Professional Documents
Culture Documents
Ilok Coupling
Ilok Coupling
Product Information
Mining Machinery
equipment. Compared to a
staple-lock coupling, it’s simpler,
Q
Specialized Mining Couplings, Adapters and Accessories
Specifications
Q Rated at 6,000 psi (-4, -6, -8,-12, -16, -20, -24, -32, -40 sizes) & 5,000 psi (-48 size) for mining applications.
Q Rated at 5,000 psi (-4, -6, -8,-12, -16, -20, -24, -32, -40 sizes) & 4,000 psi (-48 size) for hydraulic applications.
Q Mining application is described as testing to 300,000 impulse tested at working pressure at 250°F
(+121°C) with no leaks or failures.
Q Hydraulic application is at SAE standards at 133% working pressure, 250°F (+121°C) and at an
Q Tested in accordance with SAE-J343.
Standard Hydraulic Hose
Q
TuffCoat® Xtreme™ plating provides red rust protection that exceeds the 72-hour SAE standard by
1000 percent.
Q
MSHA-approved for underground mining applications.
Gates GlobalSpiral™ family of stems.
Equipment
Gates iLok coupling Coarse, flattened Seal-pack is inside Holes in iLok nut Slots in iLok nut Gates TuffCoat® iLok coupling can
is more compact threads resist seizing the female fitting, less match grooves in accommodate Xtreme™ plating be hand-tightened
than standard staple- caused by debris and prone to damage. female end when fully spanner wrench if protects against and loosened for
Belts
lock coupling. corrosion. tightened, allowing needed to loosen corrosion 1,000 speedy assembly and
passage of a cable fitting. percent better than removal.
to prevent nut from the 72-hour SAE
backing off. standard.
8 8 www.gates.com