Professional Documents
Culture Documents
Tom Imp Questions
Tom Imp Questions
Q.5 Draw two Inversion of single slider Crank chain & Explain it
Q.6 Sketch and Explain crank and slotted lever quick return
mechanism
Q.7 Explain Whitworth type quick return motion mechanism with neat
sketch.
Q.8 Sketch and explain any two Inversion of double slider crank chain
same side of AD .link AB rotates at 60 RPM clock wise. Find (a) velocity of link
Q-10 A single slider mechanism has crank and connecting rod 100mm and 400
angle from IDC determine using both method: (1) Velocity of slider. (2)
Q-11 The crank and connecting rod of reciprocating engine are 150 mm and 600 mm
respectively. The crank makes an angle of 60̊ with outer dead centre and
revolve at a uniform speed of 300 rpm clockwise. Find by kleins construction (i)
Velocity and acceleration of the piston (ii) velocity and acceleration of the mid
point of the connecting rod and (iii) Angular velocity and angular acceleration
of the rod.
Q-12 A four bar mechanism ABCD is having AD=120mm as a fixed link, AB=50mm
as a driving link and CD=75mm as a driven link, the link BC=75mm and
∟BAD= 600 , the link revolves at 120 rpm in clockwise direction. Find angular
velocity of link BC
Q-13 Explain with neat sketch Klein’s construction for velocity and acceleration of
Q-14 What is cam & follower? State types of cam & follower and explain with
Q-15 State the type of motions for followers. Explain any one with help of
displacement diagram.
Q-16 Draw cam profile to move the knife edge follower to give 60 mm lift with
SHM. During 120 of cam rotation & it dwells for 40 of cam rotation then I
returns with uniform velocity during 120 rotation & then follower remains in
rest during remaining period. The axis of follower passes through the axis of
Q-17 Draw the profile of a cam to raise a valve with S.H.M. through 40mm in 1/4th
of revolution, keep it fully raised through 1/10th and to lower it with uniform
during the rest of the revolution. The diameter of roller is 20mm and minimum
radius of cam is to be 30mm. The axis of the valve rod passes through the
axis of cam shaft. The cam shaft rotates at 360 rpm clockwise