Professional Documents
Culture Documents
VIO3
VIO3
VIO 3 generator module, a high-end unit, for the first time in electrosurgery ERBE offers automatic
output dosage for all regulative technologies :
Multifunctional socket
Monopolar, bipolar, plug and play instruments (e.g BiClamp) or any combination there of
Universal socket
The user-friendly VIO 3 generator module functions as the central control unit, providing the right
amount of power at the right time. Modern regulative technologies provide the optimal power
dosages for the new and improved electrosurgical functions.
VEM2: The VIO extention module has 2 additional sockets allowing you an even greater choice of
sockets. (*optional)
Dynamic adjustment of the modulation frequency makes this new mode ideally suited for exposing
structures. preciseSECT facilitates rapid and effective coagulation with limited tissue separating
properties, in combination with less development of smoke and cabonization. Usually used for
general/visceral surgery, gynecology, urology.
thermoSEAL (Rapid vessel sealing)
With the new AUTOSTART, thermoSEAL is twice as fast as the BiClamp mode. And this mode
permanently measures the tissue parameters while sparing lateral tissue. This makes thermoSEAL
ideal for sealing tissue bundles and vessels up to 7 mm using our instruments as well as for
coagulating bleedings extremely efficiently. Usually used for general/visceral surgery, gynecology,
urology.
This new mode has been optimized for bipolar resection in a saline solution. The power peak system
(PPS) enables rapid incision. The stable plasma facilitates rapid cutting using bipolar resectoscopes.
The fractionated cut with cutting and coagulation intervals. For snare or needle / wire applications in
endoscopy procedures.
Bipolar Cut and Bipolar Cut+/++ for Bipolar TUR for Urology
Bipolar cutting with all the advantages provided by voltage regulation in 8 predetermined cutting
qualities. The cutting current is only present at the target tissue. This ensures more safety and
guarantees precise cuts.
New resect in saline solution with the BIPOLAR CUT+/++ and optimal initial incision (e.g. during TUR)
Support the ERBE BICLAMP. The bipolar clamp for the coagulation/resp. Thermofusion of vessels
with a large lumen and vascular tissue structures up to diameter 7mm and withstand 7x systolic
normal, without dissection and easy to use. The VIO 3 can be adapted to accommodated this
application with appropriate software and hardware modifications. ERBE VIO does not require an
additional electrosurgical unit.
This ugrade will extend the range or your VIO 3, permitting you to simultaneously activate two
separate monopolar instruments for Cardiac procedure.
ReMode
With the modern ReMode activation concept ERBE has developed a “remote control” which is very
user-friendly. Using the VIO foot switch the operating physician can switch between pre-set
instrument setting-without another person having to change the setting on the system. VIO 3 has
selection of up to 6 sub-programs directly from the operating field
NESSY monitors the applications of the patient plate, providing the user with information which is
graphically displayed on the monitor.
Because of its new shape the NESSY Ω Neutral Electrode can be applied irrespective of direction. It
practically precludes the troublesome “leading edge” effect, i.e. the development of high current
densities at the electrode edges, improve patient safety.
Simple, interactive and safe operation using the TFT display and FocusView
VIO support the automatic activation functions AUTO START and AUTO STOP
User-friendly due to tactile feedback and improved ergonomics. Modular design, easier
maintenance. Can be cleaned in the automaticwasher-disinfector
TECHNICAL DATA
Power output
Maximum CUT output : 300 Watt at 500 ohms (with PPS temporary 400Watt)
Maximum COAG output : up to 200 Watt
Safety system : NESSY
Frequency : 350 kHz
Mains connection
Supply voltage : 100 V – 120 V/220 V – 240 V ± 10%
Frequency : 50/60 Hz
Mains current : max. 6.3A
Power input during stand-by : 30 Watt
Power input during max. Electrosurgical output : 550 Watt
Potential equalization connection : yes
Fuse : T 6.3AH/250VAC
Dimensions and weight
Width x Height x Depth : 415 x 215 x 375 mm
Weight : 12 kg
Standards
Classification acc. To the EC-Directive 93/ 42 /EEC : IIb
Protective class acc. To EN 60 601-1 :I
Type acc. To EN 60 601-1 : CF