Download as pdf or txt
Download as pdf or txt
You are on page 1of 125

1-800-662-2001 • www.nissantechmate.

com
Nissan / Infiniti SPECIAL SERVICE TOOLS

The Right Choice TOOL SECTION ................................PAGE


When Ordinary How To Order..........................................................II
Tools Won’t Do Feature Tools ........................................................III
Engine & Electrical
Every Kent-Moore Special Service Tool Electronic ..........................................................1
General ..........................................................13
and component in this catalog has been
Fuel & Emission Control
designed, developed and tested by the Engine ............................................................27
Air Conditioning Compressor & Clutch
Kent-Moore engineering department in R12 Systems ..................................................30
R134A Systems ..............................................34
conjunction with the service standards
General ..........................................................40
and procedures established by Nissan and Manual Transmission & Clutch ............................48
Automatic Transmission ......................................53
Infiniti. Kent-Moore tools are manufactured
Transaxle ..............................................................57
specifically for use under the prescribed Transfer Case........................................................60
and authorized service procedures called out Steering & Brakes ................................................62
Suspension & Body ..............................................70
in service manuals, bulletins and other
Differential & Axle ..............................................76
Nissan and Infiniti publications. The intent Supplemental Restraint System ..........................82
Tool Organizational Systems................................84
of these products is to enable the service
General Hand Tools ..............................................86
technicians to “Fix It Right the First Time,” Vehicle Identification Key ..................................101
resulting in a positive customer service Engine To Model Table ......................................102
Nissan to Kent-Moore
experience at your dealership. Cross-Reference Index ..................................103
Kent-Moore to Nissan
Cross-Reference Index ..................................107
Index ..................................................................111
Order Form..........................................................115

To order Special Service Tools call 1-800-662-2001 I


Nissan / Infiniti SPECIAL SERVICE TOOLS

HOW TO ORDER
DOING BUSINESS WITH SPX KENT-MOORE INFORMATION AND SPECIFICATIONS
SPX Kent-Moore special service tools are easy to purchase All information and specifications in this catalog are effective
and are available to the general public by simply contacting January 1, 2001 and are subject to change without notice. SPX
SPX Kent-Moore by phone, fax or mail. Kent-Moore reserves the right to make changes in design and
construction of the tools without obligation to incorporate such
* Phone 1-800-662-2001 U.S. and Canada changes in tools previously purchased.
* Fax 1-800-578-7375 U.S. and Canada RETURNED/REPAIRED GOODS POLICY
1-810-578-7375 Please include with the tool a letter describing the reason for
the return/repair and a copy of the invoice and/or packing slip.
* Mail SPX Corporation
Kent-Moore 1. All goods returned to SPX Kent-Moore for any reason must
28635 Mound Road be shipped PREPAID.
Warren MI 48092-3499
2. Please make all claims for SHORTAGES and DAMAGES
* Internet www.nissantechmate.com within twenty (20) days from receipt of shipment. CLAIMS
after this period may be not be honored.
UNIVERSAL TOOLS
Tools that have multiple applications and are utilized on a 3. To expedite return/repair processing, please include with
variety of vehicles have been incorporated into specific item a copy of the invoice and/or packing slip.
sections where their service procedures are most common.
The text information indicates their “universal” usage or may 4. Drop shipped items should be returned directly to the
specify “all Nissan and Infiniti vehicles”. manufacturer. Please call our Customer Service Department
for instructions on how to return drop shipped items.
CLASSIFICATION CHART
CLASSIFICATION 5. All returns will be inspected and may be subject to a
N = Nissan
USA CAN restocking fee.
N N I = Infiniti
I I
6. Send Returns/Repairs To:
Note: Shaded area denotes the tool was previously released as an essential tool.
U.S.A. Address Canada Address
TAXES SPX Corporation SPX Corporation
Kent-Moore Kent-Moore
United States Attn: Returned Goods c/o INTEX
State and local sales and/or use tax will be added to order if 655 Eisenhower Drive Attn: Returned Goods
applicable. Owatonna, MN 55060 434 Tecumseh Road East
Windsor, Ontario N8X 2R6
Canada
In Canada, prices include duty, freight to Windsor, brokerage
fee, and exchange rate. Taxes are added where applicable.
Freight from Windsor will be added to the invoice.

F.O.B. SHIPPING POINT


All tool shipments will be made F.O.B. Owatonna, Minnesota.
Shipment will be made by the method you specify. Normal
methods include United Parcel Service, Parcel Post or UPS Air.

II Nissan / Infiniti Special Service Tools


Feature Tools
J-44200
CONSULT II SCAN TOOL
The power of enhanced diagnostics in your hands.
Diagnoses even more systems than the original CONSULT while
meeting EPA requirements for standardized diagnostics.
Features:
◆ Replaces the CONSULT as the premier essential diagnostic
tool for Computerized On-Board Systems of Nissan and
Infiniti vehicles
◆ High-speed 32-bit Motorola Power PC processor which
allows rapid display of the monitored data in a real-time
graphical format
◆ Large, high resolution touch screen interface – twice the size
of the original CONSULT screen
◆ Diagnostic systems include Automatic Transmission, ABS, Cruise
Control (ASCD), Air Bag, Traction Control (TCS), In-Vehicle Multiplex
System (IVMS) and Smart Entrance Control Unit
◆ Includes diagnostic and NATS software cards
◆ Future program updates provided on ASIST CD-ROM
◆ Internal thermal paper printer
◆ Supports reprogramming of the electronic Control Module when used
with ECM reprogramming card, J-44200-ECMR
◆ Oscilloscope function
◆ Multimeter function
◆ High speed communications to the PC using provided Ethernet cable

J-44200-Y
CONSULT II Y-CABLE
What a great idea! Two cables in one. With this cable
attached to your CONSULT II you can connect to any
current Nissan or Infiniti CONSULT compatible vehicle.
No more running back and forth swapping between cables
depending upon the year of the vehicle. This also extends
the life of the connector pins at the CONSULT II end of the
cable. For road testing, just coil up the end of the cable
you’re not using out of the way, or hang it over the steering
column. Save time, and improve flexibility with this dual
connector Y-Cable.

To order Special Service Tools call 1-800-662-2001 III


Feature Tools
J-45178
TPS CONNECTOR
Every tech should have one. You know that Closed
Throttle Position Switch (CTPS) adjustment is
critical on vehicles with OBD II. The recommended
procedure calls for hooking up your ohm meter to
the hard contacts in the throttle position sensor.
That’s where this handy universal connector
comes in, allowing you easy, positive
connection even in tight locations. Armed
with this tool, your DVOM, and your feeler
gauges, you’re ready to ward off those TPS
related MIL and driveability incidents.

J-37228
SEAL CUTTER
Put that big screwdriver away! No more bent or dented
oil pans and gouged aluminum sealing surfaces when you
use this tool to quickly and easily separate parts that
are “glued” together with RTV silicone sealer. Ideal for
performing professional jobs of engine disassembly, while
saving you aggravation. Simply insert the thin,
wedge shaped blade between components
and tap in place with a hammer, then tap it
around the circumference of the part until
it comes loose. Highly recommended for
removing oil pans and rear timing chain
covers from aluminum or cast iron
engine blocks.

IV Nissan / Infiniti Special Service Tools


Feature Tools
J-42450-A
WHEEL HUB
CLEANING KIT
A unique design that brought accolades!
To minimize lateral run-out, cleaning
corrosion from the hub surface and
other hub components is recommended
before re-assembly after brake service
procedures. The J-42450-A provides a
quick, effective solution to clean those
hard to reach hub mounting surfaces at
the base of the wheel stud for either
front or rear disc brake rotors.

J-45500
CHAMPION EVAP TESTER
Take the mystery out of EVAP system leak diagnosis
with a method that actually lets you see where the
leak is. This LeakMaster EvapTraceUV is a dual-
phase tool. Phase one tests the integrity of the
vehicle’s fuel vapor recovery system by quickly
determining (in less than a minute) if in fact a leak
currently exists under pressure. That really shortens
your DTC confirmation time! Phase-two quickly
pinpoints the leak for you using both highly visible,
white vapor (or smoke) and UltraTraceUV technology.
UltraTraceUV leaves an ultraviolet dye fingerprint
deposited at the leak’s origin to enable you to locate
the source of the leak with a black light after testing.

To order Special Service Tools call 1-800-662-2001 V


Feature Tools
J-42598-20
DATA LINK
CONNECTORS
So, your big feet keep getting tangled up
with the CONSULT cable on a test drive?
Use this connector set to safely route
diagnostic equipment cables around
vehicle controls while driving. They
provide an immediate 90O bend in
either direction at the J1962 Data Link
Connector on the vehicle, where your
DLC-II cable attaches.

42-17680A
SCAVENGER REFRIGERANT
RECOVERY STATION
The Scavenger is an air-operated refrigerant recovery-only
station designed to remove contaminated refrigerant from
air conditioning systems and store it in a reusable tank for
proper disposal.

Features:
◆ No electricity, reducing the hazards of recovering
potentially flammable vapors.
◆ Attaches to either R-12 or R-134a vehicles for
contaminated refrigerant removal.
◆ Includes (1) 50 lb. tank with overfill protection.
◆ Built-in accumulator to eliminate possible compressor
damage by liquid refrigerant.

NOTE: Important, refrigerant collected with the Scavenger


should not be used in any A/C system.

VI Nissan / Infiniti Special Service Tools


Nissan / Infiniti SPECIAL SERVICE TOOLS

Lifetime Marathon Warranty.


Special Service Tools are
guaranteed for a lifetime to
Protect Your
perform as promised. See
inside back cover for details. Investment
Kent-Moore Special Service Tools have been carefully
Ready when you
are. Order online, designed to endure years of continuous use and provide
24 hours a day at:
www.nissantechmate.com technicians with the best vehicle service solutions. To

get the most satisfaction from your investment, follow

Call toll free to speak these proper care and handling recommendations:
with trained technical
specialists for product • Store tools in a clean, dry place off of the floor surface. Even
and customer service
support 1-800-662-2001. though most Kent-Moore Special Service Tools are either black
oxide or zinc-plated, moisture and dampness can greatly affect
Toll free fax, available
or damage both tools and electronic components.
24 hours. For prompt
service, dial 1-800-578-7375.
• Make every effort to separate tools during transit and storage
to avoid potential damage, which could affect tool performance.
When available, return tools to their proper storage units after
Overnight and second day
air delivery available upon each use for efficient time management.
request.
• Always use each Kent-Moore Special Service Tool for its intended
purpose to prevent damage to the tool and vehicle components.

Buy Direct: We accept • Routine cleaning of Kent-Moore Special Service Tools will keep
Visa, MasterCard, them looking new and ready for the next service application.
American Express,
Discover, COD or To clean black oxide or zinc-plated tools, we recommend using a
Dealer Account soft cloth and mineral spirits. Keep threaded tool applications well
lubricated with a high pressure lubricant to prevent rust and allow
components to move freely.

1-800-662-2001 • www.nissantechmate.com
SPX Service Solutions Limited Warranty
KENT-MOORE Lifetime Marathon Warranty
THIS WARRANTY IS EXPRESSLY LIMITED TO ORIGINAL RETAIL BUYERS OF SPX’S KENT-MOORE BRAND PRODUCTS OR PARTS (“KENT-MOORE PRODUCTS”).
THIS WARRANTY IS NOT ASSIGNABLE OR TRANSFERRABLE. SPX MAKES NO WARRANTY TO ANYONE ELSE, INCLUDING OTHER PURCHASERS AND/OR
USERS, AND NONE SHALL BE IMPLIED.
Except as otherwise provided in this warranty, KENT-MOORE Products are warranted against defects in materials and workmanship for the life of the KENT-
MOORE Product, meaning that point in time when the KENT-MOORE Product no longer functions due to normal wear. This warranty does not apply to
electronic products, which are covered by separate warranties. Nor does this warranty apply to the following items, which may be incorporated into or sold
with KENT-MOORE Products and which are sold “as-is” with all faults: chains, batteries, electric motors, knives and cutter blades. (Electric motors are
warranted by their manufacturers under conditions stated in their warranties.)
The sole and exclusive remedy for any KENT-MOORE Product found to be defective is repair or replacement, at the option of SPX. If this exclusive remedy is
deemed to have failed of its essential purpose, SPX’s liability shall not exceed the purchase price of the KENT-MOORE Product. In no event will SPX be liable
for any direct, indirect, special, incidental or consequential damages (including lost profit) whether based on warranty, contract, tort or any other legal theory.
This warranty does not cover any KENT-MOORE Product that has been abused, altered, worn out, contaminated, rusted, heated, ground, damaged due to side
loading, used for a purpose other than that for which it was intended, or used in a manner inconsistent with SPX/KENT-MOORE’s instructions regarding use.
The existence of a defect shall be determined by SPX in accordance with procedures established by SPX. No one is authorized to make any statement or
representation altering the terms of this warranty.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
SOFTWARE
The above warranty applies to KENT-MOORE Product software except that, instead of warranting against defects in materials and workmanship, SPX
warrants that KENT-MOORE Product software, when properly installed, will execute its programmed instructions. SPX does not warrant that software will
operate uninterrupted or error-free. KENT-MOORE Product software is proprietary, confidential information protected under copyright law. Users have no right
in or title to KENT-MOORE Product software other than a limited right of use revocable by SPX. KENT-MOORE Product software
may not be transferred or disclosed without the written consent of SPX and may not be copied except in ordinary backup procedures.
REPAIR
Should your KENT-MOORE Product require repair service, return it freight prepaid to an KENT-MOORE authorized service center,
and provide proof of purchase. If the KENT-MOORE Product is covered by warranty, SPX will return the repaired KENT-MOORE
Product or a replacement ground freight prepaid. If the KENT-MOORE Product is determined to be out of warranty, it will be
repaired for a reasonable charge plus return freight.
Revision 5/15/2000

Another time saving tool from Kent-Moore!


• www.nissantechmate.com

• New, easy to use format

• The latest tool information

• Open all hours

1-800-662-2001 • www.nissantechmate.com
Engine & Electrical
ELECTRONIC
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
222484 DIGITAL MULTIMETER Universal

0-1,000 Volt, Fluke 23

871207 1A-600V FUSE Universal

Pkg of 5 (BBS1 IR10KA)

892583 15A-600V KTK FUSE Universal

Quantity of 1. (1R 100KA BROWN)

AC-85 ALIGATOR CLIPS (250 VOLTS) Universal

Red and Black

AE-6160 20’ BOOSTER CABLES Universal

500 amp clamps

BT-1118 POCKET SHORTFINDER Universal

(Shirt Pocket Model)

BT-7308 POLARITY INDICATOR Universal

Meter, run along wire to quickly locate shorts –


even behind steel body panels or pillars.

To order Special Service Tools call 1-800-662-2001 1


Engine & Electrical
ELECTRONIC
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
BT-7707-A FUEL & TEMPERATURE GAUGE TESTER Universal

BT-8034-B SHORTTELL Universal

Locates shorts in minutes, solid state, 15 amp


current.

BT-8639-B ANTI-STATIC WRIST STRAP Universal

Features self-adjusting wrist strap.

J-21008-A TEST LIGHT, SELF POWERED Universal

Use 1.5volt AA Battery

J-33915 PULSE DURATION TESTER All EFI Models


(Except SPI)
CLASSIFICATION
USA CAN
N N

J-34142-B 12V UNPOWERED TEST LIGHT Universal

For use on Electronic Control Systems


(Micro-Pack Compatible)

J-34186 BATTERY POWERED TIMING LIGHT Universal

Power supplied by 2 internal inchD inch cell


batteries. Batteries included.

2 Nissan / Infiniti Special Service Tools


Engine & Electrical
ELECTRONIC
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-34267 COOLANT TEMPERATURE RESISTOR 22.5K SL Universal

CLASSIFICATION
USA CAN
N N

J-34273 DASH DIAGNOSTIC SUB-HARNESS 200SX (1984-1986)

For use on a Digital Dash


CLASSIFICATION
USA CAN
N N

J-34636 CIRCUIT TESTER Universal

J-34764-A SINGLE LIGHT FUSE TESTER Universal

Tests, removes and installs both blade and


glass-type automotive fuses.

J-34898 HIGH CURRENT SHUNT Universal

From 0-99 amps

J-35590 CURRENT CLAMP Universal

0-600 amps

J-35615 AUTOMATIC WIRE STRIPPER Universal

Strips 8 to 22 gauge solid or stranded wire.

To order Special Service Tools call 1-800-662-2001 3


Engine & Electrical
ELECTRONIC
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-35892 DIGITAL LOGIC PROBE Universal

J-36169-A FUSED JUMPER WIRE Universal

Provides an easy means of bypassing open


circuits.

J-36400 COMPUTEST TOOL SET Universal

Includes basic computer test lights, terminal,


release, terminal jumper, fuse tester, and
connector extensions in one kit.

J-36400-1 COMPUTEST TOOL FOR INJECTOR PULSES Universal

J-36400-2 CARBURETOR FUEL CONTROL PULSE TESTER Universal

J-36400-3 FUSE TESTER & INSTALLER Universal

J-36400-5 PUSH TERMINAL RELEASE TOOL Universal

Allows terminal release on the Weather Pack II


or push type terminals.

4 Nissan / Infiniti Special Service Tools


Engine & Electrical
ELECTRONIC
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-36569 DIAGNOSTIC SUB HARNESS Digital Dash
(300ZX Up to ‘89)

CLASSIFICATION
USA CAN
N N

J-36777-3 IGNITION TIMING HARNESS (Q45) Q45

CLASSIFICATION
USA CAN
N N
I I

J-36777-4 IGNITION TIMING ADAPTER COIL 300ZX, J30

CLASSIFICATION
USA CAN
N N
I I

J-37368-A ECCS CHECKER BOX TESTER All E.C.C.S. Vehicles

CLASSIFICATION
USA CAN
N N

J-37959 TACHOMETER HARNESS ADAPTER 1985-1995

CLASSIFICATION
USA CAN
N N

J-38381-KIT AIR BAG DEPLOYMENT TOOL KIT All SRS

CLASSIFICATION
USA CAN
N N
I I

J-38522 VARIABLE SIGNAL GENERATOR Universal

Hand-held tester with adjustable voltage.

To order Special Service Tools call 1-800-662-2001 5


Engine & Electrical
ELECTRONIC
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-38751-95INF INFINITI TERMINAL REPAIR KIT All Models (Infiniti)

CLASSIFICATION
USA CAN
I I

J-38751-95NI NISSAN TERMINAL REPAIR KIT All Models (Nissan)

CLASSIFICATION
USA CAN
N N

J-38752-A CELLULAR PHONE REPAIR KIT

All Utilizing Motorola Cellular Phone


CLASSIFICATION
USA CAN
I I

J-38792 ELECTRONIC VIBRATION ANALYZER (EVA) Universal

CLASSIFICATION
USA CAN
N N
I I

J-38792-25 INDUCTIVE PICKUP TIMING LIGHT Universal

J-39021 INJECTOR COIL BALANCE TESTER All Injectors,


Universal
CLASSIFICATION
USA CAN
N N
I I

J-39200 FLUKE 87 DIGITAL MULTIMETER KIT Universal

Includes: AC-85, TL-24, TP-20, 871207, and 892583.


CLASSIFICATION
USA CAN
N N
I I

6 Nissan / Infiniti Special Service Tools


Engine & Electrical
ELECTRONIC
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-39349 ANTENNA BEZEL SOCKET 300ZX, Q45

CLASSIFICATION
USA CAN
N N
I I

J-39387 IGNITION TIMING HARNESS Maxima

CLASSIFICATION
USA CAN
N N

J-39401-A SRS DEPLOYMENT FIXTURE Universal

Used to deploy passenger side (SRS) modules


out-of-car.

J-39565 ENGINE EAR ELECTRONIC LISTENING TOOL Universal

J-39570 CHASSIS EAR ELECTRONIC LISTENING TOOL Universal

J-39688 FLUKE 88 DIGITAL MULTIMETER Universal

Automotive digital multimeter with voltage,


resistance, current, and frequency.

J-39978 FLUKE 78 DIGITAL MULTIMETER Universal

Automotive digital multimeter with voltage,


resistance current, frequency, and temperature
functions.

To order Special Service Tools call 1-800-662-2001 7


Engine & Electrical
ELECTRONIC
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-41540 INTEGRATED HOMELINK TRANSMITTER TESTER All Vehicles With
Homelink Transmitter
This Tester Is Used To Diagnose Problems With
CLASSIFICATION The Homelink System
USA CAN
N N
I I

J-42220 UNIVERSAL 12V LEAK DETECTION LAMP

J-42992-98KIT OBD TERMINAL REPAIR KIT All Models - OBD II

CLASSIFICATION
USA CAN
N N
I I

J-43241 REMOTE KEYLESS ENTRY TESTER Universal

Used To Test Key Fobs


CLASSIFICATION
USA CAN
N N
I I

J-44200 CONSULT-II SCAN TOOL All Models

CLASSIFICATION
USA CAN
N N
I I

J-44200-2 CONSULT-II AC/DC POWER SUPPLY CONSULT-II

CLASSIFICATION
USA CAN
N N
I I

J-44200-4 CONSULT-II PAPER PACK (5 ROLLS)

8 Nissan / Infiniti Special Service Tools


Engine & Electrical
ELECTRONIC
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-44200-5 CONSULT-II DLC-II CABLE For 2000 year and
later models

CLASSIFICATION
USA CAN
N N
I I

J-44200-6 CONSULT-II DLC-I CABLE For 1989-2000 year


vehicles
CLASSIFICATION
USA CAN
N N
I I

J-44200-7 CONSULT-II TEST LEAD SET CONSULT-II

CLASSIFICATION
USA CAN
N N
I I

J-44200-11 CONSULT-II RS232 CABLE CONSULT-II

CLASSIFICATION
USA CAN
N N
I I

J-44200-12 CONSULT-II ETHERNET CABLE CONSULT-II

CLASSIFICATION
USA CAN
N N
I I

J-44200-17 CONSULT-II STORAGE CASE CONSULT-II

CLASSIFICATION
USA CAN
N N
I I

J-44200-32 CONSULT-II PAPER SPINDLE CONSULT-II

CLASSIFICATION
USA CAN
N N
I I

To order Special Service Tools call 1-800-662-2001 9


Engine & Electrical
ELECTRONIC
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-44200-99NATS CONSULT-II NATS SOFTWARE CARD CONSULT-II

CLASSIFICATION
USA CAN
N N

J-44200-CAN CONSULT-II SCAN TOOL All Models

CLASSIFICATION
USA CAN
N
I

J-44200-DIAG-A 16MB DIAGNOSTIC CARD FOR CONSULT-II CONSULT-II

CLASSIFICATION
USA CAN
N N
I I

J-44200-ECMR CONSULT-II ECM REPROGRAMMING CARD Universal

CLASSIFICATION
USA CAN
N N
I I

J-44200-Y CABLE J-44200 CONSULT-II

Y-Cable has both DLC-I and DLC-II connectors


CLASSIFICATION
USA CAN for use with all models
N
I

J-44373 BATTERY / STARTING / Universal


CHARGING SYSTEM TESTER
CLASSIFICATION
USA CAN
N
I

J-44373-PRT IR PRINTER & CARRYING CASE Universal

An Optional Infrared Printer Is Available For


Outputting A Paper Copy Of Individual Test
CLASSIFICATION
USA CAN Results And Warranty Code. Part Number:
N J-44373-Prt

10 Nissan / Infiniti Special Service Tools


Engine & Electrical
ELECTRONIC
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-45178 TPS TEST CONNECTOR Maxima, Pathfinder,
240SX, Sentra, Truck,
Used To Test The Throttle Position Sensor Frontier, Altima, Quest,
CLASSIFICATION I30, QX4
USA CAN
N N
I I

J-45295 TIRE PRESSURE MONITORING SYSTEM 2002 Infiniti


(TPMS) INITIALIZATION TOOL
CLASSIFICATION
USA CAN Used To Program The Pressure Sensors
I I

P-70053 BATTERY TESTER Universal

RPM-80 INDUCTIVE PICKUP Universal

Converts the magnetic field by the current in the


spark plug wire into a pulse that triggers an
RPM measurement. Used with Fluke 78 or
Fluke 88.

TL-24 TEST LEADS (1000 VOLTS) Universal

Red and Black

TOOL-4 COMPUTER TERMINAL RELEASE TOOL Universal

TOOL-7 CONNECTOR EXTENDERS (5PCS) Universal

To order Special Service Tools call 1-800-662-2001 11


Engine & Electrical
ELECTRONIC
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
TP-20 PROBE TIPS (1000 VOLTS) Universal

Red and Black

YA-8616 FUSE TAP Universal

Tests suspected faulty circuits—prevents


shorting across terminals in fuse block.

YU-5212 SUPERCRIMPER TOOL Universal

Crimping Tool

12 Nissan / Infiniti Special Service Tools


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
7100 ENGINE LIFTING BRACKETS Universal

205049 HEAVY DUTY ADJUSTABLE LIFT SLING Universal

⁄4 inch chain, 56’ long, 2,000 lb.


1

31609 LIFTING CHAIN Universal

⁄4 inch steel chain, 561⁄2 inch long, 2,000 lb.


1

capacity with swiveling safety hooks

BT-3373-F BELT TENSION GAUGE Universal

CLASSIFICATION
USA CAN
N N
I I

BT-3386-FVT BELT TENSION GAUGE W/OFFSET Universal

BT-8653-A TORQUE ANGLE EXTENSION Universal

⁄2 inch drive
1
CLASSIFICATION
USA CAN
N N
I I

J-3936-O3 PISTON RING GROOVE CLEANER Universal

Universal six-blade cutter; 2 cutters, 12 sizes


included.

To order Special Service Tools call 1-800-662-2001 13


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-5347-B DIAL BORE GAGE (3 3/32-8 INCH DIA) Universal

3 inch to 8 inch range (Used with J-23059-01)

J-5902-O1 CYLINDER HONE & GLAZE BREAKER Universal

21⁄2 inch to 53⁄4 inch diameter

J-8037 PISTON RING COMPRESSOR Universal

21⁄8 inch to 5 inch diameter


CLASSIFICATION
USA CAN
N N
I I

J-8062 VALVE SPRING COMPRESSOR (HEAD-OFF) Universal

CLASSIFICATION
USA CAN
N N

J-8087 CYLINDER BORE GAUGE Universal

21⁄2 inch to 9 inch diameter

J-8089 CARBON REMOVING BRUSH Universal

Cast iron and steel

J-9666 VALVE SPRING TESTER Universal

For springs up to 7 inch long and 21⁄2 inch in


diameter

14 Nissan / Infiniti Special Service Tools


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-21350 SPARK PLUG WIRE REMOVER PLIERS Universal

J-22700 OIL FILTER WRENCH (37⁄16 INCH-33⁄4 INCH) Truck, 200SX, 510, 710,
240Z, 260Z, 280Z, 610,
Minimum 37⁄16 inch, Maximum 33⁄4 inch 810, Maxima
CLASSIFICATION
USA CAN
N N

J-22738-O2 VALVE SPRING TESTER (4.5 INCHLONG/500LB) Universal

11.5mm maximum spring length, Load 0-500 lbs.


