Professional Documents
Culture Documents
Carta de Formas de Dientes General
Carta de Formas de Dientes General
Resin Teeth SR Antaris DCL SR Vivodent DCL SR Vivodent PE SR Vivodent SR Postaris DCL SR Orthotyp DCL SR Ortholingual DCL SR Orthoplane DCL SR Orthosit PE SR Orthotyp PE SR Orthotyp Ceramic Teeth Vivoperl PE Vivoperl PE Orthotyp Radiopaque Teeth SR Vivo TAC/SR Ortho TAC
Selection Criteria
Anterior Teeth
Ivoclar Vivadent anterior teeth are categorized into square, tapering, and ovoid shapes. Although these are only general descriptions, there are certain characteristics that can be ascribed to each category. However, it should be noted that each mould has its own individual character and should be viewed in the context of a complete set rather than focusing only on this one set of criteria. Layers Anterior Teeth
Square tooth moulds With this angular shape, the central incisor is dominant. The gingivo-incisal curvature is moderate and the residual ridge is markedly square, indicating a normal bite.
Triangular tooth moulds This group is characterized by teeth having a rejuvenating crown which tapers towards the cervical ridge. The gingivo-incisal curvature is moderate. The large central incisor has an attractive, slightly triangular shape. The residual ridge is also triangular, sometimes indicating a crossbite.
Oval tooth moulds The teeth of this category have a pronounced gingivoincisal curvature. The oval residual ridge often indicates an overbite.
PE stand for Pearl Effect. PE teeth have a fourth layer that adds a bluish iridescent effect which increases light reection and creates a more natural appearance.
A/P
Tooth Line
Shade systems
Chromascop PE AD Bleach PMMA
Mater
DCL
A P A P P P A P A P P A P
SR Antaris DCL SR Postaris DCL SR Vivodent DCL SR Orthotyp DCL SR Orthoplane DCL SR Ortholingual DCL SR Vivodent PE (4-Schicht) SR Orthotyp PE (4-Schicht) SR Vivodent SR Orthotyp SR Orthosit PE Vivoperl PE Vivoperl / Orthotyp PE
X X X X X X X X X X X X X X X X X X X X X X X X X
X X X X X X
Posterior Teeth
This tooth selection chart facilitates the selection of corresponding sizes to match the selection anterior teeth. Ivoclar Vivadent offers a variety of posterior occlusal options, which give the clinician the opportunity to select a tooth form that will best meet the functional and esthetic needs of the patient.
N-type mould for normal bite With normal bite types (according to Angle, Class I), the intervestibular line of the anterior prole curve is perpendicular to the occlusal plane. For these patients, Ntype moulds are to be used. They are available in ve different sizes.
T-type mould for overbite In the rehabilitation of a deep overbite (distal bite, Class II), the receding mandible contrasts with the protruding maxilla. The overbite requires posteriors with steep cusp inclination. For that reason, T-type moulds should be selected. They are available in two sizes.
K-type mould for crossbite In a crossbite situation (Class III), a protruding mandible results in the intervestibular line forming a relatively acute angle in relation to the occlusal plane. Ktype moulds are thus indicated, as their inclination is relatively at. They are also available in two sizes.
al
osit
Ceramics
Layers
3 3 3 3 3
4
SR Postaris DCL SR Postaris DCL is the exquisite posterior tooth for complete dentures, but particularly for partial dentures. The natural occlusal scheme allows the patient excellent mastication, supports functional movements and offers the user a large range of set-up concepts.
SR Ortholingual DCL The new SR Ortholingual DCL posterior tooth combines aesthetics, functional occlusion, and excellent abrasion behaviour. SR Ortholingual DCL offers an easy and functional setup concept, particularly for the lingualized set-up theory.
SR Orthoplane DCL SR Orthoplane DCL is the 0 posterior tooth, the main feature of which is the simple occlusal anatomy. It is particularly suitable for geroprosthodontics. The special morphology offers the patient maximum occlusal scope and reduces time when grinding the teeth during treatment.
