Professional Documents
Culture Documents
Cummins Isb6.7 06 13 2019
Cummins Isb6.7 06 13 2019
The information contained within PROSIS PRO is provided by the best available sources. AERA does not assume
responsibility for data accuracy or consequences of its application. Members and others are not authorized to reproduce
or distribute this material or issue it to branches, divisions or subsidiaries at a different location. ©Copyright AERA 2014
MAKE CUMMINS MODEL ISB6.7 YEAR 2005-2017 VIN LITER 6.7 CID 409 CYL L 6
BORE/STROKE 4.2122-4.2130" (106.990-107.010 MM) 4.882" (124.000 MM)
COMPRESSION RATIO FIRING ORDER 1-5-3-6-2-4
COMMENT B SERIES INTFR Yes
Cylinder Head
Casting
Head Information Specifications
Installed Stem Height 1.720" (43.688 MM) REPORTED 1.720" (43.688 MM) REPORTED
Total Length
Head Diameter
Guide Height .3800" (9.652 MM) REPORTED .3800" (9.652 MM) REPORTED
Guide Clearance .2767-.2786" (7.027-7.077 MM) Guide .2767-.2786" (7.027-7.077 MM) Guide ID
ID
Guide OD
Valve seal Type TOPHAT COLORED YELLOW TOPHAT COLORED YELLOW OR GREEN
06-13-2019 11:48 AM
Seat Angle 30º 45º
Seat Insert Bore Diameter 1.3719-1.3726" (34.847-34.863 MM) 1.3719-1.3726" (34.847-34.863 MM)
Valve Spring
Outer or Single Spring Intake Exhaust
Free Length
Installed Height
CloseTest Pressure
Roker shaft
Description Specification
Oil Clearance
Installation
Description Intake
Lash Adjustment Method ADJUSTING NUT/ CROSS HEADS USE NEW OR MARK FOR LOCATION
Cylinder Head Torque 66, LOOSEN AND RETORQUE TO 66 FT/LBS, +90º W ITH EQUAL LENGTH HEAD
CAPSCREWS
Camshaft Cap Torque
06-13-2019 11:48 AM
AERA
875 Feinberg Ct Ste 106
Cary, ILLINOIS 60013
Ph.8155267600
karen@aera.org
Thank you for your support of AERA
The information contained within PROSIS PRO is provided by the best available sources. AERA does not assume
responsibility for data accuracy or consequences of its application. Members and others are not authorized to reproduce
or distribute this material or issue it to branches, divisions or subsidiaries at a different location. ©Copyright AERA 2014
MAKE CUMMINS MODEL ISB6.7 YEAR 2005-2017 VIN LITER 6.7 CID 409 CYL L 6
BORE/STROKE 4.2122-4.2130" (106.990-107.010 MM) 4.882" (124.000 MM)
COMPRESSION RATIO FIRING ORDER 1-5-3-6-2-4
COMMENT B SERIES INTFR Yes
Cylinder Block
Cylinder Block
Description Specifications
Comments
Piston
Description Specifications
Compression Height
Skirt Oil Clearance .0039-.0052" FROM BOTTOM OF SKIRT .8400" (21.336 MM), 4.2078-4.2083"
PISTON DIAMETER
Piston to Rod Assembly Orientation SEE TB2591
Piston Ring Gap TOP .012-.018", 2ND .032-.047" FOR Phosphate-Coated, .021-.034" FOR
CHROME FACED, OIL .010-.023"
Housing Bore
Description Specifications
06-13-2019 11:48 AM
Main Cap Torque NEW CAPSCRWS: 89#,LOOSEN,44#,63#,+120º, USED: 44#,59#,+90º
Sleeve Protrusion
Sleeve Fit
Depth
Inside Diamater
Fit
Outside Diamater
06-13-2019 11:48 AM
AERA
875 Feinberg Ct Ste 106
Cary, ILLINOIS 60013
Ph.8155267600
karen@aera.org
Thank you for your support of AERA
The information contained within PROSIS PRO is provided by the best available sources. AERA does not assume
responsibility for data accuracy or consequences of its application. Members and others are not authorized to reproduce
or distribute this material or issue it to branches, divisions or subsidiaries at a different location. ©Copyright AERA 2014
MAKE CUMMINS MODEL ISB6.7 YEAR 2005-2017 VIN LITER 6.7 CID 409 CYL L 6
BORE/STROKE 4.2122-4.2130" (106.990-107.010 MM) 4.882" (124.000 MM)
