Professional Documents
Culture Documents
Flat Slab Modelling in SAFE Program
Flat Slab Modelling in SAFE Program
4. Load Combo
Ult1 (1.2DL+1.6LL) Ult2 (1.4DL) Service(DL+LL)
5. Draw Column
Size:500x500, Concrete Grade:C30 Column at Centriod, 3m Height
6. Draw Slab
Critical Slab THK=5500/30=183mm(T420, Exterior Panel, without edge beam), Use 200mm THK
10. Result
a. Settlement (Service)
b. Point Reaction(Ult1)
Middle Strip
b. Strip B
Column Strip
Middle Strip
b. Load Combo
c. Result Deflection
-13.24mm<5500/240=22.9mm (Roof/ Floor construction supporting or attached to non-structural
elements not likely to be damaged by large deflection)
Capital and Drop Panel
1. Slab Thickness
Slab Thickness=150mm
2. Draw Beam
Size:600x250, Grade:C30,Rebar:T420, Cover:75mm
3. Assign Surface Load
DL=4kPa, LL=5kPa
18.Summary
Drop Panel Drop Captial
1.2m x 1.2m x0.25m 1.3m x 1.3m x0.6m
1. Flat Slab
a. Setting
Edge Distance=Column Size
Post-Tension
b. Layout
c. Post-Tension
2. Flat Slab with Perimeter Beams
a. Setting
b. Layout