supplying & fixing CI floor traps 1st quality ISI marked conforming to
IS:1729-1979 with C.P. Grating fixing with white cement as per site
829 28.54 requirements with standard practice for nominal dia 100 mm (4 Inches) Each 611
and grating size 100 mm dia of weight not less than 6Kgs
Labour charges only for fixing CI Nahany/ Floor traps with C.P. Grating
830 28.55 fixing with white cement as per site requirements with standard practice Each 81.8
831 28.56 Supply and fixing 12.7mm brass bib cock Indian make 400 grams Each 267.8
832 28.57 Supply and fixing 12.7mm brass bib cock Indian make 300 grams Each 239.2
Supply and fixing 12.7mm brass stop cock Indian make heavy duty
833 28.58 Each 275.5
Supply and fixing 12.7 mm brass stop cock Indian make 300 grams
834 28.59 Each 248.5
759 28.6 Labour charges for Cutting holes in Brick masonry & repairs Each 65.4
Supply & Fixing of steel surgical long elbow action handle 12.7mm dia
835 28.6 bib cock Indian make heavy type including all materials Each 1093.5
Supply & Fixing 12.7mm N.P bib tap Indian make heavy duty Seiko/
836 28.61 Each 454.3
Senior/ Nice or equivalent
Supply & Fixing 12.7mm N.P bib tap Indian make 300 grams Seiko/
837 28.62 Each 296.5
Senior/ Nice or equivalent
S&F of 15 mm brass body CP finish long body bib tap of not less than 400
838 28.63 grams weight with quarter turn spindle internal / external threaded Each 719.5
connection conforming to IS 8931
Supply & Fixing 12.7 mm NP stop cock Indian make heavy duty Seiko/
839 28.64 Each 518.2
Senior/ Nice or equivalent
Supply & Fixing 12.7 mm CP concealed stop cock Indian make heavy duty
840 28.65 Each 580.2
Seiko/ Senior/ Nice or equivalent
Supply & Fixing NP angle stop cock 12.7 mm dia 1st quality Indian Make
841 28.66 Each 580.2
heavy duty Seiko/ Senior/ Nice or equivalent
Supply & Fixing 12.7mm dia heavy duty NP high neck / Swan Neck pillar
842 28.67 cock 1st quality Indian make Seiko/ Senior/ Nice or equivalent Each 1015
S&F 12.7 mm dia NP pillar cock heavy duty Ist quality Indian make Seiko/
843 28.68 Each 759.2
Senior/ Nice or equivalent
844 28.69 Supply & Fixing 12.7mm dia NP Push cock 1st quality Each 262.1
760 28.7 Labour charges for Cutting holes in RCC slab floor & repairs Each 99.5
845 28.7 Supplying and fixing 12.7mm dia NP Lift cock 1st quality Each 232.2
Supplying and fixing leather washers for 12.7mm bib tap and stop cock
846 28.71 Each 0.9
847 28.72 Supplying & Fixing 15 mm nominal sizefibre washers Each 2.7
848 28.73 Supply of PVC Bib cock Each 67.3
Supplying & Fixing 20mm nominal size copper body float valve with PVC
849 28.74 Each 352.6
ball Indian make ISImark
Supplying & Fixing 25 mm nominal size copper body float valve with PVC
850 28.75 Each 420.5
ball Indian make ISI mark
Supplying, laying, fixing and commissioning the SWR pipes of
Prince/Sudhakar/ Kisan/ Supreme or any ISI Brand SWR Pipe (as per ISI-
standards) Type-A pipes (PVC / SWR pipe - 4Kg/sq.cm) for rain water and
vent pipes including couplers/ bends/ tees etc of any diameter including
851 28.76.1 Each 544.4
fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc
with solvent jointing as per standard practice excluding cost of fittings. -
75mm dia 3M Double socket pipe
911 28.88 Supplying & fixing G.I pipe plug of size 15mm dia Each 10.1
912 28.89.1 Supplying & fixing 20mm dia G.I plug Each 14
