Professional Documents
Culture Documents
Middle - 02. 190227 - MBF LTE Middle P2.2 - EdenNet Acceptance Test - Rev1.0
Middle - 02. 190227 - MBF LTE Middle P2.2 - EdenNet Acceptance Test - Rev1.0
Revision History
1 General...................................................................................................4
1.1 Purpose...................................................................................................4
1.2 Scope......................................................................................................4
1.2.1 Supported NE versions...........................................................................4
1.3 Recommendations..................................................................................4
2 Overview................................................................................................6
2.1 Test cases...............................................................................................6
2.2 Customer acceptance testing procedures...............................................9
2.2.1 Test execution and evaluation.................................................................9
3 Administration.....................................................................................10
3.1 Administration: Importing a SON Module..............................................10
3.2 Administration: Deleting a SON Module................................................11
3.3 Administration: Module Configuration....................................................12
3.3.1 Configuration of Module Default Values................................................12
3.3.2 Module Priority......................................................................................12
3.3.3 Module Exclusion List............................................................................13
3.3.4 Module User Permissions.....................................................................14
3.4 Administration: Roll back.......................................................................15
3.5 Administration: OSS Access Status......................................................16
3.6 Administration: Accounts.......................................................................17
3.6.1 Adding a User.......................................................................................17
3.6.2 Deleting a User.....................................................................................18
4 SON Modules.......................................................................................19
4.1 Automatic Neighbor Relation (ANR)......................................................19
4.1.1 Automatic Neighbor Relation (ANR_4G_IRAT).....................................19
4.1.2 LTE Automatic Neighbor Relation (ANR) Cleanup................................22
4.2 Reuse Code Optimization.....................................................................23
4.3 Coverage & Capacity Optimization (CCO) – LTE..................................24
4.4 Mobility Robustness Optimization (MRO)..............................................25
4.4.1 MRO - Verify CIO optimization for partial freeze strategy......................25
4.5 PRACH Optimization.............................................................................26
4.5.1 PRACH Fresh allocation with Fixed Reuse distance.............................26
4.5.2 PRACH Conflict Resolution with Relative reuse distance......................27
1.1 Purpose
The purpose of this document is to describe the system acceptance test
cases for Nokia EdenNet.
The test cases are chosen to give as complete picture as possible about
the EdenNet functionality.
1.2 Scope
This document should be used for verification of functionality.
The customer documentation mentioned in the manual can be found in
Nokia Networks Electronic Documentation (NED).
1.3 Recommendations
Always consult the customer and agree which operations can be executed
in the customer environment.
Test execution and evaluation is the process of performing all the system
acceptance test cases and observing the results. This includes setting up
the test environment, executing test cases, and recording the outcome of
the test cases.
The outcome of the test cases will be one of the following:
Pass – There are no observed critical or major incidents.
Not Applicable – The test conditions do not match or customer does
not use the functions
Fail – One or more of the observed incidents are Critical.
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
TEST PURPOSE:
To view the default values of a module and change them as needed.
PREREQUISITES:
Eden-NET is installed and the SON Module is available in the UI.
TEST EXECUTION:
1. Login to Eden-NET UI
2. Navigate through Administration-> Modules-> Select any Module->
Configure->Default Values
3. If needed, select any other value than the listed ones and click Save
EXPECTED RESULTS:
1. Login to Eden-NET UI is successful.
2. The default values are visible to the user.
3. The user is able to make the changes and the changes are visible while
executing the Module.
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
TEST PURPOSE:
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
TEST PURPOSE:
To choose the cells that should not be excluded by the Module.
PREREQUISITES:
Eden NET is installed and the SON Module is available in the UI.
TEST EXECUTION:
1. Login to Eden-NET UI.
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
TEST PURPOSE:
To view/modify the Module User Permissions
PREREQUISITES:
Eden-NET is installed and the SON Module is available in the UI.
TEST EXECUTION:
1. Login to Eden-NET UI
2. Navigate through Administration-> Modules-> Select any Module-> Configure
-> Module User Permissions.
3. If needed, edit the permissions of the user and click Save.
EXPECTED RESULTS:
1. Login to Eden-NET UI is successful.
2. User Permissions window opens and different permissions for the user are
displayed.
3. The user can successfully change the permission and save it successfully.
Date
Name
Status
PASSED □ FAILED □ NOT APPLICABLE □
Date
Name
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
TEST PURPOSE:
To add a User to access Eden-NET.
PREREQUISITES:
Eden-NET is installed.
TEST EXECUTION:
1. Login to Eden-NET UI with admin privileges.
2. Navigate through Administration-> Accounts.
3. Click on Add User and provide the mandatory information, choose the User
group accordingly and click Save Changes.
EXPECTED RESULTS
1. User is able to login successfully.
2. User should be successfully created and should be able to login with the new
credentials.
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
TEST PURPOSE:
To delete a User.
PREREQUISITES:
Eden-NET is installed.
TEST EXECUTION:
1. Login to Eden-NET UI with admin privileges.
2. Navigate through Administration-> Accounts.
3. Click on the User that needs to be deleted and click on the Red Cross mark
indicating to delete the user and click Save.
EXPECTED RESULTS
1. Login to Eden-NET UI is successful.
2. Once the save is clicked, the user is deleted from Eden-NET and can no
longer log in to the UI.