4
3 3
X X X
4 6 4
Anterior Teeth
SR Vivodent PE / SR Antaris DCL / SR Vivodent DCL / SR Vivodent / Vivoperl PE
Square Tooth Moulds
8.4 7.94
9.6 7.58
A11
A21
41.4
40.0
8.80
A12
A22
45.1
8.48
42.8
9.6 7.84
9.80
A13
A24
43.6
8.46
42.3
10.6 8.40
10.80
A14
A24B
46.2
8.84
43.2
10.5 8.42
10.80
A15
A25
49.1
8.96
47.1
10.7 8.72
12.60
A16
A26
50.7
9.40
47.1
12.0 8.78
13.0
A17
A27
51.9
9.84
48.5
11.0 8.92
8.60
A64
A41
47.1
8.64
41.9
9.9 8.08
10.4
A66
A42
46.1
8.70
43.9
10.0 7.86
9.70
A68
A44
49.4
9.28
41.9
A69
49.6
11.5
Anterior Teeth
SR Antaris DCL / SR Vivodent DCL / SR Vivodent PE / SR Vivodent / Vivoperl PE
Oval Tooth Moulds
9.4
A31
42.8
A1
7.84
31.0
7.9 4.52
A32
9.5
A2
44.7
9.38
33.2
9.2 4.84
A34
10.0
48.0
A3
8.66
32.4
8.2 4.76
A36
10.3
46.4
A4
8.64
32.2
9.4 4.82
A37
11.7
48.1
A5
9.02
34.5
8.5 5.24
A6
34.6
9.5 5.04
A7
36.0
9.3 5.60
A52
8.9
41.8
A8
7.70
38.1
9.5 5.76
A54
9.6
46.4
A9
8.66
36.5
12.2 5.72
A56
10.3.
47.5
A10
8.84
37.5
9.1 5.70
The following tooth moulds are not available: SR Antaris DCL: A21, A1 SR Vivodent and SR Vivoperl PE: A16, A26, A37, A69 SR Vivodent DCL: A1, A10, A21, A31, A34, A52, A64
Posterior Teeth
SR Orthotyp PE / SR Orthosit PE / SR Orthotyp DCL / SR Orthotyp Vivoperl PE Orthotyp
N2
30.2
8.62
8.28
32.2
N3
29.0
8.64
8.14
31.6
N4
31.6
9.16
8.74
34.1
N5
31.2
8.50
8.14
33.8
N6
34.1
9.74
9.18
36.4
Posterior Teeth
SR Orthosit PE / SR Orthotyp PE
T4
30.5
8.54
7.52
33.5
T6
31.5
9.28
8.62
33.7
K2
26.5
7.42
7.38
30.2
K4
29.8
8.32
8.52
33.0
Posterior Teeth
SR Postaris DCL
30.0
10.52
PU-1
10.30
PL-1
32.6
PU-1.5
31.1
10.50
PL-1.5
10.32
33.1
PU-2
32.3
11.42
10.36
PL-2
34.4
PU-3
33.6
11.28
9.90
PL-3
35.1
PU-3.5
34.1
11.26
PL-3.5
9.88
36.1
PU-4
34.3
10.86
10.40
PL-4
36.6
Posterior Teeth
SR Ortholingual DCL
LU3
30.9
9.0
8.38
LL3
32.0
LU5
32.8
9.54
8.86
LL5
33.9
LU6
34.1
9.90
9.48
LL6
36.0
SR Orthoplane DCL
MU3
31.0
9.12
9.96
ML3
31.6
MU5
32.9
9.68
8.64
ML5
33.8 34.7
10.16
MU6
9.65
ML6
35.7
Combination Table
Diese Kombinationstabelle wird als Richtlinie empfohlen. Bei besonderen anatomischen Verhltnissen sind Abweichungen mglich.