913 28.89.2 labour charges for fixing G.I pipe plug of size 15mm / 20mm dia Each 1.6
Conveyance of RCC socket and spigot pipes on all weather roading
including loading Unloading and stacking (per metre of effective length)
766 28.9.1 (for NP2 pipes). (Rate for every additional 1 Km. lead or part there of KMRM 0.3
beyond 5KM initial lead is only payable) - 150 mm Dia pipes
914 28.90.1 Supplying & fixing 50mm dia of G.I PLUG Each 111
915 28.90.2 Labour charges for fixing 50mm dia of G.I PLUG Each 17.8
916 28.91 Supplying and fixing G.I union 15mm Ist Quality Each 39.8
917 28.92 Supplying and fixing G.I union 20mm Ist Quality Each 47.6
918 28.93 Supplying and fixing G.I union 25mm Ist Quality Each 72.8
919 28.94 Supplying and fixing G.I union 50mm Ist Quality Each 133
Supplying and fixing Bronze Gate/ Globe valve as per IS - 778 Class - I,
920 28.95 Each 586.1
Indian make heavy type - 15mm NB Size
Supplying and fixing Bronze Gate/ Globe valve as per IS - 778 Class - I,
921 28.96 Each 781.9
Indian make heavy type - 20mm NB Size
Supplying and fixing Gunmetal Gate valve as per IS - 778 Class - I, Indian
922 28.97 Each 1112.6
make heavy type - 25mm NB Size
Supplying and fixing Gunmetal Gate valve as per IS-778 Class- I, Indian
923 28.98 Each 3324.5
make heavy type - 50mm NB Size
Supplying and fixing 20mm G.I drain pipe with plug for tanks (Mud valve)
924 28.99 Each 69.6
including making a hole
29.MISCELLANEOUS
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Labour charges for maintenance of tennis court of standard size 27 X14m
including cleaning, sweeping, hand rolling, sprinkling of cow dung each
968 29.1 1474.7
solution, making lines with lime powder, all operational charges etc. operation
complete as directed.
Providing Antitermite treatment (Pre-constructional chemical treatment
measures) along the internal & external vertical faces of the columns,
Plinth Beams / Brace beams, basement and top surface of the basement
filling below flooring bed as per the specified procedure conforming to IS
6313 (Part-2) 2001 and other relevant approved specification duly using
Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1%
concentration @ 7.5 litres/ sqm of the vertical surface & @ 5.0 litres/
969 29.2 sqm of the horizontal surface of the substructure to a depth of 500 mm Sqm 285.5
around columns & 300 mm deep around Plinth Beams / Brace beams,
basements & floor filling area including excavation channel along the
wall & rodding etc & cost & conveyance of all materials to the site, cost
of labour for spraying, rodding etc complete for finished item of work as
per the approval of the Engineer-in-Charge
Manufacture and supply of clay pills of size 35mm dia and 150mm long
with 80% of red earth and 20% of sand including cost and conveyance of
all materials, all Labour charges, all operational and incidental charges
etc., complete for finished item of work including stacking at site of
970 29.3 1000Nos 346.6
work/ departmental stores shed etc.as directed. The clay Pills making
machine, electricity and water will be provided by the company at free of
cost Note:- Lead for earth is to be paid separately.
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Demolition of Brick / Stone masonry in Cement Mortar including stacking
973 30.1 of serviceable materials and disposal of unserviceable materials within Cum 408.4
100mts lead.