COMPRESSION RATIO FIRING ORDER 1-5-3-6-2-4
COMMENT B SERIES INTFR Yes
Crankshaft
Crankshaft
Description Specifications
Journal Width
Main Journal
Description Specifications
Pos. 2 - -
Pos. 3 - -
Pos. 4 - -
Pos. 5 - -
Pos. 6 - -
Thrust Width @ #6
Pulley Diameter
Hardness
06-13-2019 11:48 AM
Journal Finish
Balance INTERNAL
06-13-2019 11:48 AM
AERA
875 Feinberg Ct Ste 106
Cary, ILLINOIS 60013
Ph.8155267600
karen@aera.org
Thank you for your support of AERA
The information contained within PROSIS PRO is provided by the best available sources. AERA does not assume
responsibility for data accuracy or consequences of its application. Members and others are not authorized to reproduce
or distribute this material or issue it to branches, divisions or subsidiaries at a different location. ©Copyright AERA 2014
MAKE CUMMINS MODEL ISB6.7 YEAR 2005-2017 VIN LITER 6.7 CID 409 CYL L 6
BORE/STROKE 4.2122-4.2130" (106.990-107.010 MM) 4.882" (124.000 MM)
COMPRESSION RATIO FIRING ORDER 1-5-3-6-2-4
COMMENT B SERIES INTFR Yes
Connecting Rod
Connecting Rod
Description Specifications
Bolt Diameter
Twist/Bend
Comment
06-13-2019 11:48 AM
AERA
875 Feinberg Ct Ste 106
Cary, ILLINOIS 60013
Ph.8155267600
karen@aera.org
Thank you for your support of AERA
The information contained within PROSIS PRO is provided by the best available sources. AERA does not assume
responsibility for data accuracy or consequences of its application. Members and others are not authorized to reproduce
or distribute this material or issue it to branches, divisions or subsidiaries at a different location. ©Copyright AERA 2014
MAKE CUMMINS MODEL ISB6.7 YEAR 2005-2017 VIN LITER 6.7 CID 409 CYL L 6
BORE/STROKE 4.2122-4.2130" (106.990-107.010 MM) 4.882" (124.000 MM)
COMPRESSION RATIO FIRING ORDER 1-5-3-6-2-4
COMMENT B SERIES INTFR Yes
Camshaft
Camshaft
Description Specifications
Lifter Type
Lobe Configuration
Lobe Configuration Information Intake Exhaust
Lobe lift
Duration at 0.050"
Center Line
Description Intake/Exhaust
Lobe Separation
06-13-2019 11:48 AM
Base Circle New
AERA
875 Feinberg Ct Ste 106
Cary, ILLINOIS 60013
Ph.8155267600
karen@aera.org
Thank you for your support of AERA
The information contained within PROSIS PRO is provided by the best available sources. AERA does not assume
responsibility for data accuracy or consequences of its application. Members and others are not authorized to reproduce
or distribute this material or issue it to branches, divisions or subsidiaries at a different location. ©Copyright AERA 2014
MAKE CUMMINS MODEL ISB6.7 YEAR 2005-2017 VIN LITER 6.7 CID 409 CYL L 6
BORE/STROKE 4.2122-4.2130" (106.990-107.010 MM) 4.882" (124.000 MM)
COMPRESSION RATIO FIRING ORDER 1-5-3-6-2-4
COMMENT B SERIES INTFR Yes
Torque/Tune-Up
Torque Specifications
Description Specifications
Intake Manifold
Exhaust Manifold
Flywheel 22 FT/LBS, +60°, HOUSING M10=36#, M12=63#
Flywheel Surfacing
Cylinder Head 66, LOOSEN AND RETORQUE TO 66 FT/LBS, +90º W ITH EQUAL LENGTH HEAD
CAPSCREWS
Camshaft Cap Torque
Comments
OIL PAN DRAIN PLUG STEEL M18=44# M22=59#, CAST M22=44#, MARINE 37#
CRANK WEAR SLEEVE-REAR 15# (DO NOT EXCEED 1/2 REV),RKR PEDISTAL MOUNT 27#
06-13-2019 11:48 AM
Tune-Up Specifications
Description Specifications
Compression Ratio
Ignition Timing
Comments
06-13-2019 11:48 AM
AERA
875 Feinberg Ct Ste 106
Cary, ILLINOIS 60013
Ph.8155267600
karen@aera.org
Thank you for your support of AERA
The information contained within PROSIS PRO is provided by the best available sources. AERA does not assume