(0-230 kilos)

J-22775 OIL FILTER WRENCH (LARGE FILTERS) Truck, 200SX, 510, 610,
710, 240Z, 260Z, 280Z,
92mm 810, Maxima
CLASSIFICATION
USA CAN
N N
I I

J-22794 SPARK PLUG PORT ADAPTER Universal

For pressurizing cylinders with shop air.


Use with J-26336 Valve Spring Compressor.
CLASSIFICATION
USA CAN
N N

J-23688 COOLANT & BATTERY FLUID TESTER Universal

Refractory device. (Fahrenheit Scale)

J-23907 SEAL AND BUSHING PULLER Universal

⁄2-13 Thread with Clutch Pilot Bearing Puller


1
CLASSIFICATION
USA CAN Adapter
N N

To order Special Service Tools call 1-800-662-2001 15


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-24239-O1 HEAD BOLT WRENCH Universal

10mm Hex
CLASSIFICATION
USA CAN
N N
I I

J-24460-O1 RADIATOR PRESSURE TESTER Universal

CLASSIFICATION
USA CAN
N N
I I

J-25087-C OIL PRESSURE TESTER & PUMP PRIMER Universal

CLASSIFICATION
USA CAN
N N
I I

J-25225 OIL FILTER WRENCH 1200, 210, B210, 310,


F10
Minimum: 71mm, Maximum: 79mm
CLASSIFICATION
USA CAN
N N

J-25615-O1 ROCKER ARM PIVOT ADJUSTER Truck, 510, 610, 710,


810, 280SX, 240Z,
260Z, 280Z, Maxima
CLASSIFICATION
USA CAN
N N

J-25618-O2 VALVE GUIDE REAMER SET All Except 87 Pulsar

Consists of: J-25618-1,Guide Installer, J-25618-2


CLASSIFICATION
USA CAN 8mm Reamer, J-25618-3 12.2mm Reamer
N N
I I

J-25640-B CRANKSHAFT REAR OIL SEAL INSTALLER Truck, 510, 610, 710,
810, 200SX, 240Z,
260Z, 280Z, Maxima
CLASSIFICATION
USA CAN
N N

16 Nissan / Infiniti Special Service Tools


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-25660-C CHAIN STOPPER Sentra, Truck, 510,
610, 710, 810, 240Z,
260Z, 280Z, Maxima
CLASSIFICATION
USA CAN
N N

J-26095 REAR ENGINE CRANKSHAFT 1200, 210, B210, 310,


OIL SEAL INSTALLER F10
CLASSIFICATION
USA CAN
N N

J-26336-B VALVE SPRING COMPRESSOR Universal

CLASSIFICATION
USA CAN
N N

J-26336-20 VALVE SPRING COMPRESSOR ADAPTER Sentra

Use with J-26336-A


CLASSIFICATION
USA CAN
N N

J-26340-A CAM CHAIN SPROCKET HOLDER 510, 610, 710, 810,


200SX, 240Z, 260Z
280Z, Maxima, Truck
CLASSIFICATION
USA CAN
N N

J-26340-100 MODIFICATION KIT 510, 200SX, Truck,


Van, Pathfinder with
Use with J-26340-A. NA15-Z Engine
CLASSIFICATION
USA CAN
N N

J-26365-A PISTON PIN SERVICE SET Universal

CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 17


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-26400-1B INJECTOR NOZZLE TEST OIL All Diesel

Use with J-28829. 1 Gallon.


CLASSIFICATION
USA CAN
N N

J-26568 COOLANT & BATTERY FLUID TESTER Universal

(Centigrade Scale)

J-28428-E HIGH INTENSITY BLACK LIGHT KIT Universal

Lamp head rotates full 360 degrees and is


removable from base with 20 ft. cord. Includes
6 (1 oz.) containers of oil additive. UL listed.

J-28431-6 FLUORESCENT OIL DYE Universal

Add To Engine, Transmission, Or Power Steering


CLASSIFICATION
USA CAN To Find Leaks With The Uv Black Light Contained
N N In The A/C Dye Kit (J-43926)
I I

J-28826 DIESEL NOZZLE CLEANING KIT All Diesel

CLASSIFICATION
USA CAN
N N

J-28829 DIESEL INJECTOR NOZZLE TESTER All Diesel

CLASSIFICATION
USA CAN
N N

J-28830-A DIESEL COMPRESSION GAUGE SET All Diesel

CLASSIFICATION
USA CAN
N N

18 Nissan / Infiniti Special Service Tools


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-28830-15 DIESEL COMPRESSION GAUGE All Diesel

Quick Disconnect
CLASSIFICATION
USA CAN
N N

J-28831-A DIESEL INJECTION PUMP GEAR PULLER Sentra, Truck

CLASSIFICATION
USA CAN
N N

J-29545-6A FLUORESCENT COOLANT DYE Universal

Add To Coolant To Find Leaks With The UV Black


CLASSIFICATION
USA CAN Light Contained In The A/C Dye Kit (J-43926)
N N
I I

J-29661 UNIVERSAL BELT TENSION ADJUSTER Universal

J-29763 INJECTOR PUMP TIMING INDICATOR Diesel Maxima

CLASSIFICATION
USA CAN
N N

J-33049 CAMSHAFT BEARING SERVICE SET Universal

Includes five expandable collet style drivers.

J-33906 VALVE SHIM REMOVER & INSTALLER Diesel Sentra

CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 19


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-33907 VALVE SPRING COMPRESSOR ADAPTER Diesel Sentra

Use with J-8062


CLASSIFICATION
USA CAN
N N

J-33984-A RADIATOR PRESSURE ADAPTER Universal

Use with J-24460


CLASSIFICATION
USA CAN
N N
I I

J-33984-50 RADIATOR PRESSURE KIT

Use with J-33984-A


CLASSIFICATION
USA CAN
N N
I I

J-34274 OIL FILTER WRENCH Truck, Pathfinder,


300ZX, 200SX, Quest,
80mm Maxima, Q45, M30
CLASSIFICATION
USA CAN
N N
I I

J-34275 COOLANT TEMPERATURE SENSOR WRENCH Truck, Pathfinder,


300ZX, 200SX, Quest,
19mm Maxima, Q45, M30
CLASSIFICATION
USA CAN
N N
I I

J-34298 OIL PRESSURE GAUGE ADAPTER RL4F02A

Use with J-34301-C on page 54.


CLASSIFICATION
USA CAN
N N

J-35356 VALVE STEM SEAL REMOVER Sentra, Pulsar, 200SX,


Stanza, 310
Use with J-23907 Slide Hammer (Except CA16DE)
CLASSIFICATION
USA CAN
N N

20 Nissan / Infiniti Special Service Tools


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-35357 VALVE STEM SEAL INSTALLER Pulsar, Stanza,
200SX, Sentra, 310,
Use J-35357-1 for CA Series. Use J-35357-2 for CA&E Series
CLASSIFICATION E Series. (Except CA16DE)
USA CAN
N N

J-35357-4 VALVE STEM SEAL INSTALLER Pulsar, Stanza, 200SX


CA Small Seal
(Except CA16DE)
CLASSIFICATION
USA CAN
N N

J-35667-A CYLINDER LEAKDOWN TESTER Universal

J-35870 FRONT CRANK/RING GEAR OIL SEAL INSTALLER Q45

CLASSIFICATION
USA CAN
N N
I I

J-36466 VALVE OIL SEAL INSTALLER 87 Pulsar,


CA16DE
CLASSIFICATION
USA CAN
N N

J-36467 VALVE SEAL REMOVER Pulsar, NX, Sentra,


G20, CA16DE, SR20DE,
GA16DE
CLASSIFICATION
USA CAN
N N

J-36660-A ELECTRONIC TORQUE ANGLE METER Universal

(0-200 Ft. Lbs.)

To order Special Service Tools call 1-800-662-2001 21


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-36854 ENGINE STAND Universal

Heavy Duty Automotive Engine Stand, 1000-lb.


Capacity. Optional drip pan - order J-36859.

J-37140-A OIL FILTER WRENCH (65MM) NX, Sentra, G20,


SR20DE, GA16DE
CLASSIFICATION
USA CAN
N N
I I

J-37228 SEAL CUTTER Vehicles Utilizing


Liquid Gasket
Used for Oil Pan Removal and Rear Timing
CLASSIFICATION
USA CAN Chain Cover.
N N
I I

J-37990 ELECTRONIC TORQUE ANGLE METER Universal

(0-700 ft.lbs.)

J-38139 MAIN BEARING CAP REMOVER Q45

Used with a Slide Hammer


CLASSIFICATION
USA CAN
N N
I I

J-38187 VALVE SEAL INSTALLER Sentra, NX, GA16

CLASSIFICATION
USA CAN
N N

J-38387 BELT TENSION GAUGE 300ZX, J30

CLASSIFICATION
USA CAN
N N
I I

22 Nissan / Infiniti Special Service Tools


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-38606 VALVE SPRING COMPRESSOR Universal

J-38879-A FUEL TANK LOCK RING SOCKET G20, Altima, Maxima,


I30, P10, U13, A32
CLASSIFICATION
USA CAN
N N
I I

J-38955 VALVE OIL SEAL INSTALLER 240SX, Stanza,


Truck, KA24E
CLASSIFICATION
USA CAN
N N

J-38957 VALVE SHIM GAUGE PLATE KIT SR20DE, Sentra,


G20, NX
CLASSIFICATION
USA CAN
N N
I I

J-38958 INTAKE VALVE SEAL INSTALLER Sentra, NX, GA16DE

CLASSIFICATION
USA CAN
N N

J-38971 EXHAUST VALVE SEAL INSTALLER Sentra, NX, GA16DE

CLASSIFICATION
USA CAN
N N

J-38972 CAMSHAFT LIFTER STOPPER SET Sentra, NX, 240SX,


Altima, GA16DE,
KA24DE
CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 23


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-39386 VALVE SEAL INSTALLER Maxima, VE30DE

CLASSIFICATION
USA CAN
N N
I I

J-39580 ENGINE SUPPORT TABLE Universal

This Universal support table can be utilized to


support the engine cradle with the transmission,
if necessary, during removal of the engine out of
the bottom of the vehicle. It is a mobile table that
allows the engine to be easily removed and
supported.

J-39773 VALVE SPRING COMPRESSOR All

CLASSIFICATION
USA CAN
N N
I I

J-39821 CRANKSHAFT PULLEY PULLER Q45

CLASSIFICATION
USA CAN
I I

J-41056 HOLE SAW & DRILL Van, Universal

CLASSIFICATION
USA CAN
N N
I I

J-41471 VTC ASSEMBLY REBUILD KIT Maxima, VE30DE

CLASSIFICATION
USA CAN
I I

J-42056 CAP PLUGS (12) 300ZX, Maxima, M30,


VG30E Engine
Use when cleaning intake manifold gasket
CLASSIFICATION
USA CAN surface.
N N

24 Nissan / Infiniti Special Service Tools


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-43414 WIPER ARM REMOVAL TOOL 1995-98 Sentra

CLASSIFICATION
USA CAN
N N

J-43897-12A 12MM OXYGEN SENSOR THREAD CLEANER Universal

Used To Clean The 02 Sensor 12mm Internal


Threads And Seating Surface Of The Exhaust
Tube, Catalytic Converter, Or Exhaust Manifold.
It Has The Ability To Clean The 02 Seating
CLASSIFICATION
USA CAN Surface On Catalytic Converters With Limited
N N Internal Clearance
I I

J-43897-18 18MM OXYGEN SENSOR THREAD CLEANER 1995-96 Maxima,


1996 I30
When The Original 02 Sensor Is Removed From
The Bank 1 (B1) Or Bank 2 (B2) Exhaust System
Fitting, Some 02 Sensor Thread Material May
Remain. Use This Tool To Recondition The
CLASSIFICATION
USA CAN Exhaust System Threads Before Installing A
N N New 02 Sensor
I I

J-44002-19 LEAK DETECTOR 1999 Quest

CLASSIFICATION
USA CAN
N

J-44716 RING GEAR STOPPER Pathfinder, QX4

J-45074 VALVE SHIM LIFTER SET Sentra, QX4, Maxima,


Pathfinder, 130, Q45

J-45353 RING GEAR STOPPER Altima, Sentra,


G20, Q45

To order Special Service Tools call 1-800-662-2001 25


Engine & Electrical
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
L-20900 RADIATOR CAP PLIER Universal

Tool fits all standard radiator caps.

26 Nissan / Infiniti Special Service Tools


Fuel & Emission Control
ENGINE
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
7224 ALCOHOL DETECTION KIT Universal

J-23433 MULTIPLE CARBURETOR SYNCHRONIZER Any Multiple


Caburetor
(240Z, 260Z)
CLASSIFICATION
USA CAN
N N

J-23738-A MITYVAC-HAND VACUUM PUMP Universal

Made of high impact PVC.

J-26347-A 10MM CARBURETOR WRENCH 210, 310

CLASSIFICATION
USA CAN
N N

J-29653-A ULTRASONIC NOZZLE CLEANER Fuel Injectors,


Universal

J-33930 10MM/12MM CARBURETOR WRENCH All Carburetor Models

CLASSIFICATION
USA CAN
N N

J-35555 MITYVAC HAND VACUUM/PRESSURE PUMP Universal

Includes: 5 lengths of clear tubing, rubber


suction cup, molded storage case, reservoir jar,
automotive adapter package.

To order Special Service Tools call 1-800-662-2001 27


Fuel & Emission Control
ENGINE
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-36470 OXYGEN SENSOR WRENCH 17mm

CLASSIFICATION
USA CAN
N N

J-36471-A OXYGEN SENSOR WRENCH 22mm

CLASSIFICATION
USA CAN
N N
I I

J-38365-A O2 SENSOR WRENCH (3⁄8 INCH DRIVE) Q45, 300ZX, J30

J-39383-A GASOLINE TEST KIT Universal

J-41817 FUEL CAP PRESSURE TESTER OBD II

CLASSIFICATION
USA CAN
N N

J-42909 EVAP PRESSURE TESTER KIT Universal

CLASSIFICATION
USA CAN
N
I

J-42909-CAN EVAP PRESSURE TESTER KIT

CLASSIFICATION
USA CAN
N
I

28 Nissan / Infiniti Special Service Tools


Fuel & Emission Control
ENGINE
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-44002 FUEL LINE TOOL KIT 1999 Quest

CLASSIFICATION
USA CAN
N

J-44321 FUEL PRESSURE GAUGE/ADAPTER KIT 1999-01 Frontier,


2000-01 Xterra,
Used To Check Fuel Pressure 1999-01 Pathfinder,
2000-1 Maxima,
1999-01 Quest,
CLASSIFICATION
USA CAN 2000-01 I30,
N N 1999-01 Qx4
I I

J-45356 GAS CAP ADAPTER Universal

CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 29


Air Conditioning Compressor & Clutch
R12 SYSTEMS
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-22132-O2 ACCESS VALVE CORE REMOVER & Universal
INSTALLER A/C

Designed for 1⁄4 inch valve core type access


valves.

J-23575-B A/C MANIFOLD GAUGE SET (R-12) Universal

Three 72 inch hoses.

J-24095 A/C COMPRESSOR OIL INJECTOR Universal

J-24182-2A SCHRADER VALVE CORE REMOVER Universal

For R12 and R134a removal and Installation of


smaller sized Schrader valve cores.

J-24364-C VACUUM PUMP (R-12)

6.0 CFM, High Volume, lightweight package.

J-26695-5 VACUUM PUMP OIL Universal

(One Quart)

J-36843 A/C SERVICE MANUAL

For R-12 vehicles. Includes: System Diagnosis


Chart

30 Nissan / Infiniti Special Service Tools


Air Conditioning Compressor & Clutch
R12 SYSTEMS
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-36846 “FITS ALL” ADAPTER KIT

For R12 Systems. Used to hook up high side of


vehicle air conditioning system. Fits all makes,
all models.

J-38100-3 ACR3 INSTRUCTION MANUAL ACR3

For J-38100 Models

J-38100-10A FILTER DRIER CORES ACR3

Case of 6 filters. Essential for proper filtration


with ACR3 systems. For individual Filter Drier
Core - order J-38100-130.

J-38100-130 ONE FILTER DRIER CORE Universal

J-38100-24A 96 INCH BLUE LO-SIDE QUICK SEAL HOSE Universal

J-38100-25A 96 INCH RED QUICK-SEAL HOSE Universal

J-38100-26A 96 INCH YELLOW QUICK-SEAL HOSE Universal

To order Special Service Tools call 1-800-662-2001 31


Air Conditioning Compressor & Clutch
R12 SYSTEMS
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-38100-30 REFRIGERANT STORAGE TANK Universal

(30 lb) Refillable Tank

J-38100-577 MOISTURE INDICATOR Universal

J-38508 OIL INJECTOR Universal

J-38550-50B REFRIGERANT STORAGE TANK Universal

50 lb.Refillable Tank

J-38704-A A/C CHARGE VALVE OCTAGON SOCKET Universal

For R-12 Systems

J-38750-A ACR3

Air Conditioning Refrigerant Recovery and


CLASSIFICATION
USA CAN Recycling System for R12 Systems.
N N
I I

J-38800-B SMART CART Universal

R12 & R134a (34295) Charging Unit.

32 Nissan / Infiniti Special Service Tools


Air Conditioning Compressor & Clutch
R12 SYSTEMS
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-39475 R-12 A/C TRACER DYE Universal

Box of 24.

J-39500-10 FILTER DRIER - 1 PIECE Universal

For J-39400-B ACR4 unit.

J-39628 ACCESS VALVE CORE REMOVER & INSTALLER Universal

J-39649 VACUMASTER VACUUM PUMP Universal

2 stage, 115v, 60hz,4.0 CFM.

J-39770 ENVIRO-CHARGE Universal

Refrigerant, Recovery, Recycling and Recharge


System for R12.

J-39851 R12 PUREGUARD REFRIGERANT MONITOR All ACR3

CLASSIFICATION
USA CAN
N N
I I

J-41709 R-12 A/C TRACER DYE INJECTOR Universal

Use with J-39475 tracer dye.

To order Special Service Tools call 1-800-662-2001 33


Air Conditioning Compressor & Clutch
R134A SYSTEMS
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-24182-2A SCHRADER VALVE CORE REMOVER Universal

For R12 and R134a removal and Installation of


smaller sized Schrader valve cores.

J-26695-5 VACUUM PUMP OIL Universal

(One Quart)

J-38800-B SMART CART Universal

R12 & R134a (34295) Charging Unit.

J-39037 R-134A OCTAGON VALVE SOCKET

16mm Octagon Socket

J-39183-C R-134A MANIFOLD GAUGE SET Universal

Includes 3 - 72 inch hoses and high and low side


field service couplers.

J-39500-B ACR4 SYSTEM Universal

Air Conditioning, Refrigerant Recovery, Recycling


and, Recharging System for R134a.

J-39500-10 FILTER DRIER - 1 PIECE Universal

For J-39400-B ACR4 unit.

34 Nissan / Infiniti Special Service Tools


Air Conditioning Compressor & Clutch
R134A SYSTEMS
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-39500-20A HI SIDE- SMALL PROFILE COUPLER Universal

17⁄8 inch long


CLASSIFICATION
USA CAN
N N
I I

J-39500-24A LO SIDE -SMALL PROFILE COUPLER Universal

17⁄8 inch long


CLASSIFICATION
USA CAN
N N
I I

J-39500-36B 36 INCH BLUE ENVIROGUARD HOSE R134a

J-39500-36K 36 INCH ENVIROGUARD HOSE PACKAGE R134a

J-39500-36R 36 INCH RED ENVIROGUARD HOSE R134a

J-39500-36Y 36 INCH YELLOW ENVIROGUARD HOSE R134a

J-39500-48B 48 INCH BLUE ENVIROGUARD HOSE R134a

To order Special Service Tools call 1-800-662-2001 35


Air Conditioning Compressor & Clutch
R134A SYSTEMS
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-39500-48K 48 INCH ENVIROGUARD HOSE PACKAGE R134a

J-39500-48R 48 INCH RED ENVIROGUARD HOSE R134a

J-39500-48Y 48 INCH YELLOW ENVIROGUARD HOSE R134a

J-39500-50 REFRIGERANT STORAGE TANK Universal

(50 LB.) Refillable Tank

J-39500-60B 60 INCH BLUE ENVIROGUARD HOSE R134a

J-39500-60K 60 INCH ENVIROGUARD HOSE PACKAGE R134a

J-39500-60R 60 INCH RED ENVIROGUARD HOSE R134a

36 Nissan / Infiniti Special Service Tools


Air Conditioning Compressor & Clutch
R134A SYSTEMS
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-39500-60Y 60 INCH YELLOW ENVIROGUARD HOSE R134a

J-39500-71 ACR4 OIL INJECTION CONVERSION KIT ACR4

Includes three 12 oz. bottles and caps


CLASSIFICATION
USA CAN
N N
I I

J-39500-72B 72 INCH BLUE ENVIROGUARD HOSE R134a

J-39500-72K 72 INCH ENVIROGUARD HOSE PACKAGE R134a

J-39500-72R 72 INCH RED ENVIROGUARD HOSE R134a

J-39500-72Y 72 INCH YELLOW ENVIROGUARD HOSE R134a

J-39500-96B 96 INCH BLUE ENVIROGUARD HOSE R134a

To order Special Service Tools call 1-800-662-2001 37


Air Conditioning Compressor & Clutch
R134A SYSTEMS
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-39500-96K 96 INCH ENVIROGUARD HOSE PACKAGE R134a

J-39500-96R 96 INCH RED ENVIROGUARD HOSE R134a

J-39500-96Y 96 INCH YELLOW ENVIROGUARD HOSE R134a

J-39500-120B 120 INCH BLUE ENVIROGUARD HOSE R134a

J-39500-120R 120 INCH RED ENVIROGUARD HOSE R134a

J-39599 VACUMASTER VACUUM PUMP Universal

2 stage, 115v, 60hz. 1.2 CFM, 1-1⁄8 HP Motor.

J-39649 VACUMASTER VACUUM PUMP Universal

2 stage, 115v, 60hz,4.0 CFM.

38 Nissan / Infiniti Special Service Tools


Air Conditioning Compressor & Clutch
R134A SYSTEMS
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-39699 R134A CHARGING SCALE

Compact electronic charging scale, operates


on 115v, 60Hz.

J-41810-B R134A PUREGUARD 2 REFRIGERANT MONITOR R134a

Automatically monitors refrigerant supply and


A/C system and protect from damaging effects
of air and other contaminants.

J-43600 ACR 2000 Universal

J-44493 A/C TRACER DYE (24 PAK R134A) Universal

CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 39


Air Conditioning Compressor & Clutch
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-6105 REVERSIBLE RATCHET WRENCH Universal

Hex opening of 1⁄2 inch & 9⁄16 inch and square


⁄16 inch & 1⁄4 inch.
3

J-7624 UNIVERSAL SPANNER WRENCH Universal

CLASSIFICATION
USA CAN
N N
I I

J-8433 HEAVY DUTY PULLER Universal

CLASSIFICATION
USA CAN
N N
I I

J-9392-O1 SHAFT SEAL REMOVER & INSTALLER MJ167, MJS170,


SW123 Compressor
Model
CLASSIFICATION
USA CAN
N N

J-9393-A SHAFT SEAL SEAT REMOVER Universal

CLASSIFICATION
USA CAN
N N
I I

J-22132-O2 ACCESS VALVE CORE REMOVER & Universal


INSTALLER A/C

Designed for 1⁄4 inch valve core type access


valves.

J-23575-B A/C MANIFOLD GAUGE SET (R-12) Universal

Three 72 inch hoses.

40 Nissan / Infiniti Special Service Tools


Air Conditioning Compressor & Clutch
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-24095 A/C COMPRESSOR OIL INJECTOR Universal

J-24182-2A SCHRADER VALVE CORE REMOVER Universal

For R12 and R134a removal and Installation of


smaller sized Schrader valve cores.

J-24364-C VACUUM PUMP (R-12)

6.0 CFM, High Volume, lightweight package.

J-24641-A HEATED DIAL-A-CHARGE CYLINDER

5-lb. Capacity

J-24878-2 CLUTCH HUB NUT REMOVER & INSTALLER MJ167, SW123


Compressors
CLASSIFICATION
USA CAN
N N

J-24878-4 LOCKNUT SPANNER WRENCH MJ167, SW123


Compressors
CLASSIFICATION
USA CAN
N N

J-25472 PILOT-PULLEY REMOVER MJ167, SW123


Compresors
Use with J-26066
CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 41


Air Conditioning Compressor & Clutch
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-26072 SHAFT ROTATOR MJ170, SW123
Compressors

CLASSIFICATION
USA CAN
N N

J-26549-E ORIFICE TUBE REMOVER/EXTRACTOR Universal

For R-12 and R-134a systems

J-29751 LOCKNUT REMOVER

DKV14B, NVR140 Compressors


CLASSIFICATION
USA CAN
N N

J-29884 PULLEY PULLER KIT Universal

J-29890-5 SEAL REMOVER & INSTALLER VR4709 Compressor

CLASSIFICATION
USA CAN
N N

J-33013-B HUB & DRIVE PLATE REMOVER & INSTALLER 240SX

CLASSIFICATION
USA CAN
N N

J-33212 SHAFT SEAL PROTECTOR MJS170 Compressor

CLASSIFICATION
USA CAN
N N

42 Nissan / Infiniti Special Service Tools


Air Conditioning Compressor & Clutch
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-33902 BLIND COVER SET MJ167, MJS170,
MVR140 Compressors

CLASSIFICATION
USA CAN
N N

J-33923 CLUTCH HUB PULLER DKV-14B Compressor

CLASSIFICATION
USA CAN
N N

J-33927 CLUTCH HUB PULLER BOLT NVR140 Compressor

Use with J-33923


CLASSIFICATION
USA CAN
N N

J-33939 CLUTCH PULLEY HOLDER Maxima

CLASSIFICATION
USA CAN
N N

J-34287 A/C TEST HARNESS Automatic


Temperature Control
CLASSIFICATION
USA CAN
N N

J-36843 A/C SERVICE MANUAL

For R-12 vehicles. Includes: System Diagnosis


Chart

J-36846 “FITS ALL” ADAPTER KIT

For R12 Systems. Used to hook up high side of


vehicle air conditioning system. Fits all makes,
all models.

