Professional Documents
Culture Documents
Film Digitallizer-Calibration Report
Film Digitallizer-Calibration Report
com
CERTIFICATE OF CALIBRATION
Model : FS 50 B
Serial No : 2156732
فرع- .ذ م م-الشركة االوروبية للتعهدات الميكانيكية و الكهربائية اإلمارات العربية المتحدة، أبو ظبي، ٣٥١٦٤ :ب.ص T +971 (02) 678 1133
Euro Mechanical & Electrical Contracting Company LLC – Br. PO Box 46153, Abu Dhabi, United Arab Emirates F +971 (02) 678 1953
www.euromechanical.com
Summary:
This instrument meets all the requirements of the above specification. This calibration may not
be reproduced and applies only to the item calibrated. It should be aware that any known-
unknown factors/conditions might cause the instrument to drift out of the calibration before
the calibration period has expired. We are not responsible & liable for any errors occurring in
future.
Equipment Model FS 50 B
Serial Number 2156732
EPRI Pattern Sl. No #A0034
Test Engineer Vignesh Balakrishnan
Date of Calibration 04 August 2021
Refer Appendix-1 for contrast sensitivity values and these values are the benchmark values for further
Verification of the system.
فرع- .ذ م م-الشركة االوروبية للتعهدات الميكانيكية و الكهربائية اإلمارات العربية المتحدة، أبو ظبي، ٣٥١٦٤ :ب.ص T +971 (02) 678 1133
Euro Mechanical & Electrical Contracting Company LLC – Br. PO Box 46153, Abu Dhabi, United Arab Emirates F +971 (02) 678 1953
www.euromechanical.com
Appendix-1
Contrast Sensitivity
1. Digitize the EPRI Film with 16 bit and 100 microns setting.
2. Measure the Optical Density of each step in Step block C on the digital image of EPRI.
3. Measure the Grey values of each step of the step Block C on the digital image of EPRI.
• These gray values are benchmark readings for the end user for periodic system
performance verification.
• The system shall be able to differentiate each step and the variation of the mean grey
value shall be within ±2275 from the benchmark readings
Note:
a. The measured optical densities shall be within ± 0.15
b. C – is the position of the step
فرع- .ذ م م-الشركة االوروبية للتعهدات الميكانيكية و الكهربائية اإلمارات العربية المتحدة، أبو ظبي، ٣٥١٦٤ :ب.ص T +971 (02) 678 1133
Euro Mechanical & Electrical Contracting Company LLC – Br. PO Box 46153, Abu Dhabi, United Arab Emirates F +971 (02) 678 1953