Professional Documents
Culture Documents
2019-20 Lathe Machine
2019-20 Lathe Machine
AUTONOMOUS
(Approved by AICTE, New Delhi & Affiliated to JNTU Kakinada, Accredited by NBA)
Dakamarri, Bheemunipatnam Mandal, Visakhapatnam Dist. – 531 162 (A.P.)
Ph: +91-8922-248001, 248002 Fax: + 91-8922-248011
e-mail: principal@raghuenggcollege.com website: www.raghuenggcollege.com
CIRCULAR
Date 16-5-2020.
There will be a one-day Skill Development Program on “Lathe Machine” for the non-teaching
staff of Department of Mechanical Engineering on 20th May, 2020.
In this connection, all the non-teaching staff of the Department are requested to participate in the
Skill Development program
Copy to
1.The Principal’s Office, REC
2.All Non-teaching staff of Department of Mechanical Engineering
RAGHU ENGINEERING COLLEGE
AUTONOMOUS
(Approved by AICTE, New Delhi & Affiliated to JNTU Kakinada, Accredited by NBA)
Dakamarri, Bheemunipatnam Mandal, Visakhapatnam Dist. – 531 162 (A.P.)
Ph: +91-8922-248001, 248002 Fax: + 91-8922-248011
e-mail: principal@raghuenggcollege.com website: www.raghuenggcollege.com
Aim of the Program: To educate the non- teaching staff about parts of a Lathe machine,
working, benefits and various applications.
Photos:
ATTENDANCE SHEET
Report:
A one-day workshop on “Lathe Machine” as a part of the Skills Development Programme for the
non-teaching staff of the Department of Mechanical Engineering, Raghu Engineering College
was organized at the Institute from 10.00 AM to 3. 30 PM on 20thMay 2020. Mr. J. Ramesh
Naidu, Assistant Professor in the department of Mechanical Engineering, Raghu Engineering
College was the resource person of the workshop.
During the first session of the workshop, Mr. J. Ramesh Naidu demonstrated various parts of the
lathe machine, how they work, the preventive and shut down maintenance under various
conditions of failure of the equipment. After the demonstration, the participants were given a
few tasks on these areas and their performance was evaluated and necessary feedback on how to
improve these skills was given.
In the second session, a presentation on the applications of the machine was told. This was
followed by testing of participants’ understanding on some of the given topics. In the last
session, the resource person gave some useful information and tips on the actual doing of the job
and the participants were asked to work on the machine and do the job making use of the tips and
following the guidelines given.