responsibility for data accuracy or consequences of its application. Members and others are not authorized to reproduce
or distribute this material or issue it to branches, divisions or subsidiaries at a different location. ©Copyright AERA 2014
MAKE CUMMINS MODEL ISB6.7 YEAR 2005-2017 VIN LITER 6.7 CID 409 CYL L 6
BORE/STROKE 4.2122-4.2130" (106.990-107.010 MM) 4.882" (124.000 MM)
COMPRESSION RATIO FIRING ORDER 1-5-3-6-2-4
COMMENT B SERIES INTFR Yes
Notes
Notes
HEAD NOTE! From Cummins If valve depth and injector protrusion specifications can be maintained, the cylinder head can
be Resurfaced. If the specifications can not be maintained, the cylinder head must be replaced. NOTE: Make note of the
crosshead location and orientation. If the crossheads are reused, they must be installed in their original location and
orientation. Cylinder Block: skirted design with ribs for strength and noise reduction. Cylinders may be bored out to .5mm
max. Siamese bores. CAUTION For 4.5L and 6.7L engines, there is a different torque procedure for new and previously
installed main bearing capscrews. Failure to use the correct torque value can result in engine damage. 4.5L and 6.7L
Engines: Previously Installed Main Bearing Capscrews Step 2 60 n.m [44 ft-lb] Step 3 80 n.m [59 ft-lb] Step 4 Rotate 90
degrees. New Main Bearing Capscrews Step 6 120 n.m [89 ft-lb] Step 7 Loosen completely. Step 8 60 n.m [44 ft-lb] Step 9
85 n.m [63 ft-lb] Step 10 Rotate 120 degrees.
06-13-2019 11:48 AM
AERA
875 Feinberg Ct Ste 106
Cary, ILLINOIS 60013
Ph.8155267600
karen@aera.org
Thank you for your support of AERA
The information contained within PROSIS PRO is provided by the best available sources. AERA does not assume
responsibility for data accuracy or consequences of its application. Members and others are not authorized to reproduce
or distribute this material or issue it to branches, divisions or subsidiaries at a different location. ©Copyright AERA 2014
MAKE CUMMINS MODEL ISB6.7 YEAR 2005-2017 VIN LITER 6.7 CID 409 CYL L 6
BORE/STROKE 4.2122-4.2130" (106.990-107.010 MM) 4.882" (124.000 MM)
COMPRESSION RATIO FIRING ORDER 1-5-3-6-2-4
COMMENT B SERIES INTFR Yes
Casting Number
Casting Number Type Comment
4935689 Crankshaft
06-13-2019 11:48 AM
AERA
875 Feinberg Ct Ste 106
Cary, ILLINOIS 60013
Ph.8155267600
karen@aera.org
Thank you for your support of AERA
The information contained within PROSIS PRO is provided by the best available sources. AERA does not assume
responsibility for data accuracy or consequences of its application. Members and others are not authorized to reproduce
or distribute this material or issue it to branches, divisions or subsidiaries at a different location. ©Copyright AERA 2014
MAKE CUMMINS MODEL ISB6.7 YEAR 2005-2017 VIN LITER 6.7 CID 409 CYL L 6
BORE/STROKE 4.2122-4.2130" (106.990-107.010 MM) 4.882" (124.000 MM)
COMPRESSION RATIO FIRING ORDER 1-5-3-6-2-4
COMMENT B SERIES INTFR Yes
Parts Number
Part Number Vendor Name Description Size Qty
06-13-2019 11:48 AM
AERA
875 Feinberg Ct Ste 106
Cary, ILLINOIS 60013
Ph.8155267600
karen@aera.org
The information contained within PROSIS PRO is provided by the best available sources. AERA
does not assume responsibility for data accuracy or consequences of its application. Members
and others are not authorized to reproduce or distribute this material or issue it to branches,
divisions or subsidiaries at a different location. ©Copyright AERA 2019
Torque
Oilling
06-13-2019 11:48 AM