Washing and cleaning of wall surfaces with soap, soda and water
982 30.1 Sqm 9.3
Dismantling doors, windows, ventilators etc.; (wood or steel) shutters
983 30.11 including frames complete and stacking them within 100 metre lead. Each 178.3
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Maintenance of track to Railway standards including correcting
alignment defects, keeping rails in required level, maintaining gauge
with in permissible limits, through packing of sleepers once in 6 months,
straightening of the tie bars, pulling back creep, squaring of sleepers and
providing contractors creep anchors, lubricating rail joints, greasing
switches, Daily foot inspection by contractors key man of competent
person, Providing clear visibility, Protection of track for safety, cleaning
of drains periodically, replacement of isolated broken rails, sleepers,
fittings etc., making up the embankment at times of rain cuts and KM/
989 31.1 37971.6
erosions, protection of track boundaries, track and track fittings and co- Month
coordinating with South Central Railway for getting track fitness
certificate by the Contractor as per scope of work as indicated in
invitation of tender. Note:- 1. The approximate length of siding to be
maintained as equated KMs length of Railway track. 2. Equated KMs
means length of track + allowances given for points and crossings etc. as
per Railways standards. 3. The contractor should indicate the Number
and category of maintenance force that would be deployed by him daily/
weekly/ monthly. The minimum strength of maintenance force for every
998 31.1 Supply of steel keys for CST-9 sleepers (52KG /90R rails) Each 12.4
999 31.11 Supply of class – I fish Bolts and nuts suitable for 52 Kg rails. Each 43.1
1000 31.12.1 Supply of Class-I fish plates for 52 Kg rails -950mm long. Each 1500.2
1001 31.12.2 Supply of Class-I fish plates for 52 Kg rails - one metre long. Each 1675.5
1002 31.12.3 Supply of Class-I fish plates for 52 Kg rails - 610mm long. Each 1022.1
1003 31.12.4 Supply of Class-I fish plates for 60 Kg rails - 610mm long. Each 1261.8
Supply of Class-I spring steel loose jaws suitable for 52KG/90R on
1004 31.13 Each 9.2
standard ST Sleepers.
1005 31.14 Supply of dog spikes for guard rails for BG track. Each 4.9
1006 31.15.1 Supply of class–I Rail screws- 52KG Each 18
1007 31.15.2 Supply of class –I Rail screws - 60KG Each 21.2
1008 31.16 Supply of elastic rail clips MK-III for BG PSC sleepers Each 50.9
Supply of class-I rubber pads for ST sleepers(with elastic fastenings)
1009 31.17 Each 28.9
1010 31.18.1 Supply of class-I GFN Liners for 52 Kg rails. Each 10.4
1011 31.18.2 Supply of class-I GFN Liners for 60 Kg rails. Each 9.9
Supply of ST sleepers (for BG track) with conventional fastenings (loose
1012 31.19 Each 1228.8
jaws 4Nos & steel keys 4Nos)
Labour charges for dismantling and Replacement of points and crossings
including sleepers with all fittings and ballast including tight packing etc.,
990 31.2 complete as directed by the Engineer-in charge including handing over Each 9284.5
the damaged points and crossings and sleepers at Departmental stores.
Removal of Spillage coal from the Railway Track including excavation and
depositing the same in designated locations with in the yard with all lifts
994 31.6 Cum 149.3
and leads as directed by the Engineer-in-charge
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Supply and fixing of 19mm dia, heavy gauge ISI marked PVC conduit pipe
recessed / concealed into wall/slab along with reinforcement laid into
wall/slab with all required accessories wherever necessary including
1030 32.1 RM 75.3
masonry work for light fan point/ exhaust fan point/ call bell point and
separate plug socket point, TV/Telephone wiring etc. complete.
Supply and fixing of ISI marked Flush Type 6A 5 pin plug socket with
Flush Type 6A switch control on a common board with earth continuity
1039 32.1 including Anodised MS Box and suitable both sides laminated White Each 153.9
Front plate including wire leads earth connections complete.
Supply and fixing MODULAR type 16A one module ISI marked 5 pin
socket with MODULAR type 16A SP switch and GI box covered with
1040 32.11 Each 678.2
suitable white cover plate and concealed in wall complete.