Posterior Teeth
Porcelain
Resin normal
NN3 N3
Resin cross-bite
K-
Resin overbite
TT4 T4 T4 T4
L-
M-
A 11 A 12 A 13 A 14 A 15 **A 16 A 17 A 64 A 66 A 68 **A 69 A3 A5 A5 A6/A7 A8 A 9 / A 10 A9 A5/A7 A5/A7 A7 A7/A8 PU-1 / PL-1 PU-1 / PL-1, PU-1.5 / PL-1.5 PU-2 / PL-2 PU-3 / PL-3, PU-3.5 / PL-3.5 PU-3.5 / PL-3.5, PU-4 / PL-4 PU-4 / PL-4 PU-4 / PL-4 PU-2 / PL-2, PU-3 / PL-3 PU-3 / PL-3 / PU-3.5 / PL-3.5 PU-3.5 / PL-3.5 / PU-4 / PL-4 PU-4 / PL-4 N3 N2 N2 N4 N4 N6 N6 N4 N4 N4 N6 K2/K4 K2/K4 K4 K4 K4 K4 K4 K4 K4 K4 K4 LU3 / LL3 LU3 / LL3 LU3 / LL3 LU5 / LL5 LU5 / LL5 LU5 / LL5 LU6 / LL6 LU5 / LL5 LU6 / LL6 LU5 / LL5 LU5 / LL5 LU5 / LL5 LU5 / LL5 LU6 / LL6 MU3 / ML3 MU3 / ML3 MU3 / ML3 MU5 / ML5 MU5 / ML5 MU5 / ML5 MU6 / ML6 MU5 / ML5 MU6 / ML6 MU5 / ML5 MU5 / ML5 MU5 / ML5 MU5 / ML5 MU6 / ML6 N3/N5 N5 N4 N6 N6 N5 N5 N4/N5 N4/N6
T4 / T6 T4 / T6 T4 T4 T4 T4 T4 / T6
*A 21 A 22 A 24 A 24 B A 25 **A 26 A 27 A 41 A 42 A 44 A3 A3 A2 A4/A5 A 10 A7 A8 A3/A5 A5 A3 PU-1 / PL-1, PU-1.5 / PL-1.5 PU-2 / PL-2 PU-2 / PL-2 PU-3 / PL-3, PU-3.5 / PL-3.5 PU-3.5 / PL-3.5, PU-4 / PL-4 PU-4 / PL-4 PU-1 / PL-1, PU-1.5 / PL-1.5 PU-1 / PL-1, PU-1.5 / PL-1.5 PU-1 / PL-1, PU-1.5 / PL-1.5 N2 N2 N2 N2 N4 N4 N4 N2 N2 N2 N3 N3/N5 N2 N2 N4 N4 N4 N3/N5 N3/N5 N3/N5 K2/K4 K2/K4 K4 K4 K4 K4 K4 K2/K4 K4 K2/K4 T4 T4 T4 T4 T4 T4 / T6 T4 T4 T4 T4 LU3 / LL3 LU3 / LL3 LU3 / LL3 LU3 / LL3 LU5 / LL5 LU5 / LL5 LU5 / LL5 LU3 / LL3 LU5 / LL5 LU3 / LL3 MU3 / ML3 MU3 / ML3 MU3 / ML3 MU3 / ML3 MU5 / ML5 MU5 / ML5 MU5 / ML5 MU3 / ML3 MU5 / ML5 MU3 / ML3
A 31 A 32 A 34 A 36 **A 37 A 52 A 54 A 56 A3 A3/A5 A5 A7 A7/A8 *A 1 / A 3 A5 A7/A8 PU-1 / PL-1 PU-1.5 / PL-1.5, PU-2 / PL-2 PU-2 / PL-2, PU-3 / PL-3 PU-3 / PL-3, PU-3.5 / PL-3.5 PU-3.5 / PL-3.5, PU-4 / PL-4 PU-1 / PL-1, PU-1.5 / PL-1.5 PU-2 / PL-2, PU-3 / PL-3 PU-3 / PL-3, PU-3.5 / PL-3.5 N2 N2 N4 N4 N4 N1 N5 N4 N3 N3/N5 N5 N5 N5 N3 N5 N5 K2/K4 K2/K4 K4 K4 K4 K2/K4 K4 K4 T4 T4 T4 T4 T4 / T6 T4 T4 T4 LU3 / LL3 LU5 / LL5 LU5 / LL5 LU5 / LL5 LU5 / LL5 LU3 / LL3 LU5 / LL5 LU5 / LL5 MU3 / ML3 MU5 / ML5 MU5 / ML5 MU5 / ML5 MU5 / ML5 MU3 / ML3 MU5 / ML5 MU5 / ML5
* The tooth moulds A21 und A1 are not available for SR Antaris DCL. ** The tooth moulds A16, A26, A37, A69 are only available for the tooth lines SR Antaris DCL, SR Vivodent DCL and SR Vivodent PE.
Radiopaque Teeth
SR Vivo TAC / SR Ortho TAC
Radiopaque teeth for the fabrication of diagnostic stents
The new radiopaque teeth SR Vivo TAC / SR Ortho TAC offer an efficient solution for determining the future placement, location and angulation of implants. The innovative SR Vivo TAC / SR Ortho TAC teeth allow the diagnostic steps needed for planning the placement of implants to be conducted carefully.