To order Special Service Tools call 1-800-662-2001 43


Air Conditioning Compressor & Clutch
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-36847 FIN STRAIGHTENER

Six fin straighteners in one, will clean and


straighten condensor and evaporator coil fins
having spacings of 8,9,10,12,14,and 15 fins per
inch. Small, compact, easy to use in confined
spaces.

J-38100-3 ACR3 INSTRUCTION MANUAL ACR3

For J-38100 Models

J-38100-10A FILTER DRIER CORES ACR3

Case of 6 filters. Essential for proper filtration


with ACR3 systems. For individual Filter Drier
Core - order J-38100-130.

J-38100-30 REFRIGERANT STORAGE TANK Universal

(30 lb) Refillable Tank

J-38424 A/C COMPRESSOR PULLEY PULLER PILOT Sentra, NX

CLASSIFICATION
USA CAN
N N
I I

J-38550-50B REFRIGERANT STORAGE TANK Universal

50 lb.Refillable Tank

J-38800-B SMART CART Universal

R12 & R134a (34295) Charging Unit.

44 Nissan / Infiniti Special Service Tools


Air Conditioning Compressor & Clutch
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-38873 DRIVE PLATE INSTALLER Sentra, NX

CLASSIFICATION
USA CAN
N N

J-38874 CLUTCH DISC WRENCH Sentra, NX

CLASSIFICATION
USA CAN
N N

J-39072 CLUTCH PLATE HOLDER 240SX, Q45

CLASSIFICATION
USA CAN
N N
I I

J-39475 R-12 A/C TRACER DYE Universal

Box of 24

J-39500-71 ACR4 OIL INJECTION CONVERSION KIT ACR4

Includes three 12 oz. bottles and caps


CLASSIFICATION
USA CAN
N N
I I

J-39500-71N NISSAN ACR4 OIL INJECTION CONVERSION KIT Universal

CLASSIFICATION
USA CAN
N N
I I

J-39627 VALVE CORE REMOVER & INSTALLER

Designed for 1⁄4 inch access fittings with deeper


valve cores.

To order Special Service Tools call 1-800-662-2001 45


Air Conditioning Compressor & Clutch
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-39649 VACUMASTER VACUUM PUMP Universal

2 stage, 115v, 60hz,4.0 CFM.

J-39742 SPRING LOCK COUPLING TOOL Quest

CLASSIFICATION
USA CAN
N N

J-39743 A/C COMPRESSOR SEAL KIT Quest

CLASSIFICATION
USA CAN
N N

J-39772 DUST COVER FOR A/C EQUIPMENT Universal

Dust Cover for ACR3 and ACR4 units.

J-41029 DRIVE PLATE HOLDER NX, Sentra, DKV,


14C, A/C Comp
CLASSIFICATION
USA CAN
N N
I I

J-41995 REFRIGERANT LEAK DETECTOR Universal

Hand-held leak detector, Includes carrying case.

J-43600 ACR 2000 Universal

46 Nissan / Infiniti Special Service Tools


Air Conditioning Compressor & Clutch
GENERAL
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-43926 A/C DYE LEAK DETECTION KIT All R134a A/C Systems

CLASSIFICATION
USA CAN
N N
I I

J-44614 A/C COMPRESSOR CLUTCH WRENCH 2000 Sentra

Used To Hold The Clutch Disc (To Keep The


Compressor Shaft From Rotating) While
CLASSIFICATION
USA CAN Removing And Installing The Compressor Shaft
N N Center Bolt

RB-14401 FIN STRAIGHTENER

Six fin straighteners in one, will clean and


straighten condensor and evaporator coil fins
having spacings of 8,9,10,12,14 and 15 fins per
inch. Small, compact, easy to use in confined
spaces.

To order Special Service Tools call 1-800-662-2001 47


Manual Transmission & Clutch
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-22912-O1 REAR PINION BEARING REMOVER RL3FO1A, RN4F30A,
RS5F30A, RS5F31A, All
Inner Diameter 2.25 inch (Also Included in
CLASSIFICATION J-39856 Puller Set)
USA CAN
N N

J-23907 SEAL AND BUSHING PULLER Universal

⁄2-13 Thread with Clutch Pilot Bearing


1
CLASSIFICATION
USA CAN Puller Adapter
N N
I

J-23907-3 SLIDE HAMMER PULLER LEGS Universal

Use with J-23907


CLASSIFICATION
USA CAN
N N

J-25678-O1 MAINSHAFT BEARING INSTALLER FS5W71B

CLASSIFICATION
USA CAN
N N

J-25679-O1 COUNTER GEAR BEARING INSTALLER FS5W71B

CLASSIFICATION
USA CAN
N N

J-25681 UNIVERSAL BEARING PULLER Universal

Small Inner Diameter 0-1.25 inch


CLASSIFICATION
USA CAN
N N

J-25689-A FORK ROD PIN PUNCH FS5W71B

CLASSIFICATION
USA CAN
N N

48 Nissan / Infiniti Special Service Tools


Manual Transmission & Clutch
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-25691-O1 TRANSMISSION BEARING INSTALLER FS5W71B

CLASSIFICATION
USA CAN
N N

J-25863-O1 HUB/COUNTERSHAFT BEARING INSTALLER FAWF60A, FS5R90A,


FS5W63A, R160, R180,
R200
CLASSIFICATION
USA CAN
N N

J-26348 MAINSHAFT NUT WRENCH FS5W71B

CLASSIFICATION
USA CAN
N N

J-26349-A BEARING REMOVER AND INSTALLER SET FS5W71B

Use with J-25726-B Puller


CLASSIFICATION
USA CAN
N N

J-26366 CLUTCH ALIGNMENT ARBOR L24E, L26, L28,


LD28, VG30, 240Z,
260Z, 280Z, 300Z,
810, Maxima
CLASSIFICATION
USA CAN
N N

J-28804 COUNTERSHAFT NUT WRENCH FSFW60A

CLASSIFICATION
USA CAN
N N

J-28894 EXTENSION HOUSING SEAL INSTALLER FSFW60A

CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 49


Manual Transmission & Clutch
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-29369 BUSHING REMOVAL KIT Universal

Includes pullers for 19mm to 64mm bushings

J-29895 COUNTERSHAFT REAR BEARING INSTALLER FSFW60A

CLASSIFICATION
USA CAN
N N

J-33032 COUNTERSHAFT REAR BEARING FS5R90A


ASSEMBLY TOOL
CLASSIFICATION
USA CAN
N N

J-33163-1 VALVE BODY PARTS TRAY Universal

Designed to keep various parts of the valve


body separated in an orderly manner during
disassembly procedure.

J-33163-2 UNIVERSAL PARTS TRAY Universal

Designed to keep the various parts of the valve


body seperated in an orderly manner during
disassembly procedure.

J-33213 CLUTCH ALIGNMENT ARBOR Sentra, Pulsar, 200SX,


Stanza, 310, 240SX,
Altima
CLASSIFICATION
USA CAN
N N

J-34305 SHIFT FORK SNAP RING REMOVER & INSTALLER RS5F50A

CLASSIFICATION
USA CAN
N N

50 Nissan / Infiniti Special Service Tools


Manual Transmission & Clutch
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-34328 MAINSHAFT INSTALLER FS5R30A

CLASSIFICATION
USA CAN
N N

J-34331 MAINSHAFT BEARING INSTALLER FS5R30A

CLASSIFICATION
USA CAN
N N

J-34332 GEAR & BUSHING INSTALLER FS5R30A

CLASSIFICATION
USA CAN
N N

J-34335 5TH & REVERSE HUB INSTALLER FS5R30A

CLASSIFICATION
USA CAN
N N

J-34339 OIL SEAL INSTALLER Truck Transfer Case

CLASSIFICATION
USA CAN
N N

J-34342 SUPPORT SLEEVE FS5R30A

CLASSIFICATION
USA CAN
N N

J-36267 REVERSE GEAR SLEEVE INSTALLER Truck, Stanza Wagon

CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 51


Manual Transmission & Clutch
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-36850 TRANSJEL LUBRICANT Universal

Used for both Automatic & Manual Transmission.


(1lb. tub)

J-39027 PRE-LOAD ADAPTER RS5F32V

Use with J-34291-A


CLASSIFICATION
USA CAN
N N
I I

J-39856 GEAR PULLER SET 300ZX, Truck,


Pathfinder
CLASSIFICATION
USA CAN
N N

OF-2533 BEARING REMOVER & SEPARATOR Small Bearings,


Universal
Range 0-2.25 inch
CLASSIFICATION
USA CAN
N N

52 Nissan / Infiniti Special Service Tools


Automatic Transmission
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-25721-A SLIDE HAMMER ADAPTERS

1 Pair
CLASSIFICATION
USA CAN
N N
I I

J-26744-A SEAL INSTALLER Universal

.015 inch and .031 wire ends

J-29369 BUSHING REMOVAL KIT Universal

Includes pullers for 19mm to 64mm bushings

J-33163-1 VALVE BODY PARTS TRAY Universal

Designed to keep various parts of the valve


body separated in an orderly manner during
disassembly procedure.

J-33163-2 UNIVERSAL PARTS TRAY Universal

Designed to keep the various parts of the valve


body seperated in an orderly manner during
disassembly procedure.

J-34262 7MM SQUARE SOCKET/DRAIN PLUG SOCKET Universal

CLASSIFICATION
USA CAN
N N

J-34270 TRANSMISSION CABLE HARNESS 300ZX, Truck

CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 53


Automatic Transmission
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-34301-ADPT A/T PRESSURE GAUGE ADAPTER KIT Automatic
Transmission

CLASSIFICATION
USA CAN
N

J-34301-C AUTOMATIC TRANSMISSION OIL Universal


PRESSURE GAUGE KIT
CLASSIFICATION
USA CAN
N N
I I

J-34308 TRANSMISSION HOLDING FIXTURE All Rear Wheel Drive

Use with J-3289-20


CLASSIFICATION
USA CAN
N N

J-36850 TRANSJEL LUBRICANT Universal

Used for both Automatic & Manual


Transmission. (1lb. tub)

J-37066 FRONT SEAL INSTALLER RE4R01A

CLASSIFICATION
USA CAN
N N

J-37067 REAR SEAL INSTALLER RE4R01A

CLASSIFICATION
USA CAN
N N

J-37068 TRANSMISSION HOLDING FIXTURE RE4R01A

Use with J-3289-20


CLASSIFICATION
USA CAN
N N

54 Nissan / Infiniti Special Service Tools


Automatic Transmission
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-37296 TRANSMISSION JACK ADAPTER ‘87 & Up Truck/
Pathfinder & Other
(Same as GP8610) Large Transmissions
CLASSIFICATION
USA CAN
N N
I I

J-37296-1 TRANSMISSION JACK ADAPTER ‘87 (4x4) Truck,


Pathfinder
Use with J-37296, Same as GP8601

J-37296-2 TRANSMISSION JACK ADAPTER ‘88 (4x4) Truck,


Pathfinder
(Same as GP8602)
CLASSIFICATION
USA CAN
N N

J-38981 CLUTCH SPRING COMPRESSOR ADAPTER KIT RL4F03A, RL4F03V

Use with J-34285-A


CLASSIFICATION
USA CAN
N N
I I

J-38982 OUTPUT SHAFT SEAL INSTALLER RL4F03A, RL4F03V

CLASSIFICATION
USA CAN
N N
I I

J-39026 PRE-LOAD ADAPTER RL4F03A

Use with J-34291-A


CLASSIFICATION
USA CAN
N N
I I

J-39027 PRE-LOAD ADAPTER RS5F32V

Use with J-34291-A


CLASSIFICATION
USA CAN
N N
I I

To order Special Service Tools call 1-800-662-2001 55


Automatic Transmission
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-39186 CLUTCH SPRING COMPRESSOR KIT RL4F03A, RL4F03V

CLASSIFICATION
USA CAN
N N
I I

J-42458 INDICATOR SWITCH SOCKET Infiniti 97 Q45,


& 97QX4
CLASSIFICATION
USA CAN
I I

56 Nissan / Infiniti Special Service Tools


Transaxle
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-33067 WHEEL BEARING PACKER Universal

Designed to pack up to 65 tapered roller


bearings with one filling.

J-33201-A DIFFERENTIAL PRELOAD WRENCH Pulsar 83-87,


Sentra 83-90, 94, 99,
Stanza 83-86
CLASSIFICATION
USA CAN
N N

J-33202 BEARING RETAINER WRENCH All Manual


Transmissions and
Transaxles
CLASSIFICATION
USA CAN
N N
I I

J-33904 DIFFERENTIAL OIL SEAL PROTECTOR 1983 Transaxle

CLASSIFICATION
USA CAN
N N

J-34279 TRANSAXLE HOLDING FIXTURE All Auto Transaxles

Use with J-3289-20


CLASSIFICATION
USA CAN
N N
I I

J-34282 OIL PRESSURE GAUGE ADAPTER All Auto Transaxles

Use with J-34301-C


CLASSIFICATION
USA CAN
N N

J-34284 PRE-LOAD ADAPTER WRENCH RL4F02A, RS3F50A

CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 57


Transaxle
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-34285-A CLUTCH SPRING COMPRESSOR All Auto Transaxles

CLASSIFICATION
USA CAN
N N
I I

J-34286 BEARING RACE PULLER All Transmissions


and Transaxles
CLASSIFICATION
USA CAN
N N
I I

J-34291-B SHIM SELECTING GAUGE All Transmissions


and Transaxles
CLASSIFICATION
USA CAN
N N
I I

J-34296-1 OIL SEAL PROTECTOR - LEFT SIDE RL4F02A

CLASSIFICATION
USA CAN
N N

J-34297-1 OIL SEAL PROTECTOR - RIGHT SIDE RL4F02A

CLASSIFICATION
USA CAN
N N

J-34298 OIL PRESSURE GAUGE ADAPTER RL4F02A

Use with J-34301-C


CLASSIFICATION
USA CAN
N N

J-39713 PRE-LOAD ADAPTER Altima, Quest

CLASSIFICATION
USA CAN
N N

58 Nissan / Infiniti Special Service Tools


Transaxle
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-39883 PRE-LOAD ADAPTER Altima, Maxima

CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 59


Transfer Case
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-34286-10 PULLER LEGS Stanza Wagon

Use with J-34286


CLASSIFICATION
USA CAN
N N

J-35864 SHIFT SHAFT OIL SEAL INSTALLER Stanza Wagon

J-35865 CASE HOLDING FIXTURE Stanza Wagon

Use with J-3289-20


CLASSIFICATION
USA CAN
N N

J-35866 ADAPTER OIL SEAL INSTALLER Stanza Wagon

CLASSIFICATION
USA CAN
N N

J-35867 DRIVE SHAFT SEAL INSTALLER Stanza Wagon

CLASSIFICATION
USA CAN
N N

J-35868 FRONT PINION OUTER RACE & Stanza Wagon


DRIVE GEAR BRG INSTALLER
CLASSIFICATION
USA CAN
N N

J-35869 COUNTERSHAFT BEARING OUTER RACE Stanza Wagon

CLASSIFICATION
USA CAN
N N

60 Nissan / Infiniti Special Service Tools


Transfer Case
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-35870 FRONT CRANK/RING GEAR OIL SEAL INSTALLER Q45

CLASSIFICATION
USA CAN
N N

J-35871 COUNTERSHAFT BEARING INNER Stanza Wagon


RACE INSTALLER
CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 61


Steering & Brakes
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-7624 UNIVERSAL SPANNER WRENCH Universal

J-8049 BRAKE SPRING REMOVER & INSTALLER Universal w/Drum


Brakes

J-21177-A DRUM TO BRAKE SHOE CLEARANCE GAUGE Universal w/Drum


Brakes
41⁄2 inch to 127⁄8 inch range

J-21472 BRAKE BLEEDER WRENCH Universal

⁄16 inch & 3⁄8 inch


5

J-23518-O1 BRAKE BLEEDER ADAPTER Universal

J-23530-A BRAKE LINE FLARING TOOL (SINGLE & DOUBLE) Universal

45 degree single and double flare.

J-23770 DISC BRAKE COMBINATION VALVE Universal


PIN DEPRESSOR

For disc brakes

62 Nissan / Infiniti Special Service Tools


Steering & Brakes
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-24319-B STEERING LINKAGE PULLER Universal

CLASSIFICATION
USA CAN
N N
I

J-25310 UNIVERSAL TUBE BENDER Universal

Makes smooth short radius bends up to


180 degrees, 3⁄16 inch thru 3⁄8 inch.

J-25726-B STEERING WHEEL PULLER Universal

CLASSIFICATION
USA CAN
N N
I I

J-26357 POWER STEERING PRESSURE GAUGE IPRB56L. IPRP15L,


PB48S, PR255A
CLASSIFICATION
USA CAN
N N

J-26357-10 POWER STEERING PRESSURE TEST HOSE IPRP15L, PB48S

Use with J-26357


CLASSIFICATION
USA CAN
N N

J-26364 STEERING GEAR TORQUE SOCKET Universal

CLASSIFICATION
USA CAN
N N
I I

J-26367 POWER STEERING GEAR SEAL & IPRB56L, PB48S


BEARING INSTALLER
CLASSIFICATION
USA CAN Use with J-26090
N N

To order Special Service Tools call 1-800-662-2001 63


Steering & Brakes
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-26369 BEARING DUMMY SHAFT PB48S

J-28434 WHEEL CYLINDER BLEEDER WRENCH Universal

⁄16 inch hex


5

J-28527 PINION SEAL INSTALLER IPRP15L

CLASSIFICATION
USA CAN
N N

J-28662 BRAKE PEDAL EFFORT GAUGE Universal

This precision instrument enables the technician


to accurately measure brake pedal effort when
diagnosing brake travel and other related
problems.

J-28815 FRONT HUB NUT SOCKET 720 4X4 Truck


up to 1984
CLASSIFICATION
USA CAN
N N

J-28817 STEERING GEAR HOLDING FIXTURE All Rack & Pinion

Use with J-28817-6


CLASSIFICATION
USA CAN
N N

J-28817-6 RACK & PINION CLAMP BRACKET All Rack & Pinion

Use with J-28817


CLASSIFICATION
USA CAN
N N

64 Nissan / Infiniti Special Service Tools


Steering & Brakes
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-28818 REAR COVER LOCKNUT WRENCH IPRP15L

CLASSIFICATION
USA CAN
N N

J-28819 REAR COVER WRENCH IPRP15L

CLASSIFICATION
USA CAN
N N

J-28820 CYLINDER LOCKNUT SPANNER PR25SA, IPRP15L

CLASSIFICATION
USA CAN
N N

J-28821 RACK AND PINION CYLINDER HOLDER All Power Rack


& Pinion
CLASSIFICATION
USA CAN
N N

J-28822 CYLINDER END COVER WRENCH All Power Rack


and Pinion
CLASSIFICATION
USA CAN
N N

J-28895 FRONT HUB SEAL INSTALLER All Except FWD

CLASSIFICATION
USA CAN
N N

J-29532 DIAPHRAGM TYPE PRESSURE BRAKE BLEEDER Universal

Features a 21⁄2-gallon capacity, tool tray and


complete operating instructions. Includes
1
⁄8 inch male quick connect fitting and 1⁄8 inch
to 1⁄4 inch pipe thread adapter.

To order Special Service Tools call 1-800-662-2001 65


Steering & Brakes
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-33914 POWER STEERING PRESSURE GAUGE ADAPTER IPRP15L, PR25SA

Use with J-26357


CLASSIFICATION
USA CAN
N N

J-34263 RACK OIL SEAL INSTALLER 1984-Sentra

CLASSIFICATION
USA CAN
N N

J-34264 RACK OIL SEAL INSTALLER 1984-300ZX

CLASSIFICATION
USA CAN
N N

J-35622 VACUUM BRAKE BLEEDER Universal

CLASSIFICATION
USA CAN
N N
I I

J-35995 CYLINDER LOCKNUT SPANNER WRENCH Rack & Pinion


240SX, Maxima
CLASSIFICATION
USA CAN
N N

J-36355 BRAKE CALIPER SOCKET All 1979 to Current


with Rear Disc Brakes
CLASSIFICATION
USA CAN
N N
I I

J-39603 STEERING LOCK NUT SPANNER WRENCH Sentra

CLASSIFICATION
USA CAN
N N

66 Nissan / Infiniti Special Service Tools


Steering & Brakes
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-41777 STEERING WHEEL PULLER 96 Quest

CLASSIFICATION
USA CAN
N N

J-42931 BRAKE LOAD SENSING VALVE Infiniti, QX4,


ADJUSTING TOOL Pathfinder
CLASSIFICATION
USA CAN
N N

J-43477 POWER STEERING LOCK NUT WRENCH I30, Maxima, Q45, G20

Used To Loosen Steering Rack Sliding Force


CLASSIFICATION
USA CAN Adjustment Screw Lock Nut
N N
I I

J-43687 STEERING RACK CENTER ADJUST NUT WRENCH I30, Maxima, Q45, G20

Used To Adjust Steering Rack Sliding Force


CLASSIFICATION
USA CAN
N N
I I

J-43995 STEERING LOCKNUT WRENCH 1996~Pathfinder,


1996~Qx4
CLASSIFICATION
USA CAN
N
I

J-43996 STEERING RACK ADJUSTMENT WRENCH 1996~Pathfinder,


1996~Qx4
CLASSIFICATION
USA CAN
N
I

J-44183-A 20-100 LB. PULL GAUGE Universal

CLASSIFICATION
USA CAN
N
I

To order Special Service Tools call 1-800-662-2001 67


Steering & Brakes
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-44372 5-60LB. PULL GAUGE Universal

CLASSIFICATION
USA CAN
N
I

J-44946 STEERING RACK HEX TOOL Altima

Used To Adjust Steering Rack Sliding Force


CLASSIFICATION
USA CAN
N N

J-45033 STEERING RACK LOCK NUT TOOL Altima

Used To Loosen Steering Rack Sliding Force


CLASSIFICATION
USA CAN Adjustment Screw Lock Nut
N N

J-45212 CROWS FOOT WRENCH (17MM) 1999-2000 Quest

Used To Torque The Lower Rack Bolt On


CLASSIFICATION
USA CAN Passenger Side.
N N

J-45218 INNER TIE ROD WRENCH (32MM) Altima, Maxima, I30

CLASSIFICATION
USA CAN
N N
I I

J-45219 INNER TIE ROD WRENCH (34MM) Quest

CLASSIFICATION
USA CAN
N N

J-45377 INNER TIE ROD WRENCH (30MM) G20, Q45

CLASSIFICATION
USA CAN
N N

68 Nissan / Infiniti Special Service Tools


Steering & Brakes
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-45378 INNER TIE ROD WRENCH (36MM) Pathfinder, Qx4

CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 69


Suspension & Body
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
7208 SPINDLE REMOVER Universal

J-3289-20 STRUT COMPRESSOR HOLDING FIXTURE Universal

Bench Mount. Used with Applicable Holding


CLASSIFICATION
USA CAN Fixtures.
N N
I I

J-6627-A WHEEL STUD/BALL JOINT REMOVER Universal

CLASSIFICATION
USA CAN
N N
I I

J-8433 HEAVY DUTY PULLER Universal

CLASSIFICATION
USA CAN
N N
I I

J-8943-O1 SPOT WELD CUTTING TOOL Universal

Includes 3 Extra Blades. For Replacement


Blades (6) Order J-8967.

J-23498-A DRIVESHAFT INCLINOMETER Universal

J-24319-B TIE ROD PULLER Universal

Used To Remove Outer Tie Rod


CLASSIFICATION
USA CAN
N N
I

70 Nissan / Infiniti Special Service Tools


Suspension & Body
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-24402-A GLASS SEALANT (COLD KNIFE) REMOVER Universal

For Replacement Teflon Blade, order J-24402-5.

J-24709-O1 GLASS SEALANT URETHANE REMOVER Universal

For Replacement Blades (package of 3), order


J-24709-4. Designed to Reach an Operating
Temperature of 700 Degrees F.

J-25070 HEAT GUN Universal

500 - 700 Degrees Farhenheit

J-25300-202 COMPOSITE HEADLIGHT AIMER ADAPTER Universal

Large Pad Pattern. Included with J-25300-D.

J-25300-203 COMPOSITE HEADLIGHT AIMER ADAPTER Universal

Small Pad Pattern. Included with J-25300-D.

J-25300-204 HEADLIGHT AIMER ADAPTER Universal

This Adapter is Optional - Not Included with


J-25300-D. Used on 92mm x 150mm Headlights

J-25300-D HEADLIGHT AIMER (MECHANICAL TYPE) Universal

Proper Mechanical Aiming of Round and


Rectangular Headlights. Includes J-25300-202
& J-25300-203.

To order Special Service Tools call 1-800-662-2001 71


Suspension & Body
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-25730-B BALL JOINT REMOVER Universal

CLASSIFICATION
USA CAN
N N

J-25825-A STRUT GLAND PACKING WRENCH Stanza, 240SX, 280ZX,


Maxima
CLASSIFICATION
USA CAN
N N

J-26083 STRUT GLAND PACKING WRENCH 200SX, 300ZX, Z31

CLASSIFICATION
USA CAN
N N

J-26363-B SUSPENSION BUSHING SET Universal

CLASSIFICATION
USA CAN
N N

J-29107-A PITMAN ARM PULLER Universal

J-33067 WHEEL BEARING PACKER Universal

Designed to pack up to 65 tapered roller


bearings with one filling.

J-35917 BALL JOINT REMOVER Universal

1.70 inch opening in base.


CLASSIFICATION
USA CAN
N N
I I

72 Nissan / Infiniti Special Service Tools


Suspension & Body
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-36796 “CLIP ZIP” CLIP REMOVAL TOOL Universal

J-38198 REAR BUSHING REMOVER & INSTALLER 300ZX, 240SX, Q45,


G20
CLASSIFICATION
USA CAN
N N
I I

J-38563 TRIM PAD REMOVAL TOOL Q45

For rear parcel shelf.


CLASSIFICATION
USA CAN
I I

J-39071 FILLER CAP ADAPTER Q45 Full Active


Suspension
CLASSIFICATION
USA CAN
I I

J-39528 FAS PRESSURE GAUGE Q45 Full Active


Suspension
CLASSIFICATION
USA CAN
I I

J-39544-KIT COMPLETE TORQUE SOCKET KIT (10PCS) Universal

Kit includes 101⁄2 inch drive torque sockets and


storage case.