Supply and Wiring with 3 Runs of 1.0Sq.mm 1100 V grade PVC insulated
flexible copper conductor cable (phase, neutral & earth) in the existing
P.V.C conduit pipe with MODULAR Type 6A ISI marked MODULAR Type
bell push with GI Box with appropriate white cover plate including supply
1042 32.13 Point 705.9
and suitable mounted DING DONG Bell of approved make and type,
mounting for Bell etc., complete with all accessories as needed. (MDS
Type)
Supply and laying of 3 runs of 2.5 sq.mm 1100 v grade PVC insulated
flexible copper cable ( Phase, Neutral &Earth) in existing metallic/ Non -
1046 32.17 RM 104.8
Metallic conduit pipe for run of circuit/ Power mains including copper
lugs complete
Supply and fixing of 4 Way TPN Double Door distribution board with
integral bus bar and din rail concealed in wall with flexibility to accept
any combination of MCBs with 1 no 32A, 4 pole, 100mA RCBO, 5 nos. of
1047 32.18 6 Amps SP MCBs and 4 nos of 10A DP Contactor and 4 nos each 7954.2
programmable time switches all mounted on din rail channel, including
all inter connections complete (common area lighting).
Supply and fixing of 4 Way TPN Double Door distribution board with
integral bus bar and din rail concealed in wall with flexibility to accept
any combination of MCBs with 1 no 40A, 4 pole, 100mA RCBO, as
1048 32.19 incomer and 9nos. of 6 Amps SP MCBs and 2 nos of 16A SP MCB and 1 each 7972
no 20 A SP MCBs in sheet metal enclosure including all connections
chiselling masonry work etc., (quarter in side as main DB)
Supply and fixing of 25mm dia, heavy gauge recessed / concealed ISI
marked PVC conduit pipe along with reinforcement laid into wall/slab
1031 32.2 with all required accessories wherever necessary including masonry RM 83.2
work for circuit main/ sub-mains/ 15 A power circuit/ Telephone/TV
points complete.
Supply and fixing of 4 Way TPN Double Door distribution board
Concealed in wall with Din Rail suitable for single combination of single
pole outgoing MCBs in sheet steel enclosure on wall with 1no 40A, 4
1049 32.2 each 7972
pole, 100mA RCBO and 8 Nos of 6-32A Single pole MCBs 3 nos of 16A SP
MCBs and 1 No. 20A SP MCBs including all connections accessories etc.,
complete.
Supply and fixing of 8Way SPN distribution board concealed in wall with
din rail suitable for any combination of single pole outgoing MCB s in
1050 32.21 sheet steel enclosure on wall with 1 no 32A,4 pole 100mA ELCB and 8 each 4217.2
NOs of 6-32 Amps Single pole MCBs including connections, all masonry
work complete
Supply and fixing of 440 v, 10-40 Amps three phase Electronic
Programmable Energy Meters mounted on double door metal
1051 32.22 each 4963.1
distribution board concealed in wall and front plate flush with the wall
Supply and Wiring with three runs of 1.0 sq.mm (14/0.3mm) 1100 V
grade P.V.C insulated flexible copper conductor cable (phase, neutral &
earth) in the existing P.V.C conduit pipe with 6A flush type ISI marked
flush type switch/bell push with anodised MS box and white both sides
1033 32.4 Point 631.1
laminated front cover plate concealed in wall and ceiling Rose/ Slant or
Angle holder, round block etc and other accessories as necessary
complete for light, bell, exhaust fan points.
Supply and Wiring with three runs of 1.0 sq.mm (14/0.3mm) 1100 V
grade P.V.C insulated flexible copper conductor cable (phase, neutral &
earth) in the existing P.V.C conduit pipe with 6A flush type ISI marked
1034 32.5 MODULAR type switch/bell push with GI box and white front plate Point 640.1
concealed in wall and ceiling Rose/Slant accessories as necessary
complete for light, bell, exhaust fan points (MDS Type).
Supply and Wiring with three runs of 1.0 sq.mm (14/0.3mm) 1100 V
grade PVC insulated flexible copper conductor cable (phase, neutral &
earth) in the existing P.V.C conduit pipe with 6A flush type ISI marked
1035 32.6 MODULAR type Control switch, MODULAR 120W step Type electronic Point 665.6
hum free fan regulator, GI Box and white Front plate concealed in wall
complete for fan point (MDS Type).