Anterior Teeth
Posterior Teeth
N2
30.2
8.62
A15
49.1
10.8 8.96
8.28
32.2
A24B
10.5
N6
43.2
8.42
34.1
9.74
A25
10.7
9.18
47.1
8.72
36.4
A27
11.0
48.5
8.92
A4
9.4
32.2
4.82
A8
9.5
38.1
5.76
A9
36.5
12.2
5.72
Shade selection
with the Chromascop shade guide SR Antaris DCL SR Postaris DCL (also available in AD shades) SR Vivodent SR Orthotyp SR Ortholingual DCL (AD shades also available) SR Orthoplane DCL (AD shades also available) The Chromascop is the shade standard for the Ivoclar Vivadent lines of products. The uniform shading of C&B veneering materials (e.g. IPS d.SIGN, SR Chromasit), the SR Antaris anterior and the SR Postaris posterior tooth line sets new standards especially for combined denture prosthetics. with the SR Vivodent PE / Vivoperl PE special shade guides SR Vivodent PE SR Orthotyp PE Vivoperl PE Vivoperl PE Orthotyp The special shade guides are coordinated with SR Vivodent PE/SR Orthotype PE / SR Vivoperl PE / SR Vivoperl PE Orthotyp tooth lines. The special Pearl effect renders these tooth lines especially suitable for complete denture prosthetics.
These products have been developed solely for use in the fabrication of dental tooth restorations or tooth placements. Processing should be done strictly according to the Instructions for Use. Descriptions and data constitute no warranty of attributes and are not binding. Printed in Liechtenstein Ivoclar Vivadent AG, Schaan/Liechtenstein 561355/1103/3/e/BVD
Ivoclar Vivadent AG Bendererstr. 2 FL-9494 Schaan Principality of Liechtenstein Tel. +423 / 235 35 35 Fax +423 / 235 33 60 www.ivoclarvivadent.com
Frontzhne
obere uppers
Ivostar
9,5
31
42,1
7,9
01
40,4
9,4
7,7
10,5
32
45,0
8,6
02
43,0
9,6
8,2
10,0
33
45,9
8,8
03
10,4
44,7
8,2
11,0
34
45,4
8,7
04
46,8
10,0
8,8
11,3
35
47,8
8,9
05
47,7
10,0
8,9
9,6
42,2
7,7
untere lowers
8,2
41
10,4
42
11
45,0
8,5
36,0
5,1
10,5
43
12
48,4
8,6
34,2
9,1
4,9
11,5
44
13
47,3
8,7
32,9
8,8
4,8
12,4
45
14
48,7
9,3
33,1
9,5
5,0
15
35,2
10,2
5,3
16
37,6
10,6
5,6
Seitenzhne
Gnathostar
28,9
31,0 28,7
Formen Es steht eine Formenpalette von Ivostar-Frontzhnen in 15 Oberkiefer- und 6 Unterkieferformen zur Verfgung. Die Frontzhne unterscheiden sich als dreieckige, quadratische und ovale Formen sortiert von klein bis gross. Die Gnathostar-Seitenzhne beinhalten 5 obere und 5 untere Zahngrssen. Farben Der Chromascop, Farbschlssel basiert auf 20 Zahnfarben, welche auf bewhrte Ivoclar Vivadent Dentinfarben aufgebaut sind. Somit ist der Chromascop der Farbschlssel fr smtliche prothetische Restaurationen in IPS d. SIGN, IPS Empress sowie fr die gesamte Partial- und Totalprothetik. Zustzlich sind die Formen auch in AD- und Bleach Farben erhltlich. Schichtung Ivostar/Gnathostar sind Mehrschichtzhne und adaptieren durch ihre harmonische Schichtung die Natrlichkeit des Originals.
Moulds A wide range of 15 upper and 6 lower Ivostar anterior molds; 5 upper and 5 lower Gnathostar posterior molds. The anteriors come in three schapes: triangular, rectangular, and oval arranged from small to large. Shades The Chromascop shade guide comprises 20 shades based on the tried and tested Ivoclar Vivadent dentin shades. The Chromascop is therefore the shade guide for all prosthetic restorations for Ivoclar Vivadent metal-free ceramics, for IPS Empress, as well as for partial and complete dentures. Also moulds are available in AD- and Bleach shades. Layering Harmonized layering gives Ivostar/Gnathostar teeth the natural appearance of the original tooth.