J-41306 HICAS SPACER 300ZX

CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 73


Suspension & Body
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-41616 REAR VIEW MIRROR REMOVAL TOOL Quest

CLASSIFICATION
USA CAN
N N

J-42047 ANTENNA BEZEL SOCKET Altima, Maxima,


Truck, Pathfinder,
240SX, Sentra,
CLASSIFICATION
USA CAN 200SX, NX, Axxess,
N N J30, I30, G20, Q45
I I

J-42625-280 WHEEL BALANCER ADAPTER KIT Universal

28mm base
CLASSIFICATION
USA CAN
N N

J-42625-300 WHEEL BALANCER BASE ADAPTER KIT Universal

30mm
CLASSIFICATION
USA CAN
N N

J-42625-360 WHEEL BALANCER BASE ADAPTER KIT Universal

36mm
CLASSIFICATION
USA CAN
N N

J-42625-400 WHEEL BALANCER BASE ADAPTER KIT Universal

40mm
CLASSIFICATION
USA CAN
N N

J-42625-SHFT837 WHEEL BALANCER SHAFT ADAPTER KIT

BEAR 80-200, 30mm


CLASSIFICATION
USA CAN
N N

74 Nissan / Infiniti Special Service Tools


Suspension & Body
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-42625-SHFT937 WHEEL BALANCER SHAFT ADAPTER KIT

For Coats, 28mm


CLASSIFICATION
USA CAN
N N

J-42625-SHFT947 WHEEL BALANCER SHAFT ADAPTER KIT

For Sun/1742/1762 Nortron, 28mm


CLASSIFICATION
USA CAN
N N

J-42956 STRUT SHAFT CLAMP Pathfinder, QX4

CLASSIFICATION
USA CAN
N N
I I

J-43415 PLASTIC RIVET REMOVER 1995-98 Sentra

CLASSIFICATION
USA CAN
N N

J-43980 SQUEAK & RATTLE REPAIR KIT Universal

CLASSIFICATION
USA CAN
N N
I I

J-45679 HYDRAULIC ASSIST RIVET GUN Frontier

For fender flares.

To order Special Service Tools call 1-800-662-2001 75


Differential & Axle
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
7208 SPINDLE REMOVER Universal

J-3289-20 STRUT COMPRESSOR HOLDING FIXTURE Universal

Bench Mount. Used with Applicable Holding


CLASSIFICATION
USA CAN Fixtures.
N N
I I

J-8001-M METRIC DIAL INDICATOR SET Universal

Same as J-8001 with Metric (.01mm graduations


CLASSIFICATION
USA CAN and 5mm travel).
N N
I I

J-8107-2 SIDE BEARING PULLER PILOT Universal

Use with J-22888-D


CLASSIFICATION
USA CAN
N N
I I

J-8433 HEAVY DUTY PULLER Universal

CLASSIFICATION
USA CAN
N N
I I

J-22888-20A SIDE BEARING PULLER

Reversible Legs Universal


CLASSIFICATION
USA CAN
N N
I I

J-22888-D UNIVERSAL REVERSIBLE LEG PULLER Universal

Includes: J-22888-9, J-22888-20A, and J-22888-30.

76 Nissan / Infiniti Special Service Tools


Differential & Axle
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-22912-O1 REAR PINION BEARING REMOVER RL3FO1A, RN4F30A,
RS5F30A, RS5F31A, All
Inner Diameter 2.25 inch (Also Included in
CLASSIFICATION J-39856 Puller Set)
USA CAN
N N

J-23498-A DRIVESHAFT INCLINOMETER Universal

J-25267 SHIM INSTALLER R200

J-25273 PINION OIL SEAL INSTALLER R200

J-25523 SIDE BEARING INSTALLER R200

CLASSIFICATION
USA CAN
N N

J-25604-O1 AXLE SHAFT REMOVER/DIFFERENTIAL R Series Differential


HOLDING FIXTURE Holder Truck Axle
Remover
CLASSIFICATION
USA CAN
N N

J-25749-A PILOT BEARING & PINION BEARING All R Series


RACE INSTALLER Differential
CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 77


Differential & Axle
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-25765-B PINION PRE-LOAD GAUGE Universal

CLASSIFICATION
USA CAN
N N
I I

J-25774-A PINION & AXLE SHAFT FLANGE WRENCH H145-150, R160

CLASSIFICATION
USA CAN
N N

J-25803-O1 SIDE BEARING INSTALLER 720 4X4, H165A,


H165B
CLASSIFICATION
USA CAN
N N

J-25863-O1 HUB/COUNTERSHAFT BEARING INSTALLER FAWF60A, FS5R90A,


FS5W63A, R160, R180,
R200
CLASSIFICATION
USA CAN
N N

J-26010-O1 BEARING INSTALLER R160, R180, H190

CLASSIFICATION
USA CAN
N N

J-26082 SIDE BEARING & SIDE FLANGE SEAL INSTALLER F10 Early 310

CLASSIFICATION
USA CAN
N N

J-26089 FRONT HUB BEARING & OUTER All Front Wheel Drive
RACE INSTALLER Passenger Vehicles
CLASSIFICATION
USA CAN
N N

78 Nissan / Infiniti Special Service Tools


Differential & Axle
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-26090 UNIVERSAL DRIVER HANDLE Universal

Use with Applicable Adapter.


CLASSIFICATION
USA CAN
N N
I I

J-26091 KNUCKLE & HUB SEAL INSTALLER Front-Wheel Drive


Passenger Vehicles
CLASSIFICATION
USA CAN
N N

J-26092 FRONT HUB BEARING INSTALLER Front-Wheel Drive


Passenger Vehicles
CLASSIFICATION
USA CAN
N N

J-26335 DIFFERENTIAL FILLER PLUG WRENCH R160, R180, R200

CLASSIFICATION
USA CAN
N N

J-28815 FRONT HUB NUT SOCKET 720 4X4 Truck


up to 1984
CLASSIFICATION
USA CAN
N N

J-29107-A PITMAN ARM PULLER Universal

J-33928 AUTO LOCKING FRONT HUB GAUGE 720 4X4 Front Axle
up to 1984
CLASSIFICATION
USA CAN
N N

To order Special Service Tools call 1-800-662-2001 79


Differential & Axle
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-34311 PINION FLANGE WRENCH H233B, R180A, R200A

CLASSIFICATION
USA CAN
N N

J-34312 SIDE BEARING LOCKNUT WRENCH H233B

CLASSIFICATION
USA CAN
N N

J-39351 SIDE OIL SEAL PROTECTOR 300ZX (R230)

CLASSIFICATION
USA CAN
N N
I I

J-39352 SIDE OIL SEAL PROTECTOR Q45, 300ZX (R200V)

CLASSIFICATION
USA CAN
N N
I I

J-39353 SIDE OIL SEAL PROTECTOR 240SX (R180)

CLASSIFICATION
USA CAN
N N
I I

J-39544-KIT COMPLETE TORQUE SOCKET KIT (10PCS) Universal

Kit includes 101⁄2 inch drive torque sockets


and storage case.

J-42625-SHFT837 WHEEL BALANCER SHAFT ADAPTER KIT

BEAR 80-200, 30mm


CLASSIFICATION
USA CAN
N N

80 Nissan / Infiniti Special Service Tools


Differential & Axle
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-42625-SHFT937 WHEEL BALANCER SHAFT ADAPTER KIT

For Coats, 28mm


CLASSIFICATION
USA CAN
N N

J-42625-SHFT947 WHEEL BALANCER SHAFT ADAPTER KIT

For Sun/1742/1762 Nortron, 28mm


CLASSIFICATION
USA CAN
N N

J-45073 REAR AXLE BEARING REMOVER Pathfinder, QX4,


Truck, Xterra,
Includes Bearing Locknut Socket Frontier
CLASSIFICATION
USA CAN
N N
I

To order Special Service Tools call 1-800-662-2001 81


Supplemental Restraint System
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
6147 TAMPER-RESISTANT TORX BIT (T30) Universal

J-38219 TAMPER RESISTANT TORX BIT (T50) All Airbags

CLASSIFICATION
USA CAN
N N
I I

J-38381-35 DEPLOYMENT ADAPTER, SIDE AIR BAGS Sentra, Altima

CLASSIFICATION
USA CAN
N N

J-38381-50 DEPLOYMENT ADAPTER, PRE-TENSIONER 2000 Sentra

CLASSIFICATION
USA CAN
N N

J-38381-65 DEPLOYMENT ADAPTER, PASSENGER AIR BAG 2001 Maxima, I30

CLASSIFICATION
USA CAN
N N
I I

J-38381-70 DEPLOYMENT ADAPTER, DRIVER AIR BAG 2001 Maxima, I30

CLASSIFICATION
USA CAN
N N
I I

J-44230 SEAT BELT PRE-TENSIONER DEPLOYMENT Maxima, I30


HARNESS ADAPTER
CLASSIFICATION
USA CAN Add This Seat Belt Pre-Tensioner To Existing
N N Air Bag Deployment Kit (J-38381-Kit)
I I

82 Nissan / Infiniti Special Service Tools


Supplemental Restraint System
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-44615 AIR BAG MASTER KEY SET 2000 Maxima, Sentra,
2000 I30
The Air Bag Master Key Set Is Required To
Remove The Accessory Air Bag Locking Bolt
(P/N 999l2-Al000) On The Models Listed Above.
CLASSIFICATION
USA CAN Note: This Master Key Set Is A Security Item
N N For Nissan Dealership Use Only
I I

To order Special Service Tools call 1-800-662-2001 83


Tool Organizational Systems
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-34100 GREAT CRATE I STORAGE BOX Universal

Meaures 211⁄2 inch x 151⁄2 inch x 93⁄4 inch.


Molded in blue polyethylene with storage
capacity of 1.4 cu. ft.

J-34300-I97ND INFINITI TOOL BOARD ORGANIZATION SYSTEM Tool Storage

New Dealer Set Up (Metal Boards & Hooks)


CLASSIFICATION
USA CAN
I I

J-34300-I97RK INFINITI RACK & CASES Tool Storage

CLASSIFICATION
USA CAN
I I

J-34300-I97TBF INFINITI METAL BOARDS & HINGED FRAMES Tool Storage

CLASSIFICATION
USA CAN
I I

J-34300-N97ND NISSAN TOOLBOARD ORGANIZATION SYSTEM Tool Storage

New Dealer Set Up (Boards & Hooks)


CLASSIFICATION
USA CAN
N N

J-34300-N97RK NISSAN RACK & CASES Tool Storage

CLASSIFICATION
USA CAN
N N

J-34300-N97TBF NISSAN METAL BOARDS & HINGED FRAMES Tool Storage

CLASSIFICATION
USA CAN
N N

84 Nissan / Infiniti Special Service Tools


Tool Organizational Systems
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-34700-10 GREAT CRATE DOLLY Universal

Use with J-34755 Great Crate, Heavy Steel


Construction, Rugged 3 inch Caster Wheels.

J-34755 GREAT CRATE I & RACK STORAGE SYSTEM Universal

Includes 12 Great Crate I storage boxes (J-34100)


and 1 Storage Rack (J-34700). Rack measures
351⁄6 inch wide, 69 inch high, and 21 inch deep.

J-35550 STORAGE CASE SET Universal

Set of 3 Universal Cases, 1-17 inch x 13 inch x


41⁄2 inch, 1-14 inch x 11 inch x 41⁄2 inch,
1-12 1⁄2 inch x 9 inch x 3 inch.

J-35805 GREAT CRATE II STORAGE BOX

Measures 27 inch x 17 inch x 121⁄2 inch.


2.4 cu. ft.

J-35810 GREAT CRATE II & RACK STORAGE SYSTEM Universal

Includes 8 Great Crate II storage boxes (J-35805)


and 1 Storage Rack (J-35806). Rack measures
381⁄2 inch wide, 54 inch high, and 271⁄2 inch deep.

J-41155 VHS TAPE TOWER Universal

Holds up to 32 VHS tapes. Tower stands 64 inch


tall. Made in U.S.A.

J-41257 GREAT CRATE III Universal

Measures 271⁄2 inch x 201⁄2 inch x 15 inch


4.2 cu. ft.

To order Special Service Tools call 1-800-662-2001 85


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
6143 TAMPER-RESISTANT TORX BIT (T20) Universal

6147 TAMPER-RESISTANT TORX BIT (T30) Universal

7379 TORQUE WRENCH Universal

3
⁄4 inch Drive, 153 to 830 Newton Meters,
100 to 600 ft. lbs. Range (Dual Scale)

8003 SLIDE HAMMER ADAPTER Universal

Female Thread 5⁄8 inch - 18,


Male Thread 7⁄16 inch - 20

8005 SLIDE HAMMER ADAPTER Universal

Female Thread 5⁄8 inch-18,


Male Thread 3⁄8 inch-16

8006 SLIDE HAMMER ADAPTER Universal

Female Thread 5⁄8 inch - 18,


Male Thread 1⁄2 inch - 20

8007 SLIDE HAMMER ADAPTER Universal

Female Thread 5⁄8 inch-18,


Male Thread 1⁄2 inch-13

86 Nissan / Infiniti Special Service Tools


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
8008 SLIDE HAMMER ADAPTER Universal

Female Thread 5⁄8 inch - 18,


Male Thread 9⁄16 inch - 18

8010 SLIDE HAMMER ADAPTER Universal

Female Thread 5⁄8 inch - 18,


Male Thread 9⁄16 inch-18

8013 SLIDE HAMMER ADAPTER Universal

Female Thread 5⁄18 inch - 18,


Male Thread 3⁄4 inch - 16

8015 SLIDE HAMMER ADAPTER Universal

Female Thread 5⁄8 inch - 18,


Male Thread 3⁄4 inch - 10

8017 SLIDE HAMMER ADAPTER Universal

Female Thread 5⁄8 inch - 18,


Male Thread 7⁄8 inch-14

8018 SLIDE HAMMER ADAPTER Universal

Female Thread 5⁄8 inch - 18,


Male Thread 7⁄8 inch - 9

8022 SLIDE HAMMER ADAPTER Universal

Female Thread 5⁄8 inch - 18,


Male Thread 1⁄2 Pipe

To order Special Service Tools call 1-800-662-2001 87


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
21166-INF TEN POSITION KEY CUTTER Q45, QX4

CLASSIFICATION
USA CAN
I I

J-544-O1 TENSION SCALE (0-4 LBS) Universal

Range 0-4 lbs.

J-1313-B BEAM STYLE TORQUE WRENCH Universal

⁄2 inch drive, 0 to 250 Newton Meters,


1

0 to 150 ft. lbs. Range (Dual Scale)

J-1859-A STEERING WHEEL PULLER Universal

Includes 5 sets of side screws

J-2619-O1 SLIDE HAMMER WITH ADAPTER Universal

⁄8 inch-18 Thread with 1⁄2-13 Adapter


5

J-3172 FEELER GAUGE SET, (.0015 INCH - .015 INCH) Universal

15 Leaves, .0015 inch - .015 inch, .001 Increments

J-4245 INTERNAL SNAP RING PLIERS Universal

Tip Diameter .070 inch, Straight tip

88 Nissan / Infiniti Special Service Tools


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-4646 INTERNAL SNAP RING PLIERS Universal

Tip Diameter .090 inch, Straight Tip Spring


Action, Adjustable Stop.

J-4757 MICROMETER DIAL INDICATOR PLUNGER Universal


BALL ATTACHMENT

J-4880 EXTERNAL SNAP RING PLIERS Universal

Tip Diameter .038 inch, Straight Tip.

J-5207 INTERNAL SNAP RING PLIER Universal

Tip Diameter .090 inch, Straight Tip.

J-5403 INTERNAL SNAP RING PLIER Universal

Tip Diameter .038 inch, Straight Tip.

J-5586-A SNAP RING PLIERS VACUUM GRIP Universal

Tip 0.125 inch wide 1⁄8 inch x 1.0 inch opening

J-5853-C BEAM STYLE TORQUE WRENCH Universal

⁄8 inch drive, 0 to 68 Newton Meters,


3

0 to 600 in. lbs. Range (Dual Scale)

To order Special Service Tools call 1-800-662-2001 89


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-6083 EXTERNAL SNAP RING PLIERS Universal

Tip Diameter .070 inch, Straight Tip.

J-6125-1B SLIDE HAMMER Universal

⁄8-16 Thread with 5⁄16 inch-18 adapter, Set of 2.


3

J-6125-B SLIDE HAMMERS Universal

⁄8-16 Thread with 5⁄16 inch-18 Adapter (Set of 2)


3

J-6435 EXTERNAL SNAP RING PLIERS Universal

Tip Diameter .115 inch, Straight Tip.

J-6471-O2 SLIDE HAMMER WITH ADAPTERS Universal

5
⁄16 -18 Thread with Adapters 3⁄8-16, 3⁄8-24,
3
⁄4 -10, 3⁄4 -16, 1-14, 1⁄2-13, 7⁄16-20, 9⁄16 -18,
5
⁄8 -11, 7⁄8-14, 7⁄8-9, 1⁄2 pipe & 1⁄4 pipe

J-7057 DIAL INDICATOR EXTENSION Universal

21⁄2 inch Long. Use with J-8001 & J-8001-M.

J-7079-2 UNIVERSAL DRIVER HANDLE Universal

8 inch long 1⁄2 inch pilot, for non-threaded


driver heads.

90 Nissan / Infiniti Special Service Tools


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-7108 SLIDE HAMMER ASSEMBLY Universal

⁄8 inch-11 Thread
5

J-7754-C BEAM STYLE TORQUE WRENCH Universal

⁄8 inch drive, 0 to 3 Newton Meters,


3

0 to 25 in. lbs. Range (Dual Scale)

J-7872 MAGNETIC BASE DIAL INDICATOR Universal

Includes J-8001 and 3 inch plunger extension.

J-8001 DIAL INDICATOR SET Universal

Set includes: Clamp Sleeve, indicator & hole


attatchment. Features .001 inch increments
and .023 inch travel.

J-8001-M METRIC DIAL INDICATOR SET Universal

Same as J-8001 with Metric (.01mm graduations


CLASSIFICATION
USA CAN and 5mm travel).
N N
I I

J-8039-A SNAP RING PLIERS (VACUUM GRIP) Universal

Tip 0.03 inch wide 1⁄8 inch x 7⁄8 inch opening

J-8059 SNAP RING PLIER (PARALLEL JAW) Universal

Parallel opening jaw pliers.

To order Special Service Tools call 1-800-662-2001 91


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-8068 TORQUE WRENCH ADAPTER Universal

Square Drive, 3⁄8 inch female to 1⁄2 inch male.

J-8092 UNIVERSAL DRIVER HANDLE Universal

9 inch long 3⁄4 inch-10 thread

J-8433 HEAVY DUTY PULLER Universal

CLASSIFICATION
USA CAN
N N
I I

J-8592 DRIVER HANDLE Universal

12 inch long 3⁄4 inch-10 Thread.

J-21465-13 DRIVER HANDLE EXTENSION Universal

81⁄2 inch long 3⁄4 inch-10, Threaded both ends


(male & female).

J-22610 KEYSTONE CLAMP PLIER Universal

J-22888-D UNIVERSAL REVERSIBLE LEG PULLER Universal

Includes: J-22888-9, J-22888-20A, and J-22888-30.

92 Nissan / Infiniti Special Service Tools


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-22888-20A SIDE BEARING PULLER Universal

Reversible Legs
CLASSIFICATION
USA CAN
N N
I I

J-22912-O1 REAR PINION BEARING REMOVER RL3FO1A, RN4F30A,


RS5F30A, RS5F31A, All
Inner Diameter 2.25 inch (Also Included in
CLASSIFICATION
USA CAN J-39856 Puller Set)
N N

J-23409 DIAL INDICATOR EXTENSION (75⁄8 INCH) Universal

J-23672 DIAL INDICATOR ROLLER ADAPTER Universal

Use with J-8001 and J-8001-M.

J-23907 SEAL AND BUSHING PULLER Universal

⁄2-13 Thread with Clutch Pilot Bearing


1
CLASSIFICATION
USA CAN Puller Adapter
N N
I

J-24319-B STEERING LINKAGE PULLER Universal

CLASSIFICATION
USA CAN
N N
I

J-24405 ADJUSTABLE TORQUE WRENCH Universal

3
⁄8 inch drive, 3 to 28 Newton Meters,
30 to 250 in. lbs. Range (Dual Scale)

To order Special Service Tools call 1-800-662-2001 93


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-24406 ADJUSTABLE TORQUE WRENCH Universal

3
⁄8 inch drive, 23 to 138 Newton Meters,
15 to 100 ft. lbs. Range (Dual Scale)

J-24407 ADJUSTABLE TORQUE WRENCH Universal

1
⁄2 inch drive, 47 to 345 Newton Meters,
30 to 250 ft. lbs. Range (Dual Scale)

J-25310 UNIVERSAL TUBE BENDER Universal

Makes smooth short radius bends up to


180 degrees, 3⁄16 inch thru 3⁄8 inch.

J-25359-C TORX BIT & SOCKET SET (20 PIECE) Universal

Included Storage Box, 20 Piece Set.

J-25681 UNIVERSAL BEARING PULLER Universal

Small Inner Diameter 0-1.25 inch


CLASSIFICATION
USA CAN
N N

J-26900-1 COMBIMIKE MICROMETER Universal

Outside Diameter 0 to 1 inch, English-Metric,


Digital Counter.

J-26900-12 DIAL INDICATOR Universal

10 MM Travel (Mitutoyo)

94 Nissan / Infiniti Special Service Tools


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-26900-13 MAGNETIC INDICATOR BASE Universal

For 1⁄4 inch & 3⁄8 inch Indicator Stems (Mitutoyo)

J-26900-14 HOLE GAUGE SET Universal

Set of 4, (.125 inch - .500 inch)

J-26900-2 COMBIMIKE MICROMETER Universal

Outside Diameter 1 inch to 2 inch, English-Metric,


Digital Counter.

J-26900-3 COMBIMIKE MICROMETER Universal

Outside Diameter 2 inch to 3 inch, English-Metric,


Digital Counter

J-26900-4 COMBIMIKE MICROMETER Universal

Outside Diameter 3 inch to 4 inch, English-Metric,


Digital Counter.

J-26900-5 VERNIER CALIPER Universal

Vernier Caliper Range 6 inch Combination


English or 150mm Metric

J-26900-6 DIAL TYPE CALIPER Universal

Range 6" English

To order Special Service Tools call 1-800-662-2001 95


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-26900-7 DIAL TYPE CALIPER Universal

Range 0-150mm Metric

J-26900-8 FEELER GAUGE SET Universal

26 leaves, .002 inch - .035 inch

J-26900-9 FEELER GAUGE SET Universal

13 Leaves, .03mm - 0.5mm

J-28428-E HIGH INTENSITY BLACK LIGHT KIT Universal

Lamp head rotates full 360 degrees and is


removable from base with 20 ft. cord. Includes
6 (1 oz.) containers of oil additive. UL listed.

J-28509-A CRANKSHAFT SPROCKET REMOVER Universal

J-28585 SNAP RING REMOVER Universal

Used to Remove & Install Large Snap Rings.

J-28667-A DIAL INDICATOR EXTENSION Universal

Use with J-8001 & J-8001-M, 110mm (4.89 inch).

96 Nissan / Infiniti Special Service Tools


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-29803-A ISO FLARING TOOL KIT Universal

Includes Molded Case.

J-29836 UNIVERSAL SNAP RING REMOVER Universal

J-29843 TORX BIT SET Universal

One Piece Design, Chromed Bits fit Automotive


Applications.

J-29844 TORX SOCKET SET Universal

Set of 5 Chromed Sockets on Rail Clip. Used for


Removal & Installation of Torx Head Screw.

J-33179 TORX KEY WRENCH SET Universal

Includes 9 Torx 90 degree angle wrenches in a


plastic storage pouch.

J-34481 FLEX BASE DIAL INDICATOR STAND Universal

J-34673 FLAT GAUGE BAR Universal

Straight Edge

To order Special Service Tools call 1-800-662-2001 97


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-38185 HOSE CLAMP PLIER All Nissan/
Infiniti Vehicles
9 inch long and Features Action Lock to Lock
Jaws in 3 Positions.

J-38218 TAMPER RESISTANT TORX BIT (T40) All Nissan/


Infiniti Vehicles

J-38219 TAMPER RESISTANT TORX BIT (T50) All Airbags

CLASSIFICATION
USA CAN
N N
I I

J-38597 TAMPER RESISTANT TORX BIT (T27) Universal

J-39565 ENGINE EAR ELECTRONIC LISTENING TOOL Universal

J-39570 CHASSIS EAR ELECTRONIC LISTENING TOOL Universal

J-39768 DIAL CALIPER Universal

.001 inch increments

98 Nissan / Infiniti Special Service Tools


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-39776 ELECTRONIC DIGITAL CALIPERS Universal

English and Metric. 0-6 inch in .0005 inch


increments, 0mm-150mm in .01mm imcrements.

J-41517 WIRE BRUSH 92-93 J30 Maxima

CLASSIFICATION
USA CAN
N N

J-42057 NISSAN AIRBAG LOCK KEY SET All Passengers


Side Airbags
CLASSIFICATION
USA CAN
N N
I I

J-42967 TIRE TREAD GAUGE 96-97-Pathfinder

CLASSIFICATION
USA CAN
N N

J-43994 #2 OFFSET WRENCH 99 My Quest

CLASSIFICATION
USA CAN
N

J-44002-24 ⁄4 INCH DRIVE TORQUE WRENCH


1
1999 Quest

CLASSIFICATION
USA CAN
N

J-44002-25 3 INCH EXTENSION 3⁄8 INCH DRIVE 1999 Quest

CLASSIFICATION
USA CAN
N

To order Special Service Tools call 1-800-662-2001 99


General Hand Tools
TOOL NO. ILLUSTRATION DESCRIPTION APPLICATION
J-44002-26 5MM HEX SOCKET 1⁄4 INCH DRIVE 1999 Quest

CLASSIFICATION
USA CAN
N

OF-2513 HARMONIC BALANCER PULLER Universal

Includes 4 sets of hardware.

OF-2533 BEARING REMOVER & SEPARATOR Small Bearings,


Universal
Range 0-2.25 inch
CLASSIFICATION
USA CAN
N N

VA-70433 STANDARD HANDLE TORX SCREWDRIVER SET Universal

This 5 piece set includes TORX sizes T15,T20,


T25, T27, T30. Each is 1 inch x 33⁄8 inch.
Blades are 4 inch, and overall length is 75⁄8 inch.

