Professional Documents
Culture Documents
2518 TP
2518 TP
FRONT AXLE
BEST FOR HEAVY-DUTY WORK.
F Overall Width (Cab) : 2475 Forged I Section – Reverse Elliot type
G Overall Width (Rear Tyres) : 2494
H Wheel Track - Front : 2020 FRAME
J Wheel Track - Rear : 1856 All Steel, Ladder Type Bolted Cross members.
K Front Axle to Back of Cabin : 760 Side Member: 256 x 75 x 7mm Channel reinforced
L Approach Angle : 19° with inner channel section of 4 mm thick
M Departure Angle : 49°
N Min Ground Clearance - Front : 285 SUSPENSION
O Min Ground Clearance - Rear : 270 Front: Semi elliptical leaf springs. Span: 1650 mm
P Frame Width : 864 Rear: Bell crank springs Span: 1279mm
AMW/2012/11/2518TP/REV01
Oil Sump Capacity: 15.4 Ltrs Service Brakes: Dual Circuit full Air
Air Filter : Dry type Remote Mounted Parking Brake: Spring actuated on Rear Axles
Oil Filter : Full Flow Paper Type Engine Exhaust brake: Butterfly type, provided
Fuel Filter: Single filter with water separator
Fuel Injection Pump: Rotary FIP ELECTRICAL SYSTEM
Fuel Tank: 240 Ltrs System : 24 Volt (Negative Earth)
Alternator : 45 Amp
CLUTCH Battery: 2 x 12V x 130 Amp hr (20 hr rating)
SETCO Ø 380 mm Single dry plate Coil type clutch
with Hydro pneumatically operated CABIN
24x7 TOLL FREE HELPLINE: Fully furnished, Tiltable Sleeper fixed Non AC Cabin.
GEAR BOX
1800-209-2447 Model: Eaton ES 9306 SD Gear Box – Synchromesh
Speed Ratios:
BODY & TIPPING SYSTEM
All steel welded body construction with automatic
I – 9.01, II – 5.27, III – 3.22, IV – 2.04 tail gate. Capacity: 14 / 16 Cu.m
V – 1.36, VI – 1.00, Reverse – 8.63 Single Ram, Front end tipping - Tipping angle>48°
Do not weld or drill chassis. Technical Specifications are subject to change without notice.
AMW 2518 TP
• www.amwasia.com Asia MotorWorks Ltd. AsiaMotorWorks Accessories shown are not part of the standard fitment.
WITH BELL CRANK SUSPENSION
AMW 2518 TP makes quarrying and 176 HP 5.9 LTR. ENGINE
Powered by India's most preferred engine
NOW
500 HOUR
BEST-IN-CLASS GRADABILITY
High first gear ratio of 9.01 that ensures
anunbeatable gradability of 26%.
Unladen Laden Fully floating Tandem Rear Axles – Both Driven PERFORMANCE (@ 25000Kgs)
chassis (CMVR) Hypoid Bevel Gears with Interaxle diff. lock – air (With 6 Speed Gearbox)
operated Max Speed - geared (KMPH) : 79
Front Axle: 2958 6000 Ratio: 6.17 Max. Gradeability (%) : 23
Min. Turning Circle Radius-m : 7.8
Rear Axle: 4128 19000
FRONT AXLE (With 9 Speed Gearbox)
Total: 7086 25000 Heavy duty Forged I Section – Reverse Elliot type Max Speed - geared (KMPH) : 78
Max. Gradeability (%) : 34
FRAME Min. Turning Circle Radius-m : 7.8
HSLA Steel, Ladder Type Bolted Cross members.
Disclaimer:
Side Member: 256 x 75 x 7mm Channel reinforced Any modification related to chassis to be done with
with inner channel section of 5 mm thick. prior approval from R&D, AMW.
Do not weld or drill chassis. Technical Specifications are subject to change without notice. Accessories shown are not part of the standard fitment.