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
TEST PURPOSE:
The purpose of this test case is to verify the ANR-4G IRAT module
functionality.
PREREQUISITES:
1. CM Data. Ensure that CM data is available for the area being tested including
managed objects for existing GSM->WCDMA neighbour relations.
2. Cell Plan Data. Ensure that Cell Plan data is available for all cells in the area
being tested including site location (lat, lon) and antenna details (orientation,
beam-width).
3. PM Data. Ensure that at least 24hrs of KPI data is available for cells in test
area. PM counts for LTE->WCDMA and LTE->GSM handovers per relation
are required to evaluate existing relations for replacement. Per relation counts
for WCDMA->WCDMA handovers and GSM->GSM handovers are also be
utilized by the module to find missing neighbors.
4. Module Configuration. Ensure that a module configuration is loaded with
module parameter values in line with the recommendations provided in the
Feature Description.
5. LMS Configuration. Including:
a. Definition of the allowed LTE->WCDMA and LTE->GSM relations
within each node configuration. This is done in the "rules" section of
the LMS. An example is given below which can be inserted into one or
more node configurations in the LMS. From the layer which matches
the “optional_LTE” definition the “optional_LTE_row_rule1” is used:
"optional_LTE": "optional_LTE_row_rule1",
"templates": {
"lte_gsm": {
"nrControl": "automatic",
"redirWithSysInfoAllowed": "allowed",
"eNACCAllowed": "allowed",
"srvccAllowed": "allowed"
},
"lte_wcdma": {
"nrControl": "automatic",
"csfbPsHoAllowed": "forbidden",
"psHoAllowed": "forbidden",
"srvccAllowed": "allowed",
"redirWithSysInfoAllowed": "allowed",
"removeAllowed": "true",
"utranLbAllowed": "true"
},
"enodeB_UMTS": {
"srvccHoInd": "CSonly"
},
"enodeB_GSM": {
"dtm": "FALSE",
"networkControlOrder": "NC0",
"systemInfoType": "none"
}
},
TEST EXECUTION:
1. Navigate to the SON Modules / Configure page to create a new module
execution
2. Select the ANR_4G_IRAT module
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
TEST PURPOSE:
To verify that LTE ANR Cleanup Module successfully identifies all the
distant neighbors and removes them from neighbor lists.
PREREQUISITES:
1. All the required CM and PM data are available in EMS.
2. Eden-NET is integrated successfully with EMS.
TEST EXECUTION:
1. Launch Eden-NET GUI
2. Go to SON Modules->Configure->LTE_ANR_Cleanup
3. Select any number of target cells - LTE cells
4. Run module with default GUI/.ini setting in “Close Loop” or “Open Loop”
EXPECTED RESULTS:
In case of Open Loop selection:
1. Module run finishes without exception
2. Module caches Cell Data
3. Module caches neighbor data and handover data
4. Module detects intra-frequency neighbors to cleanup
5. Module detects inter-frequency neighbors to cleanup
6. Module generates excel report file
7. Module run finishes without exception
In case of Close Loop selection:
1. Module run finishes without exception
2. Module caches Cell Data
3. Module caches neighbor data and handover data
4. Module detects intra-frequency neighbors to cleanup
5. Module detects inter-frequency neighbors to cleanup
6. Module generates excel report file
7. Module run finishes without exception
8. Verify that module generates xml plan file for neighbor removal
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
Signature
__________________________ __________________________
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Name
TEST PURPOSE:
To verify LTE MRO Inter Frequency optimization by verifying CIO
Optimization for Partial Freeze Strategy.
PREREQUISITES:
1. Ensure that the CM and PM data needed by the SON Module is available.
2. Ensure that there are few intra and inter frequency relations exist with
handover problems
3. Make sure that the relation A->B is on the top of List created based on Cost
function
TEST EXECUTION:
1. Login to Eden-NET lab select run the MRO module with
Optimize_cell_level_parameters option set to False
2. Verify that the EUtranRel A -> B is optimised
3. Verify that all outgoing rels from A and B (Except A->B) are frozen
4. Verify that the next rel(other than the frozen rels) in the List is picked up for
optimization.
5. Verify the Logs and Report
EXPECTED RESULTS:
1. Login should be successful and the execution should be successful
2. A -> B should go for CIO optimization
3. All outgoing rels from A and B are frozen
4. The next rel in the List is optimized and the corresponding cells outgoing rels
are frozen. And the next rel in list is picked up for optimization.
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
TEST PURPOSE:
To allocate PRACH parameters for selected scope according to given
settings for Heterogeneous network data.
PREREQUISITES:
1. Eden-NET is integrated to EdenNet.
2. Create a cluster with LNCELs, where some LNCELs in the scope are of FDD
and some LNCELs are of TDD system type for which new allocation of
PRACH parameters is to be done.
3. Antennas (with co-ordinates) associated with all the LNCELs.
TEST EXECUTION:
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
TEST PURPOSE:
To allocate PRACH parameters for selected scope according to
given settings for Heterogeneous network data .
PREREQUISITES:
1. Eden-NET is integrated to EdenNet.
Status
PASSED □ FAILED □ NOT APPLICABLE □
Comment
Date
Name
(Performed on / / )