100 Nissan / Infiniti Special Service Tools


Vehicle Identification Key
FACTORY MODEL NISSAN DESIGNATION FACTORY MODEL NISSAN DESIGNATION
A10 . . . . . . . . . . . . . . . . . . . . . . . . . . . 510 (78-81) S10. . . . . . . . . . . . . . . . . . . . . . . . . . . . 200SX (77-79)
A32 . . . . . . . . . . . . . . . . . . . . . . . . . . . Maxima (95-99) S12. . . . . . . . . . . . . . . . . . . . . . . . . . . . 200SX (84-88)
A33 . . . . . . . . . . . . . . . . . . . . . . . . . . . Maxima (00~) S13. . . . . . . . . . . . . . . . . . . . . . . . . . . . 240SX (89-94)
B11 . . . . . . . . . . . . . . . . . . . . . . . . . . . Sentra (83-86) S14. . . . . . . . . . . . . . . . . . . . . . . . . . . . 240SX (95 -98)
B12 . . . . . . . . . . . . . . . . . . . . . . . . . . . Sentra (87-90) S30. . . . . . . . . . . . . . . . . . . . . . . . . . . . 240Z, 260Z, 280Z (70-78)
B13 . . . . . . . . . . . . . . . . . . . . . . . . . . . Sentra (91-94) S110. . . . . . . . . . . . . . . . . . . . . . . . . . . 200SX (80-83)
B14 . . . . . . . . . . . . . . . . . . . . . . . . . . . Sentra (95-99) S130. . . . . . . . . . . . . . . . . . . . . . . . . . . 280ZX (79-83)
B15 . . . . . . . . . . . . . . . . . . . . . . . . . . . Sentra (00~) T11. . . . . . . . . . . . . . . . . . . . . . . . . . . . Stanza
B110 . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 T12 . . . . . . . . . . . . . . . . . . . . . . . . . . . Stanza
B210 . . . . . . . . . . . . . . . . . . . . . . . . . . B210 U11 . . . . . . . . . . . . . . . . . . . . . . . . . . . Maxima (86-88)
B310 . . . . . . . . . . . . . . . . . . . . . . . . . . 210 U12 . . . . . . . . . . . . . . . . . . . . . . . . . . . Stanza (90-92)
CA32 . . . . . . . . . . . . . . . . . . . . . . . . . . I30 (Infiniti) 96-99 U13 . . . . . . . . . . . . . . . . . . . . . . . . . . . Altima (93-97)
CA33 . . . . . . . . . . . . . . . . . . . . . . . . . . I30 (Infiniti) 00~ V40. . . . . . . . . . . . . . . . . . . . . . . . . . . . Quest (93-98)
D21 . . . . . . . . . . . . . . . . . . . . . . . . . . . Hardbody Truck (86.5-97) V41. . . . . . . . . . . . . . . . . . . . . . . . . . . . Quest (00~)
D22 . . . . . . . . . . . . . . . . . . . . . . . . . . . Frontier Truck (98 ~) WD21. . . . . . . . . . . . . . . . . . . . . . . . . . Pathfinder (86-95)
F10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . F10 WD22. . . . . . . . . . . . . . . . . . . . . . . . . . Xterra (00~)
F31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . M30 (Infiniti) Z31. . . . . . . . . . . . . . . . . . . . . . . . . . . . 300ZX (84-89)
F50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Q45 (Infiniti) 02~ Z32. . . . . . . . . . . . . . . . . . . . . . . . . . . . 300ZX (90-96)
FY33 . . . . . . . . . . . . . . . . . . . . . . . . . . . Q45 (Infiniti) 97-01 250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . President
GC22 . . . . . . . . . . . . . . . . . . . . . . . . . . Van 310 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sedan/Wagon
G50 . . . . . . . . . . . . . . . . . . . . . . . . . . . Q45 (Infiniti) 90-96 320 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
J30. . . . . . . . . . . . . . . . . . . . . . . . . . . . Maxima (89-94) 410/1 . . . . . . . . . . . . . . . . . . . . . . . . . . 410/1
JR50 . . . . . . . . . . . . . . . . . . . . . . . . . . QX4 (97 ~) 510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 510
JY32. . . . . . . . . . . . . . . . . . . . . . . . . . . J30 (93-97) 520/1 . . . . . . . . . . . . . . . . . . . . . . . . . . 520 (Truck)
KN13 . . . . . . . . . . . . . . . . . . . . . . . . . . Pulsar (87-90) 60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Patrol
L30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Alt (98-01) 610S. . . . . . . . . . . . . . . . . . . . . . . . . . . 610 Sedan
M10 . . . . . . . . . . . . . . . . . . . . . . . . . . . Stanza Wagon 610W . . . . . . . . . . . . . . . . . . . . . . . . . . 610 Wagon
M11 . . . . . . . . . . . . . . . . . . . . . . . . . . . Axxess 620 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 620 Truck
N10 . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 710S. . . . . . . . . . . . . . . . . . . . . . . . . . . 710 Sedan
N12 . . . . . . . . . . . . . . . . . . . . . . . . . . . Pulsar (83-86) 710W . . . . . . . . . . . . . . . . . . . . . . . . . . 710 Wagon
P10. . . . . . . . . . . . . . . . . . . . . . . . . . . . G20 (Infiniti) 91-96 720 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 720 Truck
P11. . . . . . . . . . . . . . . . . . . . . . . . . . . . G20 (Infiniti) 99~ 810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 810
R50. . . . . . . . . . . . . . . . . . . . . . . . . . . . Pathfinder (96~) 910 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 810 Maxima
SPSR . . . . . . . . . . . . . . . . . . . . . . . . . . Roadster

To order Special Service Tools call 1-800-662-2001 101


Engine To Model Table
ENGINE MODEL YEARS USED ENGINE MODEL YEARS USED

A12 B110(1200) 1971-1973 L26 S30 1974


A12A 210 1980-1982 L28 S30 1975-1978
A13 B210 1974 S130 1979-1983
A14 B210 1975-1978 L28T S130 1981-1983
210 1979-1982 LD28 910Diesel 1981-1983
310 1979-1980
QG18DE B15 2000~
F10 1977-1978
A15 210 1979-1982 SD22 720 1981-1984
310 1981 SD25 720 1983-1984
CA16DE KN13 1987 SR20DE B13 1991-1994
CA18DE KN13 1988-1989 P10 1991-1996
CA18ET S12 1984, 1986 P11 1999~
KB13 1991-1993
CA20E T12 1984-1988 B14 1995-1999
S12 1984-1988
M10 1986-1988 VE30DE J30(SE) 1992-1994
CA20S T11 1982-1983 VG30DE Z32 1990-1996
JY32 1993-1997
CD17 B11 1983-1986
VG30DETT Z32 1990-1996
E15 310 1982
B11 1982-1983 VG30E Z31 1984-1989
E15ET N12 1983 U11 1985-1989
S12 1987-1988
E16i B12 1987 M30 1990-1993
KN13 1987 V40 1993-1998
E16S B11 1983-1987 WD21 1990-1995
N12 1983-1986 D21 1990-1995
GA16DE B13 1991-1994 VG33E R50 1996-2000
B14 1995-1999 JR50 1997-2000
GA16i B12 1989 D22 1999~
N13 1989-1990 WD22 2000~
KA24DE S13 1991-1994 V41 1999~
S14 1995-1998 VH44DE FY33 1997-2001
U13 1993-1997
VH45DE G50 1990-1996
L30 1998-2001
D22 1998~ VK45DE F50 2002~
WD22 2000~ VQ30DE A32 1995-1999
KA24E S13 1989-1990 CA32 1996-1999
M11 1990 A33 2000~
D21 1990-1997 CA33 2000~
U12 1990-1992 VQ35DE A33 2002~
L16 510 1968-1973 CA33 2002~
PL521 1969-1972 R50 2001~
620 1972-1973 JR50 2001~
L18 610 1973 Z20 S110 1980-1981
710 1974 510 1980-1981
620 1974 720 1983.5-1984
L20B 610 1974-1976 Z22 720 1981-1983
620 1975-1979 S110 1982-1983
720 1980
Z24 720 1983.5-1986
710 1975-1977
S10 1977-1979 Z24i D21 1986.5-1989
510 1978-1979 WD21 1987-1995
L24 S30 1970-1973 C22 1987-1988-1990
810 1977-1980 720 1986
910 1981-1984 Z24S 720 1983.5-1986

102 Nissan / Infiniti Special Service Tools


Nissan to Kent-Moore No.
Cross-Reference Index
NISSAN NO. DESCRIPTION KENT-MOORE NO. NISSAN NO. DESCRIPTION KENT-MOORE NO.
9999500026 Idler Bearing Puller J-25939-01 DISC KV10110300 Piston Pin Kit J-26365-A
9999500032 Axle Bearing Puller Jaws J-45073-7 KV10110600 Valve Spring Compression J-39773
9999500038 Side Bearing Preload J-25407-01 DISC KV10111100 Seal Cutter J-37228
9999500039 Might Tork J-25377 KV10111300 Valve Spring Compressor N/A Commercial
9999500042 Clutch Alignment Arbor J-26366 KV10111400 Attachment N/A Commercial
9999500046 Gage J-25407-01 KV10112000 Hook (Included w/J 38387) Incl W/ J-38387
9999500055 Rear Axle Puller J-25604-01 KV10112100 Torque Angle Wrench BT-8653-A
9999500056 Bearing Puller Set J-45073 KV10114200 Adapter Harness J-36777-4
9999500057 Pinion Gauge Set J-25269-B DISC KV10114300 Engine Attachment Assembly N/A Commercial
9999500058 Bearing Cup Puller J-25647 DISC KV10114400 Oxygen Sensor Wrench J-38365
9999500059 Steering Wheel Puller J-25726-A KV10114700 Main Bearing Cap Remover J-38139
9999500064 Chain Stopper (Wood) J-25660-C KV10115000 Valve Oil Seal Installer N/A Commercial
9999500065 Base J-25407-2 DISC KV10115110 Camshaft Pliers J-38972-1
9999500066 Pinion Gauge Set J-25269-B DISC KV10115120 Lifter Stopper J-38972-2
9999500067 Pinion Gauge Set J-25269-B DISC KV10115150 Camshaft Lifter Stopper Set J-38972
9999500069 Pinion Gauge Set J-25269-B DISC KV10115600 Intake Valve Seal Inst. J-38958
9999500071 Pinion Gauge Set J-25269-B DISC KV10115800 Oil Filter Wrench J-37140-A
9999500072 Pinion Gauge Set J-25269-B DISC KV10115900 Valve Spring Comp. Adapt. J-26336-20
9999500073 Bearing Drift J-25678-01 KV10116100 Valve Seal Puller Holder J-38959
9999500075 Pinion Gauge Set J-25269-B DISC KV10116200 Valve Spring Compressor J-26336-A
9999500077 Pinion Gauge Set J-25269-B DISC KV10116300 Valve Oil Seal Inst. J-38955
9999500080 Side Bearing Race Remover J-25810-B KV10117000 Engine Stand Adpt. N/A Commercial
9999500082 Gage J-25407-1 DISC KV10117600 Fuel pressure check adapter J-44321
9999500083 Sleeve J-25852-4 KV10117700 Ring gear stopper J-44716
9999500084 Side Bearing Puller Pilot J-8107-2 KV10900010 Ignition Timing Coil Adapt. J-36777-1
9999500087 Pinion Gauge Set J-25269-B DISC KV10900020 ECCS Checker J-37368
9999500088 Rear Oil Seal R & I J-25999 DISC KV109B0010 Valve Oil Seal Drift N/A Commercial
9999500089 Gland Wrench J-25825-A KV109D0010 Ignition Timing Adapter Coil J-36777-1
9999500090 Pinion Gauge Set J-25269-B DISC KV16845585 Test Harness J-41128
9999500091 Pinion Gauge Set J-25269-B DISC KV30101000 Clutch Alignment Arbor J-33213
EG11140000 Ignition Timing Harness N/A KV31100300 Fork Rod Pin Punch J-25689-A
EG11160000 Ignition Coil Adapter Harness N/A KV31100401 Transmission Press Stand N/A Commercial
EG11170000 Ignition Timing Harness J-37959 KV31101200 Pressure Gauge Adapter J-34282
EG11170000 VG30E J-37959 KV31101201 Oil Pres. Gauge Adapter N/A
EG14860000 Belt Tension Gauge J-38387 KV31102100 Torque Converter One-Way N/A
EG17650301 Radiator Cap Test Adapter J-33984-A KV31102400 Clutch Spring Compressor J-34285
EM03470000 Piston Ring Comp. J-8037 KV31103000 Drive Handle Drift J-38982
GG9103000 Pinion Preload Gauge J-25765-A KV31103200 Clutch Spring Compressor J-39186
GG9431000 Flare Nut Torque Wrench N/A Commercial KV31103600 Joint Pipe Adapter
HT2400000 Slide Hammer N/A Commercial KV31520000 Drive Pinion Flange Wrench N/A
HT2520000 Ball Joint Remover J-25730-A KV319K0010 Trans Cable Harness J-34270
HT2750000 Ball Joint Remover N/A Commercial KV32100150 Pinion Gauge Set J-25269-B DISC
HT62900000 Socket Adapter N/A Commercial KV32100400 Mainshaft Installer J-26071-B DISC
HT62940000 Socket Adapter N/A Commercial KV32100401 Mainshaft Installer J-26071-B DISC
HT71780000 Spring Compressor N/A Commercial KV32101000 Fork Rod Pin Punch J-25689-A
HT72210000 Rear Axle Bearing Puller Kit J-45073 KV32101100 Fork Pin Punch Commercial
HT72480000 Rear Axle Bearing Puller Kit J-45073 KV32101310 Bearing Remover & Inst. J-26349-A
HT72520000 Tie-rod Puller J-24319-B KV32101320 Bearing Remover & Inst. J-26349-A
IM23600800 Wheel Alignment Attachment N/A Commercial KV32101330 Bearing Remover & Inst. J-26349-A
KV10102800 Slide Hammer J-23907 KV32101350 Bearing Remover & Inst. J-26349-A
KV10105001 Engine Attachment Assembly N/A Commercial KV32101500 Locknut Wrench J-28804
KV10105900 Oil Filter Wrench (80 mm) J-34274 KV33290001 Bearing Race Puller J-34286
KV10106500 Engine Attachment Assembly N/A Commercial KV35325000 Drive Handle Commercial
KV101065001 Engine Stand Shaft N/A Commercial KV37710000 Rear Axle Seal Installer N/A Commercial
KV10107400 Piston Pin Kit J-26365-A KV38100200 Oil Seal Installer N/A Commercial
KV10107501 Valve Lipseal Drift N/A Commercial KV38100300 Side Bearing Installer J-25523
KV10107902 Valve Lipseal Remover J-38959 KV38100401 Pilot Bearing Remover N/A Commercial
KV10109210 Valve Spring Compressor N/A J-33986 KV38100500 Front Oil Seal Installer N/A Commercial
KV10109250 Valve Spring Comp. J-26336-A KV38100580 Susp. Bushing Set J-26363-B DISC

To order Special Service Tools call 1-800-662-2001 103


Nissan to Kent-Moore No.
Cross-Reference Index
NISSAN NO. DESCRIPTION KENT-MOORE NO. NISSAN NO. DESCRIPTION KENT-MOORE NO.
KV38100600 Side Bearing Shim Installer J-25267 KV48102500 Pressure Gauge Adapter J-33914
KV38100800 Rear Axle Puller J-25604-01 KV48103000 Oil Seal Installer J-34263
KV38102100 Side Bearing Inst. J-25803-01 KV48103100 Oil Seal Installer J-34264
KV38102510 Drift N/A Commercial KV48104400 Rack Seal Ring Reformer N/A
KV38103701 Hub Holding Wrench J-26085 KV48104400 Rack Seal Ring Inst. N/A
KV38103800 Front Oil Seal Installer N/A KV99103900 Clutch Holding Wrench N/A
KV38103910 Gauge Block J-33920 KV99104300 Filler Cap Adapter J-39071
KV38104100 Gear & Race Installer J-35871 KV991044S0 Oil Pressure Adapter Set N/A
KV38105210 Pre-load Adapter J-39883 KV99106100 Clutch Disc Wrench J-38874
KV38105500 Differential Side KV99106200 Pulley Inst. N/A
Oil Seal Protector J-33904 KV99106300 Adapter Harness J-36777-3
KV38105710 Preload Adapter J-39026 KV99106400 Air Bag Deployment Kit J-38381
KV38105850 Brg. Height Gauge J-34291-A KV99108200 Deployment tool J-38381-50
KV38105900 Preload Wrench J-33201-A KV99108300 Deployment tool J-38381-35
KV38106000 Shim Selecting Gauge J-34291-A KV99109000 Deployment tool J-44230
KV38106500 Preload Wrench J-34284 KV991V0010 F.A.S. Pressure Gauge J-39528
KV38106700 Oil Seal Protector L.H. J-34296 KV99231010 Clutch Hub Holder N/A Commercial
KV38106800 Oil Seal Protector R.H. J-34297 KV99231162 Clutch Holding Wrench N/A Commercial
KV38107300 Preload Adapter N/A KV99232002 Drive Plate Remover J-26571
KV38107700 Preload Adapter J-39027 KV99232022 Drive Plate Remover J-26571
KV39930000 Tube Pressor N/A Commercial KV99232232 Clutch Hub Puller J-33923
KV40100300 Pinion Oil Seal Installer J-25405 KV99232340 Clutch Hub Puller J-33944-A
KV40100510 Susp. Bushing Set J-26363-B KV99233040 Pulley Puller Pilot J-26720-A
KV40100530 Susp. Bushing Set J-26363-B KV99234160 Pulley Installer N/A Commercial
KV40100550 Susp. Bushing Set J-26363-B KV99234330 Pulley Installer N/A Commercial
KV40100610 Bearing Race Inst. J-26089 KV99235140 Shaft Seal R & I N/A Commercial
KV40100620 Knuckle & Hub Seal Inst. J-26091 KV99235160 Locknut Wrench J-29751
KV40100621 Pinion Oil Seal Installer J-25273 KV99241420 Blind Cover Set J-33902
KV40100630 Hub Bearing Inst. J-26092 KV99267420 Shaft Seal Protector N/A Commercial
KV40100650 Bearing Race Inst. J-26089 KV99412302 Clutch Spanner Wench J-24878-1
KV40100700 Bearing Preload Gauge J-26093 KV99412305 Clutch Hub Nut R & I J-24878-2
KV40100800 Gland Packing Wrench J-26083 KV99412306 Clutch Hub Puller J-28823
KV40101000 Rear Axle Puller J-25604-01 KV99412310 Locknut Spanner Wrench J-24878-4
KV40101200 Susp. Bushing Set J-26363-B KV99412320 Seal Remover & Inst. J-9393-A
KV40101400 Susp. Bushing Set J-26363-B KV99412321 Seal Remover & Inst. J-9392-01
KV40101630 Oil Seal Installer J-35870 KV99412329 Compressor Shaft Rotator J-26072
KV401021S0 Bearing Race Drift N/A KV994C154 Blind Cover Set J-33902
KV40102500 Hub Nut Socket J-28815 KV994C155 Blind Cover Set J-33902
KV40104100 Axle Stand N/A Commercial KV994C1552 Charging Adapter N/A Commercial
KV40104710 Final Mounting Insulator Tool N/A Commercial KV994C5782 Pulley Puller Pilot J-33207
KV401052S0 Suspension Member KV994C5784 Seal Protector J-33212
Rem. & Inst. N/A Commercial KV99845991 Clutch Disc Wrench N/A Commercial
KV40105400 Wheel Bearing Lock KV99859981 Clutch Disc Puller N/A Commercial
Nut Wrench J-36001 KV998VR001 Clutch Disc Puller N/A Commercial
KV40106300 HICAS Spacer J-41306 KV999G0010 Fuel Tank Lock Ring Socket J-38879-A
KV48100700 Torque Adapter J-26364 KV999P1000 A.B.S. Checker N/A
KV48100930 Bearing & Seal Inst. J-26367 KV999P1010 A.B.S. Checker
KV48100950 Bearing & Seal Inst. J-26367 Adapter Harness N/A
KV48101100 Torque Adapter J-26364 KV999P1020 A.B.S. Checker
KV48101400 Plug Wrench J-28803 Adapter Harness N/A
KV48101500 Locknut Wrench J-28802 KV999V0010 Diagnostic Sub-Harness J-34273
KV48101600 Rear Housing Locknut Wr. J-28818 LM40860200 Attachment Board (Lifts) N/A
KV48101700 Rear Cover Wrench J-28819 LM45190000 Safety Stand (Lifts) N/A
KV48101800 Cylinder Locknut Spanner J-28820 N/A Deployment Tool Adapter J-38381-70
KV48101900 Cylinder Holder J-28821 N/A Deployment Tool Adapter J-38381-65
KV48102000 Locknut Wrench N/A PT45120000 Torque Wrench J-25703 DISC
KV48102100 Steering Gear Holder J-28817 SI30611000 Driver Handle J-25742-1
KV48102200 Steering Gear Holder J-28817 ST0501S000 Engine Stand N/A Commercial
KV48102300 Cylinder Locknut Spanner J-28820 ST06310000 Differential Holding Fix. J-34310

104 Nissan / Infiniti Special Service Tools


Nissan to Kent-Moore No.
Cross-Reference Index
NISSAN NO. DESCRIPTION KENT-MOORE NO. NISSAN NO. DESCRIPTION KENT-MOORE NO.
ST06320000 Differential Holding Fix. J-34310 ST23540000 Fork Rod Pin Punch J-25689-A
ST06330000 Differential Holding Fix. J-34310 ST23800000 Transmission Bearing Installer J-25691-01
ST07630000 Rear Axle Puller J-25604-01 ST23810001 Adapter Setting Plate N/A
ST07640000 Rear Axle Puller J-25604-01 ST23860000 Drift N/A Commercial
ST07870000 Transmission Holding Fixture J-37068 ST25050000 Trans. Pressure Gauge J-34301
ST10120000 10mm Head Bolt Wrench J-24239-01 ST25051000 Gauge J-25695-1 DISC
ST10300000 Cylinder Liner Puller J-33903 DISC ST25051001 Oil Pressure Gauge J-34301
ST10640000 Rocker Arm Pivot Adjuster J-25615-01 ST25052000 Oil Pressure Gauge Hose Srv. Part To J-34301
ST10640001 Rocker Arm Pivot Adjuster J-25615-01 ST25053000 Tube Fitting J-25695-3 DISC
ST10644001 Rocker Arm Pivot Adjuster J-25615-01 ST25054000 Short Elbow J-25695-4 DISC
ST11030000 Valve Guide Reamer Set J-25618-02 ST25055000 Long Elbow J-25695-5 DISC
ST11031000 12.2mm Reamer J-25618-3 ST2505S001 Pressure Gauge Test Set J-34301
ST11032000 8mm Reamer J-25618-2 ST25100000 Torque Wrench J-25703 DISC
ST11033000 Guide Installer J-25618-1 ST25120000 Torque Wrench J-25703 DISC
ST11035000 Valve Guide Reamer Set J-25618-02 ST25310000 Snap Ring Pliers J-8059
ST11070000 Valve Guide Reamer Set J-25618-02 ST25320001 Snap Ring Pliers J-8059
ST11075000 Valve Guide Reamer Set J-25618-02 ST2542000 Clutch Spring Comp. J-34285-A
ST11080000 Valve Guide Reamer Set J-25618-02 ST2542000 Bearing Installer J-26010-01
ST11081000 12.2mm Reamer J-25618-3 ST25420000 Bearing Installer J-26010-01
ST11085000 Valve Guide Reamer Set J-25618-02 ST25420001 Clutch Spring Comp. J-34285
ST11320000 Guide Installer J-25618-1 ST25570000 5mm Serrated Bit J-23659-1 DISC
ST12070000 Valve Spring Compressor J-8062 ST25570001 5mm Serrated Bit J-23659-1 DISC
ST12072000 Valve Spring Compressor J-8062 ST25580000 Oil Pump Setting Gauge J-25719 DISC
ST13030000 Piston Pin Service Set J-26365-A ST25850000 Slide Hammers J-25721-A
ST13030001 Piston Pin Service Set J-26365-A ST27091000 Pressure Gauge J-26357 & J-26357-10
ST13040000 Piston Pin Service Set J-26365-A ST27100000 Steering Wheel Puller J-25726-A
ST15243001 Universal Driver Handle J-26090 ST27180000 Steering Wheel Puller J-25726-A
ST15250000 Universal Driver Handle J-26090 ST27180001 Steering Wheel Puller J-25726-A
ST15310000 Rear Oil Seal Installer J-25640-B ST27850000 Ball Joint Remover J-25730-A
ST16510000 Bearing Cap Remover J-25647 DISC ST29020001 Linkage Puller J-24319-01
ST16510001 Bearing Cap Remover J-25647 DISC ST30021000 Bearing Puller (Large) J-22912-01
ST16515000 Bearing Cap Remover J-25647 DISC ST30030000 Bearing Puller (Large) J-22912-01
ST16610001 Slide Hammer J-23907 ST30031000 Bearing Puller (Large) J-22912-01
ST16680000 Clutch Pilot Brg. Remover J-23907 ST30032000 Bearing Installer J-26010-01
ST16680001 Clutch Pilot Brg. Remover J-23907 ST30037000 Puller N/A Commercial
ST17420000 Chain Stopper (Wood) J-25660-C ST30600000 Countershaft Bearing Installer J-25863-01
ST17420001 Chain Stopper (Wood) J-25660-C ST30610000 Pinion Brg Race Inst. Set J-25742
ST19320000 Oil Filter Wrench J-22700 ST30611000 Driver Handle J-25742-1
ST19530000 Injection Pump Gear Puller J-28831-A ST30612000 Installer J-25742-2
ST20050010 Base Plate N/A ST30613000 Rear Pinion Outer
ST20050100 Distance Piece N/A Race Installer J-35868
ST20050240 Diaphragm Spring ST30613000 Bearing Installer J-25742-3
Adjusting Wrench N/A ST30615000 Pinion Brg Race Inst Set J-25742
ST20230000 Pinion Gauge Set J-25269-B DISC ST30621000 Pinion Bearing Race
ST20240000 Pinion Gauge Set J-25269-B DISC Installer Set J-25742-5
ST20600000 Clutch Alignment Arbor J-26366 ST30621000 Outer Race Installer J-35869
ST20610000 Clutch Alignment Arbor J-26366 ST30633000 Side Bearing Race Inst. N/A Commercial
ST20630000 Clutch Alignment Arbor J-26366 ST30650000 Pilot Brg. & Pinion
ST22350000 Mainshaft Bearing Inst. J-25678-01 Brg. Race Inst. J-25749-A
ST22360000 Counter Gear Brg. Inst. J-25679-01 ST30650001 Bearing Remover J-25749-A
ST22360001 Counter Gear Brg. Inst. J-25679-01 ST30701000 Bearing Installer J-25742-2
ST22360002 Counter Gear Bearing Installer J-25679-01 ST30720000 Pinion Oil Seal Installer J-25405
ST22452000 Reverse Hub Installer J-34335 ST30720000 Mainshaft Front Brg Inst N/A
ST22460001 Bearing R & I Set J-26349-A ST30901000 Bearing Installer J-26010-01
ST22480000 Bearing R & I Set J-26349-A ST3090S000 Drive Pinion Rear
ST22520000 Mainshaft Nut Wrench J-26348 Inner Race Inst. J-22912-01
ST22730000 Bearing Puller (Small) J-25681 ST31100000 Pinion Gauge Set J-25269-B DISC
ST23050000 Gear Height Gauge J-25684-01 DISC ST31101000 Pinion Gauge Set J-25269-B DISC
ST23100000 Countershaft Guide J-25685-A ST31102000 Pinion Gauge Set J-25269-B DISC