Supply and Wiring with 3 runs of 1.0 sq.mm 1100 V grade PVC insulated
flexible copper conductor cable (phase, neutral & earth) in the existing
P.V.C conduit pipe with MODULAR type 6A ISI marked 5 pin MODULAR
1036 32.7 Type socket with MODULAR Type 6A switch control and with GI Box and Point 711.1
White Front plate concealed in wall complete with all accessories (fixing
on separate board) (MDS Type).
Supply and Wiring with 3 runs of 1.0 sq.mm 1100 V grade PVC insulated
flexible copper conductor cable (phase, neutral & earth) in the existing
P.V.C conduit pipe with 6A flush type ISI marked 5 pin socket with 6A
1037 32.8 switch control and with Anodised MS Box and White Both sides Point 636.4
laminated Front cover plate concealed in wall complete with all
accessories (fixing on separate board) (MDS Type).
Supply and fixing of ISI marked MODULAR Type 6A 5 pin MODULAR Type
wall plug socket with MODULAR Type 6A switch control on a common
1038 32.9 board with earth continuity including GI Box and White Front plate Each 245.4
including wire leads earth connections complete.
33.BORE WELLS
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Drilling of 114 mm dia. Bore wells by Down The Hole (DTH) hammer
drilling in hard rock formations to a depth as desired by the department
and reaming the bore to suit insertion of 140mm dia PVC casing pipe of 6
Kg/CM2 including insertion of casing pipe, supply and filling of required
quantity of 6mm pea gravel as directed by the department including cost
of bore development (flushing the bore well at an average pressure of
100 PSI) conducting yield test, crew charges, cost of consumables
1053 33.1.1 RM 309.3
including construction of C.C. platform with Contractors cement and
other materials and all other charges required complete but excluding
cost of PVC casing pipe & inclusive of fixing of Hand pump. The entire
work has to be done to the satisfaction of departmental authorities and
as per IS 2800 PART I & II – 1979.
Drilling of 165 mm dia. Bore wells by Down The Hole (DTH) hammer
drilling in all formations to a depth as desired by the department and
reaming the bore to suit insertion of 180mm dia PVC casing pipe of 6
Kg/CM2 including insertion of casing pipe, supply and filling of required
quantity of 6mm pea gravel as directed by the department including cost
of bore development (flushing the bore well at an average pressure of
100 PSI) conducting yield test, crew charges, cost of consumables
1054 33.1.2 RM 449.3
including construction of C.C. platform with Contractors cement and
other materials and all other charges required complete but excluding
cost of PVC casing pipe & inclusive of fixing of Hand pump. The entire
work has to be done to the satisfaction of departmental authorities and
as per IS 2800 PART I & II – 1979.
Supply of Cylinder body with brass lining ( for IM-II).Lining shall conform
to grade Cu Zn 30 as of IS 404/1981. It shall be temper annealed).
1072 33.10.1 Each 564.3
(Deepwell Hand Pumps cast iron components as per IS : 14101/1994)
Manufacture, supply and Delivery of ISI marked fully hot dip galvanized
deep well India Mark-II Hand Pump assembly complete unit with 10 Nos.
of connecting rods (bright bars) of 12 mm dia 3 mtrs. The component
1060 33.4 Each 6863.4
identification and manufacturer mark shall be as per BIS specification
with telescopic stand.
Add extra for supply of Connecting rod 12 mm, 3 mts. Long (Electro
1061 33.5 galvanized bright bar) along with M12 x 50 long and M 12x20 long Hex Each 172.6
coupler at either end welded.
Construction of plat form with CC 1:3:6 using 40mm down size (50% of
40-20mm, 30% of 20-10mm and 20% of 10-4.75mm) graded Crushed
Granite metal of approved hard quality, of 2.00 m dia and 150 mm thick
alround the bore well with 100 mm x 100 mm concrete curbing wall
1062 33.6 Each 1846.6
alround, and plastering the surfaces with CM 1:4, 12 mm thick including
earth work excavation of 150 mm depth etc., complete as directed (
Excluding Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum)
Flushing of 140mm dia bore wells at an average pressure of 100 PSI with
D.T.H Rig in all formation including conducting yield test, crew charges,
1063 33.7.1 Each 5250
cost of consumables and other charges required for flushing.
