This document provides information about hydraulic circuits and ports for an EC210B LC Volvo excavator, including:
- The valid serial number range for the specifications.
- A table listing hydraulic port names and descriptions.
- Information is intended as service information for technicians working on this model excavator.
This document provides information about hydraulic circuits and ports for an EC210B LC Volvo excavator, including:
- The valid serial number range for the specifications.
- A table listing hydraulic port names and descriptions.
- Information is intended as service information for technicians working on this model excavator.
This document provides information about hydraulic circuits and ports for an EC210B LC Volvo excavator, including:
- The valid serial number range for the specifications.
- A table listing hydraulic port names and descriptions.
- Information is intended as service information for technicians working on this model excavator.
This document provides information about hydraulic circuits and ports for an EC210B LC Volvo excavator, including:
- The valid serial number range for the specifications.
- A table listing hydraulic port names and descriptions.
- Information is intended as service information for technicians working on this model excavator.
Document Title: Function Group: Information Type: Date:
Hydraulic circuits, ports Service Information 12/09/2022 Profile: EC210B LC Volvo
Hydraulic circuits, ports
Showing Selected Profile
Valid for serial numbers
Model Production site Serial number start Serial number stop EC210B LC Volvo
Port connection, component
Port Description Port name Description
name PL Pump P1 port bl4 Left travel servo hydraulic port (forward) PR Pump P2 port al4 Left travel servo hydraulic port (reverse) PR₁ Pressure source of option port br3 Right travel servo hydraulic port (forward) PR₂ Adjustable boom ar3 Right travel servo hydraulic port (reverse) AR1 Boom lower port (small chamber) a Arm conflux signal port BR1 Boom raise port (large chamber) b Boom raise conflux signal port AR2 Bucket curl port (cylinder extend) - large al3 Arm in servo hydraulic port (cylinder extend) chamber BR2 Bucket dump port (cylinder retract) - small bl3 Arm out servo hydraulic port (cylinder retract) chamber BR2 Bucket dump port (cylinder retract) - small R Main return port chamber BL4 Left travel port (forward) Rs1 Slew motor boost port AL4 Left travel port (reverse) Pa Arm regeneration valve port BR3 Right travel port (forward) Py Pressure boost servo hydraulic port (main) AR3 Right travel port (reverse) Px1 Auto deceleration pressure source (travel) AL3 Arm in port (cylinder extend) - large chamber Px2 Auto deceleration pressure source (digging unit) BL3 Arm out port (cylinder retract) - small Po Arm conflux port chamber AL1 Slew port (left) Pd Option 2 stage relief valve signal port BL1 Slew port (right) dr1 Drain port AL2 Option port dr2 Drain port BL2 Option port dr3 Drain port al1 Slew servo hydraulic port (left) dr4 Drain port bl1 Slew servo hydraulic port (right) dr5 Drain port al2 Option (X1) shuttle block port Y Quickfit valve bl2 Option (X1) shuttle block port Fr Negative pump control signal port ar1 Boom lower servo hydraulic port Fl Negative pump control signal port br1 Boom raise servo hydraulic port Ps Arm semi-parallel valve signal port ar2 Bucket curl servo hydraulic port Pb Boom raise conflux signal port br2 Bucket dump servo hydraulic port 3Pi Boom lower holding valve servo hydraulic port 4Pi Arm holding valve release signal port Pi Arm conflux port 4pa2 Boom raise servo hydraulic port Pg1 Pressure source for straight travel and auto deceleration signal (digging unit, travel) 4pa3 Bucket curl servo hydraulic port Pg2 Boom holding valve primary pressure source 4pa4 Arm out conflux signal port R Return pipe 5pb5 Arm out servo hydraulic signal port (Cylinder retract) BL4 Left travel port (forward) AR2 Bucket curl port (cylinder extend) - large chamber