D82
D80
31,2 30,7
D84
33,9 30,7
D86
32,9 33,5
D88
35,6
Ivostar / Gnathostar
Auswahlkriterien
Zur Auswahl gibt es mehrere Methoden, zu der Kopfform, Krperbau sowie feminine oder maskuline Erscheinung herangezogen werden. Zustzlich kann man jedoch, wenn Informationen ber Grsse, Form und Stellung der Zhne gnzlich fehlen, aus der Oberkieferform Anhaltspunkte gewinnen. Aus der grossen Zahl von Oberkieferformen kann man grundstzlich drei Formentypen ableiten. quadratische dreieckige ovale Ordnet man die Ivoclar Vivadent Frontzhne in ihrer anatomischen Erscheinung diesen drei Grundformen zu, ergibt sich folgende Einteilung. Die Auswahl der unteren Ivoclar Vivadent Frontzhne erfolgt mit Hilfe der Kombinationstabelle. Die Zahnfarben sind in 5 Farbgruppen unterteilt und numerisch nach Farbintensitt chromatisch angeordnet. Der Chromascop Farbschlssel indiziert sich als einheitlicher Farbstandard fr die gesamte Ivoclar Vivadent Produktepalette. Tooth shades are chromatically divided into 5 groups and numerically organized according to shade intensity. The Chromascop shade guide is the uniform shade standard for the entire Ivoclar Vivadent product range.
31, 32, 33, 34, 35. Diese Zahngruppe ist geprgt durch Zhne mit schlankem, sich nach zervikal verjngendem Kronenverlauf. Die vertikale Labialkrmmung ist mittelmssig stark ausgeprgt. Der grosse Schneidezahn hat eine gefllige, leicht dreieckige Form. Der Kieferkammverlauf ist ebenfalls dreieckig und weist im Wesentlichen auf Kreuzbissverhltnisse hin. 31, 32, 33, 34, 35. These groups are characterized by teeth having a rejuvenating crown which tapers towards the cervical ridge. Gingivo-incisal curvature is somewhat more pronounced. The large central incisor has an attractive, slightly triangular form. The residual ridge is also triangular and basically indicated for cross-bite.
41, 42, 43, 44, 45. Die Formen sind eher eckig und der zentrale Schneidezahn hat eine relativ dominante Erscheinung. Die vertikale labiale Krmmung zeigt einen gemssigten Verlauf. Der Kieferkammverlauf ist betont eckig und zeigt Tendenzen fr einen Normalbissfall. 41, 42, 43, 44, 45. These molds are basically quadrilateral and the central incisor relatively dominant. Gingivo-incisal curvature is moderate. The residual ridge is markedly square and tends to be indicated for cases involving normal bite.
01, 02, 03, 04, 05. Das anatomische Erscheinungsbild dieser Gruppe zeigt starke Krmmungsmerkmale. Dies zeigt sich vor allem in einer ausgeprgten Labialkrmmung. Der ovale Kieferkammverlauf ist oft bei Tiefbissfllen zu nden. 01, 02, 03, 04, 05. These groups are anatomically characterized by pronounced gingivo-incisal curvature. An oval residual ridge is often found in cases of deep overbite.
Farben: Die Farbbestimmung der Ivostar/Gnathostar-Zhne erfolgt mit dem Chromascop-Farbring. Shades: Ivostar/Gnathostar teeth are selected and coordinated with the Chromascop shade guide.
Darstellungen und Angaben enthalten keine Zusicherung von Eigenschaften und sind nicht bindend. Descriptions and data constitute no warranty of attributes and are not binding. Printed in Liechtenstein Ivoclar Vivadent AG, Schaan/Liechtenstein 561353/0504/d/e/3/BVD
Hersteller und Vertrieb Ivoclar Vivadent AG Bendererstr. 2 FL-9494 Schaan Frstentum Liechtenstein Tel. +423 / 235 35 35 Fax +423 / 235 33 60 www.ivoclarvivadent.com
Vertrieb Deutschland Ivoclar Vivadent GmbH Dr. Adolf-Schneider-Str. 2 D-73479 Ellwangen, Jagst Tel. +49 (0) 79 61 / 8 89-0 Fax +49 (0) 79 61 / 63 26 info@ivoclarvivadent.de www.ivoclarvivadent.de