Professional Documents
Culture Documents
Fan Specification
Fan Specification
FAN MODEL AVH63 AVH71 AVH90 AVH100 AVH112 AVH125 AVH140 AVH160 AVH180 AVH224
Gap between
FANS
blade top and 1,5 mm 1,5 mm 1,5 mm 1,5 mm 2,0 mm 2,5 mm 2,5 mm 3,0 mm 3,0 mm 3,0 mm
fan casing
Casing inner
630 mm 710 mm 900 mm 1000 mm 1120 mm 1250 mm 1400 mm 1600 mm 1800 mm 2240 mm
Ø
Fan casing
5 mm 5 mm 6 mm 6 mm 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm
thickness
Casing anti-
rust 60 μ acryl primer + 100 μ acryl top layer
protection
laser-cut,
Casing
8x50 mm, laser-cut, 10x60 mm, welded laser-cut, 10x70 mm, welded
flanges
welded
Turbu-lence
Guide vanes welded to inside casing + 5 straight longitudinal "fins"
elimi-nation
CE-marking yes
Perform-ance
full test before delivery, capacity measure-ments
test
Allowed
< 2mm/s
vibrations
MODEL GS63 GS71 GS90 GS100 GS112 GS125 GS140 GS160 GS180 GS224
Inner Ø 630 mm 710 mm 900 mm 1000 mm 1120 mm 1250 mm 1400 mm 1600 mm 1800 mm 2240 mm
Outer Ø 790 mm 870 mm 1060 mm 1160 mm 1280 mm 1410 mm 1560 mm 1760 mm 1960 mm 2400 mm
Length 1000 mm 1000 mm 1200 mm 1200 mm 1200 mm 2000 mm 2000 mm 2400 mm 2400 mm 3000 mm
Casing
laser-cut, 8x70 mm, welded laser-cut, 8x80 mm, welded
flanges
Casing
3 mm 3 mm 3 mm 3 mm 3 mm 3 mm 4 mm 4 mm 4 mm 5 mm
thickness
SILENCERS
Sound
absorbing Heavy mineral wool
material
Self support-
ing to fan yes
casing
Casing anti-
rust 60 μ acryl primer + 100 μ acryl top layer
protection
centre
"Super centre baffle, l=800 centre baffle, l=1000 mm, Ø550 centre baffle, l=1800 centre baffle, l=2200 baffle,
silencer" mm, Ø380 mm mm mm, Ø640 mm mm, Ø640 mm l=2500 mm,
Ø640 mm
MODEL GIB63 GIB71 GIB90 GIB100 GIB112 GIB125 GIB140 GIB160 GIB180 GIB224
INLET BELLS
Intake "Bell shaped", pressure turned
Casing
2 mm 3 mm
thickness
Protect-ion
grille "spider
net model"
DUCT ADAPTERS
MODEL GDA63 GDA71 GDA90 GDA100 GDA112 GDA125 GDA140 GDA160 GDA180 GDA224
Length 150 mm 150 mm 150 mm 150 mm 150 mm 150 mm 200 mm 200 mm 200 mm 200 mm
Casing
3 mm 4 mm
thickness
Nominal
11-500 kW
power
FREQUENCY INVERTERS
Electrical
400/440 V, 50/60 Hz
supply
Adjust-able
250 rpm up to full speed
fan speed
Protec-tions motor current, short circuit, phase failure, over- and under voltage
Operating
LED-display with control buttons mounted on outside casing door
controls
Operating
Control buttons mounted on outside casing door
controls
Capsuling IP 54 cabinet
CE-marking yes
Others The starters fulfil the EU-regulations for start of electrical equipment
Optional Circuit breaker, automatic fuses, cabinet heater
Optional Cabinet heater
Nominal
11-132 kW
power
Electrical
DIRECT STARTER
400/440 V, 50/60 Hz
supply
Possible fan
One-speed
speed
Operating
Control buttons mounted on outside casing door
controls
Capsuling IP 54 cabinet
CE-marking yes
Others The starters fulfil the EU-regulations for start of electrical equipment
Optional Cabinet heater