To order Special Service Tools call 1-800-662-2001 105


Nissan to Kent-Moore No.
Cross-Reference Index
NISSAN NO. DESCRIPTION KENT-MOORE NO. NISSAN NO. DESCRIPTION KENT-MOORE NO.
ST31105000 Pinion Gauge Set J-25269-B DISC ST35100000 Drive Shaft Remover J-26079-A
ST31120000 Pinion Gauge Set J-25269-B DISC ST35110000 Front Hub Knuckle
ST31121000 Pinion Gauge Set J-25269-B DISC Brg Preload J-26093
ST31122000 Pinion Gauge Set J-25269-B DISC ST35200000 Front Hub Holding Tool J-26085
ST31125000 Pinion Gauge Set J-25269-B DISC ST35271000 Front Hub & Inner
ST31140000 Pinion Gauge Set J-25269-B DISC Oil Seal Inst J-26091
ST31141000 Pinion Gauge Set J-25269-B DISC ST35272000 Front Hub Bearing Inst. J-26092
ST31145000 Pinion Gauge Set J-25269-B DISC ST35273000 Front Hub Brg. &
ST31150000 Pinion Gauge Set J-25269-B DISC Outer Race Inst. J-26089
ST31180000 Pinion Gauge Set J-25269-B DISC ST35321000 Drift N/A Commercial
ST31190000 Pinion Preload Gauge J-25765-A ST35490000 Gland Packing Wrench J-26083
ST31210000 Pinion Gauge Set J-25269-B DISC ST35500000 Strut (Gland Packing) Wrench J-25825-A
ST31211000 Pinion Gauge Set J-25269-B DISC ST35500001 Strut (Gland Packing) Wrench J-25825-A
ST31212000 Pinion Gauge Set J-25269-B DISC ST35652000 Strut Attachment N/A Commercial
ST31213000 Pinion Gauge Set J-25269-B DISC ST36230000 Slide Hammer J-25840-A
ST31214000 Pinion Gauge Set J-25269-B DISC ST3670000 Bushing R & I Adapter J-26363-8 DISC
ST31215000 Pinion Gauge Set J-25269-B DISC ST36700000 Bushing R & I Adapter J-26363-7 DISC
ST31230000 Pinion Gauge Set J-25269-B DISC ST36700010 Suspension Bushing Set J-26363-B DISC
ST3127S000 Pinion Height/Bearing ST36700020 Suspension Bushing Set J-26363-B DISC
Preload Gauge N/A ST36710000 Bushing R & I Adapter J-26363-7 & J-26363-8
ST31500000 Pinion Gauge Set J-25269-B DISC ST36711000 Suspension Bushing Set J-26363-B DISC
ST31530000 Pinion Flange Wrench J-25774-A ST36712000 Suspension Bushing Set J-26363-B DISC
ST31850000 Pinion Gauge Set J-25269-B DISC ST36720000 Bushing R & I Adapter J-26363-2 & J-26363-3
ST31851000 Pinion Gauge Set J-25269-B DISC ST36730000 Idler Gear Installer
ST31855000 Pinion Gauge Set J-25269-B DISC ST37120000 Bearing Puller Set J-45073
ST31942000 Pinion Gauge Set J-25269-B DISC ST37120001 Bearing Puller Set J-45073
ST32400000 Hub Holding Wrench J-26085 ST37130000 Bearing Puller Set J-45073
ST32500000 Weight Block J-25407-3 DISC ST37140000 Bearing Puller Set J-45073
ST32501000 Weight Block J-25407-3 DISC ST37140001 Bearing Puller Set J-45073
ST32502000 Gage J-25407-1 DISC ST37160000 Bearing Puller Set J-45073
ST32505000 Weight Block J-25407-3 DISC ST37400000 Differential Holding Fixture J-34310
ST33010000 Side Bearing Puller J-22888-D ST37750000 Countershaft Bearing Installer J-25863-01
ST33012000 Side Bearing Puller J-22888-D ST37780000 Hub Bearing Installer J-25863-01
ST33050000 Side Bearing Puller J-22888-D ST37791000 Oil Filter Wrench J-22700
ST33050001 Side Bearing Puller J-22888-D ST37830000 Drift N/A Commercial
ST33055000 Side Bearing Puller J-22888-D ST37850000 Oil Seal Installer J-25405
ST3305S001 Side Bearing Puller J-22888-20 ST38020000 Bearing Locknut Wrench J-45073-1
ST33061000 Side Bearing Puller Pilot J-8107-2 ST38060000 Pinion & Axle Flange Wrench J-25774-A
ST3306S001 Differential Side Bearing ST38060001 Pinion & Axle Flange Wrench J-25774-A
Puller Set J-22888-D ST38060002 Pinion Flange Wrench J-34311
ST33070000 Side Bearing Puller J-22888-D ST38070000 Rear Axle Brg. Locknut
ST330S1001 Differential Side Bearing Wrench J-36001
Puller Set J-22888-D ST38210000 Bushing R & I J-26363-B
ST33200000 Side Bearing & Side Flange ST38280000 Rear Bushing Remover
Seal Installer J-26082 & Installer J-38198
ST33210000 Counter Gear Frt. Brg Inst J-25523 ST45120000 Torque Wrench J-25703 DISC
ST33210000 Front Cover Oil Seal Inst J-25803-01 ST46200000 Pinion Gauge Set J-25269-B DISC
ST33210000 Side Bearing Installer J-25803-01 ST46780000 Slide Hammer J-25840-A
ST33220000 Side Bearing Inst. N/A Commercial ST46860000 Side Bearing Puller J-22888-D
ST33230000 Drive Shaft Oil Seal Installer J-35867 ST46940000 Bearing Puller Set J-25852-B
ST33230000 Differential Side ST49010000 10mm Head Bolt Wrench J-24239-01
Bearing Installer J-25805-01 ST49180000 Hub Bearing Installer J-25863-01
ST33290001 Bearing Race Puller J-34286 ST49260000 Diff. Side Bearing Inst J-25805-01
ST33300000 Mounting Drift J-25813 DISC ST49350000 Chain Stopper (Wood) J-25660-C
ST33300001 Mounting Drift J-25813 DISC ST69860000 Snap Ring Pliers J-25911-A
ST33400001 Side Bearing & Side WS39930000 Tube Presser N/A Commercial
Flange Seal Installer J-26082
ST33720000 Side Oil Seal Installer N/A Commercial
ST33741000 Gauge J-25407-1 DISC

106 Nissan / Infiniti Special Service Tools


Kent-Moore to Nissan No.
Cross-Reference Index
KENT-MOORE NO. DESCRIPTION NISSAN NO. KENT-MOORE NO. DESCRIPTION NISSAN NO.
BT-8653-A Torque Angle Wrench KV10112100 J-25269-B DISC Pinion Gauge Set ST31141000
Commercial Fork Pin Punch KV32101100 J-25269-B DISC Pinion Gauge Set ST31145000
Commercial Drive Handle KV35325000 J-25269-B DISC Pinion Gauge Set ST31150000
Incl W/J-38387 Hook (Included w/J-38387) KV10112000 J-25269-B DISC Pinion Gauge Set ST31180000
J-22700 Oil Filter Wrench ST19320000 J-25269-B DISC Pinion Gauge Set ST31210000
J-22700 Oil Filter Wrench ST37791000 J-25269-B DISC Pinion Gauge Set ST31211000
J-22888-20 Side Bearing Puller ST3305S001 J-25269-B DISC Pinion Gauge Set ST31212000
J-22888-D Side Bearing Puller ST33010000 J-25269-B DISC Pinion Gauge Set ST31213000
J-22888-D Side Bearing Puller ST33012000 J-25269-B DISC Pinion Gauge Set ST31214000
J-22888-D Side Bearing Puller ST33050000 J-25269-B DISC Pinion Gauge Set ST31215000
J-22888-D Side Bearing Puller ST33050001 J-25269-B DISC Pinion Gauge Set ST31230000
J-22888-D Side Bearing Puller ST33055000 J-25269-B DISC Pinion Gauge Set ST31500000
J-22888-D Differential Side Bearing J-25269-B DISC Pinion Gauge Set ST31850000
Puller Set ST3306S001 J-25269-B DISC Pinion Gauge Set ST31851000
J-22888-D Side Bearing Puller ST33070000 J-25269-B DISC Pinion Gauge Set ST31855000
J-22888-D Differential Side Bearing J-25269-B DISC Pinion Gauge Set ST31942000
Puller Set ST330S1001 J-25269-B DISC Pinion Gauge Set ST46200000
J-22888-D Side Bearing Puller ST46860000 J-25273 Pinion Oil Seal Installer KV40100621
J-22912-01 Bearing Puller (Large) ST30021000 J-25377 Might Tork 9999500039
J-22912-01 Bearing Puller (Large) ST30030000 J-25405 Pinion Oil Seal Installer KV40100300
J-22912-01 Bearing Puller (Large) ST30031000 J-25405 Pinion Oil Seal Installer ST30720000
J-22912-01 Drive Pinion Rear Inner Race Inst. ST3090S000 J-25405 Oil Seal Installer ST37850000
J-23659-1 DISC 5mm Serrated Bit ST25570000 J-25407-01 Gage 9999500046
J-23659-1 DISC 5mm Serrated Bit ST25570001 J-25407-01 DISC Side Bearing Preload 9999500038
J-23907 Slide Hammer KV10102800 J-25407-1 DISC Gage 9999500082
J-23907 Slide Hammer ST16610001 J-25407-1 DISC Gage ST32502000
J-23907 Clutch Pilot Brg. Remover ST16680000 J-25407-1 DISC Gauge ST33741000
J-23907 Clutch Pilot Brg. Remover ST16680001 J-25407-2 DISC Base 9999500065
J-24239-01 10mm Head Bolt Wrench ST10120000 J-25407-3 DISC Weight Block ST32500000
J-24239-01 10mm Head Bolt Wrench ST49010000 J-25407-3 DISC Weight Block ST32501000
J-24319-01 Linkage Puller ST29020001 J-25407-3 DISC Weight Block ST32505000
J-24319-B Tie-rod Puller HT72520000 J-25523 Side Bearing Installer KV38100300
J-24878-1 Clutch Spanner Wench KV99412302 J-25523 Counter Gear Frt. Brg Inst ST33210000
J-24878-2 Clutch Hub Nut R & I KV99412305 J-25604-01 Rear Axle Puller 9999500055
J-24878-4 Locknut Spanner Wrench KV99412310 J-25604-01 Rear Axle Puller KV38100800
J-25267 Side Bearing Shim Installer KV38100600 J-25604-01 Rear Axle Puller KV40101000
J-25269-B DISC Pinion Gauge Set 9999500057 J-25604-01 Rear Axle Puller ST07630000
J-25269-B DISC Pinion Gauge Set 9999500066 J-25604-01 Rear Axle Puller ST07640000
J-25269-B DISC Pinion Gauge Set 9999500067 J-25615-01 Rocker Arm Pivot Adjuster ST10640000
J-25269-B DISC Pinion Gauge Set 9999500069 J-25615-01 Rocker Arm Pivot Adjuster ST10640001
J-25269-B DISC Pinion Gauge Set 9999500071 J-25615-01 Rocker Arm Pivot Adjuster ST10644001
J-25269-B DISC Pinion Gauge Set 9999500072 J-25618-02 Valve Guide Reamer Set ST11030000
J-25269-B DISC Pinion Gauge Set 9999500075 J-25618-02 Valve Guide Reamer Set ST11035000
J-25269-B DISC Pinion Gauge Set 9999500077 J-25618-02 Valve Guide Reamer Set ST11070000
J-25269-B DISC Pinion Gauge Set 9999500087 J-25618-02 Valve Guide Reamer Set ST11075000
J-25269-B DISC Pinion Gauge Set 9999500090 J-25618-02 Valve Guide Reamer Set ST11080000
J-25269-B DISC Pinion Gauge Set 9999500091 J-25618-02 Valve Guide Reamer Set ST11085000
J-25269-B DISC Pinion Gauge Set KV32100150 J-25618-1 Guide Installer ST11033000
J-25269-B DISC Pinion Gauge Set ST20230000 J-25618-1 Guide Installer ST11320000
J-25269-B DISC Pinion Gauge Set ST20240000 J-25618-2 8mm Reamer ST11032000
J-25269-B DISC Pinion Gauge Set ST31100000 J-25618-3 12.2mm Reamer ST11031000
J-25269-B DISC Pinion Gauge Set ST31101000 J-25618-3 12.2mm Reamer ST11081000
J-25269-B DISC Pinion Gauge Set ST31102000 J-25640-B Rear Oil Seal Installer ST15310000
J-25269-B DISC Pinion Gauge Set ST31105000 J-25647 DISC Bearing Cup Puller 9999500058
J-25269-B DISC Pinion Gauge Set ST31120000 J-25647 DISC Bearing Cap Remover ST16510000
J-25269-B DISC Pinion Gauge Set ST31121000 J-25647 DISC Bearing Cap Remover ST16510001
J-25269-B DISC Pinion Gauge Set ST31122000 J-25647 DISC Bearing Cap Remover ST16515000
J-25269-B DISC Pinion Gauge Set ST31125000 J-25660-C Chain Stopper (Wood) 9999500064
J-25269-B DISC Pinion Gauge Set ST31140000 J-25660-C Chain Stopper (Wood) ST17420000

To order Special Service Tools call 1-800-662-2001 107


Kent-Moore to Nissan No.
Cross-Reference Index
KENT-MOORE NO. DESCRIPTION NISSAN NO. KENT-MOORE NO. DESCRIPTION NISSAN NO.
J-25660-C Chain Stopper (Wood) ST17420001 J-25852-B Bearing Puller Set ST46940000
J-25660-C Chain Stopper (Wood) ST49350000 J-25863-01 Countershaft Bearing Installer ST30600000
J-25678-01 Bearing Drift 9999500073 J-25863-01 Countershaft Bearing Installer ST37750000
J-25678-01 Mainshaft Bearing Inst. ST22350000 J-25863-01 Hub Bearing Installer ST37780000
J-25679-01 Counter Gear Brg. Inst. ST22360000 J-25863-01 Hub Bearing Installer ST49180000
J-25679-01 Counter Gear Brg. Inst. ST22360001 J-25911-A Snap Ring Pliers ST69860000
J-25679-01 Counter Gear Bearing Installer ST22360002 J-25939-01 DISC Idler Bearing Puller 9999500026
J-25681 Bearing Puller (Small) ST22730000 J-25999 DISC Rear Oil Seal R & I 9999500088
J-25684-01 DISC Gear Height Gauge ST23050000 J-26010-01 Bearing Installer ST2542000
J-25685-A Countershaft Guide ST23100000 J-26010-01 Bearing Installer ST25420000
J-25689-A Fork Rod Pin Punch KV31100300 J-26010-01 Bearing Installer ST30032000
J-25689-A Fork Rod Pin Punch KV32101000 J-26010-01 Bearing Installer ST30901000
J-25689-A Fork Rod Pin Punch ST23540000 J-26071-B DISC Mainshaft Installer KV32100400
J-25691-01 Transmission Bearing Installer ST23800000 J-26071-B DISC Mainshaft Installer KV32100401
J-25695-1 DISC Gauge ST25051000 J-26072 Compressor Shaft Rotator KV99412329
J-25695-3 DISC Tube Fitting ST25053000 J-26079-A Drive Shaft Remover ST35100000
J-25695-4 DISC Short Elbow ST25054000 J-26082 Side Bearing & Side Flange
J-25695-5 DISC Long Elbow ST25055000 Seal Installer ST33200000
J-25703 DISC Torque Wrench PT45120000 J-26082 Side Bearing & Side Flange
J-25703 DISC Torque Wrench ST25100000 Seal Installer ST33400001
J-25703 DISC Torque Wrench ST25120000 J-26083 Gland Packing Wrench KV40100800
J-25703 DISC Torque Wrench ST45120000 J-26083 Gland Packing Wrench ST35490000
J-25719 DISC Oil Pump Setting Gauge ST25580000 J-26085 Hub Holding Wrench KV38103701
J-25721-A Slide Hammers ST25850000 J-26085 Hub Holding Wrench ST32400000
J-25726-A Steering Wheel Puller 9999500059 J-26085 Front Hub Holding Tool ST35200000
J-25726-A Steering Wheel Puller ST27100000 J-26089 Bearing Race Inst. KV40100610
J-25726-A Steering Wheel Puller ST27180000 J-26089 Bearing Race Inst. KV40100650
J-25726-A Steering Wheel Puller ST27180001 J-26089 Front Hub Brg. & Outer
J-25730-A Ball Joint Remover HT2520000 Race Inst. ST35273000
J-25730-A Ball Joint Remover ST27850000 J-26090 Universal Driver Handle ST15243001
J-25742 Pinion Brg Race Inst. Set ST30610000 J-26090 Universal Driver Handle ST15250000
J-25742 Pinion Brg Race Inst Set ST30615000 J-26091 Knuckle & Hub Seal Inst. KV40100620
J-25742-1 Driver Handle SI30611000 J-26091 Front Hub & Inner Oil
J-25742-1 Driver Handle ST30611000 Seal Inst ST35271000
J-25742-2 Installer ST30612000 J-26092 Hub Bearing Inst. KV40100630
J-25742-2 Bearing Installer ST30701000 J-26092 Front Hub Bearing Inst. ST35272000
J-25742-3 Bearing Installer ST30613000 J-26093 Bearing Preload Gauge KV40100700
J-25742-5 Pinion Bearing Race Installer Set ST30621000 J-26093 Front Hub Knuckle Brg Preload ST35110000
J-25749-A Pilot Brg. & Pinion Brg. Race Inst. ST30650000 J-26336-20 Valve Spring Comp. Adapt. KV10115900
J-25749-A Bearing Remover ST30650001 J-26336-A Valve Spring Comp. KV10109250
J-25765-A Pinion Preload Gauge GG9103000 J-26336-A Valve Spring Compressor KV10116200
J-25765-A Pinion Preload Gauge ST31190000 J-26348 Mainshaft Nut Wrench ST22520000
J-25774-A Pinion Flange Wrench ST31530000 J-26349-A Bearing Remover & Inst. KV32101310
J-25774-A Pinion & Axle Flange Wrench ST38060000 J-26349-A Bearing Remover & Inst. KV32101320
J-25774-A Pinion & Axle Flange Wrench ST38060001 J-26349-A Bearing Remover & Inst. KV32101330
J-25803-01 Side Bearing Inst. KV38102100 J-26349-A Bearing Remover & Inst. KV32101350
J-25803-01 Front Cover Oil Seal Inst ST33210000 J-26349-A Bearing R & I Set ST22460001
J-25803-01 Side Bearing Installer ST33210000 J-26349-A Bearing R & I Set ST22480000
J-25805-01 Differential Side Bearing Installer ST33230000 J-26357 &
J-25805-01 Diff. Side Bearing Inst ST49260000 J-26357-10 Pressure Gauge ST27091000
J-25810-B Side Bearing Race Remover 9999500080 J-26363-2 &
J-25813 DISC Mounting Drift ST33300000 J-26363-3 Bushing R & I Adapter ST36720000
J-25813 DISC Mounting Drift ST33300001 J-26363-7 &
J-25825-A Gland Wrench 9999500089 J-26363-8 Bushing R & I Adapter ST36710000
J-25825-A Strut (Gland Packing) Wrench ST35500000 J-26363-7 DISC Bushing R & I Adapter ST36700000
J-25825-A Strut (Gland Packing) Wrench ST35500001 J-26363-8 DISC Bushing R & I Adapter ST3670000
J-25840-A Slide Hammer ST36230000 J-26363-B Susp. Bushing Set KV40100510
J-25840-A Slide Hammer ST46780000 J-26363-B Susp. Bushing Set KV40100530
J-25852-4 Sleeve 9999500083 J-26363-B Susp. Bushing Set KV40100550

108 Nissan / Infiniti Special Service Tools


Kent-Moore to Nissan No.
Cross-Reference Index
KENT-MOORE NO. DESCRIPTION NISSAN NO. KENT-MOORE NO. DESCRIPTION NISSAN NO.
J-26363-B Susp. Bushing Set KV40101200 J-34284 Preload Wrench KV38106500
J-26363-B Susp. Bushing Set KV40101400 J-34285 Clutch Spring Comp. ST25420001
J-26363-B Bushing R & I ST38210000 J-34285 Clutch Spring Compressor KV31102400
J-26363-B DISC Susp. Bushing Set KV38100580 J-34285-A Clutch Spring Comp. ST2542000
J-26363-B DISC Suspension Bushing Set ST36700010 J-34286 Bearing Race Puller KV33290001
J-26363-B DISC Suspension Bushing Set ST36700020 J-34286 Bearing Race Puller ST33290001
J-26363-B DISC Suspension Bushing Set ST36711000 J-34291-A Brg. Height Gauge KV38105850
J-26363-B DISC Suspension Bushing Set ST36712000 J-34291-A Shim Selecting Gauge KV38106000
J-26364 Torque Adapter KV48100700 J-34296 Oil Seal Protector L.H. KV38106700
J-26364 Torque Adapter KV48101100 J-34297 Oil Seal Protector R.H. KV38106800
J-26365-A Piston Pin Kit KV10107400 J-34301 Trans. Pressure Gauge ST25050000
J-26365-A Piston Pin Kit KV10110300 J-34301 Oil Pressure Gauge ST25051001
J-26365-A Piston Pin Service Set ST13030000 J-34301 Pressure Gauge Test Set ST2505S001
J-26365-A Piston Pin Service Set ST13030001 J-34310 Differential Holding Fix. ST06310000
J-26365-A Piston Pin Service Set ST13040000 J-34310 Differential Holding Fix. ST06320000
J-26366 Clutch Alignment Arbor 9999500042 J-34310 Differential Holding Fix. ST06330000
J-26366 Clutch Alignment Arbor ST20600000 J-34310 Differential Holding Fixture ST37400000
J-26366 Clutch Alignment Arbor ST20610000 J-34311 Pinion Flange Wrench ST38060002
J-26366 Clutch Alignment Arbor ST20630000 J-34335 Reverse Hub Installer ST22452000
J-26367 Bearing & Seal Inst. KV48100930 J-35867 Drive Shaft Oil Seal Installer ST33230000
J-26367 Bearing & Seal Inst. KV48100950 J-35868 Rear Pinion Outer Race Installer ST30613000
J-26571 Drive Plate Remover KV99232002 J-35869 Outer Race Installer ST30621000
J-26571 Drive Plate Remover KV99232022 J-35870 Oil Seal Installer KV40101630
J-26720-A Pulley Puller Pilot KV99233040 J-35871 Gear & Race Installer KV38104100
J-28802 Locknut Wrench KV48101500 J-36001 Wheel Bearing Lock Nut Wrench KV40105400
J-28803 Plug Wrench KV48101400 J-36001 Rear Axle Brg. Locknut Wrench ST38070000
J-28804 Locknut Wrench KV32101500 J-36777-1 Ignition Timing Coil Adapt. KV10900010
J-28815 Hub Nut Socket KV40102500 J-36777-1 Ignition Timing Adapter Coil KV109D0010
J-28817 Steering Gear Holder KV48102100 J-36777-3 Adapter Harness KV99106300
J-28817 Steering Gear Holder KV48102200 J-36777-4 Adapter Harness KV10114200
J-28818 Rear Housing Locknut Wr. KV48101600 J-37068 Transmission Holding Fixture ST07870000
J-28819 Rear Cover Wrench KV48101700 J-37140-A Oil Filter Wrench KV10115800
J-28820 Cylinder Locknut Spanner KV48101800 J-37228 Seal Cutter KV10111100
J-28820 Cylinder Locknut Spanner KV48102300 J-37368 ECCS Checker KV10900020
J-28821 Cylinder Holder KV48101900 J-37959 Ignition Timing Harness EG11170000
J-28823 Clutch Hub Puller KV99412306 J-37959 VG30E EG11170000
J-28831-A Injection Pump Gear Puller ST19530000 J-38139 Main Bearing Cap Remover KV10114700
J-29751 Locknut Wrench KV99235160 J-38198 Rear Bushing Remover
J-33201-A Preload Wrench KV38105900 & Installer ST38280000
J-33207 Pulley Puller Pilot KV994C5782 J-38365 Oxygen Sensor Wrench KV10114400
J-33212 Seal Protector KV994C5784 J-38381 Air Bag Deployment Kit KV99106400
J-33213 Clutch Alignment Arbor KV30101000 J-38381-35 Deployment tool KV99108300
J-33902 Blind Cover Set KV99241420 J-38381-50 Deployment tool KV99108200
J-33902 Blind Cover Set KV994C154 J-38381-65 Deployment Tool Adapter N/A
J-33902 Blind Cover Set KV994C155 J-38381-70 Deployment Tool Adapter N/A
J-33903 DISC Cylinder Liner Puller ST10300000 J-38387 Belt Tension Gauge EG14860000
J-33904 Differential Side Oil J-38874 Clutch Disc Wrench KV99106100
Seal Protector KV38105500 J-38879-A Fuel Tank Lock Ring Socket KV999G0010
J-33914 Pressure Gauge Adapter KV48102500 J-38955 Valve Oil Seal Inst. KV10116300
J-33920 Gauge Block KV38103910 J-38958 Intake Valve Seal Inst. KV10115600
J-33923 Clutch Hub Puller KV99232232 J-38959 Valve Lipseal Remover KV10107902
J-33944-A Clutch Hub Puller KV99232340 J-38959 Valve Seal Puller Holder KV10116100
J-33984-A Radiator Cap Test Adapter EG17650301 J-38972 Camshaft Lifter Stopper Set KV10115150
J-34263 Oil Seal Installer KV48103000 J-38972-1 Camshaft Pliers KV10115110
J-34264 Oil Seal Installer KV48103100 J-38972-2 Lifter Stopper KV10115120
J-34270 Trans Cable Harness KV319K0010 J-38982 Drive Handle Drift KV31103000
J-34273 Diagnostic Sub-Harness KV999V0010 J-39026 Preload Adapter KV38105710
J-34274 Oil Filter Wrench (80 mm) KV10105900 J-39027 Preload Adapter KV38107700
J-34282 Pressure Gauge Adapter KV31101200 J-39071 Filler Cap Adapter KV99104300