Flushing of 180mm dia bore wells at an average pressure of 100 PSI with
D.T.H Rig in all formation including conducting yield test, crew charges,
1064 33.7.2 Each 6000
cost of consumables and other charges required for flushing.
Removing of hand pump set including GI pipes along with fixtures and re-
installation of the same after fixing required spares and attending
1065 33.8 Each 1097.5
required repairs etc. complete (Excluding cost of spares)
Supply of Head Assembly with third plate including cover and cover bolt.
1066 33.9.1 Each 1316.6
(Mild Steel Components as per IS 14103 / 1994)
Supply of 12mm Hex Bolt as per IS 1363. (Mild Steel Components as per
1067 33.9.2 KG 84.6
IS 14103 / 1994)
Supply of Washer (4 mm thick ) for M12 Bolts. (Mild Steel Components
1068 33.9.3 KG 75.3
as per IS 14103 / 1994)
Supply of Handle assembly (without axle). (Mild Steel Components as
1069 33.9.4 Each 846.5
per IS 14103 / 1994)
Supply of Chain with coupling. (Mild Steel Components as per IS 14103 /
1070 33.9.5 Each 89.3
1994)
Supply of Water tank assembly. (Mild Steel Components as per IS 14103
1071 33.9.6 Each 893.4
/ 1994)
34.LEAD CHART
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Conveyance charges of Earth - Lead Upto 1 KM. Note:- 1). Loading
1079 34.1.1 charges to be applied for manual loading only. 2). Unloading/ stacking cum 31.5
charges need not be paid for this material.
Conveyance charges of Earth - Lead Upto 2 KM. Note:- 1). Loading
1080 34.1.2 charges to be applied for manual loading only. 2). Unloading/ stacking cum 44.1
charges need not be paid for this material.
Conveyance charges of Earth - Lead Upto 3 KM. Note:- 1). Loading
1081 34.1.3 charges to be applied for manual loading only. 2). Unloading/ stacking cum 58.8
charges need not be paid for this material.
Conveyance charges of Earth - Lead Upto 4 KM. Note:- 1). Loading
1082 34.1.4 charges to be applied for manual loading only. 2). Unloading/ stacking cum 71.4
charges need not be paid for this material.
Conveyance charges of Earth - Lead Upto 5 KM. Note:- 1). Loading
1083 34.1.5 charges to be applied for manual loading only. 2). Unloading/ stacking cum 84
charges need not be paid for this material.
Conveyance charges of Earth - For Beyond 5 KM and up to 30 KM
(Rate/KM) Note:- 1). Loading charges to be applied for manual loading
1084 34.1.6 cum 12.6
only. 2). Unloading/ stacking charges need not be paid for this material.
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Chipping the existing damaged concrete surface for RCC beams, side
walls, columns and slabs etc., by mechanical/manual methods including
1244 36.1 removal of the loose concrete and disposal of the debris to the specified Sqm 350
dumping area as directed for special repairs.
Excavation in all kinds of soil including boulders upto 0.30 m dia. for
foundations of canal cross drainage and other appurtenant structures
and placing the excavated stuff neatly in specified dump area or
1320 36.11 Cum 302
disposing off the same as directed etc., complete with initial lead upto
50 m and initial lift upto 3 m.
