BScEng.(UOP), MEng. (TokyoTech), PhD (TokyoTech) Associate Green Professional (GBCSL)
Department of Civil Engineering
Faculty of Engineering University of Peradeniya Mobile: 0772171984 Email: samithbuddika@eng.pdn.ac.lk Deflection
Eurocode 2 has two alternative methods for checking deflection.
Either: • a limiting span-to-depth ratio may be used or • the theoretical deflection can be assessed using the expressions given in the Code
Span/250 – quasi permanent loading – appearance and general utility
of the structure may be impaired
Span/500 – deflection may cause damage to partitions, fixtures or
finishes limiting span-to-depth ratio The span-to-effective-depth (L/d) method The span-to-effective-depth (L/d) method The span-to-effective-depth (L/d) method The span-to-effective-depth (L/d) method The span-to-effective-depth (L/d) method The span-to-effective-depth (L/d) method The span-to-effective-depth (L/d) method Calculating the deflection of a concrete member Calculating the deflection of a concrete member Crack control Crack control Crack Width Limits Crack control without direct calculations Calculation of crack widths Calculation of crack widths Calculation of crack widths