BSC 1 Sem Electronics Basic Circuit Theory

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

*SLRST11* SLR-ST – 11

Seat
No. 5 A J

B.Sc. – I (Semester – I) (CBCS) Examination, 2018


ELECTRONICS (Paper – I)
Basic Circuit Theory and Network Analysis

Day and Date : Tuesday, 10-4-2018 Max. Marks : 70


Time : 10.30 a.m. to 1.00 p.m.

Instructions : 1) All questions are compulsory and carry equal marks.


2) Figures to the right indicate full marks.
3) Use of calculator is permissible.
4) Draw neat labeled diagram whenever necessary.

1. Choose correct alternative and rewrite the sentence : 14


1) The working principle of transformer is based on
a) Self inductance b) Conduction
c) Mutual inductance d) None of these
2) An ideal voltage source has ________ internal resistance.
a) Infinite b) Finite c) Zero d) All of these
3) Parallel resonance circuit is also called as ________ circuit.
a) Acceptor b) Rejecter c) Divider d) None of these
4) Kirchhoff’s current law is applied to a
a) Node b) Open circuit c) Close loop d) None of these
5) The Y parameters are same as ________ circuit impedance parameters.
a) Open b) Short c) Hybrid d) None of these
6) The reactance offered by capacitor to direct current is
a) 0 
b) 100 
c) 1M 
d) 

7) In pure resistive circuit the current is ________ with applied voltage.


a) In-phase b) Out of phase c) Lagging d) Leading
8) A sinusoidal AC current RMS value is 100 Amp; its maximum value is
________ Amp.
a) 78.61 b) 170 c) 141.44 d) 100

P.T.O.

https://www.solapurstudy.com/
SLR-ST – 11 -2- *SLRST11*
9) The RLC circuit above the resonant frequency behaves as
a) Inductive b) Capacitive c) Resistive d) None of these
10) The hybrid parameters are h11 is called as
a) Output conductance b) Reverse voltage gain
c) Forward current gain d) Input impedance
11) The color code for 33 K  
5% resistor is
a) Orange Orange Black Sliver b) Orange Orange Black Gold
c) Orange Orange Orange Silver d) Orange Orange Orange Gold
12) The T network is also called as _________ network.
a) Active b) Star c) Delta d) None of these
13) The resonance circuit is more selective when, its quality factor Q is
a) High b) Low c) Very high d) Very low
14) After applying Norton’s theorem, equivalent circuit will have a new
a) Voltage source in series with resistance
b) Current source in series with resistance
c) Current source in parallel with resistance
d) Voltage source in parallel with resistance

2. Attempt any seven of the following : 14


1) Define resistance, state its practical units.
2) If the inductor of 50 mH is connected to a generator with 50 Hz, find out the
inductive reactance.
3) Define the term :
i) Resonating frequency
ii) Band width of a series RLC circuit.
4) State Kirchhoff’s current law.
5) Draw the symbol of
a) Iron core inductor b) Variable capacitor
c) Step-up transformer d) Variable resistor.
6) What is fuse ? Which material is used in a fuse ?
7) Calculate the resonant frequency of a SeriesLCR circuit has an inductor of
1mH and capacitor of 10 f. 

Set P

https://www.solapurstudy.com/
*SLRST11* -3- SLR-ST – 11

8) Define the terms :


i) Peak value
ii) RMS value.
9) State maximum power theorem.

3. A) Attempt any two of the following : 10


1) Define capacitance, state its practical units. Give the classification of
capacitor.
2) State and prove Maximum Power Transfer Theorem.
3) Explain sinusoidal and non-sinusoidal current and voltage sources with
examples. Define
i) Period
ii) Frequency.
B) Find out current flowing through load resistance RL of a following dc network
using Thevenin’s theorem. 4

4 5


9V RL = 2
4


4. Attempt any two of the following : 14


1) Explain Parallel resonance circuit. Obtain expression for resonant frequency.
2) Find the value of z-parameters of the following circuit.

3) Explain the behaviour of series RLC circuit as resistive, capacitive and


inductive.
Set P

https://www.solapurstudy.com/
SLR-ST – 11 -4- *SLRST11*

5. Attempt any two of the following : 14


1) Write short note on
i) Relay
ii) Transformer.
2) Find out current flowing through each branch of following dc network using
Mesh analysis.

2 

4  1 

2V 6V

3) Define T and 

networks. Explain conversion T network to 

network.

————————

Set P

https://www.solapurstudy.com/

You might also like