Providing and laying insitu M- 20(28 days cube compressive strength not
less than 20N/ sqmm ) grade cement concrete using 20mm down size
approved, clean, hard, graded aggregates for wearing coat including cost
of all materials, machinery, labour, formwork, cleaning, batching, mixing,
placing in position in alternate panels, levelling, compacting, finishing,
curing, packing joints with asphalt mortar etc., complete with initial lead
1325 36.16 upto 50 m and all lifts. (Cement content : 300 kg /cum) (But Excluding Cum 3026.9
cost of Cement) Note :- If water is to be brought from other place add
only lead charges @ 500ltr / cum. to the data (Cement content: 330 kg /
cum with use of super plasticiser (0.4% by wt. of cement), CA : 0.80cum,
Blending Ratio of CA--65:35, FA : 0.45 cum)
Providing and constructing 30 cm thick dry rubble stone pitching with pin
headers at 2 per sqm including cost of all materials, labour, hand
1326 36.17 packing, finishing etc., complete with initial lead upto 50 m and all lifts. Sqm 220
(rubble stones : 0.275 cum/sqm, Stone Chips : 0.045cum/sqm, Pin
Headers 30cm : 2/sqm)
Providing anti corrosive coating to the exposed reinforcement bars using
High range of reinforcement / steel protector against corrosion zinc rich
1243 36.2 epoxy resin primer of SIKA/ BASF/ FOSROC complete as directed for RCC Sqm 375.7
beams, side walls, columns and slabs etc., for special repairs.
Drilling of the holes at a spacing of 300mm c/c zig zag in alternative rows
to a depth of 75 to 100mm, fixing shear connectors using 8mm dia
reinforcement rebars in the drilled holes using polyester resin grout of
1242 36.3 SIKA/ BASF/ FOSROC complete for RCC Column Footings, columns, Sqm 541.6
beams and slabs etc., complete as directed for special repairs. Note:
Reinforcement steel will be measured and paid separately.
Providing Micro concrete of SIKA/ BASF/ FOSROC added with 6mm down
grade aggregate at a maximum ratio of 1:0.75) with minimum 150mm
thick on 4 sides of columns, and for beams 75mm thickness on the sides
1240 36.4 and 100mm thickness at the bottom including cleaning the surfaces Cum 60813.6
thoroughly in appropriate method, required centering, shuttering and
curing etc., complete for special repairs.
SR ITEM
ID DESCRIPTION UNIT RATE
NO
Providing and constructing chimney filter using clean approved sand
satisfying filter creteria including cost of all materials, machinery, labour,
1204 40.1 Cum 149.4
compacting etc., complete with all leads and lifts. (But Excluding Cost of
Sand )
Providing hearting embankment using selected impervious soil from
approved borrow areas in layers of 25 to 30 cm before compaction
including cost of all materials, machinery, labour, all operations such as
excavation, sorting out, transportation, spreading soil in layer of
1196 40.1 specified thickness, breaking clods, sectioning, watering, compacting to Cum 142.9
density control of not less than 95 percent or as stipulated using Sheep
foot roller / Vibratory roller/ 8 to 10 tonne power roller etc., complete
with initial lead upto 1 km and all lifts.
Providing and laying launching apron for bed protection with approved
stone boulders of other than granite variety with minimum weight not
less than 45 Kgs laid dry, packing with stone spalls including cost and
conveyance of all materials, all leads and lifts, labour charges, all
1206 40.12 cum 647.4
operational and incidental charges etc., complete as per drawing and
technical specifications as per IS 10751-1994 and as directed by the
Engineer-in-charge.
Cement Concrete 1:3:6 with 40mm down size (50% of 40-20mm, 30% of
20-10mm and 20% of 10-4.75mm) graded Crushed Granite metal of
approved hard quality including machine mixing, vibrating necessary
1200 40.5 Centering, shuttering etc., Complete for finished Item of work as Cum 2450.5
directed for Filter Bed Side Walls and Retaining walls (But Excluding Cost
of Cement and Sand ) (CA : 0.90 Cum, FA:0.45Cum)
Coursed rubble stone masonry with approved hard quality stone of other
than granite variety stone in CM 1:6 in foundations/Basement /
1198 40.7 Cum 2449.9
Substructure up to 600mm thick second sort (But Excluding Cost of
Cement and Sand)
Flush pointing to stone masonry / stone pitching with Cement mortar 1:4
1197 40.8 including raking out of joints ( But Excluding Cost of Cement and Sand) Sqm 63.6