To order Special Service Tools call 1-800-662-2001 109


Kent-Moore to Nissan No.
Cross-Reference Index
KENT-MOORE NO. DESCRIPTION NISSAN NO. KENT-MOORE NO. DESCRIPTION NISSAN NO.
J-39186 Clutch Spring Compressor KV31103200 N/A Commercial Socket Adapter HT62900000
J-39528 F.A.S. Pressure Gauge KV991V0010 N/A Commercial Socket Adapter HT62940000
J-39773 Valve Spring Compression KV10110600 N/A Commercial Spring Compressor HT71780000
J-39883 Pre-load Adapter KV38105210 N/A Commercial Wheel Alignment Attachment IM23600800
J-41128 Test Harness KV16845585 N/A Commercial Engine Attachment Assembly KV10105001
J-41306 HICAS Spacer KV40106300 N/A Commercial Engine Attachment Assembly KV10106500
J-44230 Deployment Tool KV99109000 N/A Commercial Engine Stand Shaft KV101065001
J-44321 Fuel pressure Check Adapter KV10117600 N/A Commercial Valve Lipseal Drift KV10107501
J-44716 Ring gear stopper KV10117700 N/A Commercial Valve Spring Compressor KV10111300
J-45073 Bearing Puller Set 9999500056 N/A Commercial Attachment KV10111400
J-45073 Rear Axle Bearing Puller Kit HT72210000 N/A Commercial Engine Attachment Assembly KV10114300
J-45073 Rear Axle Bearing Puller Kit HT72480000 N/A Commercial Valve Oil Seal Installer KV10115000
J-45073 Bearing Puller Set ST37120000 N/A Commercial Engine Stand Adpt. KV10117000
J-45073 Bearing Puller Set ST37120001 N/A Commercial Valve Oil Seal Drift KV109B0010
J-45073 Bearing Puller Set ST37130000 N/A Commercial Transmission Press Stand KV31100401
J-45073 Bearing Puller Set ST37140000 N/A Commercial Rear Axle Seal Installer KV37710000
J-45073 Bearing Puller Set ST37140001 N/A Commercial Oil Seal Installer KV38100200
J-45073 Bearing Puller Set ST37160000 N/A Commercial Pilot Bearing Remover KV38100401
J-45073-1 Bearing Locknut Wrench ST38020000 N/A Commercial Front Oil Seal Installer KV38100500
J-45073-7 Axle Bearing Puller Jaws 9999500032 N/A Commercial Drift KV38102510
J-8037 Piston Ring Comp. EM03470000 N/A Commercial Tube Pressor KV39930000
J-8059 Snap Ring Pliers ST25310000 N/A Commercial Axle Stand KV40104100
J-8059 Snap Ring Pliers ST25320001 N/A Commercial Final Mounting Insulator Tool KV40104710
J-8062 Valve Spring Compressor ST12070000 N/A Commercial Suspension Member Rem. & Inst. KV401052S0
J-8062 Valve Spring Compressor ST12072000 N/A Commercial Clutch Hub Holder KV99231010
J-8107-2 Side Bearing Puller Pilot 9999500084 N/A Commercial Clutch Holding Wrench KV99231162
J-8107-2 Side Bearing Puller Pilot ST33061000 N/A Commercial Pulley Installer KV99234160
J-9392-01 Seal Remover & Inst. KV99412321 N/A Commercial Pulley Installer KV99234330
J-9393-A Seal Remover & Inst. KV99412320 N/A Commercial Shaft Seal R & I KV99235140
N/A Ignition Timing Harness EG11140000 N/A Commercial Shaft Seal Protector KV99267420
N/A Ignition Coil Adapter Harness EG11160000 N/A Commercial Charging Adapter KV994C1552
N/A Oil Pres. Gauge Adapter KV31101201 N/A Commercial Clutch Disc Wrench KV99845991
N/A Torque Converter One-Way KV31102100 N/A Commercial Clutch Disc Puller KV99859981
N/A Drive Pinion Flange Wrench KV31520000 N/A Commercial Clutch Disc Puller KV998VR001
N/A Front Oil Seal Installer KV38103800 N/A Commercial Engine Stand ST0501S000
N/A Preload Adapter KV38107300 N/A Commercial Drift ST23860000
N/A Bearing Race Drift KV401021S0 N/A Commercial Puller ST30037000
N/A Locknut Wrench KV48102000 N/A Commercial Side Bearing Race Inst. ST30633000
N/A Rack Seal Ring Reformer KV48104400 N/A Commercial Side Bearing Inst. ST33220000
N/A Rack Seal Ring Inst. KV48104400 N/A Commercial Side Oil Seal Installer ST33720000
N/A Clutch Holding Wrench KV99103900 N/A Commercial Drift ST35321000
N/A Oil Pressure Adapter Set KV991044S0 N/A Commercial Strut Attachment ST35652000
N/A Pulley Inst. KV99106200 N/A Commercial Drift ST37830000
N/A A.B.S. Checker KV999P1000 N/A Commercial Tube Presser WS39930000
N/A A.B.S. Checker Adapter Harness KV999P1010 N/A J-33986 Valve Spring Compressor KV10109210
N/A A.B.S. Checker Adapter Harness KV999P1020 Srv. Part To J-34301 Oil Pressure Gauge Hose ST25052000
N/A Attachment Board (Lifts) LM40860200 Joint Pipe Adapter KV31103600
N/A Safety Stand (Lifts) LM45190000 Idler Gear Installer ST36730000
N/A Base Plate ST20050010
N/A Distance Piece ST20050100
N/A Diaphragm Spring
Adjusting Wrench ST20050240
N/A Adapter Setting Plate ST23810001
N/A Mainshaft Front Brg Inst ST30720000
N/A Pinion Height/Bearing
Preload Gauge ST3127S000
N/A Commercial Flare Nut Torque Wrench GG9431000
N/A Commercial Slide Hammer HT2400000
N/A Commercial Ball Joint Remover HT2750000

110 Nissan / Infiniti Special Service Tools


Index
TOOL NO. PAGE NO. TOOL NO. PAGE NO. TOOL NO. PAGE NO.
6143 . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 J-5902-O1. . . . . . . . . . . . . . . . . . . . . . . 14 J-23518-O1. . . . . . . . . . . . . . . . . . . . . . 62
6147 . . . . . . . . . . . . . . . . . . . . . . . . 82, 86 J-6083. . . . . . . . . . . . . . . . . . . . . . . . . . 90 J-23530-A. . . . . . . . . . . . . . . . . . . . . . . 62
7100 . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 J-6105. . . . . . . . . . . . . . . . . . . . . . . . . . 40 J-23575-B. . . . . . . . . . . . . . . . . . . . 30, 40
7208 . . . . . . . . . . . . . . . . . . . . . . . . 70, 76 J-6125-1B. . . . . . . . . . . . . . . . . . . . . . . 90 J-23672. . . . . . . . . . . . . . . . . . . . . . . . . 93
7224 . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 J-6125-B. . . . . . . . . . . . . . . . . . . . . . . . 90 J-23688. . . . . . . . . . . . . . . . . . . . . . . . . 15
7379 . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 J-6435. . . . . . . . . . . . . . . . . . . . . . . . . . 90 J-23738-A. . . . . . . . . . . . . . . . . . . . . . . 27
8003 . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 J-6471-O2. . . . . . . . . . . . . . . . . . . . . . . 90 J-23770. . . . . . . . . . . . . . . . . . . . . . . . . 62
8005 . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 J-6627-A. . . . . . . . . . . . . . . . . . . . . . . . 70 J-23907 . . . . . . . . . . . . . . . . . . . 15, 48, 93
8006 . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 J-7057. . . . . . . . . . . . . . . . . . . . . . . . . . 90 J-23907-3 . . . . . . . . . . . . . . . . . . . . . . . 48
8007 . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 J-7079-2 . . . . . . . . . . . . . . . . . . . . . . . . 90 J-24095. . . . . . . . . . . . . . . . . . . . . . 30, 41
8008 . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 J-7108. . . . . . . . . . . . . . . . . . . . . . . . . . 91 J-24182-2A . . . . . . . . . . . . . . . . 30, 34, 41
8010 . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 J-7624. . . . . . . . . . . . . . . . . . . . . . . 40, 62 J-24239-O1. . . . . . . . . . . . . . . . . . . . . . 16
8013 . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 J-7754-C. . . . . . . . . . . . . . . . . . . . . . . . 91 J-24319-B . . . . . . . . . . . . . . . . . 63, 70, 93
8015 . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 J-7872. . . . . . . . . . . . . . . . . . . . . . . . . . 91 J-24364-C . . . . . . . . . . . . . . . . . . . . 30, 41
8017 . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 J-8001. . . . . . . . . . . . . . . . . . . . . . . . . . 91 J-24402-A. . . . . . . . . . . . . . . . . . . . . . . 71
8018 . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 J-8001-M . . . . . . . . . . . . . . . . . . . . 76, 91 J-24405. . . . . . . . . . . . . . . . . . . . . . . . . 93
8022 . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 J-8037. . . . . . . . . . . . . . . . . . . . . . . . . . 14 J-24406. . . . . . . . . . . . . . . . . . . . . . . . . 94
21166-INF. . . . . . . . . . . . . . . . . . . . . . . 88 J-8039-A. . . . . . . . . . . . . . . . . . . . . . . . 91 J-24407. . . . . . . . . . . . . . . . . . . . . . . . . 94
31609 . . . . . . . . . . . . . . . . . . . . . . . . . . 13 J-8049. . . . . . . . . . . . . . . . . . . . . . . . . . 62 J-24460-O1. . . . . . . . . . . . . . . . . . . . . . 16
205049 . . . . . . . . . . . . . . . . . . . . . . . . . 13 J-8059. . . . . . . . . . . . . . . . . . . . . . . . . . 91 J-24641-A. . . . . . . . . . . . . . . . . . . . . . . 41
222484 . . . . . . . . . . . . . . . . . . . . . . . . . . 1 J-8062. . . . . . . . . . . . . . . . . . . . . . . . . . 14 J-24709-O1. . . . . . . . . . . . . . . . . . . . . . 71
871207 . . . . . . . . . . . . . . . . . . . . . . . . . . 1 J-8068. . . . . . . . . . . . . . . . . . . . . . . . . . 92 J-24878-2 . . . . . . . . . . . . . . . . . . . . . . . 41
892583 . . . . . . . . . . . . . . . . . . . . . . . . . . 1 J-8087. . . . . . . . . . . . . . . . . . . . . . . . . . 14 J-24878-4 . . . . . . . . . . . . . . . . . . . . . . . 41
AC-85 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 J-8089. . . . . . . . . . . . . . . . . . . . . . . . . . 14 J-25070. . . . . . . . . . . . . . . . . . . . . . . . . 71
AE-6160 . . . . . . . . . . . . . . . . . . . . . . . . . 1 J-8092. . . . . . . . . . . . . . . . . . . . . . . . . . 92 J-25087-C. . . . . . . . . . . . . . . . . . . . . . . 16
BT-1118 . . . . . . . . . . . . . . . . . . . . . . . . . 1 J-8107-2 . . . . . . . . . . . . . . . . . . . . . . . . 76 J-25225. . . . . . . . . . . . . . . . . . . . . . . . . 16
BT-3373-F. . . . . . . . . . . . . . . . . . . . . . . 13 J-8433 . . . . . . . . . . . . . . . . . 40, 70, 76, 92 J-25267. . . . . . . . . . . . . . . . . . . . . . . . . 77
BT-3386-FVT . . . . . . . . . . . . . . . . . . . . 13 J-8592. . . . . . . . . . . . . . . . . . . . . . . . . . 92 J-25273. . . . . . . . . . . . . . . . . . . . . . . . . 77
BT-7308 . . . . . . . . . . . . . . . . . . . . . . . . . 1 J-8943-O1. . . . . . . . . . . . . . . . . . . . . . . 70 J-25300-202 . . . . . . . . . . . . . . . . . . . . . 71
BT-7707-A . . . . . . . . . . . . . . . . . . . . . . . 2 J-9392-O1. . . . . . . . . . . . . . . . . . . . . . . 40 J-25300-203 . . . . . . . . . . . . . . . . . . . . . 71
BT-8034-B . . . . . . . . . . . . . . . . . . . . . . . 2 J-9393-A. . . . . . . . . . . . . . . . . . . . . . . . 40 J-25300-204 . . . . . . . . . . . . . . . . . . . . . 71
BT-8639-B . . . . . . . . . . . . . . . . . . . . . . . 2 J-9666. . . . . . . . . . . . . . . . . . . . . . . . . . 14 J-25300-D. . . . . . . . . . . . . . . . . . . . . . . 71
BT-8653-A . . . . . . . . . . . . . . . . . . . . . . 13 J-21008-A. . . . . . . . . . . . . . . . . . . . . . . . 2 J-25310. . . . . . . . . . . . . . . . . . . . . . 63, 94
J-544-O1. . . . . . . . . . . . . . . . . . . . . . . . 88 J-21177-A. . . . . . . . . . . . . . . . . . . . . . . 62 J-25359-C. . . . . . . . . . . . . . . . . . . . . . . 94
J-1313-B. . . . . . . . . . . . . . . . . . . . . . . . 88 J-21350. . . . . . . . . . . . . . . . . . . . . . . . . 15 J-25472. . . . . . . . . . . . . . . . . . . . . . . . . 41
J-1859-A. . . . . . . . . . . . . . . . . . . . . . . . 88 J-21465-13 . . . . . . . . . . . . . . . . . . . . . . 92 J-25523. . . . . . . . . . . . . . . . . . . . . . . . . 77
J-2619-O1. . . . . . . . . . . . . . . . . . . . . . . 88 J-21472. . . . . . . . . . . . . . . . . . . . . . . . . 62 J-25604-O1. . . . . . . . . . . . . . . . . . . . . . 77
J-3172. . . . . . . . . . . . . . . . . . . . . . . . . . 88 J-22132-O2. . . . . . . . . . . . . . . . . . . 30, 40 J-25615-O1. . . . . . . . . . . . . . . . . . . . . . 16
J-3289-20 . . . . . . . . . . . . . . . . . . . . 70, 76 J-22610. . . . . . . . . . . . . . . . . . . . . . . . . 92 J-25618-O2. . . . . . . . . . . . . . . . . . . . . . 16
J-3936-O3. . . . . . . . . . . . . . . . . . . . . . . 13 J-22700. . . . . . . . . . . . . . . . . . . . . . . . . 15 J-25640-B. . . . . . . . . . . . . . . . . . . . . . . 16
J-4245. . . . . . . . . . . . . . . . . . . . . . . . . . 88 J-22738-O2. . . . . . . . . . . . . . . . . . . . . . 15 J-25660-C. . . . . . . . . . . . . . . . . . . . . . . 17
J-4646. . . . . . . . . . . . . . . . . . . . . . . . . . 89 J-22775. . . . . . . . . . . . . . . . . . . . . . . . . 15 J-25678-O1. . . . . . . . . . . . . . . . . . . . . . 48
J-4757. . . . . . . . . . . . . . . . . . . . . . . . . . 89 J-22794. . . . . . . . . . . . . . . . . . . . . . . . . 15 J-25679-O1. . . . . . . . . . . . . . . . . . . . . . 48
J-4880. . . . . . . . . . . . . . . . . . . . . . . . . . 89 J-22888-20A . . . . . . . . . . . . . . . . . . 76, 93 J-25681. . . . . . . . . . . . . . . . . . . . . . 48, 94
J-5207. . . . . . . . . . . . . . . . . . . . . . . . . . 89 J-22888-D. . . . . . . . . . . . . . . . . . . . 76, 92 J-25689-A. . . . . . . . . . . . . . . . . . . . . . . 48
J-5347-B. . . . . . . . . . . . . . . . . . . . . . . . 14 J-22912-O1 . . . . . . . . . . . . . . . . 48, 77, 93 J-25691-O1. . . . . . . . . . . . . . . . . . . . . . 49
J-5403. . . . . . . . . . . . . . . . . . . . . . . . . . 89 J-23409. . . . . . . . . . . . . . . . . . . . . . . . . 93 J-25721-A. . . . . . . . . . . . . . . . . . . . . . . 53
J-5586-A. . . . . . . . . . . . . . . . . . . . . . . . 89 J-23433. . . . . . . . . . . . . . . . . . . . . . . . . 27 J-25726-B. . . . . . . . . . . . . . . . . . . . . . . 63
J-5853-C. . . . . . . . . . . . . . . . . . . . . . . . 89 J-23498-A. . . . . . . . . . . . . . . . . . . . 70, 77 J-25730-B. . . . . . . . . . . . . . . . . . . . . . . 72

To order Special Service Tools call 1-800-662-2001 111


Index
TOOL NO. PAGE NO. TOOL NO. PAGE NO. TOOL NO. PAGE NO.
J-25749-A. . . . . . . . . . . . . . . . . . . . . . . 77 J-28431-6 . . . . . . . . . . . . . . . . . . . . . . . 18 J-33902. . . . . . . . . . . . . . . . . . . . . . . . . 43
J-25765-B. . . . . . . . . . . . . . . . . . . . . . . 78 J-28434. . . . . . . . . . . . . . . . . . . . . . . . . 64 J-33904. . . . . . . . . . . . . . . . . . . . . . . . . 57
J-25774-A. . . . . . . . . . . . . . . . . . . . . . . 78 J-28509-A. . . . . . . . . . . . . . . . . . . . . . . 96 J-33906. . . . . . . . . . . . . . . . . . . . . . . . . 19
J-25803-O1. . . . . . . . . . . . . . . . . . . . . . 78 J-28527. . . . . . . . . . . . . . . . . . . . . . . . . 64 J-33907. . . . . . . . . . . . . . . . . . . . . . . . . 20
J-25825-A. . . . . . . . . . . . . . . . . . . . . . . 72 J-28585. . . . . . . . . . . . . . . . . . . . . . . . . 96 J-33914. . . . . . . . . . . . . . . . . . . . . . . . . 66
J-25863-O1. . . . . . . . . . . . . . . . . . . 49, 78 J-28662. . . . . . . . . . . . . . . . . . . . . . . . . 64 J-33915. . . . . . . . . . . . . . . . . . . . . . . . . . 2
J-26010-O1. . . . . . . . . . . . . . . . . . . . . . 78 J-28667-A. . . . . . . . . . . . . . . . . . . . . . . 96 J-33923. . . . . . . . . . . . . . . . . . . . . . . . . 43
J-26072. . . . . . . . . . . . . . . . . . . . . . . . . 42 J-28804. . . . . . . . . . . . . . . . . . . . . . . . . 49 J-33927. . . . . . . . . . . . . . . . . . . . . . . . . 43
J-26082. . . . . . . . . . . . . . . . . . . . . . . . . 78 J-28815. . . . . . . . . . . . . . . . . . . . . . 64, 79 J-33928. . . . . . . . . . . . . . . . . . . . . . . . . 79
J-26083. . . . . . . . . . . . . . . . . . . . . . . . . 72 J-28817. . . . . . . . . . . . . . . . . . . . . . . . . 64 J-33930. . . . . . . . . . . . . . . . . . . . . . . . . 27
J-26089. . . . . . . . . . . . . . . . . . . . . . . . . 78 J-28817-6 . . . . . . . . . . . . . . . . . . . . . . . 64 J-33939. . . . . . . . . . . . . . . . . . . . . . . . . 43
J-26090. . . . . . . . . . . . . . . . . . . . . . . . . 79 J-28818. . . . . . . . . . . . . . . . . . . . . . . . . 65 J-33984-50 . . . . . . . . . . . . . . . . . . . . . . 20
J-26091. . . . . . . . . . . . . . . . . . . . . . . . . 79 J-28819. . . . . . . . . . . . . . . . . . . . . . . . . 65 J-33984-A. . . . . . . . . . . . . . . . . . . . . . . 20
J-26092. . . . . . . . . . . . . . . . . . . . . . . . . 79 J-28820. . . . . . . . . . . . . . . . . . . . . . . . . 65 J-34100. . . . . . . . . . . . . . . . . . . . . . . . . 84
J-26095. . . . . . . . . . . . . . . . . . . . . . . . . 17 J-28821. . . . . . . . . . . . . . . . . . . . . . . . . 65 J-34142-B. . . . . . . . . . . . . . . . . . . . . . . . 2
J-26335. . . . . . . . . . . . . . . . . . . . . . . . . 79 J-28822. . . . . . . . . . . . . . . . . . . . . . . . . 65 J-34186. . . . . . . . . . . . . . . . . . . . . . . . . . 2
J-26336-20 . . . . . . . . . . . . . . . . . . . . . . 17 J-28826. . . . . . . . . . . . . . . . . . . . . . . . . 18 J-34262. . . . . . . . . . . . . . . . . . . . . . . . . 53
J-26336-B. . . . . . . . . . . . . . . . . . . . . . . 17 J-28829. . . . . . . . . . . . . . . . . . . . . . . . . 18 J-34263. . . . . . . . . . . . . . . . . . . . . . . . . 66
J-26340-100 . . . . . . . . . . . . . . . . . . . . . 17 J-28830-15 . . . . . . . . . . . . . . . . . . . . . . 19 J-34264. . . . . . . . . . . . . . . . . . . . . . . . . 66
J-26340-A. . . . . . . . . . . . . . . . . . . . . . . 17 J-28830-A. . . . . . . . . . . . . . . . . . . . . . . 18 J-34267. . . . . . . . . . . . . . . . . . . . . . . . . . 3
J-26347-A. . . . . . . . . . . . . . . . . . . . . . . 27 J-28831-A. . . . . . . . . . . . . . . . . . . . . . . 19 J-34270. . . . . . . . . . . . . . . . . . . . . . . . . 53
J-26348. . . . . . . . . . . . . . . . . . . . . . . . . 49 J-28894. . . . . . . . . . . . . . . . . . . . . . . . . 49 J-34273. . . . . . . . . . . . . . . . . . . . . . . . . . 3
J-26349-A. . . . . . . . . . . . . . . . . . . . . . . 49 J-28895. . . . . . . . . . . . . . . . . . . . . . . . . 65 J-34274. . . . . . . . . . . . . . . . . . . . . . . . . 20
J-26357. . . . . . . . . . . . . . . . . . . . . . . . . 63 J-29107-A. . . . . . . . . . . . . . . . . . . . 72, 79 J-34275. . . . . . . . . . . . . . . . . . . . . . . . . 20
J-26357-10 . . . . . . . . . . . . . . . . . . . . . . 63 J-29369. . . . . . . . . . . . . . . . . . . . . . 50, 53 J-34279. . . . . . . . . . . . . . . . . . . . . . . . . 57
J-26363-B. . . . . . . . . . . . . . . . . . . . . . . 72 J-29532. . . . . . . . . . . . . . . . . . . . . . . . . 65 J-34282. . . . . . . . . . . . . . . . . . . . . . . . . 57
J-26364. . . . . . . . . . . . . . . . . . . . . . . . . 63 J-29545-6A. . . . . . . . . . . . . . . . . . . . . . 19 J-34284. . . . . . . . . . . . . . . . . . . . . . . . . 57
J-26365-A. . . . . . . . . . . . . . . . . . . . . . . 17 J-29653-A. . . . . . . . . . . . . . . . . . . . . . . 27 J-34285-A. . . . . . . . . . . . . . . . . . . . . . . 58
J-26366. . . . . . . . . . . . . . . . . . . . . . . . . 49 J-29661. . . . . . . . . . . . . . . . . . . . . . . . . 19 J-34286. . . . . . . . . . . . . . . . . . . . . . . . . 58
J-26367. . . . . . . . . . . . . . . . . . . . . . . . . 63 J-29751. . . . . . . . . . . . . . . . . . . . . . . . . 42 J-34286-10 . . . . . . . . . . . . . . . . . . . . . . 60
J-26369. . . . . . . . . . . . . . . . . . . . . . . . . 64 J-29763. . . . . . . . . . . . . . . . . . . . . . . . . 19 J-34287. . . . . . . . . . . . . . . . . . . . . . . . . 43
J-26400-1B. . . . . . . . . . . . . . . . . . . . . . 18 J-29803-A. . . . . . . . . . . . . . . . . . . . . . . 97 J-34291-B. . . . . . . . . . . . . . . . . . . . . . . 58
J-26549-E . . . . . . . . . . . . . . . . . . . . . . . 42 J-29836. . . . . . . . . . . . . . . . . . . . . . . . . 97 J-34296-1 . . . . . . . . . . . . . . . . . . . . . . . 58
J-26568. . . . . . . . . . . . . . . . . . . . . . . . . 18 J-29843. . . . . . . . . . . . . . . . . . . . . . . . . 97 J-34297-1 . . . . . . . . . . . . . . . . . . . . . . . 58
J-26695-5 . . . . . . . . . . . . . . . . . . . . 30, 34 J-29844. . . . . . . . . . . . . . . . . . . . . . . . . 97 J-34298. . . . . . . . . . . . . . . . . . . . . . 20, 58
J-26744-A. . . . . . . . . . . . . . . . . . . . . . . 53 J-29884. . . . . . . . . . . . . . . . . . . . . . . . . 42 J-34300-I97ND. . . . . . . . . . . . . . . . . . . 84
J-26900-1 . . . . . . . . . . . . . . . . . . . . . . . 94 J-29890-5 . . . . . . . . . . . . . . . . . . . . . . . 42 J-34300-I97RK . . . . . . . . . . . . . . . . . . . 84
J-26900-2 . . . . . . . . . . . . . . . . . . . . . . . 95 J-29895. . . . . . . . . . . . . . . . . . . . . . . . . 50 J-34300-I97TBF . . . . . . . . . . . . . . . . . . 84
J-26900-3 . . . . . . . . . . . . . . . . . . . . . . . 95 J-33013-B. . . . . . . . . . . . . . . . . . . . . . . 42 J-34300-N97ND . . . . . . . . . . . . . . . . . . 84
J-26900-4 . . . . . . . . . . . . . . . . . . . . . . . 95 J-33032. . . . . . . . . . . . . . . . . . . . . . . . . 50 J-34300-N97RK . . . . . . . . . . . . . . . . . . 84
J-26900-5 . . . . . . . . . . . . . . . . . . . . . . . 95 J-33049. . . . . . . . . . . . . . . . . . . . . . . . . 19 J-34300-N97TBF . . . . . . . . . . . . . . . . . 84
J-26900-6 . . . . . . . . . . . . . . . . . . . . . . . 95 J-33067. . . . . . . . . . . . . . . . . . . . . . 57, 72 J-34301-ADPT . . . . . . . . . . . . . . . . . . . 54
J-26900-7 . . . . . . . . . . . . . . . . . . . . . . . 96 J-33163-1 . . . . . . . . . . . . . . . . . . . . 50, 53 J-34301-C. . . . . . . . . . . . . . . . . . . . . . . 54
J-26900-8 . . . . . . . . . . . . . . . . . . . . . . . 96 J-33163-2 . . . . . . . . . . . . . . . . . . . . 50, 53 J-34305. . . . . . . . . . . . . . . . . . . . . . . . . 50
J-26900-9 . . . . . . . . . . . . . . . . . . . . . . . 96 J-33179. . . . . . . . . . . . . . . . . . . . . . . . . 97 J-34308. . . . . . . . . . . . . . . . . . . . . . . . . 54
J-26900-12 . . . . . . . . . . . . . . . . . . . . . . 94 J-33201-A. . . . . . . . . . . . . . . . . . . . . . . 57 J-34311. . . . . . . . . . . . . . . . . . . . . . . . . 80
J-26900-13 . . . . . . . . . . . . . . . . . . . . . . 95 J-33202. . . . . . . . . . . . . . . . . . . . . . . . . 57 J-34312. . . . . . . . . . . . . . . . . . . . . . . . . 80
J-26900-14 . . . . . . . . . . . . . . . . . . . . . . 95 J-33212. . . . . . . . . . . . . . . . . . . . . . . . . 42 J-34328. . . . . . . . . . . . . . . . . . . . . . . . . 51
J-28428-E . . . . . . . . . . . . . . . . . . . . 18, 96 J-33213. . . . . . . . . . . . . . . . . . . . . . . . . 50 J-34331. . . . . . . . . . . . . . . . . . . . . . . . . 51

