Professional Documents
Culture Documents
1st Quarter Exam Dressmaking
1st Quarter Exam Dressmaking
T.L.E. 9 – DRESSMAKING
1st Quarter Assessment S.Y. 2022-2023
ABCD
O O O O 1. The principle of design which can be achieved by creating a center of interest in
the garment.
a. Balance c. Emphasis
b. Rhythm d. Proportion
O O O O 2. What kind of balance is achieved when all parts of the design are at equal
distance from a central point?
a. symmetrical balance c. rhythmic balance
b. radial balance d. asymmetrical balance
O O O O 3. What kind of line is vertical, horizontal, diagonal, checkered, broken and curved
line?
a. proportional lines c. conventional lines
b. decorative lines d. directional lines
O O O O 5. What do you call the colors that are sometimes called an “earth tones”?
a. Secondary colors c. Neutral colors
b. Complimentary colors d. Primary colors
O O O O 6. Myrna wants to make a gown for her 18th birthday. She has now the fabric to cut.
What will she do first to have a guide in cutting her fabric?
a. layout the materials c. mark the fabric
b. pin the fabric d. layout a pattern
O O O O 10. What do you call a pattern provided with the necessary symbols and
allowances?
a. Muslin b. Block c. Final d. Construction
O O O O 13. Aida’s teacher told her to lay out her casual dress pattern on the cloth. What
should she do first?
a. Choose the longest table to be used.
b. Pin pattern piece in all the way around the edge.
c. Mark stitching line before cutting.
d. Check well the pattern before laying them on the cloth.
O O O O 15. What sewing tool is used to cut pattern with tight curves?
a. rotary cutter c. paper scissor
b. sharp shear d. trimming sccissor
O O O O 18. Lady Mae has a bust measurement of 34 inches. She will use this in making a
pattern for her
casual dress. How much of this measurement should be used?
a. 8.2 inches b. 34 inches c. 8.5 inches d. 17
inches
O O O O 19. Dolly is transferring the markings of her pattern to the fabric. She wants to have
a fine lines marking to appear on her cloth. What is the suitable marking tool to be used?
a.tailor’s chalk c. wax chalk
b. dressmaker’s pencil d. liquid marking pen
O O O O 20. What is the BEST practice to be observed during the cutting process?
a. Let the material hang on the sides of the cutting table.
b. Keep the material.
c. Stop and rechecked.
d. Walk around the table.
GOOD LUCK !!!