112 Nissan / Infiniti Special Service Tools


Index
TOOL NO. PAGE NO. TOOL NO. PAGE NO. TOOL NO. PAGE NO.
J-34332. . . . . . . . . . . . . . . . . . . . . . . . . 51 J-36796. . . . . . . . . . . . . . . . . . . . . . . . . 73 J-38752-A. . . . . . . . . . . . . . . . . . . . . . . . 6
J-34335. . . . . . . . . . . . . . . . . . . . . . . . . 51 J-36843. . . . . . . . . . . . . . . . . . . . . . 30, 43 J-38792. . . . . . . . . . . . . . . . . . . . . . . . . . 6
J-34339. . . . . . . . . . . . . . . . . . . . . . . . . 51 J-36846. . . . . . . . . . . . . . . . . . . . . . 31, 43 J-38792-25 . . . . . . . . . . . . . . . . . . . . . . . 6
J-34342. . . . . . . . . . . . . . . . . . . . . . . . . 51 J-36847. . . . . . . . . . . . . . . . . . . . . . . . . 44 J-38800-B . . . . . . . . . . . . . . . . . 32, 34, 44
J-34481. . . . . . . . . . . . . . . . . . . . . . . . . 97 J-36850. . . . . . . . . . . . . . . . . . . . . . 52, 54 J-38873. . . . . . . . . . . . . . . . . . . . . . . . . 45
J-34636. . . . . . . . . . . . . . . . . . . . . . . . . . 3 J-36854. . . . . . . . . . . . . . . . . . . . . . . . . 22 J-38874. . . . . . . . . . . . . . . . . . . . . . . . . 45
J-34673. . . . . . . . . . . . . . . . . . . . . . . . . 97 J-37066. . . . . . . . . . . . . . . . . . . . . . . . . 54 J-38879-A. . . . . . . . . . . . . . . . . . . . . . . 23
J-34700-10 . . . . . . . . . . . . . . . . . . . . . . 85 J-37067. . . . . . . . . . . . . . . . . . . . . . . . . 54 J-38955. . . . . . . . . . . . . . . . . . . . . . . . . 23
J-34755. . . . . . . . . . . . . . . . . . . . . . . . . 85 J-37068. . . . . . . . . . . . . . . . . . . . . . . . . 54 J-38957. . . . . . . . . . . . . . . . . . . . . . . . . 23
J-34764-A. . . . . . . . . . . . . . . . . . . . . . . . 3 J-37140-A. . . . . . . . . . . . . . . . . . . . . . . 22 J-38958. . . . . . . . . . . . . . . . . . . . . . . . . 23
J-34898. . . . . . . . . . . . . . . . . . . . . . . . . . 3 J-37228. . . . . . . . . . . . . . . . . . . . . . . . . 22 J-38971. . . . . . . . . . . . . . . . . . . . . . . . . 23
J-35356. . . . . . . . . . . . . . . . . . . . . . . . . 20 J-37296. . . . . . . . . . . . . . . . . . . . . . . . . 55 J-38972. . . . . . . . . . . . . . . . . . . . . . . . . 23
J-35357. . . . . . . . . . . . . . . . . . . . . . . . . 21 J-37296-1 . . . . . . . . . . . . . . . . . . . . . . . 55 J-38981. . . . . . . . . . . . . . . . . . . . . . . . . 55
J-35357-4 . . . . . . . . . . . . . . . . . . . . . . . 21 J-37296-2 . . . . . . . . . . . . . . . . . . . . . . . 55 J-38982. . . . . . . . . . . . . . . . . . . . . . . . . 55
J-35550. . . . . . . . . . . . . . . . . . . . . . . . . 85 J-37368-A. . . . . . . . . . . . . . . . . . . . . . . . 5 J-39021. . . . . . . . . . . . . . . . . . . . . . . . . . 6
J-35555. . . . . . . . . . . . . . . . . . . . . . . . . 27 J-37959. . . . . . . . . . . . . . . . . . . . . . . . . . 5 J-39026. . . . . . . . . . . . . . . . . . . . . . . . . 55
J-35590. . . . . . . . . . . . . . . . . . . . . . . . . . 3 J-37990. . . . . . . . . . . . . . . . . . . . . . . . . 22 J-39027. . . . . . . . . . . . . . . . . . . . . . 52, 55
J-35615. . . . . . . . . . . . . . . . . . . . . . . . . . 3 J-38100-3 . . . . . . . . . . . . . . . . . . . . 31, 44 J-39037. . . . . . . . . . . . . . . . . . . . . . . . . 34
J-35622. . . . . . . . . . . . . . . . . . . . . . . . . 66 J-38100-10A . . . . . . . . . . . . . . . . . . 31, 44 J-39071. . . . . . . . . . . . . . . . . . . . . . . . . 73
J-35667-A. . . . . . . . . . . . . . . . . . . . . . . 21 J-38100-24A. . . . . . . . . . . . . . . . . . . . . 31 J-39072. . . . . . . . . . . . . . . . . . . . . . . . . 45
J-35805. . . . . . . . . . . . . . . . . . . . . . . . . 85 J-38100-25A. . . . . . . . . . . . . . . . . . . . . 31 J-39183-C. . . . . . . . . . . . . . . . . . . . . . . 34
J-35810. . . . . . . . . . . . . . . . . . . . . . . . . 85 J-38100-26A. . . . . . . . . . . . . . . . . . . . . 31 J-39186. . . . . . . . . . . . . . . . . . . . . . . . . 56
J-35864. . . . . . . . . . . . . . . . . . . . . . . . . 60 J-38100-30 . . . . . . . . . . . . . . . . . . . 32, 44 J-39200. . . . . . . . . . . . . . . . . . . . . . . . . . 6
J-35865. . . . . . . . . . . . . . . . . . . . . . . . . 60 J-38100-130 . . . . . . . . . . . . . . . . . . . . . 31 J-39349. . . . . . . . . . . . . . . . . . . . . . . . . . 7
J-35866. . . . . . . . . . . . . . . . . . . . . . . . . 60 J-38100-577 . . . . . . . . . . . . . . . . . . . . . 32 J-39351. . . . . . . . . . . . . . . . . . . . . . . . . 80
J-35867. . . . . . . . . . . . . . . . . . . . . . . . . 60 J-38139. . . . . . . . . . . . . . . . . . . . . . . . . 22 J-39352. . . . . . . . . . . . . . . . . . . . . . . . . 80
J-35868. . . . . . . . . . . . . . . . . . . . . . . . . 60 J-38185. . . . . . . . . . . . . . . . . . . . . . . . . 98 J-39353. . . . . . . . . . . . . . . . . . . . . . . . . 80
J-35869. . . . . . . . . . . . . . . . . . . . . . . . . 60 J-38187. . . . . . . . . . . . . . . . . . . . . . . . . 22 J-39383-A. . . . . . . . . . . . . . . . . . . . . . . 28
J-35870. . . . . . . . . . . . . . . . . . . . . . 21, 61 J-38198. . . . . . . . . . . . . . . . . . . . . . . . . 73 J-39386. . . . . . . . . . . . . . . . . . . . . . . . . 24
J-35871. . . . . . . . . . . . . . . . . . . . . . . . . 61 J-38218. . . . . . . . . . . . . . . . . . . . . . . . . 98 J-39387. . . . . . . . . . . . . . . . . . . . . . . . . . 7
J-35892. . . . . . . . . . . . . . . . . . . . . . . . . . 4 J-38219. . . . . . . . . . . . . . . . . . . . . . 82, 98 J-39401-A. . . . . . . . . . . . . . . . . . . . . . . . 7
J-35917. . . . . . . . . . . . . . . . . . . . . . . . . 72 J-38365-A. . . . . . . . . . . . . . . . . . . . . . . 28 J-39475. . . . . . . . . . . . . . . . . . . . . . 33, 45
J-35995. . . . . . . . . . . . . . . . . . . . . . . . . 66 J-38381-35 . . . . . . . . . . . . . . . . . . . . . . 82 J-39500-10 . . . . . . . . . . . . . . . . . . . 33, 34
J-36169-A. . . . . . . . . . . . . . . . . . . . . . . . 4 J-38381-50 . . . . . . . . . . . . . . . . . . . . . . 82 J-39500-20A. . . . . . . . . . . . . . . . . . . . . 35
J-36267. . . . . . . . . . . . . . . . . . . . . . . . . 51 J-38381-65 . . . . . . . . . . . . . . . . . . . . . . 82 J-39500-24A. . . . . . . . . . . . . . . . . . . . . 35
J-36355. . . . . . . . . . . . . . . . . . . . . . . . . 66 J-38381-70 . . . . . . . . . . . . . . . . . . . . . . 82 J-39500-36B. . . . . . . . . . . . . . . . . . . . . 35
J-36400. . . . . . . . . . . . . . . . . . . . . . . . . . 4 J-38381-KIT . . . . . . . . . . . . . . . . . . . . . . 5 J-39500-36K . . . . . . . . . . . . . . . . . . . . . 35
J-36400-1 . . . . . . . . . . . . . . . . . . . . . . . . 4 J-38387. . . . . . . . . . . . . . . . . . . . . . . . . 22 J-39500-36R . . . . . . . . . . . . . . . . . . . . . 35
J-36400-2 . . . . . . . . . . . . . . . . . . . . . . . . 4 J-38424. . . . . . . . . . . . . . . . . . . . . . . . . 44 J-39500-36Y . . . . . . . . . . . . . . . . . . . . . 35
J-36400-3 . . . . . . . . . . . . . . . . . . . . . . . . 4 J-38508. . . . . . . . . . . . . . . . . . . . . . . . . 32 J-39500-48B. . . . . . . . . . . . . . . . . . . . . 35
J-36400-5 . . . . . . . . . . . . . . . . . . . . . . . . 4 J-38522. . . . . . . . . . . . . . . . . . . . . . . . . . 5 J-39500-48K . . . . . . . . . . . . . . . . . . . . . 36
J-36466. . . . . . . . . . . . . . . . . . . . . . . . . 21 J-38550-50B . . . . . . . . . . . . . . . . . . 32, 44 J-39500-48R . . . . . . . . . . . . . . . . . . . . . 36
J-36467. . . . . . . . . . . . . . . . . . . . . . . . . 21 J-38563. . . . . . . . . . . . . . . . . . . . . . . . . 73 J-39500-48Y . . . . . . . . . . . . . . . . . . . . . 36
J-36470. . . . . . . . . . . . . . . . . . . . . . . . . 28 J-38597. . . . . . . . . . . . . . . . . . . . . . . . . 98 J-39500-50 . . . . . . . . . . . . . . . . . . . . . . 36
J-36471-A. . . . . . . . . . . . . . . . . . . . . . . 28 J-38606. . . . . . . . . . . . . . . . . . . . . . . . . 23 J-39500-60B. . . . . . . . . . . . . . . . . . . . . 36
J-36569. . . . . . . . . . . . . . . . . . . . . . . . . . 5 J-38704-A. . . . . . . . . . . . . . . . . . . . . . . 32 J-39500-60K . . . . . . . . . . . . . . . . . . . . . 36
J-36660-A. . . . . . . . . . . . . . . . . . . . . . . 21 J-38750-A. . . . . . . . . . . . . . . . . . . . . . . 32 J-39500-60R . . . . . . . . . . . . . . . . . . . . . 36
J-36777-3 . . . . . . . . . . . . . . . . . . . . . . . . 5 J-38751-95INF . . . . . . . . . . . . . . . . . . . . 6 J-39500-60Y . . . . . . . . . . . . . . . . . . . . . 37
J-36777-4 . . . . . . . . . . . . . . . . . . . . . . . . 5 J-38751-95NI . . . . . . . . . . . . . . . . . . . . . 6 J-39500-71 . . . . . . . . . . . . . . . . . . . 37, 45

To order Special Service Tools call 1-800-662-2001 113


Index
TOOL NO. PAGE NO. TOOL NO. PAGE NO. TOOL NO. PAGE NO.
J-39500-71N. . . . . . . . . . . . . . . . . . . . . 45 J-41777. . . . . . . . . . . . . . . . . . . . . . . . . 67 J-44200-11 . . . . . . . . . . . . . . . . . . . . . . . 9
J-39500-72B. . . . . . . . . . . . . . . . . . . . . 37 J-41810-B. . . . . . . . . . . . . . . . . . . . . . . 39 J-44200-12 . . . . . . . . . . . . . . . . . . . . . . . 9
J-39500-72K . . . . . . . . . . . . . . . . . . . . . 37 J-41817. . . . . . . . . . . . . . . . . . . . . . . . . 28 J-44200-17 . . . . . . . . . . . . . . . . . . . . . . . 9
J-39500-72R . . . . . . . . . . . . . . . . . . . . . 37 J-41995. . . . . . . . . . . . . . . . . . . . . . . . . 46 J-44200-32 . . . . . . . . . . . . . . . . . . . . . . . 9
J-39500-72Y . . . . . . . . . . . . . . . . . . . . . 37 J-42047. . . . . . . . . . . . . . . . . . . . . . . . . 74 J-44200-99NATS . . . . . . . . . . . . . . . . . 10
J-39500-96B. . . . . . . . . . . . . . . . . . . . . 37 J-42056. . . . . . . . . . . . . . . . . . . . . . . . . 24 J-44200-CAN . . . . . . . . . . . . . . . . . . . . 10
J-39500-96K . . . . . . . . . . . . . . . . . . . . . 38 J-42057. . . . . . . . . . . . . . . . . . . . . . . . . 99 J-44200-DIAG-A . . . . . . . . . . . . . . . . . 10
J-39500-96R . . . . . . . . . . . . . . . . . . . . . 38 J-42220. . . . . . . . . . . . . . . . . . . . . . . . . . 8 J-44200-ECMR. . . . . . . . . . . . . . . . . . . 10
J-39500-96Y . . . . . . . . . . . . . . . . . . . . . 38 J-42458. . . . . . . . . . . . . . . . . . . . . . . . . 56 J-44200-Y . . . . . . . . . . . . . . . . . . . . . . . 10
J-39500-120B. . . . . . . . . . . . . . . . . . . . 38 J-42625-280 . . . . . . . . . . . . . . . . . . . . . 74 J-44230. . . . . . . . . . . . . . . . . . . . . . . . . 82
J-39500-120R . . . . . . . . . . . . . . . . . . . . 38 J-42625-300 . . . . . . . . . . . . . . . . . . . . . 74 J-44321. . . . . . . . . . . . . . . . . . . . . . . . . 29
J-39500-B. . . . . . . . . . . . . . . . . . . . . . . 34 J-42625-360 . . . . . . . . . . . . . . . . . . . . . 74 J-44372. . . . . . . . . . . . . . . . . . . . . . . . . 68
J-39528. . . . . . . . . . . . . . . . . . . . . . . . . 73 J-42625-400 . . . . . . . . . . . . . . . . . . . . . 74 J-44373. . . . . . . . . . . . . . . . . . . . . . . . . 10
J-39544-KIT . . . . . . . . . . . . . . . . . . 73, 80 J-42625-SHFT837. . . . . . . . . . . . . . 74, 80 J-44373-PRT . . . . . . . . . . . . . . . . . . . . 10
J-39565. . . . . . . . . . . . . . . . . . . . . . . 7, 98 J-42625-SHFT937. . . . . . . . . . . . . . 75, 81 J-44493. . . . . . . . . . . . . . . . . . . . . . . . . 39
J-39570. . . . . . . . . . . . . . . . . . . . . . . 7, 98 J-42625-SHFT947. . . . . . . . . . . . . . 75, 81 J-44614. . . . . . . . . . . . . . . . . . . . . . . . . 47
J-39580. . . . . . . . . . . . . . . . . . . . . . . . . 24 J-42909. . . . . . . . . . . . . . . . . . . . . . . . . 28 J-44615. . . . . . . . . . . . . . . . . . . . . . . . . 83
J-39599. . . . . . . . . . . . . . . . . . . . . . . . . 38 J-42909-CAN . . . . . . . . . . . . . . . . . . . . 28 J-44716. . . . . . . . . . . . . . . . . . . . . . . . . 25
J-39603. . . . . . . . . . . . . . . . . . . . . . . . . 66 J-42931. . . . . . . . . . . . . . . . . . . . . . . . . 67 J-44946. . . . . . . . . . . . . . . . . . . . . . . . . 68
J-39627. . . . . . . . . . . . . . . . . . . . . . . . . 45 J-42956. . . . . . . . . . . . . . . . . . . . . . . . . 75 J-45033. . . . . . . . . . . . . . . . . . . . . . . . . 68
J-39628. . . . . . . . . . . . . . . . . . . . . . . . . 33 J-42967. . . . . . . . . . . . . . . . . . . . . . . . . 99 J-45073. . . . . . . . . . . . . . . . . . . . . . . . . 81
J-39649 . . . . . . . . . . . . . . . . . . . 33, 38, 46 J-42992-98KIT . . . . . . . . . . . . . . . . . . . . 8 J-45074. . . . . . . . . . . . . . . . . . . . . . . . . 25
J-39688. . . . . . . . . . . . . . . . . . . . . . . . . . 7 J-43241. . . . . . . . . . . . . . . . . . . . . . . . . . 8 J-45178. . . . . . . . . . . . . . . . . . . . . . . . . 11
J-39699. . . . . . . . . . . . . . . . . . . . . . . . . 39 J-43414. . . . . . . . . . . . . . . . . . . . . . . . . 25 J-45212. . . . . . . . . . . . . . . . . . . . . . . . . 68
J-39713. . . . . . . . . . . . . . . . . . . . . . . . . 58 J-43415. . . . . . . . . . . . . . . . . . . . . . . . . 75 J-45218. . . . . . . . . . . . . . . . . . . . . . . . . 68
J-39742. . . . . . . . . . . . . . . . . . . . . . . . . 46 J-43477. . . . . . . . . . . . . . . . . . . . . . . . . 67 J-45219. . . . . . . . . . . . . . . . . . . . . . . . . 68
J-39743. . . . . . . . . . . . . . . . . . . . . . . . . 46 J-43600. . . . . . . . . . . . . . . . . . . . . . 39, 46 J-45295. . . . . . . . . . . . . . . . . . . . . . . . . 11
J-39768. . . . . . . . . . . . . . . . . . . . . . . . . 98 J-43687. . . . . . . . . . . . . . . . . . . . . . . . . 67 J-45353. . . . . . . . . . . . . . . . . . . . . . . . . 25
J-39770. . . . . . . . . . . . . . . . . . . . . . . . . 33 J-43897-12A. . . . . . . . . . . . . . . . . . . . . 25 J-45356. . . . . . . . . . . . . . . . . . . . . . . . . 29
J-39772. . . . . . . . . . . . . . . . . . . . . . . . . 46 J-43897-18 . . . . . . . . . . . . . . . . . . . . . . 25 J-45377. . . . . . . . . . . . . . . . . . . . . . . . . 68
J-39773. . . . . . . . . . . . . . . . . . . . . . . . . 24 J-43926. . . . . . . . . . . . . . . . . . . . . . . . . 47 J-45378. . . . . . . . . . . . . . . . . . . . . . . . . 69
J-39776. . . . . . . . . . . . . . . . . . . . . . . . . 99 J-43980. . . . . . . . . . . . . . . . . . . . . . . . . 75 J-45679. . . . . . . . . . . . . . . . . . . . . . . . . 75
J-39821. . . . . . . . . . . . . . . . . . . . . . . . . 24 J-43994. . . . . . . . . . . . . . . . . . . . . . . . . 99 L-20900. . . . . . . . . . . . . . . . . . . . . . . . . 26
J-39851. . . . . . . . . . . . . . . . . . . . . . . . . 33 J-43995. . . . . . . . . . . . . . . . . . . . . . . . . 67 OF-2513 . . . . . . . . . . . . . . . . . . . . . . . 100
J-39856. . . . . . . . . . . . . . . . . . . . . . . . . 52 J-43996. . . . . . . . . . . . . . . . . . . . . . . . . 67 OF-2533 . . . . . . . . . . . . . . . . . . . . 52, 100
J-39883. . . . . . . . . . . . . . . . . . . . . . . . . 59 J-44002. . . . . . . . . . . . . . . . . . . . . . . . . 29 P-70053 . . . . . . . . . . . . . . . . . . . . . . . . 11
J-39978. . . . . . . . . . . . . . . . . . . . . . . . . . 7 J-44002-19 . . . . . . . . . . . . . . . . . . . . . . 25 RB-14401 . . . . . . . . . . . . . . . . . . . . . . . 47
J-41029. . . . . . . . . . . . . . . . . . . . . . . . . 46 J-44002-24 . . . . . . . . . . . . . . . . . . . . . . 99 RPM-80 . . . . . . . . . . . . . . . . . . . . . . . . 11
J-41056. . . . . . . . . . . . . . . . . . . . . . . . . 24 J-44002-25 . . . . . . . . . . . . . . . . . . . . . . 99 TL-24 . . . . . . . . . . . . . . . . . . . . . . . . . . 11
J-41155. . . . . . . . . . . . . . . . . . . . . . . . . 85 J-44002-26 . . . . . . . . . . . . . . . . . . . . . 100 TOOL-4 . . . . . . . . . . . . . . . . . . . . . . . . . 11
J-41257. . . . . . . . . . . . . . . . . . . . . . . . . 85 J-44183-A. . . . . . . . . . . . . . . . . . . . . . . 67 TOOL-7 . . . . . . . . . . . . . . . . . . . . . . . . . 11
J-41306. . . . . . . . . . . . . . . . . . . . . . . . . 73 J-44200. . . . . . . . . . . . . . . . . . . . . . . . . . 8 TP-20 . . . . . . . . . . . . . . . . . . . . . . . . . . 12
J-41471. . . . . . . . . . . . . . . . . . . . . . . . . 24 J-44200-2 . . . . . . . . . . . . . . . . . . . . . . . . 8 VA-70433 . . . . . . . . . . . . . . . . . . . . . . 100
J-41517. . . . . . . . . . . . . . . . . . . . . . . . . 99 J-44200-4 . . . . . . . . . . . . . . . . . . . . . . . . 8 YA-8616 . . . . . . . . . . . . . . . . . . . . . . . . 12
J-41540. . . . . . . . . . . . . . . . . . . . . . . . . . 8 J-44200-5 . . . . . . . . . . . . . . . . . . . . . . . . 9 YU-5212 . . . . . . . . . . . . . . . . . . . . . . . . 12
J-41616. . . . . . . . . . . . . . . . . . . . . . . . . 74 J-44200-6 . . . . . . . . . . . . . . . . . . . . . . . . 9
J-41709. . . . . . . . . . . . . . . . . . . . . . . . . 33 J-44200-7 . . . . . . . . . . . . . . . . . . . . . . . . 9

114 Nissan / Infiniti Special Service Tools


2002 SPECIAL SERVICE TOOLS

Use this form for both Fax and Mail-In orders


ORDER FORM
Fax: 1-800-578-7375
or
1-810-578-7375
Please print or type clearly to avoid errors.

Ordered By: Ship to: (only if different than ordered by)


Name Name
Dealer Name
Street Address

Dealer Code P.O. Number

City State / Province
Street Address
■ Zip/Postal Code
City State / Province

Zip/Postal Code Daytime Phone Number

Payment Information:
■ C.O.D. ■ Check or Money Order ■ Dealer Account (on approved credit) ■ Charge to Credit Card Below
*Contact SPX for Freight charges Order Subject to confirmation by SPX
Check One ■ Discover ■ VISA ■ MASTERCARD ■ American Express

Expiration Date _________________________________________ Enter Credit Card Number in boxes above

Authorized Credit Card Signature_________________________________________________________________________________________

QUANTITY TOOL NUMBER DESCRIPTION PRICE EACH TOTAL PRICE


Dollars Cents

TOTAL

Total for Merchandise $


www.nissantechmate.com SALES TAX
All states / province add tax $
1-800-662-2001 TOTAL ORDER
or mail to: Total does not include delivery charges.
Actual delivery charges will be added to invoice. $
SPX Corporation, Kent-Moore
28635 Mound Rd. Make check payable to:
Warren, MI 48092-3499 SPX CORPORATION
Notes

116 Nissan / Infiniti Special Service Tools

You might also like